WRTP54G router: I have wireless internet access, but is not a wired desktop computer.

We have a great wireless network in the home, but my office (which is not wireless) is unable to access the internet.  It is said that a network cable is unplugged - it isn't.  When a cable is plugged into one of the 4 ports on the back of the router ethernet, ethernet LEDs located on the front doesn't light up or blink or anything.  I think that the part does not work.  Is there something I can do?  Should I update the firmware?  Or just get a new router?  I tried different cables, but nothing changes.  The only way for the office get online is to take the router configuration, but then the wireless network and the Vonage phone came out.

I went to ipconfig at the prompt of commands and under the Ethernet connection to the Local network card: my media is media disconnected.  So, I'm guessing that the router's ethernet ports do not work.

Thanks for your help.

Make the continuos ping ping 192.168.1.1 t and check how many answers or RTO you will. If you still have some of the answers, connect your PC to the modem to get internet connection and download the latest firmware and utility upgrade for your router.

FIRMWARE

1. go to www.linksys.com/downloads

2. Enter the model number of your router

3. choose Get downloads

4. Select the Version of the device

5. check drivers and downloads, can download the Firmware

UPGRADE UTILITY

1. go to www.linksys.com/downloads

2. Enter the model is BEFSR41

3. choose Get downloads

4. Select the Version of the device - Version 4.0

5. check drivers and downloads, can download the utility

After downloading these files.

Connect your PC to the router, and then run the TFTP (Utlity) set Server = 192.168.1.1; Password = admin; then choose the firmware file that you downloaded. Then upgrade the firmware of your router.

Note: Make sure that you set TCP/IP and DNS server you computer back to GET the IP ADDRESS.

Note: To run the utility TFTP set TCP/IP and DNS server on your computer to USE THE FOLLOWING IP ADDREESS.

Just follow the previous posts to do this. Good luck.

Tags: Linksys Routers

Similar Questions

  • After the death of firewall router in an outtage power yesterday I replaced my router have restored internet access, but none of my corporate office offices can access our network printer/scanner.

    yerterday morning, that we had a power outage at my place of business. When power has been restored we can't access internet from any one of our desktop computers. After working with a material MFG co troubleshotter. our firewall router NETGEAR, it has been determined that the equipment was defective. They offered to replace the camera for only the shipping charges, I felt an acceptable solution. Then I was told that with bureaucracy, it would take two weeks to get the new unit. Well, my choice was then to set for two weeks and slowly go out of business or buying a new router. I have relpaced the unit with another mod. Netgear router and this quickly got back up again, at least if we could access our system of internal accounting and the internet. My problem is as it is now that I can't access our office network printer.scanner (kyoceraMita) of any one of my desktops. At this point, I'd appreciate any help. I own my business, but am not a computer guy of any measurment known to man. I have this idea, maybe it's a simple software for all fit everyone access to what they need, but I don't know what it is maybe. If sufficient information, in my view, that I could probably fix the problem myself without providing any benefits of outdoor programming.

    The problem now is that the router has changed, the addresses IP, subnet mask, default gateway address, network security wireless network wireless security password and other settings no longer correspond to the original router.  As you said that the SCP can all see each other, you need to see Kyocera and network user's guide 'unit' in order to find the IP address, subnet mask and other network setting the configuration parameters 'method '.

  • Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

    Original title: connection problem

    Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

    Hello

    Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

    I suggest you to consult the steps described in the article:

    Method 1:

    You can try the steps in the link and check.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    You can update the driver of windows 7 on the manufacturer's Web site.

    Method 2:


    You can remove and re-create the wireless network connection, follow these steps:

    a. Click Start, type ncpa.cpl , and then press on Enter.
    b. right click on your wireless network connection and then click Properties.
    c. click the wireless networks tab.
    d. under preferred networks, click your Wireless
    network and then click on remove. e. click on view Wireless networks.
    f. under management of the network, click refresh the network list.
    g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.

