WVC80N success of Remoting is not consistent

Hello

I have access to my camera to all remote locations.  One of my friends who has the same ISP as me can access.  I can access from my iPhone (connected via 3G).  But my sister and another friend can't access it (they do not have the same ISP as me).  After my sister typing the URL affected, her browser sends him just to ASK.com or google.com.  I have the settings on 80 and alternatively on 8080 of my router port forwarding.

Before you configure the router on the other port to 8080, I tried to work and the port by default of 1024, at this time, does not connect successfully.

Is this a problem with my ISP?

TIA,

Joe

Steps for successful remote viewing:

1. make sure that the WAN IP address is valid.  You can check this by directly entering the numeric IP address. i.e. http://xx.xxx.xxx.xxx:yyyy, where yyyy is your port number.

2. make sure that the modem firewall settings allows viewing distance.  Call your service provider to perform this step.

3. make sure that Web Port for the replacement of the camera is turned on and note the port number.

4. make sure the monkey Port or Port Range forwarding router matches port numbers replacing Web Port unit number and active.

5. make sure that your type of users at the address correctly. That is to say http://domain_name.dns_provier.com, no www.

I think it is, enjoy!

Tags: Linksys Products

Similar Questions

  • My remote does not work - suggestions?

    I can't get my apple remote to work.  The apple airplay works, but the 4th generation remote does not respond.  Any suggestions on how to open it to check a battery or solve problems?

    Welcome to the Apple community.

    1. Have you tried reloading the remote control. (do not attempt to open, it has a rechargeable battery, opening may void your warranty)
    2. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
    3. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
    4. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
    5. If you have tried all of these steps, is not a distance sooner or a USB - C cable or using them is too inconvenient, return to the store where it was purchased for a replacement.
  • My Apple remote is not connect to HDM2; It says no signal.

    My Apple remote is not connect to HDM2; It says no signal.

    Here's info ID that model ATV we process: identify your model of Apple TV - Apple Support

    Post a picture of your problem and describe your configuration.  Is this the first time used or made it work and suddenly stop working?

  • Scrambled screen & colors is not consistent on satellite M40X-230

    Hi, I have a M40X-230, a few weeks ago, I started to see a garbled screen where colours were not consistent and the screen looked as if she was chopped vertically in 3 and all three parts were in and out of the other mixture.

    It lasted about 10-15 minutes and he persisted through reboot. However, this would not happen whenever the machine has been used. After another week or so when the machine is started, even the Toshiba splash screen is cut as described above, this continues when the config in the BIOS (press F12 at startup).

    The machine is able to boot in safe mode, but the same problem occurs and when an external monitor is attached the problem is visible on the attached screen as well.

    Anyone seen this before? All the tips, I think it's my graphics card or perhaps the LCD, but really not sure.

    salleyne

    Hi mate,

    This sounds like a hardware malfunction cleary. If you already have the symptoms to the toshiba logo, then I would recommend you to contact emergency an ASP for a checkup of material because this error cannot be resolved with an update of the bios/software.

    Visit this link for the nearest availabel ASP in your country:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Good luck and good weekend

  • Paired Remote App not recording not peel after restart of Apple TV 4

    Paired Remote App not recording not peel after that Apple TV 4 is restarted.

    I have paired a remote with Apple TV 4, but that pairing is not saved after I power cycle the Apple TV 4. I checked with an Apple TV 2 and it stores the remote pairing when it is the power to bike.

    Y at - it a setting or something I missed? Or is this a problem with the current software on the Apple TV 4?

    Thank you

    -Jeremy

    Oh, it's working now. It was a problem with the device I have matching and not the Apple TV 4. Disregard this message.

  • Apple tv remote trackpad not work-low battery

    I created my new 4th generation Apple TV out of the box using the remote control. Everything was fine with the remote control.

    Then, two hours later, when I went to use the remote control it would not work. The apple TV was ok with my iPhone remotely. I realized that the battery was low. is this normal with a new right distance out of the box. I now have it on royalties for the recommended 9 hours.

    I now note, while the load and rate reduced the trackpad on the remote does not respond to my fingers to scroll up and down, but will respond to clicks.

