X61s maintenance manager/battery power and win 7 power management

I know that my beloved Thinkpad is almost an antique, but I was struggling with the Lenovo Power Manager utility, after a fresh install of Win 7 Home Premium.

First, it seems like the Lenovo's PM and the management of Aboriginal food Win 7 can have values in conflict for similar parameters (such as low and critical battery levels, for example).

Most importantly, I can't get the battery maintenance functions in the Lenovo PM to do anything. If I say to manage the level of load to the maximum lifetime, battery charging to 100% and just stay there. If I use the laptop on battery and put back in charge, same thing - it costs just 100% and stays there.

In addition, reset battery does not seem to do anything either. It is pretty hard to tell if it is still running. What seems to happen, is that I'll go through the steps, and the large button flashes slowly. That means it is running? But in any case, nothing happens. The battery is just sitting there fully charged.

Thanks in advance for any help!

I have no advice to give, but I can confirm that my X61s with Win7-64 and PM v6.64.2 seems to work very well. I have thresholds of 30% battery charge / 80% of the value. PM keeps the battery charged within this range.

Tags: ThinkPad Notebooks

Similar Questions

  • How the battery power can be adjusted to connect and charge

    Original title: battery

    How the battery power may be adjusted to trendy and supported? Power management does not allow chraging battery to mobile.

    Hello Examplaire,

    Thanks for posting in the Microsoft Answers forum! If you could provide the information requested by Thahaseena M, we can better help solve your problem. In the meantime, you can find help from the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

    Hope this helps J

    Adam
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • X230t win 8 battery 100% and maintains load

    Hello

    I am running Windows 8 on my X230t. All drivers are up-to-date of Lenovo (using system update 5).

    I don't use a lot of my battery. I've used several times in the past without problem. However, today, I charged my battery about 70%, and when he reached 100%, he wouldn't charge. I tried to use another AC adapter, restart the computer, remove the battery discharge and then recharge the battery, but nothing worked. The electric windows icon sayins 100%, hip, charge. Green also the charge status LED indicates that the battery is charging. This happens even when the computer is completely shut down. Don't know what to try next.

    Furthermore, I installed all drivers Lenovo & software for Windows 8 power management, but the typical Lenovo Power Manager with the thresholds of load custom does not appear on my computer. I have only access to the Windows default power manager. I don't know if the crib Lenovo Power just does not work on my computer or if Lenovo has not yet release a power manager for the X230T running Windows 8.

    Thanks for any help!

    Hello RSX:

    There was some discussion about this since the launch of Windows 8.

    This thread may be of interest to you:

    http://forums.Lenovo.com/T5/Windows-8/changing-charge-threshold-on-Thinkpads-under-Windows-8-without...

    and also this article on knowledge:

    http://forums.Lenovo.com/T5/Windows-8-knowledge-base/changing-charge-threshold-on-Thinkpads-under-Wi...

  • Satellite M100 - is a disabled firewire port saves battery power?

    Hey everybody

    I'm not so IEEE...
    If I disable firewire in Device Manager it will stop it and it will help save the battery?

    Hi Dmitrij

    I doubt that disabled firewire port will help to save the battery.
    If you want to save battery power, you should check the options and settings of Toshiba Power Saver.

    Check the HowTO document
    + How to configure my computer for optimal use of battery? +
    You can find it in the Forum s box HowTo.

    If you are using Vista, then I recommend that you check the Vista power settings.
    More details you will find in "HowTo" doc:
    + How to manage Windows Vista power management features? +

    See you soon

  • Tecra 8200: If I use the moniter decrease brightness battery power

    I have a laptop Toshiba tecra 8200, when I use it on battery moniter decrease brightness, I tried to adjust the power to the control panel settings, but there is no option for brightness (win xp)? anyone has idea how to adjust the brightness on battery?

    Hello

    If I remember right you can set the brightness of the display by saving settings. Please start Toshiba Power saver. Check the part runs on batteries. There must be some NORMAL called marker profile. Click details, and then click standby power mode tab.

    There monitor the brightness option. All the four options set at the maximum level. Now when you use your laptop on battery power the brightness of the monitor will be defined to the maximum level.

    Please test.

