WT8-A-102 does support composite video?

Similar Questions

• WT8-B-102 does not start even after charging

  I recently bought a Toshiba WT8-B-102, and I have some problems with it.

  First of all, I couldn't install the update to the BIOS for a reason, but this isn't a huge problem for the work of the Tablet very well

  but now I can't start it over. yesterday, I had the same problem, the tab left alone for a while (on the charger) and after that there no start/start. half an hour later, I tried again (after taking the charger) and then he started, but today it won't start at all. Even if I load for a few hours, then try again, try to start charging, etc. It's not good right?

  I don't see that some led light or any other sign when I attach it to the charger. Any help or ideas guys?

  Thank you

  Probably the battery is totally discharged.
  In this case, you need to charge the battery by connecting the power adapter for 30 minutes before turning the power on

  Yet WT8 and Encore WT10 won't turn on after some time of no use
  http://APS2.toshiba-tro.de/KB0/TSB4903N80001R01.htm

  If this will not help, the device must be checked for possible hardware problems.

• DPL does support composite index?

  Hi all.
  
  If I have a table
  CREATE TABLE TABLE_1)
  ID INT PRIMARY KEY,
  C1 INT,
  C2 INT,
  C3 INT
  );
  
  How to implement the 3 queries
  "Select * from table_1 where c1 = 1 and c2 = 2."
  "Select * from table_1 where c2 = c3 = 3 and 2.
  "Select * from table_1 where c1 = 1 and c2 = C3 = 3 and 2"?
  
  As we know, in oracle, just create 2 composite indexes (c1, c2, c3) and (c2, c3). Then all this fact, all queries will be fast.
  But HEY, I don't know cursors to join.
  

• WT8-B-102 - how to connect the external monitor

  Hello

  I have a toshiba WT8-B-102 Tablet and I need to connect an external monitor (vga or hdmi).
  My tablet doesn't have an hdmi port.

  Any solution?

  Best regards
  Francisco

  Hello

  WT8-B-102 does not therefore support other output micro HDMI port the connection to an external monitor or TV isn t possible.

  But as far as I know the Tablet supports the wireless display technology (Miracast / Intel WiDi) and if the TV supports the same technology, you should be able to output the internal display on TV s screen too.

• Qosmio G30 graphics card does support video player Adobe Air?

  Qosmio G30 graphics card does support video player Adobe Air?
  As when I download BBC iplayer TV programmes that they always freeze when I try to read full screen mode.

  Hello

  Why you n t visit the Adobe page and see for yourself
  On the Adobe page, you will find info on all the need of hardware requirements.

  But to be honest, the Qosmio G30 is a powerful machine and strong performance.
  I think that it s not a problem of performance of the material, but maybe some software issue

  Maybe you should try to read downloaded using another player movie files.
  VLC Player is nice, small and free. It supports almost all possible file formats.
  Check it!

• BlackBerry 10 does support the mp4 codec avc video.

  BlackBerry 10 does support video codec avc mp4 when you use the html5 video tag.

  Concerning

  Hi galois,.

  Here is a list of all compatible video formats:

  https://developer.BlackBerry.com/develop/supported_media/bb_media_support_at_a_glance.html#kba132873...

• Does Dreamweaver CS6 Retail Boxed Support HTML5 < video > Tag?

  Hello:

  Retail in box 6 Dreamweaver (not CC) supported inserting video in pages using the tag < video > HTML5?  My client cannot use Flash.   I found conflicting information on the Web.

  Thank you

  Rich Locus

  Perpetual license of the CS6 version does not have the

  Here's the Basic code that I use for html5 video in older versions of DW (with emergency Flash)...

  Paste this code into your source view highlight it, then click on the + button on the bottom of your Snippets window and give it a name. From here out, you just double click on this snippet to add the video. Make sure you have at least two extensions of video source to cover all browsers and're you good to go.

  HTML tag video

• Yet WT8-A-102 stops suddenly and updated the BIOS

  I bought a Toshiba still WT8-A-102 (not part no PDW09E-00100EEN) to the end of 2014. I upgraded from Windows 8 for Windows 10 Home Version 1511 without any problem in 2015.

  I use it for a limited number of applications - Office365 and navigation, generally with Chrome and Hola VPN to access certain geographically limited websites, for example TV channels, watch movies and content recorded from my TV (these are generally. TSV format); I run the free version of Malwarebytes and AVG anti-virus.

  I have two problems I can solve t.
  
  1 stop abrupt
  For a few months now, it always turns off suddenly, always exactly 30 minutes after the start. There is no warning, the screen goes black and that s it. You can immediately restart and continue as before, but the same thing will happen again after another 30 minutes. It happens that it s plugged in or on battery power.