    Method 3:
     

    If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

    a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

    b. right click on network adapters and click Uninstall and restart the computer.

    c. after rebooting, install network cards and check with the question.


    Method 4:

    You can temporarily disable the antivirus and firewall on the computer and see if it helps:
    Enable or disable Windows Firewall
    NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
    You can see the following link to disable the Antivirus installed on your computer software.
     
    NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

    Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.
  • In order to become a distributor of volume Adobe Reader, (my computers have no internet access), I need to fill out the Distribution of Volume License Agreement, but will not accept an answer I gave to the question: "Please indicate the product or service

    In order to become a distributor of volume Adobe Reader, (my computers have no internet access), I need to fill out the Distribution of Volume License Agreement, but will not accept an answer I gave to the question: "Please indicate the product or service name and description.

    This form must be completed and submitted online. Also the browser Javascript must be activated.

    https://distribute.Adobe.com/mmForm/index.cfm?name=distribution_form&PV=RDR

  • After the abduction of a trojan virus, I still have no internet access

    After the abduction of a trojan virus, I still have no internet access with Internet explorer, Google Earth, or Yahoo Messenger. Attempt to update Yahoo Messenger from a download of update, a message indicates "Yahoo Messenger is unable to download files needed for installation. Please check the firewall settings and try again. It does not matter whether or not the firewall is disabled. Yahoo Messenger is able to connect, but not to show me the list of the rooms in the right panel. Firefox still works fine and all I use.

    Here are a few things to check after an infection or elimination:

    We will check your network connection properties.

    Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.

    Click Start, run and enter in the box:

    Inetcpl.cpl

    Click OK to launch the Internet Properties Control Panel, choose connections, LANsettings.

    Or, in Internet Explorer click on tools, Options, connections, LAN settings.

    These settings control your Internet access for all browsers.

    (If you make settings, write them down so you can undo changes if you must)

    On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

    Automatically detect the setting checked =
    Use the automatic configuration script = unchecked
    Use a proxy server for your LAN = not checked

    Make changes, then click OK, OK to save the settings.

    Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

    If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

    Click Start, settings, Control Panel, network connections, and then select your current network connection.

    On the general tab, click Properties.

    In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

    In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

    Obtain an IP address automatically
    Get a DNS server address automatically

    The rest of the options on the screen should then be grayed out/not available.

    Make changes, then click OK, OK to save the settings.

    Restart your computer and test your connection.

    If it still does not work, check your settings are still in place after a restart and then release and renewal IP of your network device configuration settings.

    Click Start, run and enter in the box:

    cmd

    Click OK to open a command prompt window, and then type the following commands:

    ipconfig/release

    ipconfig / renew

    output

    Restart your computer and test your connection.

    Download, install, update and do a full scan with these free malware detection programs can solve any problems:

    Malwarebytes (MMFA): http://malwarebytes.org/

    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    It can be uninstalled later if you wish.

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • Hi, I have wireless internet in my house and I gave my password system so that others in my home with laptops can use my provider internet-how can I change my password now?

    original title: Hi, I have wireless internet in my house and I gave my password system so that others in my home with laptops can use my internet provider. I want to change my password now. How can I do this or do I need to contact my provider to do this? __

    Hi, I have wireless internet in my house and I gave my password system so that others in my home with laptops can use my internet provider.  I want to change my password now.  How can I do that or do I need to contact my provider?

    Normally, you must have set a wireless router with a password to the wireless network using the wireless network that you have set up in your home.

    If above is the case, read the information that came with your router, or search for it on their website on how to change the settings in it.

    See you soon.

    Mick Murphy - Microsoft partner

  • My network connection shows no internet access, but I can access the internet

    Hardware: Dell XPS 8300

    OS: Windows 7 family

    System type: 64-Bit
    In the network and sharing Center, it is show the connection between the network of Multi and the Internet has an 'X', but I have full internet access.
    Is there a way to fix this?

    Hello

    I understand that you are able to connect to the internet when your computer showing no network connection.

    1. did you of recent changes to the computer?