  • Lenovo x 240 battery observations and investigations [trendy not supported]

    Hi, have a few observations and questions about the 240 x battery. 1 have not really noticed before, but when you plug the charger, the news of support for internal and external battery should read "connected, charge '? 2. I noticed that the mine only has 1 (internal or external) that reads "plugged in, charging" while the other is not (plugged in, do not load)-I first thought once we're in charge, another would activate and fresh, but it's apparently is not. 3 have not really found the problem, i.e. the hardware or software. Sometimes it's the internal battery that costs, sometimes it is the other - I have two defective batteries? Is this a software problem? Here are the things I have tried/tested 1. I uninstalled the device drivers in the same device, rebooted - Manager. 2. install / re-installed the driver of lenovo power manager - nada. 3 tried to recharge the laptop while it is off - voltage and both got fully charged! Someone has the same problem? appreciate the advise / help and thanks in advance.

    Hello

    Thanks for the reply and my apologies for the late reply.

    Took the time to observe the laptop, but I guess I found my answer.

    It seems that the laptop is not simultaneous battery internal and external. Noticed it imposes outside first, then residents. Looks like that's how it really works. Fortunately for me not to send my laptop warranty or buy a spare battery.

    Thanks again and happy to be part of the community of Lenovo.

    See you soon and good new year!

  • Satellite C660 - WLAN disconnect battery power

    Hello

    I have a new C660 satellite which is a great wee machine, BUT every time I have to unplug the power cable wireless loses internet connection. Wireless is fine and precise of all parameters. I checked the that changed the power settings and they are defined to be ok on battery or power.

    But still I can't unplug the power cable without losing the warless connection. The modem is always on and functioning and still more strongly I can access other people's s wireless connections while being offline.

    Please any ideas?

    Thank you

    When you are using battery power book and use FN + F8 can you activate and deactivate the module WLAN correctly?
    Ave you checked the WLAN settings in the properties of the Device Manager (click here)?

  • Satellite A215-S4757 - battery life and the problem of cooling fan

    Hello everyone,

    I would like to ask a few questions abou my system: first, the cooling fan works in my view too often: almost without interruption, with brakes for 2-3 seconds. Is this normal?

    I have my laptop since last August and I think that it shouldn't be a dust problem, because it is too 'young' for this and I do not live in an apartment "dusty"...

    In any case, I think that the problem of "almost allways running fan" appeared about 2 months after I bought the laptop. I installed 'Speedfan' and I see 'HD0' temperature increases of 30deg remarks immediately after I have start the laptop, on 39deg after 1 hour.

    But the most curious is that so called "Core" temperature oscillates from the beginning between 45deg and 52deg! The fan starts each time the core temperature rises to 50deg and stops when the temperature reached 45deg. This behavior is normal?

    Is the normal temperature of 45-50deg? I use my laptop for browsing the Internet, emails, etc., no complex 3d games!

    The second thing is that the battery life is (and has been since the beginning) not spectacular: it lasts max. 1.5 hours with wireless use on, but normal laptop (don't play not DVDs or something like that). Is this normal? If so, is it because of the amd processor turion 64 x 2?

    Please help me with some tips / advice.

    P.S. I bought my Toshiba as I was travelling to the US (NY).

    Thank you much in advance.

    Conrad

    > I would like to ask a few questions about my system: first, the cooling fan works in my view too often: almost without interruption, with brakes for 2-3 seconds. Is this normal?

    I m an owner of a Satellite A210. It s similar to the A215. The A210 is a European model and the A215 belongs to the series of cell phones in the United States.
    I noticed the same thing on my A210, and I think that's a normal s behavior.

    > But the most curious is that so called "Core" temperature oscillates from the beginning between 45deg and 52deg! The fan starts each time the core temperature rises to 50deg and stops when the temperature reached 45deg. This behavior is normal?
    The 40-60deg CPU temperature is not unusual.
    The temperature could affect up to 70-80degrees by practicing a game. So Don t worry about the temperature.
    Cooling modules are controlled by the BIOS. Fan table is stored in the BIOS and it contains information about the limits of temperature and the use of cooling.
    If a certain level of temperature has been reached the cooling module begins to spin with a certain speed.

    Now, I would like to say a few words on the life of portable batteries
    Generally the duration of battery life depends on the use of portable computers.
    While playing games or watching movies the battery a lot faster.

    In any case, your laptop is equipped with high performance devices and AFAIK Vista was preinstalled on this series. The two factors (high performance CPU and GPU devices) + Vista OS need a lot of battery power. Vista needs of more resources for laptop like Win XP, and so portable computers equipped with Vista operating system run more short on battery such as laptops pre-installed with Win XP.

