WUSB600N detects the wireless network, but fails to register.

Hi all!

Recently, I bought a WUSB600N adapter for my pc to share a wireless network and internet between the WAG120N router, my laptop and my pc. I installed the adapter successfully in my pc, but whenever I try to connect to the router, it detects the network wireless signl forcefully excellent, but fails to establish a connection. The error indicates that the security key is incorrect or the router is not in the range of availability. As mentioned, the signal is strong and the key is correct. I even removed the security key once and tried to connect, but the results were the same.

So what's the problem? What should I do?

Thanks in advance.

I finally managed to fix the problem.

I realized that my WUSB600N MAC address is not registered with the router. I tried everything possible and it didn't work... untilI I entered the adapter ' MAC in authorized MAC addresses for the router. and now it works perfectly.

I think I have to get along that the adapter has serious problems with XP in the first installation, but after the have registered manually, it works fine.

Tags: Linksys Adapters

Similar Questions

  • Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

    The title says it all really.

    I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
    Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
    Help, please.
    Thank you.
    original title: vista detection network but will not connect

    Hi JulianBeach,

    1. you have made no changes to the computer before the broadcast took place?
    2. What is the exact error message you get?
    3 is connected to the domain of the computer?
    4. what happens when you try to connect to the network?

    Try the steps from the following link:
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Additional information:
    Wireless network card: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  • Able to detect the wireless network but cannot connect

    Help, please!

    I have a HP Pavilion DV6 using Windows Vista 64-bit.

    My network wireless adapter intel is able to detect wireless networks three on my College campus.  I know that these networks is currently (I can access it on other devices and my suitemates can view them on their laptops.

    When I double-click a network dialog box appears and informs me that the laptop is currently connected to the network.  After about 30 seconds it says it is unable to connect and an opportunity to try the troubleshooting options (which, alas, never work).  I recently tried to download the latest drivers for the network adapter, but also, it does not work.  The adapter is turned on via the switch on the keyboard and the HP Network Assistant.

    What should I do?

    Hello

    You have a few options in my opinion please try these steps can help you solve your problem.

    (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

    (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

    (3) try to do a system restore to the date where unit was working fine.

    (4) Please update the Bios driver & wireless from the HP website.

    (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

    (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

    If you still have the same issue then you need to call HP tech support and get the replaced part.

  • HP 15 D103tx: can't detect the wireless network adapter in Device Manager.

    I can't detect wireless network adapter in the device even Manager after installing the drivers wireless from the following link: http://support.hp.com/in-en/drivers/selfservice/HP-15-d100-Notebook-PC-series/6782098/model/6837966?...

    Wireless "F12" key remains orange color after pressing it several times. I tried to install "Drivers HP wireless button" from the link above, but between th installation process I have error ot OS isn't accomanied for pilots

    I can't connect to a wireless network from my wireless adapter doesn't work. I have to sit near my wifi router to connect with laptop computer using lan cable.

    Even HP Support Assistant does not detect the wireless network card hardware

    Help, please!

    Hello

    According to HP Partsurfer, your lapotp came with Atheros AR9565 802.11bgn 1 x 1 WiFi and Bluetooth 4.0 adapter combination WLAN. Also, your laptop came with FreeDos and I guess currently installed Windows 8 64 bit OS, I am correct?

    The Support page for your machine, doesn't show that the Realtek RTL8188EE 802.11b/g/n Wireless LAN Driver for Windows 8.

    Please download, save & install the Dirver and restart the system, check if the wireless works.

    Concerning

    Visruth

  • Photosmart C6180 cannot detect the wireless network

    I have a Photosmart C6180 for over a year, and until recently it connected wireless very well.  But since a week ago, it can't detect the wireless network.  I turned off the printer and wireless router several times each without success.  The "Wireless Setup Wizard" running on the C6180does not help. Watch simply screen printer "looking for... wireless router. "indefinitely, until the function Cancel.  The wireless router is about four feet from the printer, in a direct line of sight.  In addition, I have wireless Internet access using the same router and continue to do this successfully, then the router itself works.  Recently I have updated the firmware on the router as well (after the beginning of this problem).  Running the network Test report wireless on a 'PASS' C6180 returns for "Radio on" but a "FAILURE" for "use of Radio". The radio broadcasts as "about" section of the Menu Radio wireless network.  My router is a Belkin Wireless G Router model F5D7230-4.  The printer prints very well with a wired connection, but wireless connectivity has been a key reason behind my purchase.  Any suggestions greatly appreciated.

    Sorry, but your wireless radio is dead.  Its time for a new printer.

  • Laptop detects the neighbouring network but not my home network?