  I can find no reason for this. For example:

  • It didn't happen when I've upgraded to Windows 10 but a few months later.
  • The battery does not turn down.
  • The Tablet does not heat.
  • It occurs regardless of whether you ve been using the Tablet constantly for 30 minutes or simply turn it on and let it idle.
  • Sleep and stop times are set to one hour.

  I ve looked at event viewer and the only things there are a few system errors showing which means nothing to me (a server is not registered within the required). Certainly, there is nothing that happens in the few minutes before it turns off suggesting a reason.

  Any ideas please?
  
  Update 2 BIOS

  I ve installed the different Toshiba updates available for this model. However, the update BIOS doesn t work. She is currently the version 1.60. I ve downloaded the version 1.80 for this model on the desktop. The zip file is bios-20150722112320. I extract it and it starts the process. The Tablet goes on to say it's reboot and then a panel will appear that says:

  InsydeH20 Flash secure
  Invalid firmware image!
  Press any key to reset the system

  It s a Tablet! While they want me to? I ve you press buttons - Windows and volume - but nothing happens. If I just leave it, it turns off after 30 minutes and we re back with BIOS version 1.60 and I can work as usual.

  Although this seems excessive, but suggestions please?

  Thanks a lot for any advice,
  John

  It seems that your problem is similar to mine. I'm having the same random stop downs https://forum.toshiba.eu/showthread...-Error-Code-10 also I have an error code 10 in Device Manager. The agenda called "Intel Trusted execution engine Interface"... are you facing the same error?

  I sent my tablet at the service of Toshiba, it has been over a month now and still waiting to be informed about the problem!

• Toshiba WT8-A-102 - platform driver to win 10 missing Intel

  TOSHIBA - I REQUEST - THIS IS WHERE INTEL PLATFORM DRIVER FOR WINDOWS 10!

  Status on the page of the driver Toshiba Windows 10 has changed.
  Now, he said: supported model, all of the software available for the upgrade to Windows 10.
  Details: Your PC selected Toshiba is supported for upgrading to Windows 10. All of the software to upgrade is now available. (September 24, 2015)

  ALL SOFTWARE?
  It's ridiculous!
  Nothing has changed - it is not nothing added / updated.
  That status has been updated!

  So Yes - when you want to do a clean install of Windows 10 in Tablet - don't forget that there will be many difficulties / problems as Windows 8.1 Intel Platform Driver, some drivers in Lenevo site installation and some on HP site...

  And besides - Lenevo released drivers for WIndows 10 for their (very similar to even the series) tablets.
  HP also released drivers for HP stream 8 tablets series

  Oh, Toshiba - watch and learn from the best:
  http://support.HP.com/us-en/drivers/selfservice/HP-stream-8-tablet/7439999/model/7682267#Z7_3054ICK0...

  I'm sure that in the only thing Drivers Toshiba development section that make workers is eating donuts and coffee to drink...

  NICE 'SUPPORT' TOSHIBA!
  This is my first and last Toshiba product, because the support is really bad...

  Message has been changed: image has been deleted - bashing

  So Yes - when you want to do a clean install of Windows 10 in tablet...

  Toshiba supports Windows 10 UPGRADE on this tablet.
  Upgrade means that you must upgrade the current system Windows 8.1 to Windows 10 using the Microsoft upgrade procedure.

  Most of the drivers and software that was preinstalled on Windows 8.1 is compatible with Windows 10.

  All other drivers and software that are not completely compatible with Windows 10 can be downloaded and updated from this page or by using the preinstalled Toshiba Service Station:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  In addition Intel drivers are designed and provided by Intel, and can be downloaded directly from the Intel download page

  By the way: there is already a thread of forum on the recall WT8-B-102 - experience with update Win10
  https://Forum.Toshiba.EU/showthread.php?84732

  User PL Légion has provided information of great experience:

  I can say this: everything works in Win10 and 8.1 (with Bing) on this particular model, if YOU DON'T TOUCH THE MY TOSHIBA UPDATE, SAVE for THE BIOS UPDATES. Don't touch wireless and others. Install the drivers from there WIN 8.1 made disappear from my WIRELESS card and I had to go back to the factory settings. I disabled this shit after that and this is upgrade to Win10. Everything works well: WLAN, cameras, etc.

  Here more info about 10 Windows upgrade:

  http://www.Toshiba.EU/innovation/generic/Windows10/

  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  http://win10upgrade.Toshiba.com

  Additional pages:

  Model Toshiba taken in charge for the upgrade to Windows 10
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG
  Models not listed do not support an upgrade to Windows 10.

