WVC210 DYDNS AND PROBLEMS WITH ACCESS TO THE WEB
I have 2 Configuration for WVC210 cameras on dydns of deleted I can't see them on the web. I can access via the local network using the ip address and port or the dyndns name and port. The router has listed as a virtual server and I even put one of them is like DNZ (outside the firewall of the router), the port check tools show a port opened from a remote location. And I can ping. But I can't connect to the camera. Also, I was able to view a WVC54GCA camera with the same configuration. Any ideas?
I can get both of these cameras no problem... just not able to connect but the login box comes right to the top as soon as I hit him enter after you put the URL...
Tags: Linksys Products
Similar Questions
-
I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars. Someone at - it an idea of what's going on.
Hi William e. Swann
1. what web browser do you use?
Method 1:
You can read the following article and check.
Method 2:
You can also read the following article.
How to troubleshoot network connectivity problems in Internet Explorer
Hope this information is useful.
-
problem with access to the image data after you have installed latest windows
Hi, my name s mayur, I got the problem when I open my photos data, actuly I have a computer laptop sony vaio there and I m a photographer so usually I saved my data in my vista drive was slove, so I upgraded mwan Formate c drive and install windows 7 in there then when I cheack my image data in f drive I cant able to see the thuumbs when I open it in the windows image viewer He told me i dnt have the permission to access
I did this solutions
I changed my user to administrator - has not worked
I changed the security settings and gives full control to user - does not work
I've changed owner ship - does not work, I reinstalled vista - not worked
I used hodden administrator - has not worked
I have attached the HDD in the pc of windows genuen - has not worked
I opened my hard drive under linux and not workedI am a hardware engineer also so can someone tell me what will be the reson when I cheak the propertese folder there are a few user (s16561613) with red qustion mark in the authenticated user, my laptop has a genuien windows and now I have installed the windows is not genuine and I dnt have the original windows. so is this problem related to the license... or is the problem of pricing to someone please help me... the security and
Hello
There will not be any support for a pirated copy of Windows. I suggest you install a genuine Windows 7 on the computer and test the issue. If you face the same problem let us know so that we can help you further.
Reference:
Windows Genuine
-
Problems with access to the internet - suspected hardware conflict (IP address)?
Hello
I wonder if you could help out me?
I have problems with internet access on a wireless router with what appears to be a conflict between three different pieces of equipment.
I have a laptop running Windows 7 & an Ipod Touch which access entered it internet without any problem on a Belkin 54 g wireless router.
Everytime I turn on my Windows Vista desktop PC, both devices 'hang up' (not the o/s of just no internet access) desktop PC seems to have access to internet at the outset and then access toggle on and outside.
I then shut down the PC and reset before internet access wireless router is available on the portable computer and the IPOD Touch. I find it very frustrating, because I want that all three devices to be able to access the internet at the same time.
An error message came up initially on the laptop, marking an IP address conflict. I paid for for a guru PC "told" to come take a look at this - he made some changes to the IP address of the desktop computer, then it wouldn't be anywhere near the addresses of the other 2 devices, but this seems not to have solved the problem.
Can you please specify? Any help would be welcome!
Thank you very much
Rob Fleetwood.
Hello
Method 1:
I suggest you follow the link and check.
Windows wireless and wired network connection problems
Method 2:
I suggest you follow the link and check.
The problems of Internet connection
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Method 3:
I suggest you follow the link and check.
Get help with the message "There is an IP address conflict"
-
I have a problem with access to the C drive.
Original title: lost access to the C: drive...
When I was a noob after installing a new HARD drive, I have written an autorun.inf file to my C: drive to make it look cool (you know, give it a cool name, and change the icon). I was not allowed to save .inf in the root files, so I decided to open the properties and tinkering with security... when I turned on my computer later, I now do not have access to the c drive, and cannot do anything administrative (including rear safety switching)
Please, please help!
Hello
Method 1:
You can enable integrated admin and restore the system.
Step 1:
To activate the built-in Administrator account, follow these steps:
a.Click theStart button, then type cmd in the Search box.
In the list of research results, right click on cmdand then click run as administrator.b.At the command prompt, typenet user administrator / Active: Yesand then press ENTER.
net user administrator
, c.Type and then press ENTER.
