WY is Adblock works more

In the last weekj, these heinous incorporated started ads popping up most Web pages. Anyone have any ideas for what is bad adblock?

Hello, this looks like a problem maybe caused by adware that is active on your pc.

Please go to the firefox menu

> addons > extensions and remove any suspicious entries (toolbars, the things that you have not installed intentionally, I don't know what purpose they serve, etc.).

also go to Control Panel / programs and remove all toolbars or potentially unwanted software from there.

Finally, run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner.

Remove a toolbar that has supported your Firefox or the homepage search
Fix Firefox problems caused by malicious software

Tags: Firefox

Similar Questions

  • Problem with adblocker working on reboot & recording is not some prefs.

    First issue: Adblocker works fine when first installed. Then if FF is closed and reopened it SAYS it is enabled, but it does nothing. I have to go to the addon menu to disable and enable it to make it work again, when it works fine. It's really annoying, having to do that. Some comes with FF not anti-ad.

    Second: FF won't save preferences involving a "do not show this message again" ticking box, i.e. with the closure of several tabs, browsers private, etc. All other prefs to record properly. And Yes, I read the FF won't save prefs section and tried all this; l it does not work.

    If you don't keep changes after a reboot then see:

    Create a new profile as a test to see if your profile is the source of the problems.

    See "create a profile":

    If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • Qosmio F50 - the fan works more often?

    Hello

    I installed the display driver Windows 7 32 bit in 32 bit Vista and it worked almost fine except that the fan works for shorter time compared to when Vista 32-bit driver is installed.

    Is there a way to make the fan work more often or always while aware that the driver 32-bit Windows 7 is much better, but increases the temperature of the laptop?

    Thank you

    Hey

    The activity of the fan will be controlled automatically and there is no value that you can change. All you can do is to change the cooling method in Windows power management. For each level of power, you can change between maximum performance and battery optimized. If you choose a maximum performance of the activity of the fan will be higher.

    But not don t. Important worry is that you have installed the Toshiba display driver and if your laptop overheats it would must down to protect the equipment.

  • Satellite A135-S4527 cooling fan works more efficiently

    Hello

    I have an A135-S4527 and the cooling fan is having issues.
    It works at low speed constantly, as it usually does, but almost never, he runs in mode high speed.
    Clearly, it must be that the air temperature is high enough... about the temperature of the exhaust gases from the typical vehicle.

    I'm worried that it will burn upwards if I have not fixed, but I don't know what needs to be fixed.
    I use a "Chill Pad" USB power under him at all times to make it work more fresh than the factory settings, but this problem has arisen only recently.

    I've owned this computer from a little less than two years now.
    5 months in the property, the HARD drive failed and had to be replaced (it goes without saying, I save ALL my important files now).

    Does anyone have information on this topic or the normal functioning of the cooling fan?
    If so, it would be greatly appreciated.

    Nick

    Hello!

    As Akuma, it could be that it takes more dust in the cooling fans or fan doesn t work properly.
    So in your case, I'll try to clean first using a jet of compressed air. This could blow out the dust from the cooling fans. You can buy it at a computer retailer.

    If it doesn't work you should sent to an authorized service provider. Technicians can check your laptop and clean.
    Maybe the thermal compound must be renewed and technicians can do for you. It of a little more difficult to disassemble a computer laptop and you need to remove a large number of screws so he sent to an ASP.

    Good bye

  • I have a Canon 32-bit multifunction printer that worked with my old laptop. Again 64-bit works more computer portable printer nsns, what I can do.

    • I have a Canon 32-bit multifunction printer that worked with my old laptop. Again 64-bit works more computer portable printer nsns, what I can do.

    Hello

    Go to the Canon Website and search for your current operating system 64 bit printer drivers.

    If none are available, it may be time to upgrade your printer.

    See you soon.

  • My headset doesn't work more than one second to another second

    Hello world

    My headset doesn't work more than one second to another second

    I was talking with my friend, everything was fine but I started eating and I turned off the microphone with the switch based cable.

