WRTG54S to connect to the network, but not internet

I have a WRTG54S and Mediacom 12mbps. My router worked fine on my old laptop (a Dell Vista), he was sitting in a box for about 6 months and now that I have a new (Sony running 7) I can connect to my network, but not internet. I have updated the firmware of 7.6 to 7.8 without change. I have tried no security, wep and wap without change. Also, I cloned the MAC, once again no change. Windows cannot detect all problems, and when I try to activate the router to connect to the internet it always says connection failed. I can connect directly connected to the modem but not when connected to the router or wireless. Any ideas? Thank you

Problem solved. I had to go to a Motorola SurfBoard 4100 to a 5100. Thanks anyway

Tags: Linksys Routers

Similar Questions

  • Laptop connects to the network, but not Internet.

    I'm trying to fix a HP DV6000 laptop that can't connect to the Internet. It is running Vista Home Edition. It will connect to my LAN cable or wireless network, but not the Internet. I checked a few things and discovered that the TCP/IP protocol is missing. When I try to add using properties of LAN, TCP/IP is not an option.

    I did a complete system restore. System set!

  • can connect to the network but not internet XP

    I use a computer on a local network xp, can connect to the network, ping the DNS server, gateway, etc.  However, I can't not conncet to internet.  When I ping a web address using the address of the site name or xxx.xxx.x.xx I have no success.  Tried to reset winsock, tcp/ip, without success.  Would appreciate any help.

    First course of action:

    1. turn off the PC.

    2. turn off the router.

    3. turn on the router.

    4. turn on the PC.

  • Computer connects to the network, but not to the Internet, connect to the only local

    Hello world

    OK, so I have a HP computer with the installed version of Windows Vista Home Premium 32-bit. I've had it for almost 2 years now and have had no problems connecting to Internet... until now.

    I can connect to networks... both wireless and cable, but I can not get Internet. I used the IP, subnet mask, gateway and server settings DNS to another computer that works with this specific local network just to see what happens... my computer has failed.
    Until recently, I could connect to this WiFi connection in a coffee shop, but the last time I tried it didn't work. I've connected to the network but not the Internet. He told me that the DNS server did not. I'm starting to think that something is wrong with my computer.

    I saw that the solution for some people running the Norton removal tool, however I had uninstalled Norton almost as soon as I got my computer 2 years ago and ran McAfee instead. I don't think that Norton should have an impact on me more.

    Is there a solution to this problem... or I'll just have to try everything that is out there?

    Thanks for your help!

    Hi MomPlaysBass,

    Finally, my problem has been resolved - it wasn't my computer after all. The modem may only be connected to a computer. If you want to connect to another computer, you can connect the computer to the modem and then put it back. My computer worked fine after that. Whenever we want to switch between computers, even if I have to reset the modem.

    I don't think you have the same problem, but just in case, you can try to reset your modem - it's a button on the back or a small hole that you can reach with a pen... Hold the stylus for about 5 sec or maybe a bit more and then let go. That should reset your modem and might help you with your problem. Your computer should also have created a restore point... If all else fails maybe you can try to get back to the final point where your computer worked.

  • 2 13 pro tablet of yoga - to connect to the network, but not the internet

    Hello!

    I got my new yoga today and immediately connect it to wifi...

    It connects to my home but not internet network (or connection very very creepy)

    tried home through my phone LTE and still...

    tried by bluetooth and same result... slow as hell... maybe approx. 10 KB.

    im looking good on the web and don't find anything...

    probobly you are the people with the experience...

    help would be appritiated!

    Kind regards.

    Hey guys quick update!

    After sending the lenovo Tablet and a few screams (sad that we cannot otherwise)

    they replace them with sealed brand new...

    so thanks for the help!

  • My laptop, connect to the network, but not the internet!

    My laptop connects to the network media blank but not internet. My roommates using the network can connect to the internet. I tried various things but not vain. I also tried to get in touch with the Virgin on this subject, but they can help. Is it my laptop and is there something special I need to do with a computer hp laptop. Help, please! Thank you!

    Hello

    On the Start Menu, click programs principally made, click Accessories, right-click on command prompt and select "Run as Administrator".  In the prompt, type the following commands, pressing on enter after each command.  Include spaces in the commands, as indicated.

    ipconfig/flushdns

    nbtstat-r

    nbtstat - RR

    netsh int ip reset c:\resetlog.txt

    netsh winsock reset

    Type exit and press ENTER.  Restart the PC and see if you can log in now.

    Kind regards

    DP - K

  • HP Pavilion 2 x 10-N000NA: HP Pavilion x 2 10-N000NA connects to the network, but not to the internet

    Hello

    I have a problem with my HP Pavilion 2 x 10-N000NA Windows 10, 32-bit version...

    I have a router TP-Link W9980 and the laptop connects to the 2.4 GHz network, but there is no internet access.

    However, if I use a range extender (powerline TP-Link Wireless extender), it connects to the network and the internet!

