X230i + Ericsson F5521gw fault

Hello!

I have a problem with my new X230i (232495G).

I want to put my (60Y3279) F5521gw of my T420s, but I got Bios error. I have the bios more recent (2.59) in my X230i.

I got this error:

"1802: unauthorized network card is plugged in - power off and remove the miniPCI network card (0BDB/1911) system is stopped.

Do you know a solution?

Thank you!

You need Ericsson H5321gw for X 230 http://support.lenovo.com/en_US/product-and-parts/detail.page?&DocID=PD024213

You may also experience this problem of driver http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-3G-mobile-broadband-problem-with-F5521gw/...

Tags: ThinkPad Notebooks

Similar Questions

  • T430 + Ericsson F5521gw

    Hi all

    This topic has been discuss before, and it is current (I have search the Forum re: my problem & no resolution provided therefore my created topic).

    I recently acquired 11 x T430 + 11 x card Ericsson F5521gw WWAN. (Fortunately, I ordered 11 unit only).

    Before, I order more... I need your help and the wizard repair my "1802: unauthorized network card is plugged in - power off and remove the miniPCI network card (0BDB/1911) system is stopped. (error code 1802: http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?DocID=HT001309)

    Any suggestion and advice would be greatly appreciated, other then re-writing/or modding the BIOS...

    Thank you

    in_vda wrote:
    OK, the WWAN card was ordered to Lenovo.

    Could you please clarify or provide a list of checking of Lenovo? MANYS thanks in advance

    The FRU list wireless for the T430 is in the BOM FRU: http://download.lenovo.com/parts/ThinkPad/t430_t430i_fru_bom.pdf

    This doc:

    60Y3195 2 FRU 6250 WiMax
    60Y3233 2 FRU 6300 WLAN
    FXC 2 FRU 60Y3247 11WLAN
    60Y3249 FRU NTA 11WLAN 2
    60Y3253 2 TP 22 WLAN FRU
    60Y3257 2 FRU Gobi3 WWAN
    60Y3295 2 FRU marble Peak
    60Y3297 2 FRU H5321w
    60Y3303 2 FRU Foxconn Hygie
    60Y3305 2 FRU Liteon Hygie

    I can't tell if others are supported by a given BIOS, but here is the official list.

    Z.

  • X230T Ericsson F5521GW - X230T compatibility?

    Can someone tell me if a: - GOBI3000 of 04W3767 60Y3279 LENOVO ERICSSON F5521GW WWAN CARD 3 G WIFI

    is compatible / should work in my X230Ti Tablet?

    Thank you very much

    Note of the moderator; subject edited to reflect the theme

    Yes, Ericsson F5521gw http://support.lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-76660 is compatible with X 230 Tablet. Hardware compatibility: ThinkPad X 1 *, X121e, X130e, X 220, X 220 Tablet, Tablet X 230.

    http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-76748

    0A 36186 frame marketing number

    Replacement part number (FRU) 60Y3279

    Wireless - reference Guide

    http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-62034

    In case you encounter random Logout problems, this could help http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-3G-mobile-broadband-problem-with-F5521gw/...

  • Portege R830 - 3G fails to initialize after returning from hibetnation

    Hello world

    I have had a Toshiba R830 for almost two years now and I love it. Even more after a few months at the time I discovered, he had 3G capacity.
    At first (with the original drivers) the capacity of the 3G does that 2 times on 3.
    Other times he would be stuck "initialization".

    I found and downloaded the latest drivers (as far as I could find) of this site and the problem is * mainly * gone but it's a pain when it happens.

    The only way I can get the modem working again is to a full reboot.
    I think it happens if I disconnect the session 3G until I put into hibernation the R830.

    Technical details:
    Laptop TOSHIBA R830 PT321A - 01 K 002
    Program TOSHIBA Wireless Manager version CXP 901 4396/41 R4C01
    Ericsson f5521gw for Modem Broadband Mobile TOSHIBA 15/11/2012 7.2.3.4

    Is there anything else I can do to fix this?
    Maybe a newer driver (even beta)? Another thing to check/set up?

    Thanks in advance for any advice.

    See you soon,.
    Andrew.

    > I think it happens if I disconnect the session 3G until I put into hibernation the R830.

    I have no experience in using 3G after the laptop wakes up from hibernation mode, but in my opinion a good idea to close the connection before going into hibernation mode.
    Should test this several times in the line to check if it s the solution.