    My problem is the following...

    My Hp Pavilion dv4 1225dx Vista SP1 computer laptop works very well on our router WRT160, computer laptop Dell Inspiron 8600 XP SP2 from husbands can detect the neighbouring network but not ours. Any suggestions, I searched the forums for answers with no luck.  Thanks in advance!

    Change the channel and SSID or.

  • My PC is connected to the wireless network, but it is impossible to open any internet page. I went through the diagnosis of Internet Explorer, see below.

    Diagnosis of last run time: 28/01/12 10:16:32 Gateway diagnosis

    Entry door

    Info the following proxy configuration is used by IE: automatically detect settings: enabled Automatic Configuration Script: Proxy Server: Proxy bypass list:

    info could not get the proxy settings via the Proxy Automatic Configuration mechanism

    Info this computer has the following (s) default gateway: 0.0.0.0

    warn that there is no default gateway entry

    repair automatic action: reset the network connection

    action to disable the network card

    activation of the card network action

    successfully activated information network adapter

    Info this computer has the following (s) default gateway: 0.0.0.0

    warn that there is no default gateway entry

    user redirection of information in support of the appeal

    IP layer diagnostic

    Corrupted IP routing table

    prevent the default route is missing or not valid

    Invalid entries in the ARP cache

    action cache ARP has been emptied

    Diagnosis of IP Configuration

    Invalid IP address

    detected info valid IP address: 192.168.0.1

    Wireless diagnosis

    Wireless - Service disabled

    Wireless - user SSID

    required user input action: specify the name of the network or the SSID

    Wireless - first installation

    Info the name of the wireless network (SSID) to which the user wants to connect is IrinaLaptop-router.

    Wireless - Radio

    detected info valid IP address: 192.168.0.1

    Wireless - off limits

    Wireless - hardware problem

    Wireless - Novice user

    Wireless - network Ad - hoc

    Wireless - less preferred

    Wireless - 802. 1 active x

    Wireless - Configuration mismatch

    Wireless - low SNR

    WinSock diagnostic

    WinSock status

    info all base service provider entries are present in the Winsock Catalog.

    channels of information the Winsock Service provider are valid.

    Info entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.

    Info entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.

    Info entry RSVP UDP Service Provider provider passed the loopback communication test.

    Info entry RSVP TCP Service Provider provider passed the loopback communication test.

    Info connectivity is valid for all Winsock service providers.

    Diagnosis of network adapter

    Network location detection

    Info to help home Internet connection

    Identification of network adapter

    Info network connection: name = connection to the LAN, device = Broadcom 440 x 10/100 Integrated Controller, MediaType = LAN, type = LAN

    Info network connection: name = wireless network connection, Device = Intel (R) PRO/Wireless 3945ABG Network Connection, MediaType = LAN, type = Wireless

    Info network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394

    Info network connection: name = connection high speed, device = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

    Info network connection: name = blank, peripheral = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

    Info both Ethernet connections and wireless available, ask the user for selection

    required user input action: select network connection

    Info Wireless connection selected

    State of the network adapter

    Info network connection status: connected

    HTTP, HTTPS, FTP Diagnostic

    HTTP, HTTPS, FTP connectivity

    warn HTTP: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

    warn HTTP: error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

    WARN HTTPS: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

    WARN HTTPS: error 12007 connecting to www.passport.net: the server name or address cannot be resolved

    WARN FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

    WARN FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

    error could not make an HTTP connection.

    error could not make an HTTPS connection.

    error could not make an FTP connection.

    I did not want to do this (restore point). However, I found a solution. It comes: http://forums.techguy.org/networking/1029348-network-connection-status-media-disconnected.html

    Where there are two crucial steps (do not know if the two were needed) RUN command (1) netsh int ip reset reset.log and (2) netsh winsock reset catalog

    After a restart, hey presto my wireless connection was repaired. This seems useful, but not essential (shows wireless performance but not the solution): http://wpc.475a.edgecastcdn.net/0047...etup.1.2.0.exe which is run Xirrus Wi-Fi Inspector 
    Thanks for your time!
    Good bye
  • Connected to the wireless network, but can't see all the networks

    I want to look at the properties of a wireless network that I'm not connected, but I can't do this, because even though I am connected to the Internet, some networks are appearing on the list. Please see the image as an attachment.

    Hello Nathaniel,

    Thanks for posting your query on Microsoft Community forum.

    According to the description of the problem, you are connected to internet but cannot see the wireless network through which you are connected. Perhaps, the reason behind this is that some settings get corrupted. Then try below mentioned methods and see if it helps.

    Have you tried to restart the computer and check the status of your problem.

