WVC54GCA two cameras record

Similar Questions

• I got two sources of camera the same audio recording - how to use multicam to audio synchronization and display TWO cameras simultaneously

  I had two sources of camera recording the same audio - I want to be able to do is use mulitcam SYNCHRONIZE the audio and video at the same time and be able to use the two clips simultaneously in a video - multicam - how can we use the TWO videos? In Multicam, I can only go to one video at a time - is to detach anyway, so I can trim two camera responsition camera and 1 on a 16:9 screen? What would be the best way to do this? Any help would be welcome - Ty

  

  Two PPut copies the multicam in editing element, one on the other.

• Clips on a shoot with two cameras

  I'm was scheduled to begin shooting a film in a few days, which will involve my F55 and an F5 as second camera. For installation, there will be a PMW-200 as the third camera. Just called me to say the naming convention clip that they wish to use for both cameras, and I just got the eggy conversation where I explain that this is not possible right now. The firmware was updated. To come. Blah blah.

  The cameras will be time synchronized jam.

  I wonder if someone has suggestions for how unambiguous and easily differentiate between the two cameras. The ideal would be to change the clip naming, perhaps in the content browser, but I don't see a way to do this.

  Thanks for this Leon. Clip browser it and let the wrangler data to worry about this. We are actually recording to SxS rather raw, so I hope that with my setup enough vanilla and a very little bit of tweaking things must be upward. I intend to shoot mechiers at the head of each location.

  200 gets specific coverage for a scene so I'm not too worried about the match up there; This choice of camera was production and dictated by the budget.

  Speaking with the customer we discussed lockits, but decided to digislate and frequentish jams. Years ago, I came across a problem with a specific batch of Digibetas that has blurred the timecode so continually fed an external signal. It was salvagable to the end, but headache than the left lingers as well with the other weaknesses that I'm getting used to this camera and after having heard about free delivery issues, others have mentioned I thought it is better to let the lockits this time!

  I am in England so shoot 25 p. So far, I used the camera with the crossing record, in part because of talk of free running jumps (possibly a message by you). What was your rate when you have had free delivery issues and you have noticed with firmware 1.13?

• Can't see two cameras PointGrey (FlyCap2) max

  Hello everyone.  I have two cameras PointGrey Chameleon I try to access it via the USB port.

  IMAQdx Version 3.9.1

  Point Grey FlyCap2 V 2.3.3.23

  I can get both cameras to execute and return the images to the ActiveX control when I use the ActiveX Interface of PointGrey.  I still have to be able to successfully remove the data from the camera so that I can run LabVIEW vision standard analysis on them. (What I do if I don't want to rewrite my entire application)

  Thus, 1 approach would be for someone who was able to get the data of the image of the ActiveX Interface, please let me know how you did.  I I _am_ able to get a pointer to the data (but then don't know what to do with it), but I'm NOT able to get the data in a table with the GetImageData function.  When calling this function, LV falls in catastrophic failure.

  Neige2 would get IMAQdx to recognize the two cameras, which currently I can't do.  MAX only recognizes one of the cameras on the PC.  I think it has to do with the pilot PointGrey DirectShow records do not cameras on the OS, but I can't find a definitive answer for this on the forums.

  Someone has put experience MAX (and then LV) to recognize two cameras USB Chameleon PointGrey OR type in converting the image pointer that the API Activex PintGrey returns in a LV Image?

  Thank you

  Wes

  OK, the Grey top drivers do not support USB (Directshow) two cameras on a machine at present.

  In addition, there is no easy way to "mount" the image dll PointGrey pointer to an image type of IMAQdx for use in line with the code of vision of NOR.

  My response seems to be to use a second camera by another manufacturer.

  Just thought I'd post this here so that you are all aware of what I found.

  Wes

• I have a video with two cameras, in two pieces. Sometimes only a single camera is running (because t

  I have a video with two cameras, in two pieces. Sometimes only one camera is running (because they both turn off to some lengths of clip). I'm cutting them using the multicamera window, but I get no audio track 2. How can I get audio track 2. (My tinkering is to cut the original sound track 2 and move it to channel 1).

  «To record the audio from the camera selected for the audio track, select Audio video follows in the multiple camera monitor Panel menu.» Deselect this option to record audio from the audio track selected in the source sequence. »

  A quote from the CS5.5 Pr help page "editing multi-camera sequences.

• I want to install two cams hd2200 on one machine

  I have two webcams hd2200 I want on a single machine. The drivers do not seem to stay when two cams exist. Suggestions?

  Ken, welcome to the forum.

