WRT610N - disk external DRIVE for Xbox 360 and PS3

I searched through the fourms and can't seem to find this information.  I'm looking for a suggestion on the Setup and the disk external DRIVE via the USB port on the back of the router you can listen to music and videos on my 360 or PS3.  I see that some people have managed to put it in place and I would like to know which external HARD drive that they use.

I want my externall HDD to sleep, but I want that it to wake up when I go to play the music on my computer or 360 or PS3.  Please post what disk external HARD - that someone has found that works.  Or should I just go with a NAS connected on one of the router's ethernet ports?

Any player should work.  I use a WD drives on my own, (although I share with other systems then the xbox).  Actions are implemented for UPnP.  The documentation should be sufficient to implement that.  Make sure the drive is formatted as an NTFS drive, or it is not possible.

In addition, make sure you have the latest firmware (21 January 2009).

Set up the drive (aka format)

Create groups

Create users

Implement UPnP

It should work.

In record time, readers built into the firmware and the timeout when they timeout.  You would not be able to set the timeout on this.  I didn't know all the disks than that.  If you are REALLY interested in saving energy buy a USB solid state with no moving parts.  They turned off immediately after what they read/write.

I hope this helps.

Robin

Tags: Linksys Routers

Similar Questions

  • Will be a disk external DRIVE for the 360 Slim to work on the new 360 E?

    I am interested in getting the new Xbox 360 E model to replace my Slim 1 1/2 year, but I want to keep my external hard drive of 250 GB. Is it possible to buy an E 360 4 GB console and then use my hard drive on it? Or the E-360 is compatible with its own specially designed hard drives?

    The comment forum is not the appropriate place for technical questions, and none of these forums is the appropriate place for questions of the Xbox.  See http://support.xbox.com/.

  • New Mac, same disk external DRIVE for the library; does not see the files

    I reconnected my iTunes library from a disk external DRIVE to my new computer, but iTunes does not recognize my files of the ALAC instead, he goes to the cloud and plays music from Apple things. How can I listen to my files? All the files are there, the library is intact; I changed the path in iTunes. Without result. He always plays with the cloud.

    You do not change the path in iTunes.  Who does as it says which is tell iTunes where media files [new] store. You change the path you launch iTunes by holding down the option/alt key, while the application starts and then choose when prompted the iTunes Library.itl file in the iTunes folder you included if all goes well on the hard disk external.  If everything you have on the outside are media files, then you better head for your old computer fast and get the rest of the library there.  It's the rest of these files in the iTunes folder that make up the other half of the 'library' iTunes needs.

  • Help for the preparation of an emergency on a drive disk external drive via., Dell backup and recovery (DBR) - Basic Version

    I have a laptop Dell Inspiron

    IAM intend to make a rescue disk via., Dell backup and recovery (DBR) - Basic Version

    Now, it says WRT below external link that this process will create two partitions on the hard drive.

    (Wipe all prior content of course.)

    DBR_BOOT (25 MB used out of 500 MB on a FAT32 style MBR partition)

    DBR_MASTER (9.7 GB used off GB 921 on a style of MBR of NTFS partition);

    [See:en.community.dell.com/.../19499639]

    Now, my question is will I be able to save my other files on the external hard drive that I use for the above process?

    (as the above process creates two partitions of 921 GB & 500 MB)

    IAM intend to save a system image from my computer on this disc well also, I have a few 250 GB of personal & video files

    (Iam that will buy a drive hard 500 GB to make the above process...)

    H ipkmishra86,

    You will need to copy your other files on the hard disk before the distribution, you will lose it. When you have completed the process you can put back them on here.

  • Where can I download the driver and software for PC Wireless Gaming Receiver for XBOX 360 controllers?

    Former title: PC Wireless Gaming Receiver for XBOX 360 controllers

    I recently bought the material, unfornately software will not be installed (probably got a broken CD). So I was wondering if I can get a driver online for this specific material. I can't find anywhere.

    Former title: PC Wireless Gaming Receiver for XBOX 360 controllers

    I recently bought the material, unfornately software will not be installed (probably got a broken CD). So I was wondering if I can get a driver online for this specific material. I can't find anywhere.

    If you have Windows 7:

    1. Click Start, right-click computer and then click on Device Manager!

    2 right-click where it says device unknown, then do enter internet driver

    (it will say can not find the driver but below will say pilot research myself to list!)

    3. click on search in the list of drivers, scroll down to the Microsoft wireless controller!

    4. highlight the microsoft controller and click on next, a list of accessories microsoft for game will appear!

    5. click on the receiver Microsoft wireless, and then click Next. (it will say: it is not recommended to install the driver because an unknown Publisher, but if you have installed the http://www.microsoft.com/hardware/download/download.aspx?category=Gaming&type=Gaming software)
    you know that the pilot came from there! and then... ENJOY!

  • Joystick for Xbox 360 is not a driver...

    I bought a game for Xbox 360 Gamestop controller and it does not work. When I plug the usb to the PC, it flashes on and then it lights off.

