WRT610n - laptop can't find N-signal

Hello.

I hope someone can help out me.

I just bought the WRT610n and want to connect with my Asus UL30vt, which has an Intel Wifi Link 1000 BGN wireless card. I can only connect/search the 2.4 Ghz network and not the 5 Ghz. However, I also have a WET610N bridge that can connect to the WRT610n using the 5 ghz N band. Therefore, the problem must be with my laptop. I have little confidence in Asus being able to solve this problem, and I hope someone here can tell me if I can change any configuration in the WRT610n which will allow my Asus UL30VT to connect using the fastest 5 Ghz N Strip.

I'll use Setup to stream multimedia content from my laptop to my PS3, where the WET610n is attached to, and that's why I need the high bandwidth...

Thanks in advance...!

Topper.

As you wrote that you have a "Intel Wifi Link 1000 BGN" card, which means that it is not compatible with 802. 11A, which means that it does not support the band 5 GHz. It is a single band, 2.4 GHz adapter only.

Tags: Linksys Routers

Similar Questions

  • Wireless laptop can not find the wireless Officejet 6700 printer

    My laptop can't find my wireless printer Officejet 6700.  Printer is on the wireless network but the laptop cannot find it.  Laptop the wireless.  Have cisco router on my NBN skymesh satellite.  Have you tried printer setup in the control message panels reads:-printer is not found.  Using windows 7.  Have tried to use scan doctor, turning his router unpluging printer and electrical power to the router. Still no luck.  Printer is about 1 meter portable.  Do I have to set up a home network and connect like that.

    If you can easily plug the printer into the router using an Ethernet cable, who always beats wireless!  Try it!

  • My laptop can not find wireless networks

    My laptop can not find wireless connections, that it works fine when I use an Ethernet cable.

    It works on 64-bit windows and has a intel wifi link 1000 series

    The most likely reason is that the wireless card is turned off or disabled.  Most laptops have this feature in order to save battery power if the wifi is not necessary.  Depending on your laptop, it is a physical switch or a combination of the Fn key and one of the F keys.  See your User Guide for more information.

    You can also check the Device Manager (click the ORB start and type Device Manager and then press the Enter key).  Expand the "Network adapters" section by clicking on the arrow to the left and then double-click the entry for the Intel Wifi Link.  Check 'Device status' in the 'General tab '.

  • Windows Media Center can't find digital signals

    Why microsoft is located on their products

    I have the media center of vista and I can not get digital signal; I searched for 3 hours trying to find updates or what ever may help and what I find is a stupid idea and eventually find a Ko but it is not for my product!

    Microsoft then why no update for media center don't why no help substantal for media center. Why do you persist in telling lies on the products (vista, media center) when they just are garbage?

    I have the media center of vista and I can not get digital signal...

    I don't know if this reflects the problems you are having, but I had a similar problem with Windows 7 Media Center and my Tuner of TV Hauppauge WinTV HVR950Q. I know that I have entered digital HD but Media Center it would not recognize despite repeated attempts and various configuration changes. Finally, in total exasperation I changed my position of my real Canadian position at one South of the 49th parallel (e.g. American). My digital signal was instantly recognized within the TV configuration.

    Someone needs to inform Microsoft that the Canada in digital TV effect and actually had digital broadcast metropolitan centres required by law since August 31, 2011. Maybe the program should be renamed media library.

  • Computer Vista laptop can't find printer home network connected to my computer (XP) on the network

    Original title: network printing

    my laptop (Vista) can't find my printer home network connected to my computer (XP) on the network. any advice?

    Hi Ihawktoo,

    1. don't you update the printer drivers for Windows Vista?

    2. were you able to print on Vista before with no problems?

    Share a printer requires a few steps.

    Make sure you have shared the printer that is installed on the Windows XP computer.

    Open file and printer sharing and share the printer.

    You can check the following items and check if it helps to solve the problem.

    Share a printer

    Troubleshoot file and printer sharing

    Network printer problems

    Hope this information is useful.

  • I can't reinstall my acer built in webcam on my computer acer laptop. can't find it! How can I reinstall?

    I have an acer laptop with windows 7 in there and I tried to get the built in cam sex to work and I uninstalled it and I can't find any and is not in the Recycle Bin. How can I get that back? Is there a site I can go to install it in my programs? my laptop did not come with a disc and the cam was preinstalled. don't know what that I'am do at this point. I presume that Skype will not work without it! =/

    This has been answered in your other thread. It is best to ask in one place, but here is the answer again.

    Go here and find your computer model and download the proper driver...

    http://support.Acer.com/us/en/default.aspx

  • Refreshed laptop, can't find Windows 8.1 on the app store?

    Hi all

    I updated my laptop yesterday. When he finished, and I had set up my mobile phone as I wished, I opened the app store to download windows 8.1. The only problem is, he's not here! Help, please.

    http://Windows.Microsoft.com/en-AU/Windows-8/why-can-t-find-update-store

    Why I can't update in the store?

