WSD Print device device driver prevents computer from going into standby mode

Similar Questions

• WSD print device driver works is not windows 7

  As with many other posts, I'm wsd print device driver error message.  Can see the printer installed, but used to install this driver wsd.  I went to Device Manager to try to uninstall and the uninstall option does not appear.

  Has anyone successfully gotten rid of this error message?

  Windows 7

  HP Officejet Pro 8600

  Thank you

  Thank you.

  I had to go to the hp website and download the drivers. Apparently, my 'new' desktop came not with the necessary updates drivers.

  Everything works now!

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• WSD Print device driver error prevents the standby machine

  Hi all.  I've been struggling with this problem for a few months, without success.  On my system: Dell PC, Vista 32, SP2, using a Brother MFC 490 all-in-one that is connected to my wireless network.

  My problem is the following: a few months ago I noticed that the Bureau has refused to go to sleep, instead showing a popup that says, "the device driver for the WSD print device prevents the standby machine."  It's embarrassing at the very least, a waste of money and the system of life at worst.

  I tried the following without success: restored the system to a point before the show, updated the wsd, uninstalled/reinstalled the wsd driver driver & peripheral, uninstalled the Brother software (the printer has remained on the system, thanks to the auto detection) and banged my head with great enthusiasm on the keyboard.

  If all goes well, there is a relatively easy fix!  Thanks for your suggestions...

  Hello DFontanella,

  The error message indicates that there is a problem with the driver and preventing the computer to go to sleep.

  I suggest you uninstall the drivers for the device. Disconnect the connected device and try to load the generic drivers of the printer in the back.

  Also try to restore the driver from Device Manager:

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  1. open Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  2 right-click the device for which the previous version of the driver is desired and then click Properties.

  3. click on the tab drivers.

  4. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• My printer interrupts communication with my PC when the P.C. goes into Standby Mode. Why?

  Until yesterday, the printer worked fine.  There is no cable or hardware change any.  I am running Windows XP with a jet of Lexmark color printer.

  When I restart the printer works fine.  However when the order goes into standby or hibernation mode, I can print is no longer when the box comes back active.  I get a message that "there is a communication error with the printer.  To correct this problem, a box appears I should go to start/settings/printer and make sure the "Enable bidirectional support" box is checked.  Unfortunately, I can't access the settings of the printer directly from the start menu.

  However, if I click on 'Options' that is displayed when the printer stops and I click "Troubleshooting", I don't see that the "enable bidirectional printer media" is more verified.  If I check, I get a message saying "printer is busy".  If I click on start again I get the same message and the "enable" box is unchecked.  If I hit Cancel, the box is also disabled.  I enter a loop that does not end.

  Any ideas how I can access the printer directly from the start menu settings?  Or how to prevent the impression of no longer communicate with my PC when it goes into sleep mode?

  Thank you much, long in advance for any suggestions you may have.

  It is a Lexmark Z-52.  After 8 hours of trying many different, including the link ideas that you suggested, I have determined that as a result of some recent Microsoft Download, the printer would work only if I used the Dell printing device incorporated in the installation software.  If I tried to install the Lexmark printer from the installation disc, I got the persistent problem.  I deleted all but access to the printer through the installed also origin and everything of fine.

  When I need to change the cartridges and align the jets, I install the Lexmark program, align the print cartridges and then remove the program Lexmark, using the default value of Dell for the printer remaining.

  It works, but why I had a problem, I don't know.

  TNX for the comments!

  Big Phil1

• want to 5530: error: is not installed driver for WSD print device

  I'm trying to install the software on the HP Envy 5530 contect to my Dell Windows 7 Home Enterprise laptop runing.  I have installed and uninstalled. use the web and the installation disk but when I check the printer it shows a warning triangle with an exclamation point (!), which tells me he needs in case of a problem.  I get the error "WSD print device driver is not installed.  Please help me.

  I think I tried your 3 bullets without result.  I tried to print wireless HP Center regions, but I'll start over and focus my efforts in this area by the top.

  Seems not a problem of the printer "not found".  The printer Hp Envy 5530 is listed. but shows an icon indicating the troubleshooting is required.  See this link from dropbox http://1drv.ms/1zODxEY

  Having said that, however, when I try to print your word document, I got a message "no printer installed": http://1drv.ms/1AgOqEE

  Bottom line, it is not resolved yet.  Dang it.

  Thanks for your help.  I persevere and hope to get it resolved.  I will answer when I do.