    My friend asked him something, I wanted to answer then I switched back on it. We did this several times, but after 4-5. marketing, he was not able to hear me more. I tried with other micro there must be something with my pc (del or related more difficult)

    I tried everything already, even downloaded the MicrosoftFixitAudioRecording.RNP.Run.exe. I ran, but could not solve the problem.

    He said that "the Audio recording device is disconnected.

    However his trendy ofc, but anyway his doesn't...

    Can someone help me please?

    My partners can not hear me, so I just had the problem with the microphone part. The headphone speakers works well.

    All the drivers are up to date. The computer is new (~ 2.5 months)

    I run Windows 7 64 bit

    Hardver specifications I can add later if his need.

    Thanks for any help in advance. Best regards; Rizkay

    PS. : sry for my bad English

    Hi Rizkay,

    Thanks for posting your query on the Microsoft Community.

    According to the description, I understand that this headset stopped working.

    There may be a hardware conflict.

    I suggest to try the steps in the Microsoft Help Article below and check if that helps.

    http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-7

    You can view the help on the question below link
    Connect a microphone music player or other audio to your computer device -
    http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • I can't get FSX gold edition to work more than 10 seconds!

    I can't edition FSX gold to work more than 10 seconds before the crash of the software. I reinstalled several times, even the demo we do the same thing! I get a message 'not compatible '. I tried all the settings in the compatibiliy box (inc by checking the box of the administrator), my system is Windows 7 home eI get FSX gold edition to work more than 10seconds before the crash of the software. I reinstalled several times, even the demo we do the same thing! I get a message 'not compatible '. I tried all settings in the box of compatibiliy (inc by checking the box of the administrator), my system is Windows 7 edition 64 family. the chip is an i5 3470 running at 3.2 GHz, 8 GB Ram, 1 TB hard drive card graph NVIDIA Gt650.

    Load FSX OK, but when it blocks it seems to block all e PC upwards. The answers would be welcome

    Hello

    FSX is very demanding in graphic design, it could be the laptop graphics card can not handle.

    As a work around you are trying to update the graphics card drivers is available from Nvidia.

    What is the source of the installation of the game? What is a downloaded file or CD?

    However, the question you posted would be better suited in the support of Microsoft Flight Simulator since we have a dedicated support for this; We offer that will also post your query using Flight Simulator for assistance:

    http://support.Microsoft.com/GP/games-for-Windows

    http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

    Please report if you need assistance on issues related to Windows.

  • I probed to "Always allow", "allow once" or "Block" for an incoming program. I accidentally click "block" and my program worked more! Please explain how I can allow the program to work again?

    I was probed to always select "allow", "allow once" or "Block" for an incoming program. I accidentally click "block" and my program worked more! Please explain how I can allow the program to work again?

    How can I reverse the error?
    Concerning
    JollyJ

    Without doubt blocked by any firewall you have installed, that being the review of the cases of your firewall settings that relate to this program

  • My utude works more asking for flash player that I already used let me down load new

    My utude works more asking for flash player that I already used let me down load new

    It works now

    Ms

  • Hello. I bought Lightroom, paid license 1 year view, did not have serial. E number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

    Hello. I bought Lightroom, paid license 1 year view, did not have serial. And number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

    Hi Sergior96769872,

    I saw your Adobe ID (email address), you used to post on the forums, and I see an active subscription on it.

    Please see Help below links: { make sure you use the same Adobe ID (email address) that you used to purchase the subscription }

    Connect and disconnect activate Cloud Creative applications

    Adobe Creative Cloud apps back in test mode after 2015 set CC to update

    * NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it can just disable the firewall for a while and then log off and log on creative application of cloud and check.

    If it still gives you an error of the trial, then please refer to the troubleshooting listed below:

    If you are using MAC:

    1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

    • Creative cloud
    • Basic timing & sync to basic support
    • CC library & process CCX
    • Adobe Common Desktop
    • Adobe update daemon
    • Broker CIB Adobe
    • After that, everything that said adobe on it do a force quit for her

    2 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

    ~/Library (it will open the folder of the user's library.)