    Is this normal for a low battery indicator?  I hope so. I will update post to 9 hours.

    The remote control will not be loaded completely out of the box, it is always a good idea to completely load the devices before using for the first time.

  • I'm trying to close my account msn without success. I do not have a paid subscription, but it tells me that I do,

    I'm trying to close my account msn without success. I do not have a paid subscription, but it tells me that I do,

    How does this relate to the features of Windows Update?

    See...

    How to contact MSN customer service
        http://support.Microsoft.com/kb/940784

  • Private DB link does not not present despite entry TNS pattern gives ORA-02019: Description of the connection to remote database not found

    Hi DBAs,

    I have created a new schema and granted create database link and create databases of public link privileges.

    After that I created the link private DB for which TNS entry is present in TNSNAMES.ora but everything by testing the link, I get the error:

    ' ORA-02019: Description of the connection to the remote database not found. '

    Kind regards

    Ritz

    Try using:

    CREATE the DATABASE LINK "VENUS.ritz.ac.uk".

    CONNECT TO 'VENUSREADONLY' IDENTIFIED BY 'FLAMING0READ0NLY' WITH THE HELP OF "VENUS."

    Your dblink seem to give the entry not TNS service name.

    Kind regards

    --

    Bertrand

    PS you have to hide people with disabilities before posting.

  • How do I register a very old acrobat from adobe and then download the upgrade? It seems that the serial number is not consistent with the serial number required by the adobe Web site. My serial number starts with the letter instead numbers.

    How do I register a very old acrobat from adobe and then download the upgrade? It seems that the serial number is not consistent with the serial number required by the adobe Web site. My serial number starts with the letter instead numbers.

    Please see:

    Redeem your student and teacher edition purchase, convert a redemption code to a number of series and much more .

    I hope this helps.

    Concerning

    Megha Rawat

  • description of the remote DB not found connection

    HII
    I have 2 database in my system (ORDB, ORCL)
    I tried to run under instruction of 'ordb' sql database command


    SQL > desc [email protected]
    ERROR:
    ORA-02019: description of the connection to the remote database not found

    Thank you

    10.2.0
    Win 7 proffesional

    Published by: O0O0O0O0O on March 7, 2013 15:08

    I have accepted that I'm going to need a DB link , but my question now is - why above the command doesn't have the DBLINK to gain access to another DB?

    SQLPlus command 'COPY' use connect identifiers, not the db links.

  • Affinity - cluster rules is not consistent, but not enabled

    When you view the cluster tab, it says a rule of affinity is NOT consistent, but he was not active anyway, so is it to show in red as a warning seems incorrect.

    I don't know what would be the solution, because it is true that it is not consistent. It is only fair, I worry in this regard that the rule is not enabled.

    With the help of 4.1.9.

    Good good script. Love that is work.

    The API documentation, it seems that this property is not currently used today - http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/vim.cluster.RuleInfo.html

    Because the property is a Boolean value and provided by the system, I print only what it provides. I think that this was asked awhile back and it can be ignored for now until VMware appealed to the property.

  • Writing batch files is not consistent.

    Hello

    Could you explain why file written behaving like this batch:

    http://lksoablogs.blogspot.com/2012/01/file-write-in-batches-is-not-consistent.html

    Thank you.

    It's super easy to explain...

    the inbound adapter reads two lines and sends a message that contains these two lines...
    the outgoing adapter expects two messages to write to a file... so 2 messages * 2 lines per message? 4 lines...

    e round is played.

  • ORA-02019: description of the connection to the remote database not found

    Hi all

    10.2.0.4 on solaris 10.

    I can tnsping and connect to a tnsentry in tnsnames.ora from the server, but when I use the same in dblink, get the error below:
    ORA-02019: description of the connection to the remote database not found. Here's the scenario. any idea?
    medt01:medtora:/medt/oracle/product/102/network/admin$ tnsping medcon
    
    TNS Ping Utility for Solaris: Version 10.2.0.4.0 - Production on 09-NOV-2011 23:49:23
    
    Copyright (c) 1997,  2007, Oracle.  All rights reserved.
    
