X100e multiple views

Is there a method to connect 2 monitors to a x100e?

The best thing is most likely a Matrox DualHead2Go external solution.

http://www.Matrox.com/graphics/en/products/GXM/dh2go/

Tags: ThinkPad Notebooks

Similar Questions

  • Incorporation of goods for multiple views

    I am developing a game for the playbook, and I'm not sure of the proper way to integrate images that will be used in multiple views in the game. I realize that if I put a tag embed for photos in each of the views that it will increase the size of the app. Right now I have all my belongings in an actionscript file, and this file is referenced by each display mode using the asset.

    To clarify, each view has the reference:

    <>cript source = "images.as" / >

    In images.as are each photo included such as:

    [Embed(source="assets/pic.jpg")]

    [Bindable]

    public var pic1: Class

    What is the right way to integrate these images?

    Any help would be greatly appreciated. Thank you.

    I was told many years ago that if the same resource is incorporated several times, it would be a copy of it in the final SWF file. It would be easy enough to check.

  • How activate you multiple views using windows 7

    I have karaoke on my laptop using windows 7.  I can't get multiple views to put words on the TV screen. How can I do?

    Elsie

    Have you tried to win (windows) + 'P '?

  • Create multiple view ingres column definition table

    I start here in this forum because I don't know where this problem is better managed.

    I use an Ingres database using heterogeneous services. I create a view on Ingres in an array of Ingres.
    so I issue a create in select table * view Ingres to create an oracle table in the oracle system.

    It works, but when I look at the definition of the column, they are created with a multiple of 3. for example,.

    varchar (5) will become a varchar2 (15)... when I use enterprise manager to view the oracle table.

    Yes, Ingres has the column as a varchar, then oracle it translates varchar2. I use Oracle Rel 11Rel 2.
    and Ingres is old version 2.0.

    The view created on the side of Ingres is correct... but once I create a table in the view that this column
    definitions of change. BTW... I tried this without notice and oracle continues to increase the size of 3.

    Any ideas as to why this is happening and how to stop it?

    Thank you.




    I did a search on the NLS_parameters... I use AL32UTF8.

    When I'm in SQLPLUS and make a remote table desc...

    / / DESC remote_table@HSLINK > > > > HSLINK is the name of ODBC db link connection.

    I get the fields like ID Varchar2 (45)...

    When I view it at Ingres, using Visual DBA... it's ID Varchar (15)

    Published by: sgonos on July 8, 2010 07:24

    main cause is the Oracle database character set. The Oracle database does not know which character set your foreign database uses. In the worst case scenario it may happen, the character abroad datababase contains unicode data and requires 3 bytes. The gateway works in byte mode and therefore the accuracy of the foreign database is triple.

    At 11.2 most gateways are used to define the parameter HS_KEEP_REMOTE_COLUMN_SIZE, which prevents the precision of the column increase.

  • How can I get updates in real time in multiple views when scrubbing through the timeline?

    I use After Effects CS 5.5 on Windows 7. When I use the mouse to click / drag / scroll the timeline, a real-time updated view, it's great! If I open a second point of view, it does update this notice when I finished the scrolling.

    I would like to be able to scroll back the timeline and update in real-time (live update) has two different compositions?

    Is this possible?

    Thank you!

    The long answer is: No. it isn't even a matter of performance, this is how AE evaluates the time, because the time is fluid and can be truncated to 1 million ways to time remapping to expressions...

    Mylenium

  • Need advice on the multiple view batteries

    In my current application, I have my battery from main view displays 2 components - and intro and a step 1.

    In step 1, the user will decide on 1 of the 2 different projects, and then I want the battery to "freshen up" with only the steps of the selected project.

    By example, if 'make a birdhouse' and 'do a table' was the choice, if the user chooses the cabin the app appears now only steps from the birdhouse tutorial.

    I'm singing 3 XML files with the data of the intro and one each for each of the tutorials. I load the first and according to the choice to load the other appropriate.

    Would be better dealt with States, or should I assign different values to the stack view, or what?

    Thank you.

    Sure.

    Let's say you have your 2 initial ViewStack children:




    Step 2 you have a custom event, tutorial. When this event is raised, it has the information which the steps must be created then.

    private function changeTutorial (event: TutorialEvent): void
    {
    First remove the two original steps
    stack.removeChild (step1);
    stack.removeChild (step2);

    now, you determine which steps to add, and then add them:

    var: step = new Step();
    stack.addChild (step);
    }

    In other words, use stack.removeChild (component) and stack.addChild (component);

  • creation of multiple view script

    Is it possible to create 1 script create seen too many such as:
    CREATE or REPLACE VIEW sale_sched AS
       SELECT *
         FROM table_1
        WHERE bogus = 'yes'
    commit;
    /
          
    CREATE or REPLACE VIEW sale_sched AS
       SELECT *
         FROM table_2
        WHERE bogus = 'yes'
    commit;
    /
    
    CREATE or REPLACE VIEW sale_sched AS
       SELECT *
         FROM table_3
        WHERE bogus = 'yes'
    commit;
    /
    the above code is wrong, I am using Toad and want to just have run 1 script in the Task Scheduler.

