WSUS fails to import updates

Similar Questions

• 13 important updates failing repeatedly

  KB953297, KB972581, KB973593, KB973709, KB969604, KB957789, KB969559, KB969613, KB973704, KB974234, KB976416, KB974561, the 2007 Microsoft Office Suite Service Pack 2 (SP2) keep not again and again, what I can do to find out what is causing my updates to fail?

  Hello

  Are there any error messages?

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Auto windows update says there are 2 important updates, but after trying the said that they failed with an error 646.

  Windows Update set to automatic download important updates.  He worked until a week ago, it indicates that it is 2 important updates.  He tried to download these two updates since 3/10, but they fail and he says that there is an error 646.  What is the problem?

  

  You can try to download the updates manually (search for a download) and install the same.
  http://www.Microsoft.com/downloads/search.aspx?displaylang=en)

  This is the current solution for office updats in particular.

  TaurArian [MVP] 2005-2010 - Update Services

• My Windows update fails to install the important update 3, and the error code is Code 8007045 D. Anyone had this happen, and how can I fix it?

  Code 8007045 that appear when Windows Update fails to install important updates

  Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really don't need to install this update anyway so you can just "hide".

  HOW to hide an update or restore a hidden update
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get this error code 646 everytime I go to install the important updates. Updates failed to install. Have: Windows Vista editions Home Premium and laptop Toshiba Satellite. How to fix?

  For about 4 days, it says install important updates, I try and it manages not to install message says to try again, and he still fails to install important updates.  When I turned off my computer, the message says installation step 1... 2... 3..., but still, it will fail to install.  I never had a problem with it before.  Last week, I started having this problem.  It will not install updates importamnt.  Please help, I need to install my updates.  Thanks in advance.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Atheros Driver: Important update failed

  Satellite A205-S5843

  Windows 7 Home Premium, 32-bit operating system

  My network connection works. Update of Windows listed and marked the Atheros AR5007EG Wireless Network Adapter as an important update. The update fails during installation.

  Measures taken and error messages:

  1. Windows Update list Atherod a driver update important. The installation failed. "Code 800F0203 Windows Update has encountered an error unknown."
  2. Do you have a reboot. Same mistake.
  3. Execution of the Fix - It http://support/microsoft.com/kb/971058 that resets the Windows Components Wizard.
  4. Delete the Temp folder. Ran scannow.
  5. Turn it back on. Same mistake.
  6. I was able to complete the 2 Optional updates.
  7. Open the Device Manager. Right clicked and selected update driver software. Error message: 'Atheros AR5007EG Wireless Network Adapter Found. Error during installation. There is no driver selected for the item or a set of device information. »

  It can be useful if I could erase the driver update from the list of Windows Update and let it do a clean search.

  Any technical assistance or shared experience will be greatly appreciated.

  Brummyfan2, I apologize if my previous answer sounded rude. When I type, sometimes, short words carry not correctly my thoughts. You do not give the solution to part of the problem, and I appreciated your advice.

  For others who may have the same problem, see https://uk.answers.yahoo.com/question/index?qid=20100428074233AAz3rhl

  Mark the update as masked Atheros. -Open Windows Update, click right on the Atheros updates and select hide.

  Part 2 of the above referenced instructions says to delete the files downloaded for updates. I did it; I don't think, however, that it was necessary.

• Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update

  Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update successfully. I'm not a pc expert and don't have no knowledge will take it the word of experts from the pc. KB2698365 is 'important', so I tried to install it several times, but always failing with error code 80070570. I've been on a boring treasure hunt for to install this 'important' update, it seems to find no will to give helpful advice anywhere. I would appreciate help installation of this major update, and talk about normal advice, how to install it successfully without failure of the error code 80070570. What is the error code 80070570.? I use windows vista Home premium, service pack 2, 32-bit operating system. I'm using the essentials of security. Thank you for the consideration of this issue. NIC

  Hi, Grizzly7659,

  Follow the instructions given by Taurian & guenoun

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070570/a2df7d06-BE9B-4554-b796-c52fac838842

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070570/51c5b0d3-BFDD-4f69-bff7-623954866b59

• After you download the Office Svc. 3 Pack, 6 important updates & 2 other updates failed due to an error 57F