    Hi Kimi Donis,

    The question you posted would be better suited in the Xbox forums.

    I suggest you to ask your question in the below link:

    Forum on the Xbox:

    http://forums.Xbox.com/xbox_forums/general_discussion/default.aspx

    For more information:

    Contact Xbox Support:

    http://support.Xbox.com/en-us/?XR=shellnav

    I hope this helps.

  • Used the external drive for catalog/photos for months. Yesterday-> error msg: "LR cannot open the catalog"StanLRCatalogRepaired"on"Seagate Drive - LR Photos"because LR cannot save changes to this place. LR catalogs cannot be opened on removable disks,

    Used the external drive for catalog/photos for months. Yesterday-> error msg: "Lightroom can't open the catalog named"StanLRCatalogRepaired"located on the 'Seagate Drive - LR Photos' volume because Lightroom can't save the changes to this place. Lightroom catalogs not opening on the network volumes, removable storage, or read only volumes. »

    The first thing to do is to check if somehow the permissions for the drive Seagate or any of its relevant folders/subfolders has changed somehow (an OS update maybe?)

  • What is the best solution when my external drive for Time Machine is full?

    Hello

    I use the latest version of Mac OS X on my iMac 27 ". I use a drive outside of 3 TB G-Tech for Time Machine backup. Due to my recently many RAW photo images, I have less 8% left storage on my external hard drive, so I'm trying to figure out next steps in what concerns the strategy of external storage and have the following questions:

    • When my external drive for Time Machine is full, it is my understanding that older backups on external hard drive will be deleted to make room for newer backups. If the oldest backups contained pictures (whose records have not changed since the time they are initially stored), then I guess that these photos will be removed from the external drive - correct?
    • If I had to replace my external drive for Time Machine with a new external drive which is as big or bigger than the one it replaces, what should I expect on the size of the initial backup on the new drive? I guess the size of the backup would be exactly equal to the current amount of storage used on my drive hard iMac - correct?
    • Would it not be possible to connect the external drive for Time Machine existing at a new Time Machine external drive so that when the original disk is full, the overflow will be automatically stored on the new external hard drive for Time Machine? (If feasible, it seems that this strategy would maximize my external storage capacity vs just replace external drives.)

    I realize that my first two questions are rather basic, but I don't want to make any false assumptions. The third idea is intriguing and I would like to know if this is a viable option.

    Thank you

    Brian

    older files are starting to get deleted because the disk fills up then Yes, they went

    the backup drive should ideally be 4 times the capacity of your current drive, twice is good but has its limits. Also factor in what you store: a jpeg from the web and a raw photo file are the two images, the size of a is very different. If you work in high-resolution or large native files, or audio files (record pro, no music files) or video production twice the disk fills up very quickly. If you collect photos and JPEG and mp3 files or a handful of videos not so much is necessary.

    I would keep the old drive intact if you want to replace and start over with a new drive, if that's the plan. You have the old data, you can keep it somewhere safe and have a redundant backup which you can reconnect at any time to restore from. Let the new index drive itself with new data and take if from there, in the case otherwise you can copy the backup to the new drive and set the drive as the new source of backup but personally I wouldn't copy of the data, that's my preference, it may not be yours and that's fine.

  • OSX does not automatically mount external drives for a user

    I'm having a problem where external drives are not mounted automatically in one of my user accounts. This is independent of the format of the drive, ability, or port. Driving, if the drive flash, hard drive or SD card, must be installed manually in disk utility. It appears dimmed under external and I select the mount option. Once I do this drive works normally.

    This only happens in one of my user accounts. Into account other external drives come up automatically and displayed in the Finder and the desktop. Users have permissions admin, no parental control is activated. The only difference I know is the user account that does not correctly use iCloud as login.

    The details of the device/osx are:

    MacBook Pro (retina, 15 inch, mid-2015)

    10.11.2 version (15 c 50)

    So far I have used first aid on my boot drive, run Apple Diagnostics (no problem found) and reset the NVRAM.

    Please read this message before doing anything.

    This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

    The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

    Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

    The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Test in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

  • Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.

    Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.  When I got to disk utilities to erase, and then reformat the options are

    1 mac OS extended (journaled)

    2 mac OS extended (journaled, encrypted)

    3 mac OS Extended (respect for case-sensitive, journaled)

    4 mac OS extended (case-sensitive, journaled, encrypted)

    See the information below If you can not back up or restore your Mac with the help of Time Machine - Apple Support

    When you select a drive to use with Time Machine, your Mac automatically prompts you if you need to reformat the drive.

    • If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT).
    • If you use a time Capsule, formatting the drive for Time Machine preferences automatically formats the drive as HFS + Extended (respect for case-sensitive, journaled) with a GUID Partition Table (GPT).
  • Migrated my external drive for 'Photos' photographs - after a month of success now unable to access them. No idea why?

    My computer tells me I have migrated my photos from an external drive for 'Photo', but in 'Photo', I can only find 4 pictures that are on my internal drive. Any ideas? I was able to access the photos a month in "Photo".

