WSN module

Similar Questions

• WSN-3212 or NI WSN 3202 when loaded with VI target with

  WSN-3212 or NI WSN 3202 when loaded with a new firmware using option "Add LABView WSN target", cannot re connect with the gateway ethernet OR WSN - 9791. In MAX, the quality of the link state is "lost Signal".

  Basically, I tried to change the sampling in the sample interval ""case structure, then built the VI and deployed on two WSN nodes. " They show the status of the download of the firmware and the LABView also shows the message 'successfully deployed", but then, knots just to start scanning and never connect again.

  Please help in this regard.

  Hello binarystar105,

  When you have downloaded the new firmware, did you follow the steps described in this article?

  How to upgrade the Firmware on my NI WSN gateway?

  http://digital.NI.com/public.nsf/allkb/CF6241F5F849FC7086257909008327C5?OpenDocument

  Also, what version of firmware you currently have?

  What version of the LabVIEW WSN Module work?

  If you look at the properties of the node of your window from the LabVIEW Project Explorer, can set you the tab node sampling interval?

  You may already familiar with this material, but I found the following white paper to be extremely useful when I started working with WSN:

  Getting started with wireless sensor networks of NOR

  http://www.NI.com/white-paper/8890/en/

• The connection failure module 9795 with wsn-3226 with Labview 2012

  Good afternoon

  I have a Crio-9074, with a 9795 module and two modules WSN-3226 and I have updated my Labview to the latest version, version 2012 and me cannot communicate with WSN nodes. The program says that the nodes cannot connect with the gateway. The software I have installed is:

  -Labview 2012

  NOR-Rio 12.0

  NOR-WSN 1.4

  -OR-Real-Time Module 2012

  I checked CRio don't let install WSN host API 1.4.0 because it is not installed in my host. Can someone tell me where I can download it, and if this is the reason why I can't communicate with nodes?

  Thank you for your time

  Hello

  I have

  LaurentV wrote:

  Hello

  Make your cRIO and all modules appear in MAX?

  Could you give more details about the problem, such as a screenshot of instructions on how to reproduce the problem, and you get the error message?

  ---

  Lawrence V.

  Engineering Application OR (France)

  correction of the error, by reinstalling Labview 2012. Thank you very much for your attention.

• 36 wsn-3202

  Hello, dear OR engineers!

  There is a task to build net wsn with 36 x 3202 modules on a COMPACT territory and 9791gtw ~ 70x70meters, is it possible?
  (All documents are read, please visit)

  Problem is that all modules can 'see' radio signal each other in the small territory while it produces interferences and there is no possibility of separate wsn-routers.
  All modules are distributed on a square regular. WSN-9791 is one side of the square on a height of 8 m.

  Someone at-ideas? Or maybe sombody can convince me that such system is incorrect? Plan in attachments.
  Thanks for any help!

  
  

• WSN-9791 gateway crashes

  Hello, dear OR engineers!

  There is a problem with WSN-9791.

  There hangs after a month of work.

  WSN driver/firmware 1.1.0f3.

  In the MAX is not displayed any module. Work has been pursued only after restarting WSN-9791 to MAX.

  Now I'm about to update driver for version 1.2. Anyone know can help to resolve the situation?

  Hi Kolan,

  The update to version 1.2 of WSN is certainly recommended. because it fixes bugs and improves performance.

  WSN 1.2 update

  First update the Firmware of the bridge, then each node as well.

  A problem with the bridge would probably have an impact so nodes to see if the problem persists after the update of the firmware.

  All the best,

• WSN MAX, J-type thermocouple and serach time node issues

  Hi dear all,

  I use the WSN starter kit, I am able to work well on it, but have some problems and you smart guys do look in those.

  1. once I installed 1.2 WSN software module poineer, I am unable to see Remote System tab in the tree of MAX, only my system tab is displayed. Even if I am able to see in my lvproject, to develop and use the application successfully.

  2. the J type thermocouple which came once I set TC0 + and TC - of the WSN - 212 node according to documentations, then in Labview VI, I see in the temperature value 273.56 ambiguous as - values and change them to-244.67 as once that I touch at its end. My node is set by default to the range of temp type J and Celcius, click right property tab.