    Try to run in built store and see if it helps you to solve the problem.

    Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

    Run the network troubleshooter utility:

    Try to follow the steps described in the article mentioned below and see if it helps you to solve the problem.

    Why can't I find a wireless network?

    If the problem persists you can try the steps provided by Professor Grim replied on January 19, 2012 in the thread mentioned below.

    No display in Windows 7 64 bit wireless network

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • How can IM connected to the wireless network, but not to the internet, I fix?

    my laptop can no longer connect to the internet, but for the wireless network I can view other computers on the network, but can't go on the internet it says unidentified network.
    I took all the troubleshooting steps to resolve this problem without success.
    all ideas

    Scott,

    Are you the same Scott, I tried to help the last month? If this is you, I left a couple more views. In one of them, I explained that exactly the same problem you encounter happened on my son's computer. I just disabled the router, waited for about ten seconds and he turned his back and that's what it took. I used actually utility of Windows troubleshooting and he advised me to do.
  • problem connecting to the wireless network, but it worked yesterday.

    Yesterday, I was able to connect to my home wireless network, but not today. I also have a laptop and it connects to my wireless network, there must be something with the RT of Surface.

    Home Wireless works, why can't connect?

    Your post is off-topic in the forum Feedback, I moved it on the forum of "Web and Networking" Windows RT.

  • B110A connects to the wireless network but no PC connection

    Hi Forum,

    I just bought a new HP Photosmart B110A printer range. I got set up with my Belkin wireless router. It is successfully connected. I could set up printing webservice as well. The printer is offline and I could also print a document by sending an email to the email address for the printer configuration. This means that the printer is connected to the wireless network and the internet.

    However, I can not connect to this printer from my PC connected to the same wireless netwrok. When I open the HP Solution Center, it displays the message "disconnected wireless.

    When I connect the printer via USB cable, I am able to connect to the PC and impressions as well fire.

    Can anyone help please?

    Kind regards

    Amol

    Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

    What did he say?

  • Qosmio F10: Driver Installation does not detect the wireless network card

    I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

    Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

    I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

    I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

    I still don't the card wireless not yet installed. This happened to someone else?

    I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

    Thank you very much

    Sean

    Hello

    you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

    Sorry I have no other idea.

    Good bye

  • Dell Inspiron 14r 5420 cannot detect the wireless network card

    I scanned several times but still could not detect any wireless adapter.

    And then I tried to uninstall all the cards and install the last card that I had downloaded from http://www.dell.com/support/drivers/us/en/19/ServiceTag/DV1KDT1

    The two of them I tired to install and they have been unzipped successfully, but when I scanned the network adapters in Device Manager, even once, there is no change, all new.

    And I also got this

    When I clicked it, it became like that

    Amicodu,

    Sorry for the delay, got a little because I was absent.

    I don't see your listed wireless adapter. It may have failed or came loose. If you are under warranty, contact Dell Support tech.

    If you are not under warranty, the manual can be found HERE and go to page 45.

    Rick

  • Windows 7 detects the wireless connection but cannot connect (3Com® OfficeConnect® Wireless 54 Mbps 11g Access Point Prod. #3CRWE454G75)

    Dear Microsoft,

    I appreciate all help to fix the inability of my brand new HP G42 notebook with Windows 7 to connect to my home wireless network.

    While I am able to surf the net, cable connection, for the last 4 days and an estimated total more than 20 hours - man, I tried several suggested solution round online to solve this problem, but to no avail so far.

    Windows 7 detects my wireless (WEP security OPEN) but simply could not connect.

    Meanwhile, Dell Latitde 630 my husband w / Windows XP Pro and Mac Book of dauther work very well.

    Thanks in advance for your help.

    LM

     

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Initially, I have will increase temporarily the computer to a place close to the wireless router to compensate for the weak, and or blocked the signal that could be part of the problem in the new suite spot work.

    In the computer itself.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    To ensure that if there are Wireless Utility the utility a seller is not running with the native Windows wireless utility .

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security and try to connect with no. wireless security.

    When work turn the security on the wireless and take the computer back to its original location.

    Jack MVP-networking. EZLAN.NET

  • Satellite sometimes does not detect the wireless network

    Hello

    My laptop Satellite sometimes does not detect wireless networks and the only thing I can do is to restart my computer, is there a solution for this?

    Hello

    Well, in most cases the WLan driver update could solve this problem.
    In addition its advised to check the firmware of the might of Wlan router must be updated as well.
    I recommend also to reset the settings of the WLan router and set it up again

    Another idea; Disable the save option in Win 7 the power supply WLan management

    Welcome them

Maybe you are looking for