  • 2530p HP: HP 2530p and HP HS2340 HSPA + 21Mbps, WWAN card compatibility

    Hello. I have HP 2530p and I would like to use the card top debit MOBILE HP HS2340 HSPA + 21 Mbps (Ericsson F5521GW/HP HS2340 HSPA + 21 Mbps card WWAN 632155-001 631727-002). The question is if it's comtatibile or not. Or could you please recommend me another card 3G / 4G. Thx for the answer.

    The only compatible guaranteed WWAN card is the card of EV-DO/HSDPA Mobile Broadband Module integrated HP un2400.

    This is a laptop more old (circa 2009) in order to find a 3G\4G card that is compatible with it is going to be quite difficult. You can check the improvements updated BIOS to see if the compatibility has been added for other WWAN cards.

    Update: I checked the BIOS improvements and the only thing that has been added in terms of compatibility upgrade is compatibility of SSDS. Additional compatibility with WWAN cards was not an improvement that has been added.  If the answer is that you can very well be out of luck on 3G\4G WWAN cards.

  • Install thin do not want to install drivers for a new X 220?

    We have just received some new X 220 and I've updated the drivers with Update Retriever.

    When I run install thin, it works but then did a reboot and just after he does nothing and nothing changed either. The newspaper is weird because I don't see why he's doing this restart.

    The last page of the log below:

    Info	2011 - 11-09 at 07:39:52
    to Tvsu.Gur.RuleEvaluator.EvaluateDetectionMethod (gaelle rule)
    Message: Rated detection method: _RegistryKey result-> False

    Info 2011 - 11-09 at 07:39:52
    at Tvsu.Gur.GUR2.EvaluateSeverityOverride)
    Message: Rule result: true

    Info 2011 - 11-09 at 07:39:52
    at Tvsu.Beans.UpdateDetector.LoadCoreqDependency)
    Message: An exception occurs when coreq dependency loading.
    Exception:
    Message: An error occurred during conversion of the XML element: object reference not set to an instance of an object.
    Type: Tvt.XmlPackageProcessor.PackageConversionException
    to Tvt.XmlPackageProcessor.XmlEngine.GetXml (IElement items)
    at Tvt.XmlPackageProcessor.SeverityElement.ToString)
    to System.String.Concat (Object [] args)
    at Tvsu.Beans.UpdateDetector.CalculateUpdateSeverityOverride)
    at Tvsu.Beans.UpdateDetector.LoadCoreqDependency)

    Info 2011 - 11-09 at 07:39:52
    to Tvsu.Coreq.CoreqProcessor.ProcessUpdatesImplementation (updates [update])
    Message: Process termination Coreq: Return13Updates

    Info 2011 - 11-09 at 07:39:52
    to Tvsu.Coreq.CoreqProcessor.ProcessUpdatesImplementation (updates [update])
    Message: Process termination Coreq: Return13Updates

    Info 2011 - 11-09 at 07:39:52
    at Tvsu.CommandLine.CommandLineParameters.StartCommanLineParameters (String [] arguments)
    Message: Notify method: INSTALLATION

    Info 2011 - 11-09 at 07:39:52
    at Tvsu.Gui.FlowScreens.Messages.ShowStaticMessage (String message, String title, String mastheadtext, t, Boolean check MessageType)
    < one="" or="" more="" of="" the="" packages="" you="" selected="" to="" install="" will="" restart="" your="" system.="" it="" is="" recommended="" that="" you="" save="" any="" pending="" work.="" do="" you="" want="" to="" proceed="" with="" the="" installation="" now?="">

    Serious 2011 - 11-09 at 07:39:52
    at Tvsu.CommandLine.CommandLineParameters.StartCommanLineParameters (String [] arguments)
    Message: Error on command-line parameters
    Exception:
    Message: Showing a modal dialog or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
    Type: System.InvalidOperationException
    to System.Windows.Forms.Form.ShowDialog (IWin32Window owner)
    to System.Windows.Forms.Form.ShowDialog)
    at Tvsu.Gui.FlowScreens.Messages.ShowStaticMessage (String message, String title, String mastheadtext, t, Boolean check MessageType)
    at Tvsu.CommandLine.CommandLineParameters.StartCommanLineParameters (String [] arguments)

    Info 2011 - 11-09 at 07:39:52
    at Tvsu.CommandLine.CommandLineParameters.StartCommanLineParameters (String [] arguments)
    Message: Installation was successful, and the reboot has been deleted

    I think that the error is related to a dialog box. When I run manually a popup window appears: "Restart Notification", even if in my command, I put "noreboot".

