X32bit Oracle Clusterware/PAP Windows Installer or Windows 64-bit?

Similar Questions

• Y at - it Oracle 11g for windows 64-bit XE?

  Hey, guys:
  
  I am a newbie to install Oracle. I need to install Oracle XE 11 g. I checked it on Oracle, only Oracle Database Express Edition 11 g Release 2 for windows x 32. My OS is Windows 7 64 bit. I am so worried if there are potential compatibility problems. There are Oracle XE 11 g for windows 64-bit (or is it important to work with OC4J 10 g oc4j_extended_101350 and APEX 4.1 earphone)? Whereas I have to install a listener OC4J and Oracle APEX. I am concerned about this compatibility issue more. (I installed OC4J 10 g (oc4j_extended_101350) and installed as a windows associated with the application javaservice service, he spent a lot of time to solve the problem of compatibility)
  
  Thank you very much!
  
  Sam

  This has been asked and answered several times in these forums - use the search function of pl - https://forums.oracle.com/forums/search.jspa?threadID=&q=XE+AND+64+AND+windows&objID=c18&dateRange=all&userID=&numResults=15&rankBy=10001

  HTH
  Srini

• Do you have Oracle Fusion Middleware Infrastructure Installer 12.2.1 and content Webcenter 12.2.1 Support windows server 2008 R2?

  Do you have Oracle Fusion Middleware Infrastructure Installer 12.2.1 and content Webcenter 12.2.1 Support windows server 2008 R2?

  Hi Saif,

  This is not supported for the content... Please check the certificate of the MOS

  Support content 12.2.0.1 MS x 64 64 bit 2012 and 2012R2 and same is applied to the installation of Oracle Fusion Middleware Infrastructure program.

  

  Thank you

  Amey

• Installation of Oracle Client 32-bit on Windows 64-bit

  Hello

  I am trying to install the Oracle 32-bit (version 11.2.0) client on a Windows 64-bit server (Microsoft Windows Server 2008 R2 Standard, Service Pack 1).

  It is my understanding that this is supported and should work. However, the Oracle 64-bit (version 11.2.0) client is already installed on the server.

  We need the 32-bit client from an older application requires it.

  The GUI for the installation of the client starts very well - but when step "Finish Installation" MISTLETOE evacuated all of a sudden. The installation log file ends

  with

  INFO: Setting the value for the variable INSTALL_TYPE

  INFO: Variable "INSTALL_TYPE" wird auf "InstantClient' aufgefuhrt. Der Wert wurde von der Befehlszeile restaurants.

  INFO: addition of the variable oracle_install_NoMigration to table command line args

  INFO: addition of the variable oracle_install_RACInstall to table command line args

  INFO: addition of the variable oracle_install_WindowsSystemDirectory to table command line args

  INFO: update of the State of STATE_INIT_SESSION computer

  INFO: Create and initialize the Interface of Session handler

  INFO: PrepareForInstallOperations to call OiicInstallAPISession

  NEWS: Execution of the iterator until the summary

  INFO: Initialisieren of the Installationsbestands

  INFO: Einrichten of the Installationsbestands

  I am running as a local administrator installation - I tried installing with setting the compatibility mode to Windows 2000. No success at all the :-(

  Am I wrong that the 32-bit client ths is certified with this version of windows? Does anyone have experience with the same situation?

  Any help will be appreciated!

  Rgds

  Jan

  
  

  Do you use separate ORACLE_BASE directories?

  Oracle & reg; Database

  HTH
  Srini

• Failed to open oracle functions after R12 installation on windows 2008 64 bit

  Hi guys
  I installed oracle R12.1.1 on windows server 2008 R2 64-bit, then the application opens but all forms of oracle functions cannot open, the message appear frm-92101, I try the solutions in the net, but no effect and I get another windows which and this message appears when trying to open an another oracle functions
  ""
  program currently running on this computer is attempting to display a message, then
  title of the message:
  E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin\java '-serv ".
  
  
  This problem come when a program is not completely compatible with windows
  ""
  This message when you start windows too, but the path of java inside files of oracle applications, please help me if oracle r12.1.1 compatible with win 2008 64 bit or not?

  I installed oracle R12.1.1 on windows server 2008 R2 64-bit, then the application opens but all forms of oracle functions cannot open, the message appear frm-92101, I try the solutions in the net, but no effect and I get another windows which and this message appears when trying to open an another oracle functions

  Direct installation of R12 on Windows 2008 64 bit is not supported. You install it on a Windows 32-bit operating system, and then migrate to Windows 64 - bit.