• WSD Print device is not installed driver

  I try to print on my Brother MFC 9970 and when I trouble shoot, I get a "WSD print device driver not installed. Well, I know that, because I've uninstalled it after several times trying to update due to the previous error it not updated. Now, I have no idea how do to download the driver and cannot find a driver to download to a Microsoft website that actually works. Help, please?

  Hello

  This happens for your model of printer you have given us: MFC-9970CDW NO result found at Brother for MFC 9970.

  Go to the website of brothers.

  Uninstall/reinstall your printer using the latest drivers from here your operating system.

  http://support.brother.com/g/b/downloadtop.aspx?c=us_ot&lang=en&prod=mfc9970cdw_all

  Most of the manufacturer will also have troubleshooting steps for you to take registered there, too.

  This can also help you:

  "Solve printer problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  "Solve printer problems.

  In the upper right corner, select your operating system from the menu drop-down.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• Computer always goes into mode 'sleep' even if I chose to never sleep

  Original title: the power settings

  When I go into power settings and put the computer to sleep, I choose NEVER.  The reason why I have some backups that take a long time.  However my computer always goes into the mode after a certain time. I've been through this several times.  How can I fix it? Thank you

  Hello

  Make sure that you are logged as an ADMINISTRATOR to make changes to the power (sleep) or others.

  Are you sure that you have those established in all Power Options? (There may be more than one).

  Check the change Plan settings - change advanced power settings

  Check the change when the computer sleeps

  Is - that go to sleep or is the active screen saver?

  Right click on the Desktop - Customize - screen saver.

  ==================================

  These might help:

  Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
  http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htm

  How to solve a problem of Standby Mode Vista and find a Solution - also applies to Windows 7
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Sometimes reset power Plans to default values help and then put them as needed.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to manage Hibernate Mode in Windows 7
  http://www.howtogeek.com/HOWTO/7564/how-to-manage-Hibernate-mode-in-Windows-7/

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  How to restore the default settings of the power Plan in Windows 7
  http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html

  How to change the power Plan settings in Windows 7
  http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• WSD Print device does not have a driver

  Help!  I have a new Pavilion of HP with Windows 7 Professional 64-bit Edition.  I'm trying to install a HP Officejet 4500 printer via a wireless router.  The computer detects the printer, but then gives me the error under Troubleshooting in devices and printers that the WSD print device does not pilot and therefore will not be installed.  There are other the home computers running Windows 7 that are able to connect and print.  Unfortunately, my son lost the printer installation cd so I downloaded the drivers on the internet and still get the above message. I tried even to connect the printer directly to the laptop and the laptop does not show even a usb connection.  I have completely restarted (with assistance from HP Support) the new operating system for laptop to factory settings and still am exp eriencing the same problems.

  Can I go to a friends house and the laptop will detect and install this printer with absolutely no problem... What should I do?

  Hello leo.choo,

  These are the drivers that are available for the HP OfficeJet 4500 printer.

  I see that there are two models of printers. I don't know which version you have printer HP Officejet 4500 G510g all-in-one or the 4500 G510n all-in-one HP Officejet printer. There are separate drivers for every model.

  I suggest you follow the link below, enter your model number to download the drivers for Officejet 4500 Wireless printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3986399

  You can follow the link below to run, download and run the utility:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114788&cc=us&LC=en&DLC=en&product=3986399&tmp_track_link=ot_search

  Or alternatively, you can download the drivers for the Windows 7 computer that works on another computer and use a thumb driver to copy on their computer and install it.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Help! WSD Print device does not have a driver

  Help, please! I have a Dell Inspiron N7110 with Windows 7 Home prem oa that I try to install an epson stylus nx420 printer via a wireless router.  The computer detects the printer, but then gives me the error under Troubleshooting in devices and printers that the WSD print device does not pilot and therefore will not be installed.  .  Unfortunately, my mother lost the printer installation cd so I downloaded the drivers on the internet and still get the above message. I tried even to connect the printer directly to the laptop and the laptop does not show even a usb connection.  I completely rebooted (with assistance from HP Support) the new operating system for laptop to factory settings and still exp the same problems... What should I do?

  Hey Elena,

  Until we provide troubleshooting steps, we would like to know as a result of information from you.

  (1) what is the exact full error message you get when installing the unit?

  (2) have you installed the driver from the manufacturer's website?

  (3) your computer is capable of detecting other connected USB devices?

  You might face this question when the driver installed is not original or if it is not installed correctly. Follow the troubleshooting methods listed below to solve the problem.

