WRT610N trouble: cannot share the HARD drive

Hello!

The problem is that I can't share HARD drive connected to my WRT610 via USB. The system continues to say "can not find the network address. I use XP with Service Pack 3. I tried all the instructions of the different forums (this statement too - http://www6.nohold.net/Cisco2/ukp.aspx?pid=10&login=1&app=search&vw=1&articleid=17419&donelr=1). I tried 2 different HDD-WD My passport Essential 500 GB and 2 TB of Seagate. Without success.

HARD drive sharing is one of the main reasons why I chose this router. If it doesn't work, I have to buy a new one.

I'll be happy to hear any suggestions at all.

Thanks in advance.

Reset of the router for 1 minute, power cycle the router and check again. Make sure you remove the HARD drive before resetting the router...

Tags: Linksys Routers

Similar Questions

  • Satellite L305D S5895: Win 7 cannot find the HARD drive or cannot format the HARD drive on a clean install

    I have laptop Satellite L305D S5895 of the customer. It was delivered to me by the customer who tried to install Windows XP Pro, Vista and none would install.
    He said he tried all the CD that he had finally dropped on it and delivered it to me installation.

    When I got the score have been removed, so I tried to install Win 7 and when I do a custom install, I get an error indicating that the hard drive can not be formatted on disk 0 or it will give an error that no hard drives have been found.

    I have reset the bios default and no matter what I do, it won't format or find the hard drive. I was going to upgrade the bios, but the only way I found to upgrade the bios is once windows is installed.

    Everyone has ideas about this laptop so I can get a system installed. I checked the bios and there is no parameters for a sata, raid or IDE disk drive, so it seems that this version cannot be changed.

    Thanks for anyone who can help you.

    Rick

    Hello

    First of all it is an American notebook series.
    [Satellite L305D-S5895 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2144776& rpn = PSLC0U & modelFilter = L305D-S5895 & SelCategorie = 3 & selFamily = 1073768663]

    The laptop supports a processor AMD and ATI chipset.
    This means that the drivers SATA is part of the ATI graphics card driver.

    You must include the first SATA driver in order to install the Windows operating system.
    You could add the SATA driver for the Windows disk using software like nLite / vLite

    Welcome them

  • Windows xp Setup cannot format the hard drive

    Original title: windows xp installation

    I had to change hard drives, I went to load my copy of microsoft windows xp and it tells me it cannot format the HDD how many times can we use the xp disc? Or whats wrong?

    Hi Joshua6495,

    What is the full error message that you receive?

    See the article below, which deals with a similar question

    During installation, you are unable to format a Partition with a file Allocation Table Format

    http://support.Microsoft.com/kb/301340/

    You can use the Windows XP installation disc as many times as you want on the same computer

    Note: All programs on the computer and the data will be lost if you format the hard drive. It is recommended to make a backup of your data before performing any Installation of Windows.

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer

    ---------------------------------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Re: My laptop does not start, it cannot detect the hard drive

    I'm having the same problem but a bit different. I noticed that the support said to replace the hard drive and that's what I did with a disc Windows 8.1 and I took a step after test and see if my hard drive is not really usable. I put it in another computer that is also running Windows 8.1. It worked but my origianl computer still does not work, it says always "no drive detected". What the heck!

    think at this point, the best thing to do for you what we call. It is perhaps that the computer is a little less than a year and is still under warranty. Whatever the case, a technical support professional phone can certainly discuss your options with you.

    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number

    File number and phone number are displayed.

  • The installation of XP Pro cannot find the hard drive

    The machine is running XP Pro 32-bit, and I am "upgrading" to 64-bit to work with AutoCAD.  When I boot on the 64-bit Setup installation CD can not find the hard drive and the demolitions.  The drive is already formatted to NTFS.

    You try to install on a SATA drive or your disks are on an add-in controller card and the Windows XP Installer x 64 doesn't have the required driver for the controller so it can't detect the drive.

    You have three options:

    1 - Use the F6 method to provide the installer for Windows XP x 64 mass storage drivers.  Drivers MUST be provided on a floppy disk, the Setup program will not accept the drivers from other media sources.

    2 - enter your CD of Windows XP x 64 drivers.  Note you will find reference to SP3 slipstreaming your Windows CD which you can install Windows on a SATA drive, but please note that Windows XP x 64 doesn't have a SP3, SP2 is the latest service pack for Windows XP x 64.

    3 (for the integrated SATA controllers) go into the BIOS and put the controller in IDE, most motherboard with SATA controllers mode on Board have an option to do this.  When mode IDE Windows XP Setup will see the drive and you will be able to install Windows.  Once Windows is installed, you will be able to install the SATA drivers from the installation of Windows XP operational.  You install the SATA drivers before changing the SATA mode controller in the BIOS, or when the Windows boot up upward a BSOD with a 0x7b error.