    So, I guess that the equipment is working well, there must be a setting somewhere?

    I've updated all the drivers, etc. for the laptop and the router.

    Any ideas?  Thank you.

    Hello

    Well, the strangest thing happened!

    There was a huge update of Windows, and it seems to have solved the problem.

    Connections now say '(network) secure' or '(network) open' - which they did not before.

    So now that I know that the network was very good and it was a laptop problem which needed fixing.

    However, I do not know what exactly the update fixed, so I can not pass on any knowledge to solve the problem of someone else who suffer.

  • E-all-in-one printer, HP Photosmart 5520 connected to the network but not detected by computers

    Hello!

    My printer HP 5520 indicates that it is connected to my network, but the wireless printing does not work correctly.

    In the implementation of the process of the driver software the printer displayed after resetting my router, a Huawei HG655d. I get a "no connection" error when I try to send a print job to the printer. Function AirPrint doen and the printer is not visible on the iDevices. I have the latest version of my OS (OS X 10.8.3) installed, I also tried to reset and reinstall my router and my printer several times but nothing works.

    Is there a way to make printing wireless correctly?

    Access my printer directly via its IP address works, so the network connection should work. I've added details of the network below:

    Your router may not support Hello, who need your Mac to find the printer.  Enter the configuration of the router and see if there is a way to activate it.  It is sometimes called mDNS.

    Additionally, make sure that the multicast is enabled.

  • Can connect to the network, but not the internet, a "Local" access only

    Just installed a new router and am now unable to connect to internet on my HP laptop. The laptop is running Windows Vista 64-bit Service pack 1. Pulling him diagnose & repair window returns a message indicating "your modem or router is not available.

    I tried several things to get the internet to connect. I have reinstalled the driver, turned off the firewall, disabled the Internet Version 6 (TCP/IPv6) Protocol and manually configure the network connection.

    I have a desktop computer with a wireless adapater that performs the exact same OS as the laptop and I have no problem with this connection.

    I am able to connect to the internet if I connect the laptop to the ethernet cable. I am completely confused and would appreciate any advice!

    Hi Ima be,

    You can follow the steps below and check if that helps you solve the problem.

    Method 1

    Try to power cycle the router and the computer and check if it helps.

    On the PC:

    1. Save your work and restart the machine.

    On the router or modem (if wireless printing):

    1. Unplug the router and the modem.
    2. Wait 30 seconds.
    3. Plug in the modem and wait for it to come to the ready state.
    4. Plug in the router.

    After you put cycle check the connection between the router and the computer.

    Method 2

    If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
     
    Disable the IP helpdesk:
    1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
    2. scroll down to the IP assistance service, right-click on it and select Properties
    3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
    4. then click on "Stop" to stop the service from running in the current session
    5. click on OK to exit the dialog box

    Method 3

    Disable IPv6 and remove IPv6 virtual cards:
     
    Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
    NOTE: You should do this for each network connection, even if they are disabled.

    Method 4

    Disable the DHCP Broadcast Flag:
    Link: http://support.microsoft.com/default.aspx/kb/928233
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
     
    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
     
    To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:
    1. Click Start, type regedit in the search box, and then click regedit in the list programs.
    2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
    3. Locate and then click the following registry subkey:
    4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
    5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
    6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
    7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
    8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
    9. in the value data box, type 1 and then click OK.
    10. close the registry editor.
     
    By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
    You can also try uninstalling and reinstalling the driver for the wireless card.

    I hope this helps. Let us know the results.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • 12 - client Win10 workstation to connect to the network, but not can not browse - network icon watch

    I have a client host Pro win10 with 12 workstations and Win10.

    The problem is that the customer is made IP on bridged network.

    It is also good gateway and DNS.

    But the browser can't connect to the internet.

    I can search in command prompt.

    Any suggestion.

    I already tried this with the same problems:

    VMware KB: Network Bridge does not work when the loopback adapter is installed on the host

    JensChr

    Hi jpsider

    I helped me to think about this more.

    I found that my firewall and a security program blocked host my client traffic.

    Eventhough he let ping and other things from the command prompt in the client well.

    Jenchr

  • Ethernet cord connected to the network, but not to the internet

    The cord was working fine last night. I closed the laptop and when I turned it back this morning it didn't work anymore. I am not very computer savvy so I'm just asking that when you answer have all steps if your answer is complex.  Thanks in advance for any help.

    Hello

    Thank you for visiting Microsoft Community.

    I understand that you are not able to connect to the internet.

    Sorry to hear about the inconvenience caused. Do not worry, we are here to help.

    1. What is the message you get when you open Internet Explorer?

    2 have you recently made any changes to the computer?

    3. do you have a third-party security program installed on the computer?

    Please follow the suggestion and check them off below if it helps:

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

    Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • IPad connects to the wifi but not internet

    I have a new iPad. It connects without problems to my wifi network at home, but when I try to connect to a network in a coffee shop, it shows that it is connected ok, gets an address IP etc, but when I try to use Safari I get a message that it is not connected to the Internet. This has happened in two branches of McDonald's when I tried to use their network. Once a portal connection captive flashed for a moment, but disappeared before I could connect.

