WRT610N dhcp gives wrong IP addresses all the time (on a wired connection only)

Hello

We use a 10.0.0.0/24 subnet for our router. The router is 10.0.0.1 and is configured to assign IP addresses from de.200. Now, while this does very well on the wireless, we get always bad IPs (of the 192.168.1 subnet) when you use a wired connection.

The problem disappeared after only a factory resets, but now reappears. Customers are different from linux clients.

Is the firmware bug?

Arnuschky

Most likely, someone else on another router your network that assigns 192.168.1 addresses.

Do the on two computers once with a 10 addresses assigned, once with a address affected 192.168.

Open a window prompt on your computer. Type ' ipconfig/all '. Then ping the default gateway, for example "ping 192.168.1.1" or "ping 10.0.0.1. Then enter 'arp - a'. After the output is full in each case.

This should show how computers are configured, how and where they get their IP and MAC address of the router/DHCP server.

Tags: Linksys Routers

Similar Questions

  • How fix 'file' does not appear at the point of error on the site? Never had this problem now getting all the time! Why muse connects to my host? Nothing has changed on my end.

    Very annoyed by this "folder" does not seem the point of site error when publishing my sites. Here are the sites I "published" several times with the same login credentials. Now Muse gives me this error with my sites. Anyone know how why it's happening now and how to fix it?

    Muse should be able to create an FTP connection and an HTTP connection to your site in order to validate your sitemap.xml, confirm the support of PHP and confirm redirects htaccess are for synchronized text. If the 'URL of the Site' value is incorrect, Muse will be unable to find the site transferred via FTP to the site URL provided using HTTP.

  • The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

    xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

    Hello gorgonzola1111,

    I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

  • When I opened my Firefox and start typing an address is disspears and when I press the enywhere else it reappears. It happens all the time!

    When I opened my Firefox and start typing an address is disspears and when I press the enywhere else it reappears. It happens all the time! I installed the uprgrade and also did a virus check everything seems ok! I need a solution cause mozilla's browser that fits me better!

    Hello

    Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

    If Firefox is open, you can restart Firefox Safe mode in the Help menu:

    • Click the menu button

      click Help

      then select restart with disabled modules.

    If Firefox does not work, you can start Firefox in Mode safe as follows:

    • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac: Hold the option key during the startup of Firefox.
    • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
      (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

    When the Firefox Safe Mode window appears, select "start mode safe."

    If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. This might help others with the same problem.

  • What happened to the button on the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? I use it all the time and it is not on FF4.

    What happened to the button on the left end of the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? You can look at the drop down window of pages and just choose whatever you want. I use it all the time and it is not on FF4. I want to go back to the old FF.

    If you right click on your back button, or click and hold down the mouse button, it will display the list. (I prefer a click-right, because sometimes my fingers slide when I try to click and hold)

  • Has anyone invented a way to get the emails that went to the wrong email address until the wrong person reads?

    Has anyone invented a way to get the emails that went to the wrong email address until the wrong person reads?

    To answer your question, you have to assume that once you have sent the email that it cannot be recovered. Think of it as dropping an old letter in a message box - you can't get it back once it is in the message box.

    The reasons are not only technological - it security, privacy, legal and political might be too (e-mail can cross multiple international borders).

    One hand practice also, what you want would be difficult because the emails will usually quickly reach their destination server and so can be collected by the recipient of email from this server as soon as sound here.

    By ensuring that you are writing your emails correctly in first place is the best.

  • He done wrong to leave the USB cable all the time?

    To clarify, I like this feature of bedside or desktop clock where you tilt the phone L shaped and clock lights up.

    However, I know with other phones, if you leave the USB cable all the time, this is not good for the battery.

    What is the case with the backflip? I guess because Motorola announce this clock function, it's OK to do so.

    DansDroid wrote:
    

    jack58 wrote:

    To clarify, I like this feature of bedside or desktop clock where you tilt the phone L shaped and clock lights up.