    John

  • I'm trying to interconnect a XP home and a XP Pro with a Firewire 1394 through a Maxtor One Touch 4 Plus HARD drive cable to share the HARD drive and also run a home network.

    Is it possible for me to take the files of XP Home that has installed 1394 controller and use the 4 files that I found marked 1394 in I386 to form the controller on my XP Pro, more driver 1394 in \WINDOWS\System32\DRIVERS to close the loop and enable the ethernet connection both 1394 on both computers to have two computers connected to the Maxtor One Touch 4 Plus as well as HARD drive the network. I was hoping maybe even replace the ethernet cable and use the connection 1394 through the Maxtor which has several types of connectors on it.  Again, I am trying to install a controller 1394 on a computer that has no 1394, than USB 2.0. so that the XP Pro machine will recognize the 1394 card with my home XP firewire cable to the Maxtor HDD which it is already connected to the XP Pro via USB 2.0? I have you confused yet?

    I found a post of S.W. video dated the 05/01/11, which has been handled by Gokul T and treated with the Firewire cable and video on a newer operating system, so I thought I would test Gokul T or someone else to resolve this situation. I couldn't find a controller IEEE 1394 I could just download and install on my XP Pro machine. These are the two Dell, is an inspiron 5100 with installed 1394 with taking and the GX280 is one without the 1394 controller installed, or the socket.

    You will need a firewire to XP Pro card. The drivers are already on the hard drive. Once the card is installed, you will see the icon of the network for this adapter. So you can use it.

    The reason why there is no 1394 net adapter on XP Pro is now, because there is no firewire card

  • M6-1105dx cannot detect the hard drive

    my machine is m6-1105dx with Windows 7. It cannot start with an error "boot device not found, please install an operating system on your hard drive. The error number is 3F0 and he recalled by pressing F2 for system diagnostics.

    In diagnostic tests, memory test works fine, but the hard disk check gives error "SMART Check: NOT INSTALLED; "DST short: DO NOT INSTALLED."

    I tried with two different hard disks and there were mistakes. Anyone know what is happening?

    Assuming that hard drives are actually showing good on another PC, then the SATA cable may be bad, does not have the connections, or the contoller is bad.  I would like to start by refuse as those first several elements - HDD, SATA cable, connections, etc are good.  If it is the controller, it is not easy to repair on a laptop.  Probably needs a new motherboard.  I used something similar to THIS to make sure that the disc is good or not.

  • Cannot rename the hard drive partitions.

    Original title: cannot rename.

    I can't rename my portions of hard disk. When I rename it. It changes automatically in the local drive.

    in the my computer window

    Open Windows Explorer. Click on 'Computer' in the navigation pane. Right click on the partition that you want to rename. Click on properties.

    On the general tab, click in the name field. Type your name. Click 'apply '. You may be asked to provide administrator credentials. If you are, do. Click OK.

    Work here...

    If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
    My Blog

  • Cannot expand the hard drive of a Server Windows 2003 VM

    Unable to increase the hard of a Win 2 k 3 server VM 15 concerts in 30 concerts

    Increased the size of the 30Gigs VMDK file, checked on the ESX server console file vmdk-dish shows 30 concerts

    seal the vmdk on another virtual computer file and he started, partition of concerts of two shows 15 disk management is active another is not allocated, extend part of disk does not work for this disc error "selected Volume cannot be extended.

    Tried to remove and attach the file on another virtual computer same error

    Please need help to get VM hard drive has increased for an installation of the patch app

    I wouldn't recommend VMware Converter. It is not supposed to copy all your data only to resize a disk so that you can use extpart or gparted for do it for you.

    http://blog.Baeke.info/blog/technologies/VirtualMachines/_archives/2006/11/4/2472141.html

    It is pretty easy, as you can see.

    Duncan

    VMware communities user moderator | VCP | VCDX

    -

  • Portege M400 - Windows XP cannot find the hard drive

    Hello

    Ive got a Portege M400 who im looking to get a new one, I never had the Tablet XP CD so im trying to install using an XP Pro disk, but whenever I get no hard drive can be detected and I tried another disc of publishing house also.

    Ive looked for SCSI / SATA drivers but can only find RAID drivers which are not good for me.

    I hope someone can help me

    Thank you

    Hi wacksonjackson,

    Why these RAID drivers are not good for you? Windows XP requires RAID drivers if your laptop is RAID controller and there is no other choice to install XP from a normal Windows XP disc. Then download the RAID drivers on the official website of Toshiba. Either you create a new installation with the RAID drivers disc using nLite freeware tool or you copy the drivers on an external USB FDD and load them during the installation of XP.

    Also check similar topics here in the forum. You will find hundreds of similar topics on SATA and RAID drivers.

    Check this box!

