X230T rigid hinge, can damage the display of stress?

Similar Questions

• Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

  Hi all

  Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

  The Mac Mini is the end of 2014 with 2 ports thunderbolt model and is connected to a mini display port monitor.

  I'm just fed up of having to pull on the cable of the Mac Mini to connect the MacBook Air.

  Any ideas? Suggestions?

  Thanks in advance!

  Using the built-in screen sharing are an application like:

  ScreenRecycler

  Only some iMacs support the target Display Mode

  Use your iMac as a display with the target - Apple Support Display Mode

• I can control the display size?

  Acrobat X.  When I go into the properties and additional metadata, the screen that displays quickly keeps me back out or go ahead.  Note that it DOES NOT crash my computer.  The problem is that it displays so important that the up and down buttons extend beyond my screen, and I can't use the mouse to drag upward or down to access them, so to do something more with my computer I have to go into the Task Manager and close Adobe from there.

  There is no possibility to display the metadata part before I open it.  If the Acrobat screen partially, additional metadata screen is always the same size.

  I have a very big screen TV flat screen, the screen size is not the issue.  I need set the display to the opening size.

  Thank you

  Mogadeet

  If you have rights, you should be able to right click on your desktop and select Properties. The selection of the settings tab. You will see a slider with the title of the resolution of the screen. Move it to the right to increase the resolution of your screen. Click Ok once you are on the desired resolution and then select the confirmation to keep your chosen resolution, once the image of the screen adjusts.

• If I put more lower memory card on a computer that has the memory card fast (just for the diagnosis of scenario) can damage the computer?

  Hello

  If I put a memory ddr3 or ddr2 has a speed lower than the an origin whch is on the motherboard (just to diagnose the scenario), which would damage the computer?

  Thank you

  Johan

  Hi Johan,.

  DDR2-400 has a transfer rate of 3200 MB/s. DDR2-533 has a transfer rate of 4266 MB/s.

  High speed DDR2 DIMMS are compatible with low speed DDR2 DIMM, although the motherboard or controller memory CPU will be bound to the limits of the low-performance modules.

• Can damage the batteries or AC cause overheating?

  I just cleaned my vents and fan and I still think that the laptop (Pavilion dv7 4000 series) is warm. When it works on battery it 75 - ish and when I plug the AC it get 85 + degrees. Is it possible that a damaged batters or AC adapter / CC causes much more heat? If this is not the case, what would it be?

  If the laptop stops due to overheating, then yes it probably requires a repair. They would usually check the thermal paste/pad and fan to make sure it's working properly and that there is no internal blocking.

  You could try a cooling block to see if this will help to keep your laptop cool enough to exploit.

  You can also read through this to see if there's something more you can do: http://support.hp.com/us-en/document/c01657439

• Can damage the FPGA module if I connect accidentally two pins writing together.

  My current configuration has a PXI chassis with two FPGA modules.  Each FPGA module has an adaptation Module 6581 on that.  I would like to test the signal through my system path by having the user to move some cables that would be a reason for a return to the other looping FPGA.

  I fear, however, the risk of the user is not correctly as shown and somehow a channel available in writing that connects to another channel write-enabled.  This damage to the FPGA or adaptation modules?

  Hi Brian,.

  Your concerns are correct. We never want to connect two pins that are output voltage. If two pins are outputs digital mistakenly connecting them together may damage one or both nodes in output since there is nowhere to flow the potential.

  It is well to connect to two pins that read a voltage. If both pins running entry digital (reading of the pins), as there is no risk, nor pin would be likely to be damaged.

• Which of the following activities can damage the performance of datadbase?

  What activities can be identified as the common causes of impassable of suboptimal performance of database?
  
  1 large amounts of recursive SQL executed by SYS
  2. recursive SQL executed by one user other than SYS

  The correct answer must be 1. large amounts of recursive SQL executed by SYS.
  Please see the following statement in this linked page:

  http://www.Oracle.com/technology/deploy/performance/PDF/perf_method1.PDF

  "High of Recursive (SYS) SQL levels: large amounts of recursive SQL executed by SYS.
  could indicate management activities of space, such as the measure benefits, taking place. It comes
  impassable and impact on the user response time. Recursive SQL executed under another user, what ID is
  SQL and PL/SQL and it's probably not a problem. »

• PERC 5 - no Configuration is present! Foreign import can damage the hard disk data ("this is an irreversible process)?

  Our 2950 has humming well when...

  Physical disk 0 change LED color from green to flashing orange.

  Configuring Raid 0 has 2 two identical disks combined into a VD.

  To troubleshoot an amber blink, we re sitting readers and even swapped their location, ultimately restore their substantive positions of basket in their original locations.

  Suddenly, amber LED changed to green new!

  However, the server is unbootable-"zero or logical drives found".