    However, I know with other phones, if you leave the USB cable all the time, this is not good for the battery.

    What is the case with the backflip? I guess because Motorola announce this clock function, it's OK to do so.

    It will not harm the phone, it's the same as if you left your phone connected to your A/C charger.   Once it's charged, it no longer attempts to charge the battery.    --- Dan
    

    Thanks for the reply. I should have clicked the 'right answer' not the answer 'useful '.

    I now have the phone plugged in USB a/c or all day as a desk clock and so I can see alerts when they pop up and have no problems at all.

  • Our computer is running slow and sounds like it runs all the time, then gives error reading disk

    Our computer is running slowly.  Looks like it is running all the time.  It will turn off by itself and I say disc read error.  You need to restart all the time.  A lot of the time, he does not let us start windows.

    Original title: slow slow slow

    Robert,

    Try to run the "chkdsk" how to perform disk error checking in windows 7 http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors

    UTC/GMT is 02:19 on Saturday, November 10, 2012

  • My new macbook freezes all the time, I hard shut - downs, just Mac Tech run diagnostics and say that everything is fine. I think I bought a lemon.

    My new Macbook Air freezes all the time, I do closures hard then it comes back, in general. The tech simply ran Mac twice diagnostics and says that nothing is wrong with it. I think I bought a lemon. Any ideas what I need to do? Is it's better to go to a real Apple store rather than just Mac for repairs/diagnosis? Is the customer service nothing better in a real store?

    The guarantee gives the right to the free phone support for the first 90 days of ownership.

    If you bought the product in the United States directly from Apple (not a retailer), you have 14 days from the date of delivery where to Exchange or return it for a refund. In other countries, the return policy may be different. If you purchased from a reseller, its return policy applies.

  • Pages crashing all the time after updating the OS 10.11.3

    Hello, I have problems with Pages crashing since I received the update OS X El Capitan (10.11.3). Common problems are:

    • Pages could open documents with considerable delays: when I double click on a file, it may take up to 20 seconds before opening the document (at the same time, the only thing running is 2 tabs in Safari with non-intensive websites like Wikipedia);
    • Pages would not open to all documents: sometimes it refuses to open my documents either. When I choose for example a document on the 'Recent' via dock icon Pages list it will not launch it. If I wait for awhile and just click the Pages icon, hoping that it will be launched the document in the background, he brings just to the top of the window with the models as if I wanted to open a new document.
    • 'Missing font"all the time: I did not the latest changes to my fonts, but when I opened a document originally created in Pages (and not a converted copy of an old Word document) it always gives an error message "missing fonts" - particularly associated with Microsoft fonts. I downloaded and installed Cambria and Calibri manually and it fixed the problem... for about 8 hours, then he started again.
    • Beach ball rotation of death during the execution of simple operations: it's exasperating, but every now and then when trying to type or text in bold (and similar), the beach of death ball will appear, making the Pages does not.
    • Crashing before loading the same: when I force quit the app because it did not and then I try to run again, often they no longer again before loading the same. What the...?
    • Impossible to duplicate documents: at one time I thought that it is a certain file at the origin of all evil, so I tried it duplicate several times - which of course caused Pages to plant again and again. Same thing happened when I tried with other files.

    I had a similar problem before and it was fixed to restore the default fonts and removing duplicates in the FontBook app, but unfortunately it did not this time.

    I don't know what is wrong or why. It was working OK just a couple of days. Anyone else have similar experiences with it? Looks like Apple may not come out with an update that doesn't break the workflow of the people. But yay, more emoticons and pictures Live Webcam on the way!

    Because my Pages on El Capitan 10.11.3 v5.6.1 works very well with any of your questions, I believe that it is not Pages, but something out of Pages in your environment operating system as a cache of corrupt police, duplicate fonts, or damaged preferences file. Perhaps it is that you are too many applications running for your memory availability and Pages of hunger. All in due time.