    Used parameter files:
    /medt/oracle/product/102/network/admin/sqlnet.ora
    
    
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))
    OK (20 msec)
    medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/[email protected]
    
    SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 9 23:49:31 2011
    
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    
    
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    
    SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/[email protected]
    
    SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 9 23:59:54 2011
    
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    
    
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    
    SQL> exit
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    medt01:medtora:/medt/oracle/product/102/network/admin$ tnsping medcon
    
    TNS Ping Utility for Solaris: Version 10.2.0.4.0 - Production on 10-NOV-2011 00:00:02
    
    Copyright (c) 1997,  2007, Oracle.  All rights reserved.
    
    Used parameter files:
    /medt/oracle/product/102/network/admin/sqlnet.ora
    
    
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))
    OK (0 msec)
    medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/[email protected]
    
    SQL*Plus: Release 10.2.0.4.0 - Production on Thu Nov 10 00:00:07 2011
    
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    
    
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    
    SQL> exit
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medc_pl/medxcdsw3
    
    SQL*Plus: Release 10.2.0.4.0 - Production on Thu Nov 10 00:00:17 2011
    
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    
    
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, Real Application Clusters, OLAP, Data Mining
    and Real Application Testing options
    
    SQL> create database link med2con connect to medts_ed identified by medfcv using  'medcon' ;
    
    Database link created.
    
    SQL> select * from [email protected];
    select * from [email protected]
                                *
    ERROR at line 1:
    ORA-02019: connection description for remote database not found

    Try this,

    SQL > create database link med2con connect to medts_ed identified by using medfcv ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))';

    SQL > select * from [email protected];

  • My Variable is not consistent when called outside the Group

    Dear all,


    I stored a variable that was within the group as follows:
    <? for-each-group: MarketingFundTransferOut; / FromFundId? >
    <? sorting: current-group () / FromFundId; ' ascending '; data-type = "text"? >
    <? sum (ATTRIB_01 [.! = "])? >
    <? xdoxslt:set_variable ($_XDOCTX, 'INIT3', xdoxslt:to_number (sum (ATTRIB_01 [.! = "])))? >-> store for the variable INIT3
    <? end for each group -? >


    and he asked outside the group with these:

    <? xdoxslt:to_number(xdoxslt:get_variable($_XDOCTX,'INIT3'))? >


    Sometimes the true result and sometimes the wrong result (non-compliant)

    Here is the example of one is not consistent:

    1.2 regular TV
    In Total total
    10 0 10 (I've posted the out) 10 (I've posted the in)

    Does anyone have an idea to solve this problem? It will be highly appreciated


    Best regards
    TSE

    You can initialize this variable before this group, so that it does not have the previous value of groups

  • Problem of time zone: time zone is not consistent

    Problem of time zone: time zone is not consistent
    From sqlplus, the time is displayed:
    SQL> SELECT SYSDATE FROM DUAL;
    
    SYSDATE
    --------
    09-11-11
    from the Windows command line tool:
    D:\coherence\lib>DATE
    The current date is: 11/11/2009
    Enter the new date: (dd-mm-yy)
    But from the Control Panel, it shows at the present time is 10:40.
    For this reason, a database of programs don normally work.

    There are two ways that you could do.
    Track 1:
    Search for a file by the name "glogin.sql" on your client workstation and add the following statement

    alter session set nls_date_format = 'YYYY-MM-DD HH24:MI:SS';
    

    Make sure that you save the file. This change will apply to all users who will connect to the database using SQL * PLUS to your machine.

    Track 2:
    Create a shortcut and place it somewhere (for example on the "DESKTOP").
    Right-click on the shortcut and choose Properties.
    The text corresponding to the box 'Start' to reflect the current location of the shortcut.
    Create a file by the name "login.sql" and place it in the same folder that the shortcut.
    Edit the file and add the following line.

    alter session set nls_date_format = 'YYYY-MM-DD HH24:MI:SS';
    

    Make sure that you save the file.
    When you double-click the shortcut to launch SQL * more and opening of the session, the "login.sql" script is executed.

Maybe you are looking for