    Although the Windows 8.1 update is downloaded and installed from the store, your Windows PC needs updates, 2871389 KB and KB 2917499, until Windows 8.1 is available in the store.

    or

    As you refresh the laptop, you may also need to update the content in the store.

    See the link above.

  • my printer will not get the wireless signal and so my laptop can not find print, what should I do?

    How can I make the printer get the wireless signal?

    1 Microsoft do not have printers - so it would not be my first option to ask in the forums to help MS.

    2. we have even less likely to help when you do not tell us what printer, what operating system, what router wi - fi or anything!

    I suggest that you follow the instructions in your printer manual, with operating instructions of your wi - fi router to work things out.  You should connect the printer via a cable to the wireless installation.

    If stuck try the support forums on the Web site of the manufacturer of the printer with the forums on the website of the manufacturer of the router.

  • My laptop can not find IP address

    My laptop (XP) worked in harness wi - fi with my PC (W7) years.  Suddenly, he is unable to find the IP address, even though it recognizes the network and has a strong signal.  Windows repair cannot sort.  I turning the router off & save and verified that the card in the laptop is OK. Cannot use ipconfig on the laptop, because it says media disconnected.  No probs with the PC.  Advice on what I can try would be welcome. Thank you

    Hi David, York

    Thanks for writing about the Microsoft Community Forums.

    According to the description, I see that your laptop is not able to recognize the IP under Windows XP.

    To help you better, please answer these questions:

    1. what IP address you are trying to recognize?

    2. what happens when you try to recognize the IP?

    3 have there been any changes made on the computer before the show?

    I suggest you to follow the article provided to solve the problem:

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

    You can also disable the third-party security software because it could block the network.

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.

  • C510a: C510a software will not install on the new Dell laptop - can not find USB ports

    I just bought a new laptop Dell 7710, running Windows 7.  When I try to install the driver software for my printer HP C510a, Setup performs a check of the system and tells me that I don't have a USB port, and the option that provides the installation routine is to interrupt the installation.  I have 4 ports USB 3.0, which work very well with any other USB device that I've plugged into them.  I downloaded the latest version of the software C510a driver and still have the same problem.  I really same useless USB port on the printer because I connect via my WiFi network.  I run HP diagnostics in order to try to identify the problem and that they can find the printer and identify it on the WiFi network, and they also recognized as USB ports.   But the software C510a stilll don't have USB ports and refuses to load.

    How can I get HP to fix their software driver for a product that is not common, but always prints as well as ever?  It is also mute to require the presence of a port which is not required to connect to the printer.  If I replace theis printer in order to print from this computer, the replacement will certainly not be another HP.

    Hello.

    Inside, File Explorer type folder in the address bar and press ENTER.

    Search the last HP installation file that begins with 7Z (e.g. 7zs1234)

    Open the installation folder.

    Find the file usbready.exe and rename it to usbready.old

    Browse a level upwards and double-click Setup.exe, now follow the installation and check for the difference.

  • HP Pavilion dv6000: HP laptop can't find network driver

    I tried to locate the network adapter driver correct (the wired, not wireless network, which works very well) to Windows 7 for this laptop.

    I tried the drivers from nVidia (several of the legacy/nForce drivers) but in Device Manager it still says "this device cannot start. (Code 10) "(this is for the"NVIDIA nForce Networking Controller"entry, similarly he mistakes even for HP I tried.)

    Here is the list I have already experienced:

    HP:

    * sp45169.exe (error but is not displayed anywhere)

    * sp48125.exe (fails "not for your system" - looks like it is Vista only)

    NVidia:

    * 15.23_nforce_winvista64_international_whql.exe

    * 15.58-nforce-winvista-win7-64bit-international-whql.exe)

    In Device Manager, the info is indicated on the adapter:

    Hardware ID:

    PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C & REV_A2
    PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C
    PCI\VEN_10DE & DEV_054C & CC_020000
    PCI\VEN_10DE & DEV_054C & CC_0200

    Device Instance path:

    PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C & REV_A2\3 & 2411E6FE & 1 & 50

    Any ideas?

    Hello:

    This driver should work...

    This package provides the driver for the NVIDIA nForce Chipset AR in the notebook models and operating systems.

    File name: sp37730.exe

    Here's a partial copy and paste the ethernet driver installation folder of the file of information that shows this driver supports this hardware ID.

    [Manufacturer]
    NVIDIA % = Nvidia, NTamd64

    [Nvidia.NTamd64]

    % NVENETFD. DeviceDesc % is NVENET65. NDI, PCI\VEN_10DE & DEV_0450
    % NVENETFD. DeviceDesc % is NVENET67. NDI, PCI\VEN_10DE & DEV_054C

    You can also read through this guide to upgrade Windows 7 dv6000 for advice on how to get W7 working on your PC.

    http://h30434.www3.HP.com/T5/printers-archive-read-only/Windows-7-upgrade-guide-for-dv6000-DV9000-models/TD-p/179816

  • My laptop can not find my Deskjet 1050 has to scan a document, help!