  I have a PC with Vista Home Basic and remote access service. He sent me a message that the updates were available so I started the process. It downloaded & installed Office Service Pack 3 and all but 6 significant updates and 2 other updates failed. I tried 3 times to download & install the important updates 6 & when all 3 attempts have finished, the report indicates a 57F error code. In another location, trying to get specific information, I found: WindowsUpdate__0000057E and also Update__dt000 from Windows have been listed as the following:

  1) office 2003 Service Pack 3 (SP3) 108.2 MB

  (2) update 4 Microsoft Office 2003 (KB2543854) 12 K

  (3) update 4 Microsoft filter junk e-mail in Outlook 2003 (KB2553111) 3.4 MB

  (4) update 4 Microsoft filter junk e-mail in Outlook 2003 (KB2597035) 3.4 MB

  (5) update 4 Microsoft filter junk e-mail in Outlook 2003 (KB2598343) 3.4 MB

  (6) the update for Office 2003 (KB907417) 225 KB

  I hope someone can help to direct me to download & install the updates failed. Thank you!

  Hi Linda,

  Please, give him another chance & perform the procedure below

  Diagnosis: The permissions were incorrect for some registry keys.

  Considerations: I've used this for Vista Ultimate SP1 and Office 2003 SP3. A similar procedure may work for other versions of office and Windows, I don't know.

  You need to be reasonably computer or ask someone who is. You will need the installation of office files.

  Important note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  FIX: You * may * be able to use to Repair Office 2003 to identify the keys to the problem and then use the Registry Editor to change the relevant key permissions:

  1. connect to your computer as an administrator (if you can install programs, it is likely that you are an admin).

  2. run the Registry Editor (Start > run and run regedit).

  3. in the registry from backup of your registry Editor (select the top node of the computer, and then click file > export, save the file somewhere sensitive.). (Do not close the registry editor, yet).

  4. run a repair for Office 2003 (see relevant Microsoft KB).

  5. When you get an error in the repair process using the registry editor, find the EXACT registry key named on the command prompt (using the easy to find, Ctrl + F4 and F3 to repeat).

  6. right click on the key and select permissions on the shortcut menu.

  7 set the user groups to enable total control and reading (click OK to save the changes).

  DO NOT CHANGE A KEY UNLESS IT IS EXACTLY THE SAME AS IN THE REPAIR LINE.

  8. in repair, click the Retry button.

  9. If the error prompt is replaced by another invite for a different key then the fix worked. Repeat step 5 above for the new registry key.

  10. If the error reoccurs prompt then repeat step 6, but assign another likely group of total control, for example the system.

  11 when all the keys have been updated and the repair finishes and then close the registry editor, then try Windows Update again.

  12. If this does not correct the problem, then you must restore your backup registry file.

  PostScript: If you experience system problems after that you can restore the registry by double-clicking the registry file that you saved. If you can not do a repair of Office or run the registry editor, then you may not be an administrator.

  Also try running the difficulty to reset the components of Windows updates from the following link.
  How to reset the Windows Update components?
  
  http://support.Microsoft.com/kb/971058
   
  For more information, click on the link below,

  How to troubleshoot incidents to update your installation of Office on the Office Update Web site

  http://support.Microsoft.com/kb/304498

• Important update "windows 7 service pack 1 (KB976932)" fails to install?

  Error code - 80073701

  Important update "windows 7 service pack 1 (KB976932)" fails to install?

  Hi Manon,.

  To resolve your concern, you can run the System Update tool.

  Follow the steps below to run the system update tool:

  1. Go to the page to download the system update tool . You can click here.
  2. Click on download.
  3. When the download screen appears, click Open.
  4. When Windows Update Standalone Installer appears, click Yes.
  5. Once the installation is complete, click close.
  6. Click the Start button, type cmd in the search box, and then click cmd.exe.
  7. At the command prompt, type sfc/scannow, and then press ENTER.
  8. Once the analysis is complete, click the Start button, then type stand-alone Windows Update installation in the search box, and then click Windows Update Standalone Installer.
  9. Click Yes, and then once the installation is complete, click close.
  10. Once the scan is complete, try to reinstall SP1.

  If you still getting the same error message, uninstall unused language packs may solve your problem.