  • Satellite Pro U300: Cannot see the HARD drive during the installation of XP

    Due to the restrictions of the network must downgrade the operating system on a new satellite Pro U300. I am unable to run the XP + sp2 cd as it says there is no hard drive installed on the machine. I guess it's because I need 3 scsi drivers or third-party raid.

    Does anyone have these or know a place where I can get my hands on them? Or am I completely off the mark that you have another solution?

    Hello

    You need the Intel Matrix Storage Management utility for the management of your local storage, including the RAID support.

    On the European driver Toshiba page I found Robson tea for Vista package which includes the Intel Matrix Storage Management utility.

    The same can be downloaded from the Intel page for the XP operating system.

    I found this on the page of Intel:
    http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

    Something similar is described here in this thread.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25749

    Good luck buddy

  • Cannot defragment the hard drive AND cannot start the computer in safe mode

    I have been unable to defragment my hard drive because it tells me that chkdsk /f planned.  I tried manually works in command mode nothing works.  I was advised to try to start up in safe mode, but when I do that all I get is a screen of command lines, and my computer freezes there.  What I'm doing wrong and what I can do differently?

    If you try to defragment a volume and see a message like this:

    Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
    Please run Chkdsk /f.

    This means that the volume (disk) that you want to defragment was marked 'dirty' XP.

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

    You can check the status of your bit of impurity from a command prompt window.

    To do this, click Start, run and enter in the box:

    cmd

    Click OK to open a command prompt window.

    For example, to query the bit of impurity on drive C, type:

    fsutil dirty query C:

    The sample output:
    Volume c is dirty
    Volume C: is dirty

    Is the volume of your sale or it is not dirty?

    The only way to disable the on a volume's dirty bit is to run chkdsk with error correction.

    You can click on start, run and enter in the box:

    Chkdsk /r

    Click OK and answer Yes to schedule the chkdsk next time XP restarts, restart your system and keep your fingers crossed that the chkdsk /r clears the dirty bit (you may need to run once or twice).

    If who disobeys, then you will need to start in the XP Recovery Console and run the chkdsk /r from there.

  • Cannot remove the hard drive from the case

    Acer Aspire AT3-605-UR22

    with the slide in front of the Bay of hard drive enclosure. I have a second hard drive in the traction of front loading Bay. For the life of me I can't figure out how to remove the hd enclosure!

    OMG

    -Shawn


  • Cannot defragment the HARD drive

    Hello. I can't defragment my hard drive. After you have installed the CC29 firmware for my 3 TB Seagate drive that vastly improved read/write speeds, I can't defragment. I checked with seatools and Windows errors nothing no problem. The drive is recognized by windows as it is listed in my computer, but when I go to defrag it does not show on the list. I tried Microsoft support and they just offer to fix it for $ 99, that I could buy a new hard drive for it. Thanks in advance for any response.

    Hello

    Glad to know that the problem was resolved and thank you for the valuable suggestion. Any questions in the future feel free to get back to us and we will be more than happy to help you.

    Thank you.

  • Cannot expand the hard drive of a virtual computer that is a linked clone.

    I have a virtual machine that is a linked another clone.

    I did a lot of development and changes to the linked clone, and now ran out of disk space.

    Now I want to extend the drive, but I get this error:

    "Disks of virtual machines that are linked clones cannot be extended.

    So I then try to extend the drive of the virtual machine that he was cloned from:

    "Disks of VMS with snapshots cannot be extended. You must delete the snapshots or use VMWare vcenter converter. »

    What can I do? If I remove the snapshots of the original machine, do not lose the 'link' to the linked clone? What he suggested that I use the "VMWare vcenter converter" for?

    Does anyone have a solution?

    Kind regards

    James

    Create a complete clone of the virtual machine in the current state. Which can be extended.

Maybe you are looking for

  • MacBook Air storage issues - I have iCloud but using too much data, which is a better solution?

    I have a Macbook Air processor intel and storage 4 GB, I use iCloud for storing all my data, but recently I had a problem with too much use of my data internet home. We are limited because we live in a rural area. So I guess I have two questions: 1)

  • Cannot install programs SyncML in Simulator

    Dear people, I am installing a SyncML (NextHaus and Funambol) client and did not. 1) put the .cod files in the directory programs, which of them should I charge? Each of them? In what order? 2nd) it's even worse: I have one of them installed via web

  • Conversion of CD titles in MP3 format

    How to convert Audio tracks from a CD in MP3 Format sound card please?

  • computer doesn't save the keystrokes, why?

    When you type of mail, strikes suddenly leave registration. Using a wireless keyboard/mouse. Installed the keyboard usb, same result. Windows7 on-screen keyboard works, using now.

  • Presentation Web App notifications

    I would like to than system administrators (or user specific admin) to receive an email notification every time that a user submitted web app element is executed. I don't want to require the approval of the content well. Is it possible to assign a wo