    Let's start with a secure boot that will clear the system and local caches, rebuild the database of the police and then see if it stabilizes your use of the Pages.

    Secure boot

    1. Shut down your Mac.
    2. Press the power button and immediately press on and hold down the SHIFT key until you see the horizontal progress bar. I usually wait until it's an inch along before I release the SHIFT key. Personal touch.
    3. You will arrive at a login window. In the upper right screen, you'll see Safe Boot in red letters.
      1. After you type your password, stop, then press and hold the SHIFT key again once, before you click on the right arrow to open a session.
      2. Continue to hold the SHIFT key until your painting of icons on the desktop.
      3. Because many drivers are not loaded, graphics performance is not optimal, and may feel morose.
    4. Test Pages in startup mode to see if the problems have disappeared.
    5. Restart normally.
    6. Start Pages and open a document.

    Previous post the results of step 4 and 6. Have what improvements (if any) you noticed?

  • Linksys connection shows poor all the time

    When I check my status on my connection why you say poor all the time? I also noticed that there are others that are related to my linkskys and my connection is always ' say poor. How can I get a better connection? Thank you

    Hello

    You really need to be checked in the forums for your version of Windows.

    Answers - Windows Forums
    http://answers.Microsoft.com/en-us/Windows

    ---------------------------------------

    It is more connected to your router that are not in your household? If so, you will need to
    reset the router security. All unauthorized connections are the security risks and also use
    your connection resource. Check with the manufacturer of the router.

    Distance and other interference can affect the quality of the connection. Also check updates
    your WiFi and NIC drivers.

    LinkSys has support and excellent help. Also check the LinkSys forums.

    LinkSys support
    http://homesupport.Cisco.com/en-us/Wireless/Linksys

    LinkSys forums
    http://homecommunity.Cisco.com/community/?category.ID=Linksys

    ==================================================================

    References to Vista also apply to Windows 7.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ====================================================

    After that the foregoing: (here, the NETWORK card and Wifi are interchangeable in the sense that the two must be
    fact that you can do if you first use).

    Follow these steps:

    Control Panel - network - write down of the brand and the model of the Wifi - double click - top
    tab of the driver - write version - click on update driver (can't do anything like MS
    is far behind the pilots of certification). Then right click on the Wifi/NIC device and UNINSTALL
    -Reboot - it will refresh the driver stack.

    If necessary to download drivers on another machine and transfer on the problem computer via
    removable media such as a USB key or CD - DVD.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods
    below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
    found)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
    (Those become your fonts of rescue system manufacturer).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
    7 love the updated drivers.

    ======================================

    If necessary:

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet in Vista (and Windows 7)
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.

  • There is no conectivity with the pxi-8145 or. User1 witness stays on all the time.

    NI PXI-8145 connectivity has suddenly disappeared.  I tried to reset the IP address using the switch NORM/IPRST, but it is still impossible to detect the device.  MAX cannot detect it even if the workstation (PC) detects a network.  Also, USER1 light is all the time (and it's supposed to blink).  What I would do.  Is this a problem in map (PXI-8145) itself? or can be linked to the chassis (pxi - 1031)?  If there is no damage, what might have caused it? is there a Service Center for repair anywhere? How much would it cost?...

    K - lyn,

    The controller never worked properly?  Using FTP, look at the OR-RT/STARTUP folder (type ftp://x.x.x.x/ni-rt/startup in Internet Explorer, where x.x.x.x is the IP address of the controller).  What is there?  If you connect a monitor to it, something appears?  If so, what is on the screen?

    Your User1 light is constantly on.  The LED flashing sequence is documented in the manual on page B1.  Always on is not one of the choices.  When you power cycle the chassis, the controller starts with the LED User1, or it will Flash and then stay on?
    We can start from scratch by uninstalling the software on the controller and put it back.  To uninstall it, manually put the controller in safe MODE (switch S2 - see the PXI - 8140RT manual series pp. 2 - 6 and B-2 for more details).  Right now, starting with S2 switched uninstalls the software.  Switch to normal and then reconfigure the controller.