    Thank you
    Rich

    Hello
    Use the above code I showed.
    Just copy paste the immediate execution and plug your selection...

    Any question?

    All different views view so different names of course ;)
    You can also remove the views in the same way.

    Kind regards
    Bobin

  • Dock included A7E34AA and multiple views

    Sorry if I ask you something that does not exist in the documentation, but somehow I can't find it now.

    When the laptop (in this case 8770w, i5, over-pants M4000, win7 pro) is on the dock, digital (DVI and DisplayPort) ports are intended for a single monitor, right? Which means one can not connect a DVI monitor and another DP in extended desktop mode?

    To connect two monitors of the docking station to use DVI or DP for a monitor and RGB for another?

    I think I've seen cela somewhere but I'm not sure.

    I ask this because I am familiar with A7E38AA advanced with A7E34AA (Basic) and no docking station.

    Can we confirm this or tell me if I'm wrong,

    Thank you in advance,
    Momir
    ARS media

    Hi momirz,

    Im sure that this Document will help you

    http://webshop.it-total.se/PDF/4457F553-83E0-4C05-B4EE-04108D0804A9.PDF

    I guess that the implementation is as follows: -.

    NOTE: A maximum of three screens can be supported by the 2012 HP 120W Advanced Docking
    Station (A7E36AA) and 2012 HP 230W Advanced Docking Station (A7E38AA). The DisplayPort and DVI
    connectors are shared, so you can choose a DisplayPort or DVI plus a second DisplayPort or DVI liked
    the VGA connector. Therefore, the choices are DP + DP + VGA, VGA + DVI + DP, DP + DVI + VGA or DVI + DVI + VGA.

    It may be useful

    Concerning

    PraTH_KR

  • How and where to cut my screnn for multiple views?

    I know you can do it on Windows 7. Only, I don't know how. Thank you.

    Hello

    Check the following suggestions and if you can split the screen.

    1. open the first application.

    2. to ensure that it is not maximized.  It is considered to be maximized if the application takes up the entire screen and you can't see any part of the office.  If it IS a maximized, click the Center button (square, blue highlight) in the upper right window of the application.  It will grow smaller and you will be able to see the desktop around it.

    3. now, move your mouse to the top of the window title bar, click the mouse and drag the window to the left edge of the screen.  Keep, drag until the mouse reaches the edge and see you the outline of the window to jump to the center of the screen.  Let the mouse upwards.  The application will now sized to fill in only half of the screen.

    4. Repeat steps 1 and 2 with the second request.

    5 drag, as in step 3, but this time to the right of the screen.

    Voila, two windows tiled side by side on your screen.  You can drag the edge again and they return to their original shape and their size.

    I hope this helps!

  • Several views Vs multiple Analyses

    Hello

    I design dashboard 21 boards that share the same columns (columns 22). Each dashboard contains Analyses of 5-10 (each analysis using 2-4 columns), which are from the same columns.

    Currently, they created the only analysis and derived from multiple views, each view, we used only 2-4 columns and excluding the remaining columns.

    We use the line charts, Bar charts, selector display and table views.

    Is that a better performance to use only single analysis and several views? or by using individual analysis?

    Our database has less amount of data, support of size for the full load, it will take 2 hours.

    Raineau

    An analysis with multiple views is a better approach that the query only a single keystroke data.

    Please check if correct/useful.

  • Problem with the extended help display option for multiple displays.

    I have a laptop with an internal (#1) designated as my screen main screen. At work, I like to use the 'extended display' option for several screens to use the external desktop as #2 display monitor. However, at home I have the screen internal one on my laptop. So when I open an application like Excel at home, the window does not appear, but the application is running, as I confirmed with the Task Manager. So far, the only way I know to solve this problem at home is to change my display settings for multiple views to show on display #1 only. Is there a practical way to deal with this issue in addition to change the display settings whenever I move from work to home and vice versa?

    Hello

    In Windows 7, you can simply press the Windows Logo + P key.

    In the menu, select the item from the computer only .