    3. browse to the Application Support > Adobe > trash OOBE folder and folder AAM Updater

    4 - CUT any installed security software with firewall system.

    5 - go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

    These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

    6 - restart the cloud creative app and connect


    If you use the WINDOW:

    1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

    • Creative cloud
    • Basic timing & sync to basic support
    • CC library & process CCX
    • Adobe Common Desktop
    • Adobe update daemon
    • Broker CIB Adobe
    • After that, everything that said adobe on it do a force quit for her

    2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

    3 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

    These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

    4 - raise the cloud creative app and connect

    Let us know if that helps.

  • Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How can I uninstall the programs of the

    Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How do I uninstall the programs of the broken laptop and not running before installing on a new? Sincere friendships Fabian

    Hello

    If you have access to the machine, turn off Adobe CC applications by the signature of the application.

    Please see connect and disconnect to activate Cloud Creative applications

    Kind regards

    Sheena

  • After upgrading to fusion 6 ungrab the keyboard work more systematically.

    After upgrading to fusion 6 ungrab the keyboard work more systematically. About 80% of the time its not possible is the virtual machine using cnontrol-cmd ungrab. stop the virtual machine is the only want to regain control of the keyboard. All of the suggestions.

    Fixed it myself... Reinstall the tools VMware has not helped, I was using a wireless to imac keyboard, I tried to disable the usb and bluetooth sharing with windows from Fusion settings.

  • Pen pressure simulation doesn´t work more.

    Hi everyone, my pen pressure simulation doesn´t works more. I am a pc user and have cs6 extended 64 bit a a wacom cintiq 21ux with the latest drivers. By clicking on the route of the path, the path have all the same thickness. But it should be thin at the beginning of the end. Can someone help me, please?

    In the dialog box the way you check simulate pressure and in the brush Panel under dynamic form > size Jitter > control you have selected the pen pressure ?

    You don't need a tablet of pressure for the above operation.

  • My hard drive crashed, I have lightroom 5, where can I download it again t re install. ADOBE email, I've had has links that don't work more (thanks for that). Running Windows 7 Home Premium

    My hard drive crashed, I have 5 Lightroom, where can I download it again t re install. ADOBE email, I've had has links that don't work more (thanks for that). Running Windows 7 Home Premium

    Hello Andrea,

    have you tried this: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=DT EML

    Regarding your eMail, you should be talking to Adobe, please take a look here: http://helpx.adobe.com/de/contact.html clicking throug their questions and so "open" Please use the cat, I had the best experiences.

    Hans-Günter

  • A command doesn't seem to work more

    With the help of as a shortcut for 'select all' doesn't seem to work more

    Agggghhhh... apparently there was an update, and I had to restart T/B. That seems to have fixed.

Maybe you are looking for

  • Erase the data on the iPhone

    I activated "Erase data after 10 failed attempts" on my iPhone but I want to limit the number of attempts for just 4 or 5.  How can I do?

  • JOINT error message

    someone has an idea of what the error message says when you run a command to SHOW the IP TRAFFIC on a METHOD? (Im connected like ciscoids and IDSMk9-sig 3.0 - 5 - S33) "idsm2 # show ip traff. Monitor statistics Interface: "Error: no sufficient privil

  • Drive hard Canon VIXIA HG10 camcorder 10 x

    No driver available for Canon VIXIA HG10 10 x drive hard camcorder on two versions of Windows 7 (32-bit or 64-bit).

  • Adobe dot Com resource who say free, but are not...

    I was updating my Muse sites today and I clicked on several 'free stuff' that to go to a 3rd party website that doesn't let you download without membership and pay money to do... I don't have a problem with that, except for the part that says on the

  • Lightroom CC 2015.2.1 D800 import slow with attached USB cable

    HelloWhen I join the MacBook Pro retina the D800 with a cable USB 3 (various) (end of 2012), not all images are displayed in the import dialog, and if all images are marked for import and import is started, nothing happens. When I do not start the im