    I tried to forget the network and reconnect, a restart of two buttons, reset the network settings, tried to use Google DNS, but none of them have worked for me. My iPhone works without problem on the same network

    Any suggestions on what I can try?

    Vinnie

    Try using another browser. In my experience, sometimes Safari have problems viewing a page ' agree to our conditions "on the hot spots. I have Atomic but there are others out there. Once you connect, Safari will not let you access the conditions page, use the other browser, which should, so you can use whatever one you want to continue browsing.

  • Connected to the network but no Internet

    I recently networked a former model from Dell and HP new mother, running windows 7.  The dell has XP.  Both computers are hard connected to the router with a connection to a cable modem.  I have the network connection, the Dell but IE and Mozilla, both will not draw a web page.  Two Windows firewalls are disabled and removed Norton Software.  Software AVG has been run on the computer dell with no viruses.  I read that viruses are my problem.  Can anyone help?

    Here is the Vista Forums.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Connected to the network but no internet access?

    I had problem connecting to internet. What is happening is that my computer connects to my wifi network, but then a yellow sign with exclamation sign will appear and it says "no Internet access. I'm tired of checking my browsers and they do not connect. I tried ping and he said something in the sense of "cannot find server". Tried to update the drivers, but either they are up to date, or even can not be updated because it is not connected to the internet. Finally, I tried the system restore, and it worked miraculously! But now, about a few days later, the problem came again and I restored the system again. But I thought I can't do this forever. Is there a way to fix it or at least to know what is the problem?

    Before I restored it, I wrote the changes that making it in my programs and updates that will be removed or modified. They are here:

    Adobe Reader X (10.1.4) MUI 10.1.4
    Microsoft (Bluetooth) 06/21/2006 6.1.7601.17889
    Fix for Package_for_KB2732487 (KB2732487)
    Update of security for Package_for_KB2705219 (KB2705219)
    Update of security for Package_for_KB2712808 (KB2712808)
    Update of security for Package_for_KB2722913 (KB2722913)
    Update of security for Package_for_KB2731847 (KB2731847)
    Update for Package_for_KB2647753 (KB2647753)
    Update for Package_for_KB2729094 (KB2729094)
    Update for Package_for_KB2732500 (KB2732500)

    Adobe Reader X (10.1.3) MUI 10.1.3
    Microsoft (Bluetooth) 06/21/2006 6.1.7601.17607

    Also, I know that this is not a problem with my router or modem because all other devices in my house can access the internet except for mine. I tried to connect my laptop through an ethernet cable, and it still does not work.

    My computer is an Acer Aspire Timeline X 5830TG-6614

    Thanks for the help!

    Hi FinalEclipse,

    Follow the steps below to update your network adapter driver:

    1. If your computer is a Dell, HP, Sony, etc., go to the manufacturer Web site and download the driver for your network card, specific to your computer model and save the file to your desktop so that it is easy to locate.
    2. On your computer, click Start
    3. Right click on computer then Properties
    4. Select Device Manager
    5. Expand the network adapters
    6. Right-click on your network map, and then select Update driver software
    7. Select Browse my computer for driver software
    8. Click Browse
    9. Select desktop
    10. Select the driver that you saved in step 1.
    11. Click Next and follow the remaining instructions.

    Let us know if that helps.

  • Microsoft Office 2007 (Word, Excel, Outlook) slow when connected to the network, but fast when not. with windwos vista

    Microsoft Office (Word, Excel, Outlook) and printer slow when connected to the network, but quickly when not. with windwos vista, I have reintall the operating system, but still the same. Environment Network (Win server)

    Hello

    Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Windows Vista IT Pro Technet Forums network.

    http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro/

    I hope this helps.

Maybe you are looking for

  • Photosmart HP 7520 - surface tablet paper tray selection

    Photosmart HP 7520 - paper tray selection I can't print photos because your surface said the photo tray is not installed, it pulls the paper in the main print tray!

  • M712 repetitive image problem. Can not find the page for service with the official RULE

    I have to review the manuals online here and I googled for them as well. Nobody seems to have an official repetitive image for the M712 default rule page. My impressions can repeat the points that occur each 1.75 "or 44 mm. Looking at an older manual

  • DAQmx - create channels to channel-not found

    Hello I'm new to labview. So maybe my question is simple... I want to generate a signal. That's why I use the DAQmx-create channel.vi. I have, I've created a control to selected the channel, where the signal is generated. But no channels are found. I

  • PRINT BIGGER

    When printing some pages on the internet, the type is very small and difficult to read. How can I set the printer to print bigger characters?

  • AHHH! What is this mouse!

    There is a mouse I like really (comes with the 'Dell XPS 8300'), but unfortunately, I don't know what is the name of the mouse! So, what this mouse? And where I can buy this mouse (as the mouse)?