    Concerning

  • 5 displays perform very well - notice of 5 views running at all

    I have 5 'small' views that run very well - they return all the lines (a few hundred to a few thousand) in just a few seconds. They have all the same 3 exact fields that in the view 1 should be the PK if it were a table. View #6 brings together the other 5 on these fields with left join syntax (some points of view have not all possible combinations, while others have multiple matches). Due to the multiple matches in some of the views, the large result set has a fairly high level of duplication in some columns, but we're OK with that.

    The problem is that view #6 for all practical purposes does not nothing. He's right there. A small test batch ran for several days before we dropped on it. I know that complex views (views) to honor not always advice but we tried some anyway. parallel and hash join.

    Experience to materialise the 5 point view to see return 6 results (and exactly as we want) in a few seconds! Unfortunately we are not allowed to use the materialization without too much red tape option that is not valid. The plan view on display indicates joins to nested loops between the 5 while the materialized view on shows hash joins, so the use of the indicator of hash join attempted nothing helps. But the difference of the join method does not seem to explain it.

    We went in a another way of getting the data is attached to the need, but there are some debates and the curiosity to see if it is one approach valid. Everyone knows something like that? Is a view of multiple views, a bad idea?
  • Is it possible to add a small image to view from the list of the press article?

    Hello

    I would like to ask a small image next to the link for my ad on my homepage - www.sunnysideinstantlawn.com.au - is it possible?

    Thank you

    Tammy

    Using the function of the news of the scrap and build your news with the web application instead.

    You can have multiple views of different lists, you can have a custom field multiline text box short introduction, title, date of the course and your image. With this, you can retrieve the value only of an image with the _value option in the image tag.

    You can then thumbnails of BC have only one large image and then small image from your listing.

    You have the detail view friendly of complete SEO for the web application as well as for the full article.

    You can do a lot, it's just how you feel you want and what you do with the installation and layout of it. Much better than the news Module

  • Issue of view composer

    What will happen if my Virtual Center server dies and there View Composer on that? I'm not worried about the VC, but most customers of the view will not be able to connect to their VM because View Composer is down. Is this true? Thank you

    Not exactly...

    View Composer is a service that is used by View Manager only during the creation and deployment of Virtual Center linked clone desktops. After this, View Manager is a component that manages connections user to virtual desktops. You can have more than one View Manager server (replica server) to manage the traffic of users. In fact, multiple View Manager servers can work behind a load-balancing solution (WLBS MS for example).

    I have not tried, but you might have your VC + services View Composer down and still be able to connect to (created previously) virtual desktop pools managed by View Manager server/servers.

    --

    Pozdrawiam/Best looks

    Andrzej

  • Views of States, of memory and unloading

    I'm having a hard time to understand some basic concepts. The Flex app I am building is quite large with multiple views, forms, etc.

    Currently, I have the main sections of my app in about 10 views in a view stack. Each of these views/containers can have several States. My understanding is that the objects in these views and reports are created on demand, which is nice, but how the hell i UNLOAD their?
    It seems to me that the default behavior will continue loading and * maintenance * all these views and States in memory indefinitely until potentially all aspects of the application is loaded into memory (all views, all the tools, forms, etc.).
    For example, when the user changes from ViewItem1 to ViewItem2 in a ViewStack, how can I unload completely the focus of ViewItem1 memory while it is completely re-created when the user returns to it later? It goes the same for switching between States...
    Everything I can find in the documentation is to use removeAllChildren(). That works very well for dynamic content, but the main top-level object would still be in memory and static content would never get reset.
    Or that I'm missing?

    Thank you

    Also focus on the architecture of your application using the Modules. They can be unloaded.
    Tracy

Maybe you are looking for

  • Stuck on the keys saying - hibernation.tapped blue screen power on and power off

    Came home from work, powered to the top of my machine, there is a blue screen saying - put into hibernation. I filmed all the keys, use the power button to turn on/off. Help! PLEASE, I BEG YOU!

  • accesshw.dll

    Hi I need help My VI consists of a d command engine step by step, the problem I need to know how I can ercire on the port. j have installed the driver on my pc may accesshw I know comment l UTI in VI that I have Thanks

  • How can I remove tango & bing toolbar

    I had to add and remove the program. It does not allow me to delete: tango & bing unit bars or itunes.  Any help would be appreciated!

  • Installation of the application with the engine running and system Config API kills many services OR

    If I have an empty Windows 10 computer and install LabVIEW 2015 SP1f5 Run-time-Engine, then System Configuration 15.3. I see that several OR services are running OK on the machine subsequently: However, if I can install a built (LabVIEW 2015SP1) app

  • Download location for LELA

    I had LELA on my computer, but had to reinstall the operating system because of the difficulties of the computer, and now I do not know where to download LELA. If anyone knows where I could find it, it would be a great help. Thank you! Router WRT54G