Note: Please replace the tagwith passwords which you want to set for the administrator account. Type exitand press ENTER. Disconnect from the current user account.
Step 2:
System restore
http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore
Method 2:
If the problem persists, perform a repair installation (upgrade on the spot).
Check out the following link to do the same thing:
http://support.Microsoft.com/kb/2255099Note:
You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.Reference:
Back up your files
http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
It will be useful.
-
I have a problem with access to a Web site on the computer.
I just had to Comcast replace a defective modem/router this morning & now there's a site I can't access it on my desk. I can access it fine without thread through my Smartphone or tablet. But not through my office. I have no problem with all other sites as far as I KNOW
I managed to find the cause of my own. There is no error message, no timeouts. Just went to a blank window. I have disabled the Microsoft Virtual WiFi Miniport card & Realtek PCIe FE Family controller & it solved the problem
-
problems with access to the FS comments
I'm a begineer with VMvare and read a lot of documents on this site, but I'm still not sure about whether it is possible or not, according to
someone who is not the guest user, to access the information stored in the comments SO
I'm developing a web application for one of my clients, and he wants to set up a guest VM Ubuntu running on the server of its host running a MS SBS 2008 SO.
If the web application will run on the Ubuntu Server installed as a guest and I'll be the only administrator of virtual machine of Ubuntu.
My concern is whether we can or not by anyone to access information stored in a guest THEN (Ubuntu Linux) via the file system of the host, through the workstation or directly by the hard file or have it any other way!
How can I be sure that no one will be able to copy the files I put in the httpdocs folder in the guest PC?
Of course, I won't share any folder with the host system, but is - that enough?
Thanks in advance for any help or suggestion...
Best regards
Francesco
Hello, Francesco.
The way I mentioned refers to VMware Workstation 7.0. I don't know if the versions previous to this product or other VMware products include this feature. I assumed so. I have referred in my first answer. However, I thought VMware Infrastructure to be superior to the workstation and, therefore, also include it.
In VMware Workstation 7.0, you go to the Virtual MACHINE menu, choose the settings... item, select the Options tab in the settings dialog that appears, and then choose the encryption setting.
With regard to the question of if you must be an administrator in order to use encryption, I would think so. And I expect an encrypted virtual machine to perform a little more slowly than an unencrypted, but cannot be sure that I have not tried myself.
Sorry for not being able to provide more help, but I'm sure that experts here will be!
Good luck.
Filipe Alves
-
problem with access on the main stage
Hi, how guys I hope you fine
Here is my problem
I have the fla called "game.fla" file and there are a lot of images in the main stage, I want to spend
class called "admin" in the library but how?
I tried to this
parent.gotoAndStop (39);
but it doesn.t work I do not know why
and this is the error message
C:\Users\win7\Desktop\game1\admin1. As line 902 1061: call to a Stop method maybe not defined through a reference with static type flash.display:DisplayObjectContainer.
right ok, I remember now
one solution is to replace
parent.gotoAndPlay)
with
MovieClip (parent) .gotoAndPlay (39)
-
problem with access to the records of oracle on windows 7?
I use windows 7 and after that I installed oracle 11g in my PC, I created a database (DBCA). After that I tried to open my file (SPFILE) server named SPFILEORCL settings. ORA
located in oracle\product\11.1.0\db_1\database... But when I try to open the file it gives me a prompt window ("access denied"), and the only way I could open it is thanks to my administrator account.
My question: it means that it is better to do my job and coding on oracle through the administrator account? or it's always better to use my limited user account, although it does not access to all records of oracle? What is the Advisor for a better future use of the product?
Note: I use 64-bit oracle 11g release 1 on Windows 7 ultimate 64 bit
Published by: user12238193 on December 6, 2009 01:39user12238193,
The spfile is a binary file - edit the file with Notepad/Wordpad or another text editor will corrupt the file. Use the ALTER SYSTEM command to change the values in the spfile. If you want to use a text editor, create a the spfile init.ora, open the file init.ora (in the database folder), change the file init.ora with a text editor, close the database, rename the spfile, the startup of the database. You can then create a new spfile from pfile (init.ora).