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
  Migration Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]

  Thank you
  Hussein

• Error - installation of Oracle EBS 12.1.1 for Windows (32 bit) on XP Prof SP3

  Can anyone help?
  
  I recently downloaded suite EBS worm Oracle delivery and Installation Express train:
  Oracle EBS 12.1.1 for Windows (32-bit); Release date: 12.1.1.0.0; Part number: B54471-04 Update: 14 / JAN/2010
  
  But the installation process stopped on step 2 of 5.
  (Status bar displays 20% and)
  Command: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrun11g.cmd)
  
  Oracle quick Application installation wizard alerts:
  RW-50004: Error Code when you run the external process. Check the log file for more details.
  Install the driver of database running for instance SCREWS
  
  Log file:
  (Location: D:\oracle\VIS\db\tech_st\11.1.0\log\appsutil\VIS_unit6253\02091538.log)
  
  Treatment DriverFile = C:\Stage12\startCD\Disk1\rapidwiz\template\adridb.drv
  The instantiation of the drivers for operation C:\Stage12\startCD\Disk1\rapidwiz\template\adridb.drv
  instantiate the file:
  Source: C:\Stage12\startCD\Disk1\rapidwiz\template\adrun11g.cmd
  dest: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrun11g.cmd
  backup: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrun11g.cmd to D:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\VIS_unit6253\templbac\adrun11g1.cmd
  instantiate the file:
  Source: C:\Stage12\startCD\Disk1\rapidwiz\template\adrundb.cmd
  dest: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd
  backup: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd to D:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\VIS_unit6253\templbac\adrundb1.cmd
  Step 0-5
  
  Command: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrun11g.cmd
  Step 1 of 5
  Step 1 of 5
  Command: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd
  Step 2 of 5
  Execution: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd
  C:\Stage12\startCD\Disk1\rapidwiz > REM
  C:\Stage12\startCD\Disk1\rapidwiz > REM $Header: adrundb.cmd 120.12 marderiu noship 19/01/2009-06:29:56 $
  C:\Stage12\startCD\Disk1\rapidwiz > REM #.
  C:\Stage12\startCD\Disk1\rapidwiz > REM
  C:\Stage12\startCD\Disk1\rapidwiz > REM This file is automatically generated by the automatic configuration service. It will be read and
  C:\Stage12\startCD\Disk1\rapidwiz > REM crushed. If you have received the order to edit this file, or if you are not
  C:\Stage12\startCD\Disk1\rapidwiz > REM be able to use the settings created by the automatic configuration service, see Metalink Note
  C:\Stage12\startCD\Disk1\rapidwiz > 387859.1 REM for assistance.
  C:\Stage12\startCD\Disk1\rapidwiz > REM
  C:\Stage12\startCD\Disk1\rapidwiz > REM #.
  C:\Stage12\startCD\Disk1\rapidwiz > REM
  C:\Stage12\startCD\Disk1\rapidwiz > FOR /F "delims is" %a IN (' DATE/t') DO (set date = % a)
  C:\Stage12\startCD\Disk1\rapidwiz > (set date = 10/02/2010)
  C:\Stage12\startCD\Disk1\rapidwiz > FOR /F "delims is" %a IN (' TIME/t') DO (set time = % a)
  C:\Stage12\startCD\Disk1\rapidwiz > (set time = 11:15)
  C:\Stage12\startCD\Disk1\rapidwiz > INSTALLATION PHASE STARTED ECHO: DATABASE: 2010-02-10 11:15
  
  THE INSTALLATION PHASE BEGAN: THE DATABASE: 2010-02-10 11:15
  C:\Stage12\startCD\Disk1\rapidwiz > SET JRE_PATH=C:\Stage12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
  C:\Stage12\startCD\Disk1\rapidwiz > SET JRE_CP =. ; C:\Stage12\startCD\Disk1\rapidwiz\jlib\java; C:\Stage12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\share.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
  C:\Stage12\startCD\Disk1\rapidwiz > SET XML_FILE=\admin\VIS_unit6253.xml
  C:\Stage12\startCD\Disk1\rapidwiz > SET XML_FILE=D:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_unit6253.xml
  