  Microsoft also provides information on own upgrade on this page:
  http://www.Windows.com/windows10upgrade

  and you'll find all the Microsoft Windows 10 FAQ - Q & A
  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

• Tecra 8000 composite video output

  I'm running the video output from my tecra 8000 via yellow composite video connector at the rear of the unit. I thought it was as simple as pluging in both sides of a RCA (one end to the video input of a video recorder) Jack and the other end into the video Tecra.
  I get NOTHING on the screen. What I am doing wrong?

  Thanks in advance

  Hello

  normally, you have to pass the video signal in the composite connection.
  For this (on newer models at least) by pressing FN + F5.
  This combination toggles the 'next' display/device combination
  If the videodevice primary and standard is the internal TFT, pressing FN + F5 once going to signal internal both TFT and RGB (monitor connector). Next time you press it, it will only in RGB, and next time, again, it should go to the TV output (composite).

  Try it!

  BR
  Tom

• Toshiba WT8-A-102 - power problems

  Toshiba WT8-A-102 PDW09E - 00100EEN

  Hello

  I tried to lift a warranty call, but got stuck in a loop Q & A who dropped out, and he presented me with an e-mail form. Completed with all relevant details, but I have received no acknowledgement of receipt of email.

  Anyone know of a SIMPLE way to just raise a ticket, under warranty, for a Tablet where I've got the S/N and P/N and the documents on file command?

  Tablet of my son is still under warranty - he ordered at the end of February of last year and was received in March - but now we'll have problems with it. More often than otherwise, if my son or I press the power button briefly, we get the Toshiba POST screen until the power turns off.

  We even left the tablet in a cradle of office when it turn, so the charge cable and tablet itself does not move between attempts - and sometimes it'll turn on leaving us after many attempts where nothing happened when we pressed the button.

  We swapped with known good cables, so we know that's not the issue.

  On the rare occasion, it stays energized long enough to go to the login screen it still can't do anything with him because the power turns off as soon as the CPU put under any load. Once Windows says that the battery was at 0%, but load. I left it for 15 minutes and it's always 0%. I then put to some Windows updates without disturbing the laptop or power cable and the power cut out less than a minute later. For obvious reasons, this excludes the ability to perform updates BIOS; We simply cannot risk of bricking it.

  So any ideas? Personally I prefer to exchange it for a laptop and pay the difference, but I'd settle for a warranty repair, if only I had a way of presenting that would send me an email back!

  Your tablet is still under warranty, it's good news because in the event of hardware problems, should be set the Tablet for free.

  What you have to do now, is to contact the Toshiba authorised service provider in your country to organize the next steps.

  Here you will find the responsible ASP in your area:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Yet WT8-A-102 screen auto rotation after update not

  Yet WT8-A-102 screen auto rotation after update not
  I have re installed the drivers

  Now the Tablet does not start-> error - system thread unhandled exception

  The system Thread Exception BSOD error unhandled in Windows 8 arises especially due to incompatible or old graphics card drivers.

  I assume that you have installed drivers that were not compatible
  To solve this problem I recommend you choose the Windows repair procedure

  You should start the tablet in the menu boot device
  Press on and hold the flight button + and hold also the power button until the device turns on and the boot device selection menu appears.

  Now you should be able to choose the option of HARD drive recovery.
  Then choose troubleshooting and got advanced options
  Here, you should be able to repair the system automatically.

  Useful info:
  http://APS2.toshiba-tro.de/KB0/HTD4103K90000R01.htm

• Still 2 WT8-B-102 - GPS availability

  Now that I have the new 1.90 BIOS I tried to install the GPS driver I found contradictory weather info the device has GPS and GPS driver is available in the relevant download section.

  Guess where I get the message during installation: "unsupported configuration of the Machine" that there is really no GPS...?

  Kind regards
  Rainer

  According to the Encore 2 WT8-B-102 specifications page, the device supports the gyroscopic acceleration sensor and 3D, but there is certainly no GPS module.

• How to connect TV again WT8-B-102

  Hello

  I have toshiba still wt8 b 102. I don't have a micro hdmi, micro usb only. How can I connect my tablet to tv (no wifi)?

  Post edited by: kropek

  According to the datasheet of Toshiba STILL WT8-A-102, the table supports the micro HDMI port output.

  This port can be used to relate the table to TV s HDMI IN port.

  Of course, this requires the use of micro HDMI to HDMI Cable

• Yet WT8-A-102 - USB for pc connection

  So I have Toshiba still WT8-A-102 and I want to connect it to my laptop via USB, I OTG cable micro usb to usb female, male-male usb cable, but still my laptop can not recognize me, so I need you to install drivers on my Tablet?

  Friendly V

  You n t need any additional driver
  If you want to connect this table to the laptop, you should not use adapters.
  The Tablet supports the micro-USB port.
  Use a cable / USB micro USB to connect the Tablet