The following command will create a the current spfile init.ora:
CREATE PFILE FROM SPFILE;Once Oracle is installed, you should be able to use your limited account. The instance of database (Windows service) must default to run with permissions of the SYSTEM account, so you will always be able to modify the spfile with ALTER SYSTEM command when logged in with your limited account.
UAC (User Access Control) in Windows 7 seems to work a little better than the same functionality in Windows Vista, and if this feature is enabled, even an account to the local administrator group does not work with permissions of administrator permanently. This means that you will not use the limited account to prevent the unexpected drive - by spyware infections.
Charles Hooper
Co-author of "Expert Oracle practices: Oracle Database Administration of the Oak Table.
http://hoopercharles.WordPress.com/
IT Manager/Oracle DBA
K & M-making Machine, Inc. -
Problem with access to the Oracle.DataAccess.dll in the application folder
Hi all.
http://StackOverflow.com/questions/3935808/how-can-i-deploy-a-NET-application-that-uses-ODAC-without-installing-the-whole
Issue. It works with 11g? I don't want to install the whole ODAC on client computers
who is Ellen
Published by: 902645 on 21.01.2012 14:20
Published by: 902645 on 22.01.2012 11:39Download the 11g ODAC Xcopy installation. It is around 50 MB compressed upward and you offer the minimum installation size possible. It is the smallest possible at this moment production which is taken in charge by Oracle. There is a 32-bit version and 64-bit, depending on the version of your .NET Framework.
Be on the lookout for the beta of managed provider ODP.NET fate soon. Which will further reduce the size.
-
Problems with access to the blackBerry Smartphone Internet and e-mail?
Hey everybody
I just got my curve 8900 yesterday t-mobile, and I wondered why I couldn't access the internet and why I couldn't use my messages. Whenever I would try to resemble something upwards using the internet from my blackberry it woud still say something about the subscription. In addition, for messages there it would not allow me to send stuff only save drafts for her, that's why I used the SMS and MMS text to work around my messages. So PLEASE someone please help me understand this problem!
Well, it's basically what I said earlier.
The part of your contract with your operator voice covers some elements:
- Voice
- Voicemail
- SMS/MMS
- (I'm not sure - T-Mobile can give you the full list)
The data item for your contract covers other elements:
- Internet browser
- Applications that require internet access
- (I know - T-Mobile can give you the full list)
You will only receive what you contract for services. So, if you don't have a data contract with T-Mobile, you won't get these services.
Contact T-Mobile and find out what your policy covers. If it covers the services to which you do not have access, it must be changed (since you're already paying for it). If it does not cover data and that you want these services, then you must add to your contract (for the $$$ they will charge).
-
Problems with UTL_HTTP and problems of access to the network
I have a similar problem to what is already on the next thread
https://forums.Oracle.com/thread/2454508
But were unable to come to any solution so more need help!
I have this all works well from my local laptop, but I am not able to run our test (behind a layer switch 7) Server
-- Testing for google.com BEGIN DBMS_NETWORK_ACL_ADMIN.create_acl ( acl => 'google.xml', description => 'Google ACL Control List', principal => 'TEST_USER', is_grant => TRUE, privilege => 'connect'); / BEGIN DBMS_NETWORK_ACL_ADMIN.assign_acl ( acl => 'google.xml', host => 'google.com'); END; / COMMIT; END; /
Run the following as TEST_USER
SQL> select utl_http.request('google.com') from dual 1 select utl_http.request('google.com') from dual * ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1722 ORA-24247: network access denied by access control list (ACL) ORA-06512: at line 1
which suggests that the ACL is the problem, but if I use the tcpportping function
SQL> select tcpportping('google.com',80) from dual TCPPORTPING('GOOGLE.COM',80) ---------------------------- 0 1 row selected Elapsed time: 00:00:00.424
It works very well. If I tried tcpportping with a different host...