  To uninstall a language pack, follow these steps:

  1. Click Startand then click Control Panel.
  2. Click on clock, language and region.
  3. Under regional and language, click on install or Uninstall display languages.
  4. In the install or uninstall display languages window, click Uninstall display languages.
  5. Select only the languages installed that you do not use and then click Next.
  6. Once the uninstall is complete, try to reinstall SP1.

  For more information on how to fix error 0 x 80073701, click here.

  Let us know how it goes.

  Kind regards

  BIA of Hamilton

  You can use the mark as answer button, if this post responds to your request.

• HELP the important updates fail to install-(KB951550, KB949046, KB967642 KB951944)

  • HELPremember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I had trouble with these updates to install... the above is 4 of 5 failures:

  I have files cleaning, registry clean up and tried manually download the 5th of the 5 failures of Microsoft office was updated for service pack 1 all went fine til one message said I had already had this update.  Still, it appears in the window to update for important updates.

  If it's important I downloaded Microsoft Project 2007 60-day trial 2 days ago...?
  Help

  See the section "How to get help", for example, http://support.microsoft.com/kb/951550

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failed to download important updates for Windows Vista.

  I tried several times to download 6 important updates to my computer through Windows Update. I get messages saying that it was successful. Even after restarting my computer, I always shows that I have 6 important updates that must be installed. Please help me.

  Try to download the updates & manual installation, just note the update #, then open

  Catalogue update in the updates type Windows, here is the link.

  http://catalog.update.Microsoft.com/v7/site/home.aspx

• Cannot install important updates - code 80070570 and 8007371B

  I have not been able to download and install important updates for months.  There must be at least 50 to 60 times where my computer tried to download important updates (including service packs) and the process has failed. What is the problem?  How can I fix?

  eagle0021,
  Here is an article dealing with the error code 80070570.  Go through the steps inside and then post the results when you post back with the information requested by the PA bear.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win7 (Home Premium) cannot start after "important update"

  I just bought a new PC with Windows 7 Home Premium pre-installed. After an update that Win7 launch is no longer, instead the PC reboots from the BIOS. Now, as I write to you from my old XP system, I do that I can't do this post shouldn't indicate that I found a solution. Using the utilities available / suggested at this stage, I can't understand what the 'important' update was so am not able to retrace the steps that may have caused problems. Currently, I run the system recovery, so maybe in a few minutes, I might be able to use the WIN7 PC again. However, I would like to know if anyone else is / has been faced with this problem.

  Hi isamart,

  First of all, I suggest to start the computer in safe mode and see if you can boot to the desktop.

  To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  Access the link to learn more about how to start the computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  If you are able to access safe mode, you can try to check the update installed on your computer and remove it and check if that helps.

  To view and remove the updates installed, follow the steps below.

  1. click on start

  2. in the start search box type appwiz.cpl, and then on enter.

  1. click on view the updates installed in the left pane.

  2. take note of the recently installed update in the list and remove the update.

  3. restart the computer and check if you can start.

  If the steps above fail, you try to perform a system restore on your computer to an earlier date and check if you can boot to the desktop.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to find more information about the system restore.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Netframe3.5 service pack 1 cannot install important updates I get an error

  I can't net framework 3.5 to install correctly, I get an error message indicating Micrsoft has encountered a problem and needs to close. then he told me of important updates have not been installed

  Hi claygirl

  ·         What is the operating system installed on your computer?

  ·         Please provide the number of the failed update.

  Steps to check the number:

  i. open Control Panel from the start menu

  II. Select programs and features

  III. click on view installed updated

  1. I suggest you download the .net framework removal tool from the link below: http://blogs.msdn.com/astebner/pages/8904493.aspx and remove .net Framework completely from your computer.

  2. reset the component of windows update and then try to install the updates, check if the problem is resolved. It has Fix tool link below will help you with the same

  How to reset the Windows Update components: http://support.microsoft.com/kb/971058

  If the patch tool does not help, you can follow the manual procedure

  3. After completing the two steps, restart the computer and let windows update install the .net Framework.

  You can even try to download manually from the link below and:

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install 4 (important) updates and receive the 646 code. I have MS Office Home and Student 2007 Vista

  1 - update for MS Excel 2007 (KB973593)
  2 - update for the system of MS Office (KB973704)
  3 - update for MS Office InfoPath 2007 (KB976416)
  4 - update for Word of MS Office (KB974561)
  Tried several times but received same code 646 every time.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.