    What IP settings give you the controller? What version of LabVIEW Real-time using you? What drivers you put on the controller? What are the parameters of the host PC IP? What is in the program that you are using? You call dll or any C code?

  • Internet in stall all the time

    Hi, I have the key above wifi 3G and also the same in the 4G and they drop out or unplug the net at random intervals, I use an antenna and have a great signal but because two of them do the same thing all the time I presume it's something to do with the pc. I use Windows 7 and it's driving crazy me.

    Some help would be great, I have used all the tricks of shooter of poorly integrated into the computer nothing works.

    Hello Shaun,

    Thanks for posting your question on the Microsoft community.

    We need more information about the issue so that we can help you better.

    What is the brand and model of your computer?

    Thank you for details on the question and your efforts to resolve.

    This problem may occur because of corrupted or incorrect network settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Reset TCP/IP and check.
    Reference:
    http://support.Microsoft.com/kb/299357

    If this does not help, then use method 2.

    Method 2:
    Disable the DHCP broadcast flag and check the issue.
    Reference:
    http://support.Microsoft.com/kb/928233
    (Also valid for Windows 7)
     
    To resolve this problem, disable the DHCP BROADCAST flag in Windows 7. To do this, follow these steps:
     
    a. Click Start, type regedit in the search box and then click regedit in the list programs.
     
    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
     
    b. look for, and then click the following registry subkey:
     
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
     
    (c) in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
     
    d. in the Edit menu, point to newand then click DWORD (32-bit) value.

    e. in the new #1 value box, type DhcpConnEnableBcastFlagToggleand press ENTER.

    f. click DhcpConnEnableBcastFlagToggle, and then click change.
     
    g. in the value data box, type 1, and then click OK.
     
    h. close the registry editor.
     
    By setting this registry key to 1, Windows 7 trying to obtain an IP address by using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

    Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

    I hope this information helps.
     
    Please let us know if you need more help.
     
    Thank you

  • with these changes, I can only print a page of print preview ability has been removed I use it all the time when you want to print something on a Web site

    When I was on a website and I tried to print a page, it allows to be a tab that says "FIREFOX" in the upper left corner of my screen, I could click on that tab and I had several options, one was "print" and "print preview". All the time, I use the Preview button before printing to see how the page would look like when I was feeling and how many pages there are. I could then choose to print all or part of an article and adjust it to what I wanted to print. I don't have this tab in the upper right corner. A tab for "open menu" is now in the upper right corner, however, in this menu is only a button 'print '. There is no option for "print preview" and so I can't address that I want to print. I could also adjust margins, etc. of a tab from the view, I can not find too. I really hope there are always options and how I find, where are they located?

    Print this button in Firefox 29 opens in print preview mode first.

  • Firefox sometimes freezes my computer when I go to some sites for about 10 seconds and my hard drive is turned on all the time.

    This happened since I upgraded Firefox 3.6 Firefox 18 when it was released in the 23.0.1 that I have right now. When I go on some heavy such as yahoo news, browser specific websites and my computer will be blocked for about 10 seconds while my HDD is on all the time and the only info on: crashes gives me a link to a page called limitation, which apparently no longer exists. It happens that its manual or automatic cache on size and only seems to happen when its max cache. Depending on the subject: crashes, it happened only 4 times before I went from 3.6 to 18.

    Ive tried turning almost all my addons turned off and that did not work, Ive had harware acceleration turned off for a long time if it's not that. I still have all my plugins off except flash and it does not have anything to do with flash. The report of health of firefox it also count as an accident.

    I worked in fact observe that its almost always the comment system on the pages of Web sites such as disqus. IM blocking them just through them with ghostery and anti-ad element hider.

Maybe you are looking for