SQL> select tcpportping('google.co.uk',80) from dual 1 select tcpportping('google.co.uk',80) from dual * ORA-29260: network error: not connected ORA-06512: at "SYS.UTL_TCP", line 212 ORA-06512: at "SYS.UTL_TCP", line 432 ORA-06512: at "TEST_USER.TCPPORTPING", line 47 ORA-24247: network access denied by access control list (ACL) ORA-06512: at line 1
which makes me think that ACL is not the real issue for "select utl_http.request ('google.com') from dual" as tcpportping does not an ACL problem, but it does for a (supposed) different host.
I can run nslookup to user o/s DB
[oracle@test2 ~]$ nslookup google.com Server: 8.8.8.8 Address: 8.8.8.8#53 Non-authoritative answer: Name: google.com Address: 173.194.34.98 Name: google.com Address: 173.194.34.100 Name: google.com Address: 173.194.34.102 Name: google.com Address: 173.194.34.99 Name: google.com Address: 173.194.34.97 Name: google.com Address: 173.194.34.103 Name: google.com Address: 173.194.34.104 Name: google.com Address: 173.194.34.96 Name: google.com Address: 173.194.34.101 Name: google.com Address: 173.194.34.110 Name: google.com Address: 173.194.34.105
and telnet ok
[oracle@test2 ~]$ telnet google.com 80 Trying 173.194.34.103... Connected to google.com (173.194.34.103). Escape character is '^]'. GET / HTTP/1.0 HTTP/1.0 302 Found Location: http://www.google.co.uk/?gws_rd=cr&ei=aKlKUvKDH8K80QXM1oGABg Cache-Control: private Content-Type: text/html; charset=UTF-8 Set-Cookie: PREF=ID=636a9a715d3e713a:FF=0:TM=1380624744:LM=1380624744:S=UmAm64le9UZRtDQE; expires=Thu, 01-Oct-2015 10:52:24 GMT; path=/; domain=.google.com Set-Cookie: NID=67=vydxBJQUOyjK20AY5G_h7yd23MWHY9L1dxCNRTnkwaVilDsEdMViDB9bbkecMILO7U9SBpTQqGpwBR9y0pL1qcdj0Mx_Rdh_Gu0D3KiunmSIV1nrRdV4Q3T3Y4MKDFLz; expires=Wed, 02-Apr-2014 10:52:24 GMT; path=/; domain=.google.com; HttpOnly P3P: CP="This is not a P3P policy! See http://www.google.com/support/accounts/bin/answer.py?hl=en&answer=151657 for more info." Date: Tue, 01 Oct 2013 10:52:24 GMT Server: gws Content-Length: 261 X-XSS-Protection: 1; mode=block X-Frame-Options: SAMEORIGIN Alternate-Protocol: 80:quic <HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8"> <TITLE>302 Moved</TITLE></HEAD><BODY> <H1>302 Moved</H1> The document has moved <A HREF="http://www.google.co.uk/?gws_rd=cr&ei=aKlKUvKDH8K80QXM1oGABg">here</A>. </BODY></HTML> Connection closed by foreign host. [oracle@test2 ~]$
Then nslookup/ping/telnet of o/s DB user is ok - UTL_TCP (using the TcpPortPing function) is ok - but UTL_HTTP returns errors in the ACL?
Help please?
PS - If I run as user SYS utl_http it fails also
SQL> Session [1] SYS@ORACLE_TEST SQL> select utl_http.request('google.com') from dual 1 select utl_http.request('google.com') from dual * ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1722 ORA-12543: TNS:destination host unreachable ORA-06512: at line 1
Hey guys,.
Problem solved! Thanks a lot to Billy, thomaso and Anar for help.
It turns out that the problem was a whole linux http_proxy variable incorrect! I could find that by using curl on the linux command line and send the trace to a file "curl--trace-ascii debugdump.txt http://www.google.co.uk. The trace file showed a misuse of the http_proxy variable. Once I disconnected the variable and restarted the database - everything was fine. Just a shame it wasn't better logging of oracle - error message was really a Kipper.
* Embarrassed * sorry guys!
See you soon,.
Brent
-
Problem with access to the camera on the net via dsl modem and linksys router
OK, I read all posts here on what to do in this case and think I have tried everything. I have an Actiontec dsl (verizon) and a v2 wrt110 router. I can see the camera locally, but not on the net. I had it hooked to another place but with cable service broadband with no problems.