    Thank you

    Bruce

    Nope - we can't see you, so you must provide details for assistance

    What has changed since it worked?

    If you launch pictures while holding the option key, you get a window select Library - check every library here and I hope that you find the right pair

    LN

  • Is there a new wheel wireless for xbox 360?

    Tring to find out if there is a new wheel wireless for xbox 360?

    Hello

    The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
    If you need to contact them.

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    XBox LIVE - Service status
    http://support.Xbox.com/en-us/Xbox-Live-status

    Manage the XBox Live account
    http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

    XBox Live Sign-in problems
    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Rumors of new device for xbox 360 that allows players to play the Kinect in less space?

    Will there be a new device for xbox 360 that allows players to play the Kinect in less space?

    Hello

    You will need to check with the XBox Forums.

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    XBox - Kinect
    http://www.Xbox.com/en-us/Kinect

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • cannot fill connections for xbox 360 on my home pc with vista

    I'm really bad at bridge my connections to go on xbox live! IM using vista 32 bit and I have the image of ethernet and my conection internet when I try to fill happens to create a network connection, I need to select at least two LAN or HIGH SPEED INTERNET CONNECTIONS WHO DO ARE NOT CURRENTLY USED BY SHARING of INTERNET CONNECTION with... now my home pc has no wireless so is there a way I can do please help

    I recommend you to get a new router, ethernet and wireless on this subject.  Who would set will cost you about £40.  Looks like you got just an ADSL USB modem at the moment.  Which, as you have noticed can be kind of annoying, and it's something that will only get worse in the wire of the time that you want to hang more things on the internet.

    You can use sharing of internet connection - which will transform your PC into a router, but in my opinion, you'd be better off with a long time dedicated hardware router.  Use internet connection sharing, you will need to cross style ethernet cable that goes between the PC and the Xbox 360 and you would need to go to the Network Center and sharing-> change map settings-> right-click on your key USB modem go to properties and there you can enable internet connection sharing. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

  • Xbox 360 and Windows XP Media Center Edition 2005

    Hello

    Hoping to get help with this, because I searched everywhere and had not found an answer.  All the work around the items, reference Windows 7 and 8 not XP my Dell Dimension C521 shipped with Windows XP Media Center Edition 2005 pre installed.  I've upgraded to SP3 of XP.  A friend of mine gave me his old Xbox 360 (bought a new unit).  When I try to connect to the XBox 360 I get an error message in media library "uninstall the update for media center 2005 and then re-install the update of the site Web of Windows update.  Then, re-run Setup for Xbox 360'

    I checked in my under settinds program control panel, but don't see any element for Media Center 2005, even with show checked all of the updates.  I don't see Media player listed and 2 updates for it.  I have disabled the Windows Firewall did not help.  The Xbox 360 test shows that I can connect to the internet, Xbox Live (no NAT problems) and PC running Media Center.  It fails on the media center connection test.

    I don't want to reinstall all of the Dell backup image software supplied with the camera, I'll have to back up and start over.  Any help is welcome!

    Thank you

    Matt

    Hello

    Thanks for posting your question on the Forums of community of Microsoft.
     
    I suggest for the link and follow the steps in the article:
     
    Error message when you try to install a program for the Xbox 360 Media Center Extender in Windows XP Media Center Edition 2005 with Service Pack 3: "There is a problem with the installation of Windows XP Media Center Edition 2005"
    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    322756 (http://support.microsoft.com/kb/322756/ )
    How to back up and restore the registry in Windows.
     
    Also see Help links:
    Turn your Xbox into Windows Media Center Extender
     
     
    Windows Media Center on the Xbox 360
     
    I hope this helps.

Maybe you are looking for

  • MacBook Pro SSD 7.1 more slow speed 200 MB

    Hey,. I bought an SSD of Sandisk and 480 GB (http://www.amazon.de/SanDisk-Plus-480GB-Interne-schwarz/dp/B018X8LB2G) with a speed of 480 MB/s reading and writing speed of 400 Mbps. I compared with Blackmagic Disk Speed Test and the result seems to be

  • Open a url in icloud app on ipad

    I saved a couple of URL in icloud for my computer. When I want to open these URLS from the icloud on my ipad app it does not work. When I press article it will not open in safari. It shows the title I gave to the url (it does not even show the url, o

  • DAQmx folder in missing \vi.lib\

    I'm trying to run DAQmx screw on a new install of SP1 LV2014 (DAQmx drivers 14.5.1) but the installation does not create the DAQmx folder in the vi.lib so my screws (developed on another machine) cannot find screws required DAQmx. I also have a LV201

  • Installation of Windows operating system by USB key.

    I want to know what type of format of the operating system (such as image bootable cd or other) we save in USB to computer can boot boot by USB key because I don't have a CD-ROM or dvd drive.

  • I typed in the wrong inmail Server

    I typed in the wrong inmail server on my mailbox. How can I fix?