  Here's a guide that should help you.  It seems that you need to use a different program with each webcam use at the same time.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• Question about running from two cameras at the same time with MAX

  Hello

  I have two cameras attached to NI PCIe-1430 frame grabber card (Atmel Aviiva M2 CL and Fairchild 2 K LS) IRLS. It's ok when I run two cameras individually, but I can't run them at the same time.

  This is the step that simultaneously run two device:

  1. open MAX, select the port and start image acquisition by pressing the 'Grab' button, I can see the image at this point.

  2. open another MAX session, select the other port and press "enter". I got following error:

  "Error 0xBFF60021".

  Unable to perform request; acquisition in progress'

  Sometimes, I got this error too:

  "Error 0xBFF60022".

  A timeout error occurred while you wait for the specified event. If you expect a picture, check the video data is acquired in the period. If in the meantime the signal, check that the assertion of signal has occurred within the period. »

  I already give enough timeout Fame to the tab settings of Acquisition.

  The MAX version used is 4.5.

  You have an idea on that? Makes simultaneous Imaging MAX support?

  Thank you

  -polarfox

  Thanks for the quick response Bruce.

• I have a SONY Handycam video camera recorder (2005). I have Windows Vista and I am not able to download videos to my PC. What can I do to fix this?

  I have Windows Vista on my PC at home.  I have a 2005-Sony DIgital Handycam video camera recorder.  I have video saved my son and I would download on my PC.  DVD software is not compatible with Windows Vista.  How can I fix?  Any helpful ideas?

  Hello

  see if Sony has a solution to workaround or upgrade to a model compatible vista

• Codec c60 sending two cameras at the Conference

  Hi people, I need your help.

  Our client, we have a codec c60 of cisco and we are facing a problem inside.

  We have two cameras in codec c60. We made a presentation in console software TC to send both cameras at the Conference.

  We have the following entries in the codec:

  source 1 - first camera

  source 2 - secondary camera

  source 3 - pc

  We started the conference without presentation. Everything works fine. Both cameras are sent into the main channel. But when we try to send the presentation. The presentation works fine, but just the first camera is sent to the main channel. The layout does not work! But, if during the Conference, we go to the configuration and set the 'default presentatin source' as' 2". Source 2 is sent as presentation properly and in the mainstem both cameras are set correctly in the Console of TC. It works! The same thing happens if we set source as' the presentation by default"1. But if we define as the source 3 (pc), then presentation works normally, but just the first camera is sent to the main channel again, even if I don't put anything on the main track in Console of TC. The first camera is the "main source by default".

  We tried to change the cables, the pluging the PC in "Source 2" and cable to the secondary camera in "Source 3". But we had the same result. If the 'PC' is the source of presentation, only the first camera is sent to end.

  Can anyone here help me? Please help me.

  If necessary, I can provide the XML file that I use in the TC Console.

  Thank you

  Hello

  Please try again using a pc 16:9 source, because your layout of the TC console is set up for the resolution of pc.

  Let me know if you get what I get when using a PC 16:9 source.

  Sent by Cisco Support technique iPhone App

• Need to find drivers for JVC cam recorder

  Original title: I need to reload my drivers for jvc cam recorder - DR-D270U... Where can I find down load...

  I need to reload my drivers for jvc cam recorder - DR-D270U... Where can I find down load... JVC is not user friendly or free? I just bought a new computer with windows 7. Please advise?

  Hello

  DR-D270U model number is not found in the jvc Web site. Do you mean like GR-D270US model number?

  In the affirmative, then the driver for the 32-bit operating system will install automatically and you do not have to install any additional software to use it.

  It has been found that there is no driver for the 64-bit operating system.

  For assistance and additional information, you can consult the sites listed below:

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=JVC%20GR-D270US%20MiniDV%20Camcorder&v=JVC&uid=GR-D270US&pf=1&pi=3&c=Cameras%20%26%20Photo&sc=Camcorders&os=64-bit.

  http://support.jvc.com/consumer/support/index.jsp.

  I would say as you to see the site mentioned below:

  http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/jvc-gr-d270us-minidv-camcorder-not-compatible-with/61fd20df-6d53-4b07-872f-044e03be394a.

• How much input power required for MX700 with two cameras.

  Hello team

  Can you please give me a detail on the number of power supply input required for a MX700 with dual screen and two cameras. Is - this device is delivered with a POE injector, integrated for the touch-10?

  Concerning

  Nicolas

  You can check the Cisco TelePresence MX700 & MX800 datasheet for detailed information on power requirements.

  I think that the CTS-PWR-AIR-INJ5 power injector - delivered with the system default when ordered.

  See the diagram below. The power injector is supplied with the device to touch 10 and installed as shown below.