  3 How long the knots will search gateway once its out of the range of gateway or I power off of the entry door? I experienced his seraches led for about 1 min then sleeps for 1 min at the start and then sleep time increases. I did this for 3-4 hours but after that 7-8 hours I couldn't see any LED flash for the search of the entry door. I needed to push button on the node, and then I start seraching.

  Kindly help me on these issues. More will come once I have will probe deeper into the system.

  Thank you & best regards

  Zdzislaw qureshi

  + 923005178180

  
  

• Code of State WSN

  Engineers in the morning,
  I try to implement a program where apeear this node status, in other words, I want to see if this node is connected or not.
  Up to now still can't build code that did it. I don't have the installed Module WSN Pioneer, this need for create this code module.
  Kind regards.

  Hello Hugo.

  Here's a way to do it: KB

  Concerning

• Server 5.2 php pgsql.so module does not

  After installation of macOS Sierra and Server 5.2, I find that Roundcube is no longer able to connect to a PostgreSQL database. I back down to the file php.ini configuration does not load the pdo_pgsql.so/pgsql.so modules. All the world has noticed this change?

  I see that the server still has its own php.ini file with extension to pgsql inside settings. However, the configuration of php is more load the server php.ini file, because it seems before. How could I do php load in the server's PHP.ini?

  I have this problem as well!

  It is very bad, I have a few site that using pgsql and they are now down until I'm looking for the solution!

• My modules do not work all of a sudden with firefox 43.0.1

  This morning, they worked; This afternoon they do not. the error message indicates that they can be verified. should each module be developed by its owner? What a mess! I use windows 7 and firefox 43.0.1.

  Firefox now automatically disabled addons unsigned for the safety of the user.

  Please visit these sections of Mozilla for more information on addons unsigned and how allowed them:

  • Module signature in Firefox
  • Decoupling of the comments since the signing of unlisted modules

  Warning: The steps above may present a security risk. Please use with caution and at your own risk.

  Please consider notifying the proponent of the addon on the issue, so that they can get their addon signed as soon as possible.

• control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.

  control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.

  This will be only stifle creativity and prevent new addons are made.

  Said heavyoak

  control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.

  This will be only stifle creativity and prevent new addons are made.

  How is that what does strike you?
  https://blog.Mozilla.org/addons/2015/08/21/the-future-of-developing-Firefox-Add-ons/

  «We are implementing a new extension API, called WebExtensions...» »

  The infrastructure of the current extensions will be gone and with it will have the advantage of current extensibility that Firefox had more Chrome and Opera. Kinda like the rating "fascism" for "communism".

  So at the end of next year we can be moaning about something much bigger than the current "signature" minor schism or "bump in the road."

• cannot activate or reinstall the security module of Avira (unsigned) browser to v43.0 FF

  Firefox has automatically (and without asking) disabled the browser security add-on Avira after my upgrade to v43.0. He refuses to allow me to re - activate. I then uninstalled and tried to re - install, but which is too rejected him - regardless if I have the xpinstall.signatures.required flag set to true or false.

  Is there another way I can get this add-on re-installed, or Firefox can simply no longer modules unsigned from v43.0? (If this is the case, it's unjustified behavior and too paternalistic, in my opinion, the user should have the last word on what can or cannot be added on.)

  I give it a try and I can see the issue.

  For security reasons, you are unable to install the extensions unsigned from any Web site. Instead, you will need to do the following:

  1. Go to the website of browser Avira Security
  2. Make a right click the Add to Firefox button
  3. Click Save Link As... "to save the XPI file to your hard drive
     
  4. Go to the Firefox addons Manager
  5. Click on the gear
  6. Select install the addon file
  7. Open the downloaded XPI file

  This should install the addon it correctly.
  Sorry if it is difficult or impractical.

  Note: You may need to restart Firefox for the addon to be installed correctly.

• How to move icons of the add-on at the helm the additional module at the bottom of the screen

  I have a number of modules, and the icons on some of them take a lot of space. So the navigation bar is stuffed full. I added the bar add-on that appears at the bottom of the screen. However, I did not understand how to get the icons module moved to the bar downstairs. I'm sure it's something very simple, but I did find the magic combination to do it again.

  I would appreciate any help/suggestions you can give me. Thanks for your help.

  I don't know if it's relevant, but I use two laptops computers Toshiba running Windows 7 and the other is Windows 10. Both are 64-bit. And it is Firefox 42.0.