  Method 1: Install the printer drivers from the link below, then check the issue. Select the appropriate operating system.

  All-in-one printer, Epson Stylus NX420

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=151211&prodoid=63087959&infoType=downloads&platform=all

  Method 2: Follow the steps in the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link given below for assistance.

  Share a printer

  http://Windows.Microsoft.com/en-in/Windows7/share-a-printer

  Feel free to write us if you are still experiencing a problem. We will help you to come.

• somehow I have scratched my order of device driver / & audio volume from my hard drive and now I have no sound. What have I done?

  somehow I have scratched my order of device driver / & audio volume from my hard drive and now I have no sound. What have I done?

  Fujitsu lifebook

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the exact model of your computer?

  2. what exactly happens when you try to play sounds on the computer?

  If you are not able to hear sound on the computer, then I suggest you to try the steps mentioned in the link and check if this may help.

  No sound in Windows: http://windows.microsoft.com/en-US/windows/no-sound-help#no-sound=windows-xp&v1h=win8tab2&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Select the appropriate model and try to install the sound drivers from here: http://www.fujitsu-pc-asia.com/driversupport/selectioninterface/selection.html

  Please follow these recommended steps and post if you still experience the problem.

• What printer goes into sleep mode computer stops

  just got a hp7520 as a gift. updated from xp to 7. If the printer goes into sleep mode, the computer shuts down.  currently I'm keeping the printer in demo mode so that it does not expire.  Anyone know how I can use printer without him turning off the computer in normal mode?  I talked about Noone has even heard of that happening.  I hope someone can help. Thank you!

  Hi @JNBLanocha

  My stomach says mt that perhaps you have the printer USB cable connected to a USB 3.0 port on your computer instead of a 2.0 port. The image below is some examples of 3.0 ports.

  

  3.0 ports are supposed to be backwards compatible, but I've seen questions arise.

  I wonder if the cable you are using is the computer and causing problems pulling power. All I can do at this stage is to assume and to gather information. Please post back with the answers to the following questions;

  1. You have a USB connection
  2. If the USB is connected, you use a 2.0 port or 3.0?
  3. Again, if you use a USB connection type, have you tried another USB cable? It could be a cable problem.
  4. You put XP or you remove XP and install Windows 7?
  5. You have your printer connected directly to a power outlet, or you are using a power strip/bar, or a surge protector?
  6. Now this may sound silly, but you have a timer on your computer, such as the hibernate after so many minutes and maybe the computer and the printer are set at the same, it is possible the moment closures / sleep coincide.

  I look forward to hear from you and to work towards a solution.

• What would happen if the computer goes into hibernation mode, but there is no free space on hard drive?

  What would happen if the computer goes into hibernation mode, but there is no free space on hard drive?

  No doubt a failure to the hibernation or a nasty system crash - not sure and not willing to risk a stable system there.  :-)

• Continue to application play when the device goes into sleep mode

  Hey guys,.

  wondering if anyone knows how to maintain an active application when the unit goes into fashion watches?

  My application needs continue to work when the device goes into sleep mode if he went in that State by itself, or if the user put it to sleep.

  Yes I tried it on a physical device. It works, I promise you

  To clarify, here is what you will see when using KEEP_AWAKE:

  1 device shall not sleep when the application is currently active

  2. the device shall not sleep if the application is reduced, and you are in mode carousel

  3 device WILL sleep if the user switches to another application and full screen.

  In addition, another thing to know, if the unit is not assigned to the showcase mode, which is not by default, the audio stops when the user leaves your app. This is not related to sleep and is totally out of our control, but could be a good thing to add to your product details.

• My printer 3050 J610 goes in standby mode or sleep, and then I can't print docs it wireless

  Whenever I have don't print something for a few hours, my printer goes into sleep mode or sleep.  When it does, it can be used to print from my laptop or android for it.  Y at - it a way to put in place so that it doesn't "go to sleep", and it is always available for me to print with.  I like the printer, but it seems few off that you can't print on it wireless and it is considered as a wireless printer.  That's the only reason why I bought it and now I can't even use it without stepping down and turning the printer back again.  If I wanted to do this every time I was going to just print from my main computer!

  Thank you

  Ashley

  Well, I activated the incoming and outgoing settings under sharing files and printers in the firewall. I've also set up a connection between the router and the printer security rule. Since then, I was able to ping the router and the router by its IP number regularly for more than 72 hours. I hope that this solves the problem and everyone helps the dilemma.

  Mike