  C:\Stage12\startCD\Disk1\rapidwiz > SET PATH = C:\Stage12\startCD\Disk1\rapidwiz\unzip\NT; C:\V98\VC\bin; C:\Cygwin\bin; C:\Perl\site\bin; C:\Perl\bin; C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem; C:\Program Files\Fichiers SharedCOM Shared\DLLShared\; C:\Program Files\Fichiers SharedCOM Shared\10.0\DLLShared\; C:\Program Files\Fichiers SharedCOM Shared\9.0\DLLShared\; C:\Program Files\QuickTime\QTSystem\; «C:\Program Files\Fichiers Autodesk Shared\ «;» C:\Program Files\Fichiers Files\Repro Desk; C:\Program Files\Microsoft SQL Server\80\Tools\Binn\; C:\Program Files\Microsoft SQL Server\90\DTS\Binn\; C:\Program Files\Microsoft SQL Server\90\Tools\binn\; C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\; C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\. H:\CSTPNT32; C:\MSSQL7\BINN; C:\Progra~1\DISKEE~1\DISKEE~1\;\Microsoft.NET\Framework\v1.1.4322
  
  C:\Stage12\startCD\Disk1\rapidwiz > EC SET = error code
  C:\Stage12\startCD\Disk1\rapidwiz > setlocal enableextensions
  «"C:\Stage12\startCD\Disk1\rapidwiz > set/p unpw =»
  C:\Stage12\startCD\Disk1\rapidwiz > for /F "usebackq tokens = 1, 2 delims = /" %i in ('APPS/APPS") set APPSUSER = %i & & set APPSPASS = j %
  C:\Stage12\startCD\Disk1\rapidwiz > set APPSUSER = APPS & & set APPSPASS = APPS
  C:\Stage12\startCD\Disk1\rapidwiz > IF '5' == '1' (THREADS SET = 1) ELSE (SET = 2 THREADS).
  C:\Stage12\startCD\Disk1\rapidwiz > CD /D C:\DOCUME~1\MUHAMM~1\LOCALS~1\Temp
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > path settings and classpath display REM for forest exploitation
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > echo "PATH to the - C:\Stage12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java - Setting."
  
  "Defining the path to-C:\Stage12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java-.
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > echo "CLASSPATH setting-.; C:\Stage12\startCD\Disk1\rapidwiz\jlib\java; C:\Stage12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\share.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar-".
  
  "Setting CLASSPATH-.; C:\Stage12\startCD\Disk1\rapidwiz\jlib\java; C:\Stage12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\share.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar-".
  
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM these steps occur when dbseed is not "No. Database".
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > if 'View Demo' == "No. Database" goto: NO_DB
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > segs restoration UPDATE of REM in the context
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > if 'View Demo' == 'Fresh Install' goto: FI_DB
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > set DRVNAME = gvision.drv
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > if 0 == 0 goto: UPD_RBS_VI_OK
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > goto: DONE_WITH_RBS
  
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > if 'D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd' == 'D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd' (if not '' runProcess_3' ' == 'FALSE' (goto: "runProcess_3") else (goto: runProcess_1))
  
  RW-50010: error:-script returned an error: 1
  RW-50004: Error Code when you run the external process. Check the log file for more details.
  Install the driver of database running for instance SCREWS
  
  
  Thank you.
  
  Antenor

  Hello

  The log file shows this error:

  [AutoConfig Error Report]
  The following report lists errors AutoConfig encountered during each
  phase of its execution.  Errors are grouped by directory and phase.
  The report format is:
            
        ouicli.pl               INSTE8_APPLY       -1
  
  AutoConfig is exiting with status 1
  

  Please see (Note: 989752.1 - installation 12.1.1 appears to hang it on Windows and later failed with the RW-50004 error code).

  Kind regards
  Hussein

• Installation 11.1.2.1 using oracle database in windows server 2003 64-bit

  Hi gurus,
  
  I am about to install hyperion version 11.1.2.1 with oracle on a windows 2003 64-bit database.
  
  Do I need IIS component for hyperion to install?
  
  Thanks in advance

  Hello
  IIS is required only if you install epma, fdm, and/or hfm to the server.

  See you soon,.
  Alp

• Oracle SQL Developer/Oracle 11 g/Windows 7 - cannot connect 'sys as sysdba'

  Hello
  
  I downloaded and installed SQL Developer 3.2.20.09, the latest version, separately from Oracle 11 g, because the version provided with Oracle 11 g did not work properly.
  
  Now, I'm trying to connect SQL Developer 3.2 to my instance of 11g Oracle installed on Windows 7.
  
  I can log in with the user name SYS AS SYSDBA using SQLPLUS, text bundled with Oracle 11g, with a password to null and without any problem.
  