    Hello

    My printer (HP Deskjet 1050 A) does not connect to my computer samsung laptop.

    IM using windows 7.

    I open the HP Printer Wizard and go to the tab at the top saying 'Print & Scan '.

    I then clicked on "Scan a document or photo" and my laptop comes with the message "The HP Deskjet 1050 J410 series was not found"

    The printer is connected to the electric network and is connected to my lapop via USB. I tried to print a document to check the connection and it prints well, I also scanned and printed using the printer functions and which also works fine.

    Help, please!

    Thank you very much in advance for your help and advice!

    Welcome to the forums of Lorna!

    I understand that you are unable to scan from your Deskjet 1050a however, you can print successfully. If the full version of the software is not installed, the scan function will not work.

    First of all, please running the full installation: software HP Deskjet full functionality and drivers

    You can also try to run the HP print and Scan Doctor to see if it will fix the problem of scanning. If there is a problem more serious that the tool cannot fix, it will warn you. Please let me know the results!

    Let me know how it works for you!

    Happy Friday

  • my new laptop can not find the driver for HP laserjet CP1215. Any suggestions please?

    Phone is a Samsung NP300 E5A

    Hello

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    Good luck, you need to update or reinstall the latest driver.

    HP Color LaserJet CP1215 printer - drivers<- set="" to="" your="" version="">
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3422476&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP Color LaserJet CP1215 printer - support and troubleshooting
    http://h10025.www1.HP.com/ewfrf/wc/product?product=3422476&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP support/troubleshooting & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =============================================

    The main issue is probably the drivers, but these can help:

    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Find the manufacturer's Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Laptop can't find the router.

    Yes. First of all I'm not so technical so... I'm sorry. Fancy talk and internet would very likely confuse me.

    First of all, I bought a WRT54G2 router. Staples clerk assured me that I would be able to connect laptops to my sister and me to the internet.

    I've implemented exactly as has been charged by the CD, however when I on my laptop and "View available wireless networks", the router does not appear on the list. Despite this, I managed to connect my Nintendo DS to the internet. So... where the problem lies, and what do I do?

    Open an Internet Explorer browser on your wired computer(desktop/laptop) page. In the address bar type - 192.168.1.1
    Let the empty user name & password use admin lowercase...
    For wireless settings, follow these steps: -.
    Click on the Wireless tab
    -Here, select manual configuration... Wireless network mode must be mixed...
    -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

    -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
    Please take note of the name of the wireless network (SSID) because it's the network identifier...
    For wireless security: -.
    Click the sub-tab under wireless > Wireless Security...
    Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
    Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
    Please note the 1 WEP key as it comes to the security key for the wireless network...

    Click the settings advanced wireless
    Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
    Now let's see if you can locate your wireless network and try to connect...

  • my laptop can't find my internet hub

    Basically, I Don t know if I have any virus' or something else that I have a few peoblems. the first is that on my laptop, I forgot what my password person so tthat, it is difficult to do something. and I really need to get on this account.

    Second, I can not connect to my internet hub.
    third, I can't get on the internet through this.if you can help, I would be so grateful! Thank you!!

    Hello

    1. are you using cable or wireless network?

    2. what happens when you try to connect to the Internet?

    3. which antivirus app do you use?

    I suggest you try these methods and check the status of the issue.

    To fix the administrator account:

    Microsoft's strategy concerning lost or forgotten passwords

    http://support.Microsoft.com/kb/189126

    Internet connection problem:

    Method 1:

    Using the troubleshooter from network in Windows 7.

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2:

    Wi - Fi and in Windows network connection issues.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    To fix the anti-virus:

    I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

Maybe you are looking for

  • Failed disk Seagate used CD of HP recovery and windows won't complete installation...

    Hello long player date people initially displays...... I have an older machine of the HP A6567c... that has been modernized with almost new under the motherboard, processor and ram... Ive swapped the power provides the gpu and of course HD... heres s

  • Computer just Shut Down

    Signature of the problem: Problem event name: BlueScreen OS version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 More information about the problem: BCCode:                                               116 BCP1:                                             

  • Cannot open emails from IncrediMail

    * Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs I use Windows 7 and use IncrediMail to my e-mail address. Emails come but does not open and a few times the window freezes,

  • How much time does it take for creative cloud activation occur after the order?

    How much time does it take for creative cloud activation occur after the order?

  • Regexp_replace help

    Hello:I have a string which will be composed of 1 to 3 rooms.  The first separator will be 1 or 2 brands of ' / '.  I have a regular expression, which works for most of the data, but not in a particular case, and I don't know why.  In the case below