  7 png

  

  Kind regards

  Acevirgil

• Editing a shooting of two camera in first 13 items

  I have two video tracks of a session of two camera of a part of the school that I'm editing together into one. I use one as the main video track and the other as a great shot in Cup. I would like to see the two video tracks play simultaneously-by-side at the top of the editing screen so that I can more easily choose which shot to use. How can I get there?

  [Left Pro for first things first... MOD]

  Step 1. Synchronize two videos.

  Move the two videos (from two cameras) in the edit window, select all four titles (two video tracks and two audio tracks) and right-click, then click on "Sync" and select "audio". Then the two videos will be synchronized by their audio. And now, you can cut any part you do not want to appear in the video.

  Step 2. Position the two videos with the PIP effect.

  Under "Effect", click "Presets" and then "PIP" (picture in picture), then "PiPs of 25%", drag he'S (LowerLeft) to the video track that you want the video showing on the left side, this will make what to see the video on the screen, he'S centering to a 25% of the full screen size. The another video track that you want to display on the right side, then drag LR (LowerRight). This will make this see video up on the screen, centering LR to a 25% of the full screen size.

  Step 3. Adjust the size and position of the two videos.

  Click on the video track located on the LL, go to 'Effect Options', click on the "fx Motion", change "25.0" to "50" wide, it will change the video size to half the size of the screen. And then play with the numbers in position adjustment until the video's position in the center of the left size of the screen.

  Then do the same for the other the video track. Click on the video track located on the LR, go to 'Effect Options', click on the "fx Motion", change "25.0" to "50" wide, it will change the video size to half the size of the screen. And then play with the numbers in position adjustment until the video's position in the center of the right size of the screen.

  There you go. Perfectly synchronized and placed side by side.

• I get two of my two cameras difrent color temperature values

  I own a D800 and D810 an and I'll put in values for color temperature of 5 600 K on both devices. I save my photos in RAW files.

  Lightroom is for D800 shots 5 400 K and 6 000 K for the D810 display.

  Renderings for two images from cameras are very, but if I change the temperature of color in an image and Synchronize color in pictures of two temperature settings cameras I get different results: some images are warmer or colder.

  
  

  So if I'm shooting with the same parameters of K in the two cameras, why are the numbers of K in Lightroom different from each other? This makes my workflow very difficult.

  
  

  Thank you in advance for a solution.

  
  

  
  

  Best regards

  
  

  
  

  Luis

  fukujitso wrote:

  The renderings for the two images from cameras are very, but if I change the temperature of color in an image and synchronize images from two cameras color temperature settings I get different results: some images are warmer or colder.

  The best way to make this type of correction is with Panel to develop fast in the library module. This allows a change in the 'relative' (+ 500 K Temp for example) to a group of images with the same lighting conditions. Jump to the 03:30 minute point in this video tutorial:

  Quickly develop "Julieanne Kost's Blog

  You can also add your vote for this application "preset" ability in the develop module:

  https://feedback.Photoshop.com/photoshop_family/topics/relative_presets_would_save_the_day

• In a with two cameras a multicamera edit does not appear in the multicam monitor?

  In a multicamera CS 6 with two cameras one Assembly does not appear in the multicam monitor or rather remains black while it is present in the sequence? Is this due to lack of memory of the CPU? I have a Toshiba Tecra i5

  Thanks if anyone knows why?

  [email removed by Moderator]

  I use Adobe CS6 first

• two camera entrance, showing the language

  Hi all ^_^
  I have two questions, one
  I had a show on a local television with a male character and it works great but now the producer want to kill me with the other character, now it's 'man and woman' to do a talk show for children-_ - im asking how can I input multi cam so I can move my character two with two cameras and two persons acting for the stage with two
  and how do I synchronize lips

  the other
  It's a funny show so some time actor some time show his tongue can I add language efforts to the mouth in the Illustrator file?

  Thanks ^_^

  > How do I input multi cam so I can move my character two with two cameras and two persons acting for the stage

  Ch can follow only a face at once, so for live production, it can maintain only a single character. But with two computers, each running HP, you could produce two characters live. Then you need to use a software like Wirecast of Telestream screen - scrape the results and disseminate on a third computer where you combine them, maybe with an another Wirecast? Not sure he can do it, but people from Telestream can tell you.

  > It's a funny show so some time actor some time show his language can I add language efforts to the mouth in the Illustrator file?

  The simple way is just to add an extra mouth with the tongue out and give it key elements of (name of the layer as "TongueOut (T)!"). Press and hold the T, when you want to see the language.

  If you want to keep the language hanging out while you talk, you would need two sets of visemes (i.e. two groups of mouth), and then you would trigger the Group whole language-mouth with a touch of the same way. It's more complicated, however, you need to apply a synchronization of the lips and face additional behavior to the Group of extra mouth.

  The next version of preview (3) will let you just press the trigger key and do not have to hold it down.