    I would suggest trying the following instructions and check if it helps.

    Method 1: update the network driver.

    Steps to update of network driver:

    1. click on the Start button.
    2. in the search box type devmgmt.msc, and then press ENTER.
    3. Select the network card device and right click on it
    4. now, select Properties.
    5. in the Properties window, on the driver tab, click Update driver.
    6. After installing the updates, restart the computer.

    For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

    Method 2:

    Temporarily disable the Antivirus and firewall

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Windows 7 connects and says "Internet access", but cannot access the internet!

    Hello, please help me with this annoying problem in answering it.

    My PC connects successfully to the mobile hotspot and indicates that he gined Internet access, but when I try to browse the internet (I tried Google Chrome, Internet Explorer, and Mozilla Firefox), or use any application that needs to connect to the internet (such as online games) HE DO FACT NOT WORKING, or SAY "NOT CONNECTED to the INTERNET.

    In the time that each connected device another works perfectly.

    Please when you view this thread the RESPONSE and not SIMPLY LEAVE.

    Thank you to everyone who helps me.

    Thank you to everyone who helped or tried to help me. It if a virus blocking internet access to applications. I now come back to my PC back working.

  • I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500

    I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500.

    Hi Mark,

    Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have problems setting up a homegroup with Windows 7 computer. Please correct me that I misunderstood.


    Mark, please don't worry I'll try my best to resolve the issue.

    I suggest to go through the following websites, which provide a detailed description on the homegroup and how to set up.

    Home Sweet homegroup

    http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

    Homegroup from start to finish

    http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

    If you're still having trouble to set up the residential group, please let us know. We will be happy to help you.

  • I can not connect because of acrobat, it says that I don't have an internet connection. but I have! I can't use acrobat!

    I can not connect because of acrobat, it says that I don't have an internet connection. but I have! I can't use acrobat!

    I removed it, clean all Adobe cleaner, install and I can't use it!

    Check your hosts file.  to get help who and other common connection problems, sign activation, or connection errors. CS5.5 and later, Acrobat DC

  • Elements says that I have no Internet connection, but I do!

    Hi im on windows 8, iv bought photoshop elements 11 card.

    put in the code, got download. settle and he says I have no internet connection, but I don't.

    can anyone help please

    Thanks jeremy

    http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • Unable to connect mifi 4510 hotspot for PC. Wireless see peripheral but does not connect... is to expire.

    mifi4510L

    Unable to connect mifi 4510 hotspot for PC. Meet operational requirements throughout the system. Using XP SP3. Wireless see peripheral but does not connect... is to expire. No msg error in Event Viewer.

    THX

    Hello

    I suggest you to try the steps below and check if it helps.

    Method 1: Try running the Fixit tool from the link below.

    Hardware devices do not work or are not detected in Windows:
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 2: Try also to update the latest drivers for your device wireless using the link below.

    How to manage devices in Windows XP:

    http://support.Microsoft.com/kb/283658

    Hope this information is useful.

  • I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me

    I have a Dell Inspiron with windows XP and I can not start.  I have the windows disc but do not know how to clean and reinstall.   Please help me

    You can repair XP or try the following:
    http://support.Microsoft.com/kb/917964
    http://support.Microsoft.com/kb/307545

    TO

    Re - install http://support.microsoft.com/kb/978788

  • I'm trying to install internet security but do not remember my user password so I can't continue please help

    I'm trying to install internet security but do not remember my user password so I can't continue please help

    Hello Diane Challender,.

    Thank you for your message.  Unfortunately, the technical support engineers Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.  For more information about this policy, please see the sticky below:

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • I have a subscription (InDesign), but can not use it

    I have a subscription (InDesign), but can not use it

    Hello

    Please we write the error message so that we can help you. However, if you get error then follow it please stop Creative Cloud 2015 to return to the mode of trial and problem with Photoshop CC license to rename the hosts file if necessary.

    It will be useful.

    Kind regards

    Shelly

Maybe you are looking for