  Type of topic: customization< enter > in the address bar.
  In the new window, look for the icon. When you find it, press and hold
  the left button on it and move it to where you want it to be.
  You can move the icons you want here, but
  some icons are locked in place.

  Also, there is a default button in the Middle at the bottom.

• Establishment of Firefox urging 42.0 refreshed and now my 2 - Fav went modules! Is reversal Possible to undo changes?

  In moments, Firefox "Refresh" made a mess of my selections, custom modules, plugins, toolbars, etc and now fails, 2 - my favorite "go - to" Add - ons are (1) went 1 and (2) the other will not be installed. I would NEVER suggest that Firefox again. I was doing pretty well... Except for several months, Firefox crashes suddenly, and I have to go in to effect Firefox Task Manager, then open Firefox anew. All I can say is, I have to lose my marbles to 'Refresh' Firefox for the second time in a few years, after the first sentence of time due, and the overall results are worse now, the second time. I'm also tired of Firefox crashes.

  Anyway, is the "refresh" which took place in the last hour, reversible? Also, just noticed "old Firefox Data folder ' then he'd ever seen before... is - it related to Firefox refreshing?

  Help?

  Yes, an update moves the entire record of the settings in the folder of old data from Firefox, then Firefox creates a new folder of parameters with selected data in your old folder, not to mention most of the preferences or your extensions.

  You can use the contents of the Old Firefox Data folder to "roll back" the refresh, but this involves several steps. It takes 5 minutes, but it's perhaps faster than the recovery of individual files and load those into your new profile.

  Check in the folder 'Old data Firefox' update adds a folder with a random semi name on your desktop. If there is only one, that probably has your old settings and Add-ons. If there is more than one, you'll want to work with one who has been updated recently.

  Once you have identified the profile folder, that you want to restore, here is my "old profile resurrection suggested procedure:

  Overview

  Here are the steps described in more detail below:

  1. Create a new Firefox profile
  2. Delete all of this profile folder
  3. Copy in all of the old profile folder

  Create a new profile for Firefox (Windows)

  Exit Firefox completely and start up in the Profile Manager by pasting the following in the Windows search, or the Run dialog box by pressing ENTER:

  firefox.exe -P
  

  Note: any time want to switch profiles, exit Firefox and return to this dialog box.

  Click on the button create a profile, give it a name like OldSettings and skip the option to change the location of the folder. Select the new profile from the dialog box, and then start Firefox.

  Open the new profile folder in Windows Explorer

  Firefox in the new profile should look like a new installation of the plant. Open the troubleshooting information page by using either:

  • button "3-bar" menu > "?" button > troubleshooting information
  • Menu help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table, click on the view file"" button. Firefox will launch your new profile folder in Windows Explorer.

  This folder open, switch back to Firefox and get out by using either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Firefox is closed, the profile folder must be front and Center, or you can activate it by using the taskbar.

  Copy old data instead of new

  In this new profile folder you just popped open - NOT the one on your desktop - select all content (you can use Ctrl + a) and delete (you can press Delete on the keyboard).

  Leave this window open, open or switch to your folder of old data of Firefox. Consult your old profile folder. At this level, you should see a folder named bookmarkbackups among other things.

  Select all (Ctrl + a) and copy (or right-click > copy or Ctrl + c).

  Switch to the empty profile folder in another window and paste (or right-click > paste or Ctrl + v). This may take a few minutes because some files are large.

  Launch Firefox

  Firefox should start in this 'new' profile with the old resurrected profile data. Success?

• Cannot delete the Security Module

  OS: RHEL 6.7
  Version: 38.4.0

  I'm trying to unload a security module in Device Manager. When you try to do that, I get the message "cannot remove the module. Is there a solution or path manually remove this device? My goal is to get a WHAT PKCS #11 loaded Module.

  This module is the same (32-bit or 64-bit) version as the version of Firefox you are using?

  You may also add the ACE in the card reader when loading this module.

  • https://help.Ubuntu.com/community/CommonAccessCard

  It is perhaps better to ask advice to one of the community forums listed mentioned here:

  • https://developer.Mozilla.org/en-us/docs/Mozilla/projects/NSS

• Suddenly I cannot view my options or modules. What did you do?

  When I click the icon on my toolbar options and then click on Options or modules, nothing happens, so I can't access either.

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac = Options) key and then from Firefox. Is always the problem?