    EDIT: This is my command line-> ThinInstaller.exe/cm-Research-action INSTALL - noicon - includerebootpackages 1,3,4 - newspaper "C:\Windows\Temp" - noreboot

    OK, I found a quick solution all by myself

    Her bloody Ericsson F5521gw wireless WAN driver was set to "reboot Forces." (reboot type1). I changed this type 3 and everything was good. It now works. I hope that this pilot will settle in any case.

  • EliteBook 8470p: Elitebook 8470p and the wireless module

    Hello.

    I installed the card wwan (DW5550) Ericsson F5521gw of dell-branded.

    But at startup I get the error message: "unsupported... wireless module. "WWAN Module ID (703).

    Can I buy and use the same marked hp Ericsson F5521gw (hs2340 HSPA +) card with my laptop?

    Or how to determine what wwan modules are suspported by my laptop model.

    Please let me know.

    Thank you.

    @just42na

    These are your options.

    HSPA + Module ADSL Mobile HP 710788-001 Hs2350

    HP un2430 EV-DO/HSPA Mini Card 702080-001

    HP un2430 EV-DO/HSPA Mini Card 702080-001

    Un2430 EV-DO/HSPA Mobile Broadband Module HP 634400-001

    When ordering make sure you use the HP part number.

    Your manual here.

    http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03659338-3.PDF

    HP EliteBook notebook PC - videos to remove/replace 8470

    http://h20464.www2.HP.com/results.htm?SID=5212907&MEID=8E1D5919-9C9D-416A-AB8A-1B5F6B405470

    REO

  • X 220-card Whitelisted WWAN to W10

    Unfortunately, the Ericsson F5521gw W7 driver that worked for W8.1 works more on W10.

    Is it possible to find a WWAN card for the X 220 which would work in W10?

    220 x has no flaws if we study the market trends)

    Of course, mc8355 works fine in the 220 x, it's the compatible card officially. But a little slower then a the Ericsson.

    I had advice to wait a while, probably win10 drivers for older wwan cards appear.

    Another way is to use modern LTE cards that have drivers from manufacturer of win10 and are supported by the new OS. But this decision moded BIOS and, probably, maybe need some installation settings.

  • 10% battery standby time of cell?

    Hello.

    I have a ThinkPad slate tablet (model 1838 - 2DG with an Ericsson F5521gw inside, no SIM card installed). Battery only lasts six hours on Wi - Fi (without CPU intensive tasks running on it, middle of the display brightness). There is not much time for a new (for the most part) unit which had a first full charge before using.

    One of the reasons for this performance of low battery, IMHO, is that a battery of 10% is wasted on 'Standby Cell' (with a time of 100% without a signal). I would say that this is a consequence of an old udev for WWAN, even if there is no SIM card installed, but I'm far from an expert Android (or Linux).

    Can anyone confirm if this problem exists on ICS? (I would say that this question is for Lenovo staff, that there is no official image of ICS available for public use).

    Thank you!

    If you look through the market - there are apps that turn on/off manual network wann

    the problem if you enable flight mode and use only wifi from there?

    Edit: just re-read your post - since you have an installed wann card, always will be when he's around. me which is also even if it is not connected to any network - because the map is always initialized. manually disable mobile data do nothing as he again search signal in its "State of sleep. Currently, the only option is physically remove the card - or use airplane mode + wifi on

  • 8 win does not recognize modem broadband

    Hello

    I use the Win8 Pro and have a Lenovo X 220 with modem broadband. Problem is Windows does not recognize it as such and so I can't use the new features.
    Someone have an idea of what I could do or has the same problem and found a solution?

    Kind regards
    Thomas

    Hi Thomas,

    You can review the article and follow the steps in the link from the manufacturer's website:

    No driver of Broadband Mobile Ericsson F5521gw for Microsoft Windows 8

    http://support.Lenovo.com/en_IN/detail.page?docid=HT076016

    In addition, you can validate the application in the community of Lenovo support for further assistance:

    Reference:

    http://forums.Lenovo.com/

    Thank you.