  Reports PERC 'no present Configuration!' in the config of VD but also two reports 2 error free readers in the config of PD.  He also pointed out a 1 DG and VD (1) and (2) PD in config stranger (contrary to what config VD reports - "no present Configuration."

  Ubuntu in rescue (booted from the CD) mode does not see two physical disks.

  What should we do?

  Thanks in advance - this server hosts the web services of a not-for-profit organization.

  Excuse the rawness, but you need to know about the functioning of the RAID and this server before trying anything. There are many places in which he could definitely bad (I'm not saying that isn't already).

  Start the utility CTRL-R, VD MGMT screen, highlight the controller, F2, foreign Import.

  If she fails to import, go to the CTRL MGMT screen and give me the version of the firmware of the lot.

  Next time, call Dell technical support or ask a question here to help them know what to do and how to solve it.

• Can satellite L550 - I extend the display?

  Hello

  I was wondering if I can extend the desktop on an external monitor? I need to work on a desktop computer screen double. I know the L550 has a VGA output, however-, I have a feeling, that it can only be used to send 1 office to a different view or duplicate.

  If it makes a difference the model I want to buy is the L550 - 1 9 or L550-1CC

  Thanks :)

  Hello

  Of course, you can extend the display. Simply connect an external monitor to your laptop and in the options of the display driver, you can select Office extend Windows on this monitor.

  Have you tested this?

• How can I change the display settings for the lifecam VX-2000 software provide a mirror image?

  I've tried everything and looked everywhere online.  Can you help me?

  Hi ToniDanile,

  You can change the display settings for the LifeCam software to fix the problem.

  For more information see the article mentioned below:

   

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  http://support.Microsoft.com/kb/933310

  Let us know if it helps.

• Problem with the display for Satellite M100-221 driver

  In the section of the driver of this site, I can download the display driver for my SATELLITE M100 - 221 (PSMAE0).

  There are Mobile Intel 945 Express Chipset
  For Windows Vista, I can download the dirver:
  17/10/07 display driver Intel Windows Vista 7.14.10.1227

  But for Windows XP driver for ATI chipset:
  21/11/07 Display Driver ATI Windows XP 8.283

  Where can I get display driver for Intel 945 chipset for Windows XP?

  PS: Sorry for my English, I hope you can understand me =)

  Hello

  Recheck the Toshiba download page. It seems that Toshiba has seen your ad here. ;) Driver Intel is now available.

• 4540 proBook s how to disable the display without closing the lid

  Hi, I have a probook 4540, windows 7 the runing, the problem is that I want to turn off the screen when I use m not especially when on battery to save energy. I don't like rubbing the cover whenewer I need done does anyone know an alternative to the closure of the screen?

  before this laptop, I had an acer aspire 5733. It has a function key fn + f6 Wick off the screen, unfortunately, the hp company had no idea of tis, for example, the fn + f5 is useless because in windows you can lock the computer by pressing the windows key + L logo

  A good solution for this push windows Mobility Center (Windows key + X) to include a screen off button.

  Packages were conducted in time of Vista but work fine on W7 all flavours & Bit.

  Link below includes the download 32-bit (x 86) & 64 Bit(x64) as well as some info & screenshots.

  http://www.iStartedSomething.com/20071221/extending-mobility-Center-tile/

  Once installed, you can use the link in the center of mobility turns off the screen or you can find the display file - off installation .exe & map to a hotkey, shortcut on the desktop or PIN to the taskbar etc... jobs sold...

  Make a rocking good BT also mobility tile.

• Put on the change of the display in the forum.

  Dear all,

  Is there a way we can change the display of a thread? Because it is not readable if the discussion is ongoing (more nested).

  Order the link store Image File in BLOB column Oracle Forms 6i

  Manu.

  You can change the display Style threaded flat Discussion in your user account preferences.

• PDF spreads to single Pages, and then specify the display options

  I have a big document InDesign implemented in 11 x 8.5 spreads. I need to export to PDF as single pages, but also to specify the display of the page as 'fit to page'.

  If I use the print options, I can get single pages, but can't seem to specify the page display mode.  If I use the interactive options I can specify the display of the page, but all exports chemically instead of single pages.

  Am I missing something here?

  Not really. See http://indesignsecrets.com/interactive-pdf-from-indesign-cs5-always-has-spreads-on.php

  There is a way to script down in the comments who will tip spreads and put out in the interactive export (Don't stop to the link to the script that separates the "spreads" apart).

• Doesn't show is not a space for the display of documents

  Hello!

  Please see this page:

  http://www.Martinique.org/accommodations/hotelsTest.php

  For now, we can see the display of images in the registers of East Cape hotels.

  There are sometimes where we will see 2 photos instead of 3 and sometimes not at all, because some hotels do not have photos.

  If I leave my script in this way, I'll see an image placeholder for images of empty folders.

  What I want to do is not to have the placeholder when I don't have any image in the database for this record.

  How to accomplish this?

  Thank you very much!

  Yes, this seems fine.