I think that the problem of my lie with ip addresses.
Camera 192.168.0.115
Router 192.168.0.1
Modem 192.168.1.1
The port forwards on the modem MUST be set to port forward to the IP Address of the Linksys router. It should be only the modem IP can see, so it's the only place you can move forward from the modem. What exactly is in this drop-down list in the config of the modem port forwarding?
The problem is that there are two distinct here networks once you are inside your modem. There is a network between the modem and the router. Allthat is on it is the modem's ethernet interface and the port of the Internet router (or WAN). There is another network on the side the router as your PC's LAN, camera, etc. are on. All know the modem is how to get to the network to which it is directly connected to. While you could add a route staic on the modem to tell him how to get to this network, the modem must still know I have oprt route traffic to your camera to the router.
-
I have a problem with access to the computer after forgetting the password.
Original title: I forgot my password to connect you now I can not access anything that has to with the hard disk drive please help... Computer is going to crash
My laptop monitor is broken, so I stopped using it... haven't used in awhile... now I'm using again and not the password journal-gin admins that I remember... I tried everything... it of not that big of a deal... the biggest problem is that whenever I try to do something that has to do with the hard drive including anything, including updates or access to anything or change all the settings download, he asks for the admin password... My computer will cause crash soon I can't save anything without the password. Help, please!? WHAT SHOULD I DO?
[Moved from comments]
Hello
"What to do if you forget your Windows password"
http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
"If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
See you soon.
-
Problems with access to the ASM in Oracle 11.2.0.1
Hi all
In my database of the UAT, I saw that all of my services database are running.
[Home/oracle] Oracle@blrvqorasdb01:ARSUATDB > ps - ef | grep pmon
Oracle 4409 3229 0 09:34:57? 0: 12 ora_pmon_ARSUATDB
Oracle 10111 9608-0 15:59:59 pts/6 0:00 grep pmon
Oracle 4053 3229 0 09:31:40? 0:08 asm_pmon_ + ASM
When I logged my ASM profile as a sysasm I get the below error: -.
[Home/oracle] Oracle@blrvqorasdb01:+ASM > sqlplus "/ as sysasm.
SQL * more: Production release 11.2.0.1.0 Sun Dec 16 16:08:47 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-09817: write the file verification failed.
SVR4 error: 28: no space is available on the device
Additional information: 12
ORA-01075: you are currently connected
I am able to connect to the database and create objects in there. Can someone advice me why I get the above error.
To work around the problem I thought to stop and start the ASM instance, but I get the error below: -.
Oracle@blrvqorasdb01:+ASM [u01/11.2.0/grid] > srvctl stop asm f
RPRC-1070: could not verify if the ora.asm resource is registered
Cannot communicate with crsd
Please advice...
Kind regards
AalamiAccording to the error:
"ORA-09817: write the file verification failed."Look at the HOME of ASM page ($GRID_HOME) and check for free space.
You can also check the AUDIT_FILE_DEST parameterfor example:
sqlplus "/ as sysasm" SQL> show parameter audit_file_dest; NAME TYPE VALUE ------------------------------------ --------------- ------------------------------------- audit_file_dest string /u01/app/11.2.0.2/grid/rdbms/audit
ATT
Victor
Maybe you are looking for
-
Since the DL the last worm 34.0.5 FF, I now spend my mouse for nothing to take. Also, when I play a video or live site TV the sound is good but the video is choppy and I have to constantly keep moving the mouse for him to play. This never happened be
-
This product lets you record vhs tapes on dvd/cd with or without remote control? Thank you.
-
I spilled water on the Acer Aspire V3-371. How to remove battery?
I can't find a manual for this model with a detailed description.
-
Slightly broken headphone jack
Its got very loose over time, and now the sound a little cut if any small amount of pressure is put on the card. Its really annoying when I plug it into my sound system and it comes all together Cup but not so much with the headphones. It seems that
-
Message to voicemail for blackBerry Smartphones help registration
I have a blackberry curve 8330 with alltel service. I had initially recorded a message for my voicemail on my phone. I was wondering if anyone knew if it could be changed back to the original factory registration. Thank you for your help in advance