  • F5521gw Driver Update for T420s in accordance with the T430 systems...

    Hi guys,.

    You have pushed out a 7.1.1.0 update driver for the F5521gw card for the T430 but have not updated the T420 systems for the same card.

    Pilots of the T430 works on my T420s so out of curiosity, why isn't he there had an update for us guys?

    Be nice to think we were not left behind, we are not yet barely a generation old yet!

    DangerMouse,

    Unless the updated driver will be fixing some bugs or improved then the development team will not release the update that the team would be more focused in the fixing of the drivers or software with bugs.

    Thank you for taking the time to install the 7.1.1.0 and the display back. So for those who want to try the 7.1.1.0 pilot on their T420s or T420 with Ericsson card, they can do so, however, it's at their peril to is not in the list of compatibility of Lenovo.

    Thank you

  • Fault on my Macbook Pro in Nigeria

    I have a macbook pro that I bought 2 years back and all of a sudden the laptop won't boot any more although when the load is connected the charger shows green color.

    I work in nigeria and made visit to the store in Mall i city of ikeja told that I have to send the phone to the service center located in the State of dolphin, ikoyi.

    I sent the laptop to the service center but was asked to pay a fee of about $ 50 (20 000 naira) American so that they can diagnose the failure on the laptop and then let me know what the fault is and how much it would cost to fix it.

    What is the normal procedure?

    Waiting for your answer? Anyone have a similar problem before?

    Kind regards

    Charlie

    It is not unusual for a non-Apple store to charge a diagnostic fee.

    This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

  • My Mac pro LED backlight fault it?

    Hello, all the

    As subtitle, my Mac pro LED backlight fault it?

    I have attached the picture of my screen.

    Please, help me double confirm (the lower edge of the screen). Thank you very much.

    Kind regards

    Chanming

    What model of MacBook Pro?

    If you connect an external monitor and mirror display which displayed on the external monitor?

    Looks like a display problem. I would like to make an appointment at the Genius Bar to an Apple store.

    Shop Apple Store - Genius Bar

    https://www.Apple.com/retail/Geniusbar/

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • I have a fault of the screen

    I have a screen fault find a solution and I am in security

    Please indicate what type of device Apple you have that has a defect of the screen. You have posted all over the map here, and it is difficult to identify. Also, please describe what is this defect.

  • My 5 years old Satellite Pro P300-19 q has developed all of a sudden a fault

    Without realizing, I posted the message below on the Forum we Toshiba:

    Hello

    My laptop which is 5 years old and has worked without any problems, has suddenly developed a fault I don't seem to be able to untangle. It starts ok and gets on the screen "Toshiba Leading Technology" and it's not there. Should not or reaction to something. I tried to enter the power on Start menu and pressing the F12 key, it recognizes and says 'Please wait' but nothing happens. It applies to "Configure" button F2 and F8. There is absolutely no response and HDD led light does not illuminate.

    I have not installed or changed anything. It runs Windows 7 and I don't have the recovery disc and the installation CD original W7 but they are useless if I can't access the startup option.

    I also removed the HD and connected by USB connection to my work desk and access all my files and programs, so it doesn't seem to be something wrong with the disc either.

    Can someone offer me some suggestions?

    ___I HAVE HAD THE FOLLOWING RESPONSE_; __

    Looks like you have a corrupted BIOS.

    I recommend asking Toshiba http://pc-support.toshiba-europe.com/ for any help. They got the disc special crisis to retrieve the faulty ROM BIOS module and instructions on how to install it.

    I contacted the technical service of Toshiba UK enclosing the message above but have not heard
    anyone after. Does anyone have information about this recovery disk and where I could get it?

    I also think that the BIOS can be troublemaker in the whole of the situation. When you start your machine, it begins with the verification of low level material and later start to load the operating system preinstalled.
    In your case the laptop is blocked for some reason any on this first step.

    Unfortunately, your options are pretty limited. What you can try is to remove the check and RAM modules and so portable HARD drive will pass this first stage.
    AFAIK the disk of this crisis is for internal use only so I don't know if you will get it somewhere. What you can try is to google a bit and maybe upload it somewhere with specific instructions on its use.

    In the end, I must say that these issues don't occur so often and I have to ask anyway: you may have updated the BIOS or done something that may be responsible for this?

Maybe you are looking for