  However, when I try to connect to the same instance using the graphical tool based on Java, Oracle SQL Developer 3.2 I get this error:
  
  Status: Failure-Test failed: ORA-01031: insufficient privileges
  
  I already checked the computer management and I am already a member of administrators and 'ORA_DBA' groups.
  I already checked tnsnames.ora, etc. and everything is indicated as it should.
  I also checked my SID and it corresponds to what was named during the installation of Oracle 11 g.
  
  Is someone can you please tell me why I can't connect using SYS AS SYSDBA?

  Connection to SQL Developer as the user SYS to Getting Started tutorial

• What is the number of 11.1.0.6 patch (Microsoft Windows 32-bit)? It is still available in My Oracle Support?

  Hello

  I just need Oracle 11.1.0.6 (Microsoft Windows 32-bit), can we know what is the patch number for this and it is still available for download, or I have to ask oracle?

  Is also 11.1.0.6 needs basic setup program (11.1.0.1)?

  PL see the instructions at the bottom of this page - Oracle Database Software Downloads | Oracle Technology Network | Oracle

  11.1.0.6 is the basic version.

• Oracle ASM on Windows

  I think I have I need help to get my right to ASM storage. Recently I changed businesses and the new place is a House of Windows, so Oracle databases are all on 2008 R2 machines. I run Oracle RAC on both physical and virtual before, but only in Linux/Unix environments (up to now, I still prefer) so I'm still learning some of the ins and outs. This company seeks also to travel to the RAC, ASM is in the mix. To start my tests, I have implemented an ASM instance for a single host that will eventually become a pole of development taking into multiple databases. However, before I set up data bases, the host is locked up. I think it has something to do with the configuration of the disk, because while the entrapment took place while the virtual machine is idling, several crashes occurred when I try to drop a disc from the asmca utility. I followed the Oracle documentation for Windows platforms, but this documentation does not offer overview of storage on vmware virtualization.

  Here is my configuration:

  VMware: vSphere 5.5

  OS: Windows 2008 R2 Standard

  Memory: 12G

  Storage: OS: 60G; ASM: 20G, 5G, 5G

  Oracle Grid: 11.2.0.4 (more January 2014 CPU)

  Oracle database: 11.2.0.4 (more January 2014 CPU)

  Other details (perhaps important, perhaps not):

  (1) I have a large pages activated

  (2) drives are supplied thin. Note, I always thick-stocked my ASM, but our admin SR records. HE made a policy that all disks must be supplied thin for efficiency. I don't know if this could cause a problem.

  (3) the 3 ASM disks are running using the paravirtualized SCSI driver

  (4) the host also has an OEM 12 c Agent installed and running.

  I'm new on the Windows platform when it comes to Oracle (I managed a lot of SQL Server DBs), blocks do not appear to produce any type of data in the logs.

  Just for someone who comes across this post on the forum, update the ESET software kept interfering with the DSO, so I'm back in business. In response to the previous notice, I am the first full-time, home s/n they hired, and what I learned to work with is regardless of the parade of consultants put in place in recent years. Sometimes you gotta work with what you have. It's kinda a mess overall, to say the least, but I'm slowly getting it resolved. Linux is in the cards, but not in this series of changes.

• ERROR: This Setup program does not support installation on a 64-bit Windows

  I just bought the first items 14 and trided to install it, but got: "ERROR: this Setup program does not support installation on a 64-bit Windows operating system." Please download the 64-bit version of first Elements". So, I know that I must have downloaded the wrong version. (We are still in 1995, I thought that these applications have been more intelligent these days...) SO, how can I do now? Is it possible to download the right version and use the same license number? Need help how to proceed!

  You can download the 64-bit link version:

  Download first Elements | 10, 12, 14, 11, 13

• Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?

  Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?

  PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  PSE 13 trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

  (Info for PC vs Mac: https://forums.adobe.com/thread/1658959?sr=inbox&ru=3738552)

• This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.

  This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.  How to work around this issue and get this downloaded.

  Lisa, please try of products download Premiere Elements | 10, 11, 12, 13 and let us know if you need help with this.

  Atul_Saini

• This installer does not support installation on a Windows 64-bit operating system

  This installer does not support installation on a Windows 64-bit operating system

  Click on the below link and then expand area first elements 13

  Then download the 64-bit Installer Setup file

  https://helpx.Adobe.com/premiere-elements/KB/premiere-elements-downloads.html

  Name of the file:

  64 bit

  Download (1.8 GB)

• I'm unable to install photoshop elements13 as a result of a mistake. It shows no error code but said - this installer does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.

  I'm unable to install photoshop elements13 as a result of a mistake. It shows no error code but said - this installer does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.

  Download the 64-bit Installer,

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".