    Finally and above all he must know that there are different models more strong the battery with high * value of my would help run the notebook longer using the power of the battery.

    Hope I could clarify this issue.

    Good bye

  • Battery power... after I plug the charger on my laptop it will start loading but after like 10 seconds stops.what is it possible?

    I plug into the connection starts to load but after like 10 seconds it stops... the computer remains switched on with the charger but it does not load. What can be?

    Hello

    This should ask in answers - Forum Windows for your version of Windows.

    Answers - Windows Forums
    http://answers.Microsoft.com/en-us/Windows

    ======================

    References to Vista also apply to Windows 7.

    Check with support from the manufacturer of their books online and the drivers and their forums system
    (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
    problems.

    =================================================================

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    =================================================================

    Other information that might help:

    Control Panel control - plan change Options - power plans - power - advanced settings
    Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
    long to load).

    In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
    systems overload are not a problem.

    Here are some tips to help and troubleshoot battery issues.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have on line forums.

    New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Another good program

    Vista battery saver - free
    http://www.codeplex.com/vistabattery

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Battery meter: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

    Battery saver
    http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

    Solutions to common battery problems
    http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

    What is the precise the battery meter?
    http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

    ============================================================

    Try this - to make a Restore Point

    How to create a System Restore Point in Windows 7
    http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
    Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
    who will update the driver stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps.

    I hope this helps.

  • Touchpad problem - running on battery power, does not work when it is connected.

    Laptop Toshiba with Vista. The Synaptics touch pad battery power works fine. When it is plugged in, it freezes.  Disconnect the power supply and back to the battery and everything is fine.  That's happened?  How can I get the touchpad to work in both modes of power?

    I played with power options, and there is nothing specific to the touchpad.  Setting the power of USB has no effect either. This laptop (Toshiba A505 series) is up-to-date with all service packs, etc.

    Hi mravitz,

    You need to maybe uninstall and reinstall the Synaptics drivers installed on the system.

    Uninstall and reinstall the Synaptics drivers.

    a. Click Start, point to settings and then click Control Panel.

    b. double-click system click on hardware and then click Device Manager.

    c. expand the device, and then double-click the Synaptics driver.

    d. click on the driver tab and click on uninstall

    e. restart the computer and check

    Check out the link:

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer

  • I suddenly lost my taskbar battery/power icon

    Original title: the battery icon

    I lost suddenly from my bar battery/power icon tasks and cannot change the setting in "Turn system icons on or off.

    Any ideas?

    You can display the icons of the power-battery permanently in Customizing the taskbar [right click on the Windows icon, select Properties, select taskbar, select the Notification area customize].  Alternatively, you can decide to show only the icon notifications, so that the icon appears only when the battery level drops below what you have set in the power management.

  • Using HP Diagnostic and Win 7 HP PC system repair disc to another, even 0 s?

    A friend who has a more recent with Win 7 HP, HP nor his family know little about the period of the PC, has it completely messed. He asked me if I could fix it, to make a long story short, I can't access a large part of what. I couldn't find any Active safety system. Norton 360 trial expired, Windows Defender is disabled.  I can't access Windows Explorer or the control panel and Windows Update does not work... The list goes on and. I believe there is a major Virus in the machine by the way he told me he started acting about 2 weeks, he started when he was on the opening page after page line.

    It's funny, he thinks really that Microsoft took his machine and since he was on a Government web site (?) they are both after him!

    I told her that I need to run Recovery, probably destructive if I can't back up its files.

    I tried restoring the system to a point more a month, has not helped. I know that the first step is to get rid of the Virus, I was able to get Windows Defender working and updated, quick scan revealed nothing, and I had to start a full Scan him before I left.

    I know that if a mouth full, but here is my question... Can I try to use HP's Diagnostics and Win 7 HP system repair disc I created from my PC on his PC (same OS)? Just to see if it helps so I can get a security software installed and running before you run the recovery.

    Thanks Risingsun

    BORN OF NEW AMERICAN

    Hello

    You can certainly use the Windows 7 repair disc as long as it's the same version (IE 32-bit or 64-bit).  However, if there was a large number of malware on the PC, I would say that your suggestion to restore PC to factory settings may well be the best option as this reformatted the hard first of all - this way, you can be sure that everything has been cleared until the operating system is reinstalled.

    To perform a factory reset, there are 2 main ways. Either process will erase the data private so. 

    1. If your friend has created a set of recovery disks, insert the first and reboot the PC to start the process.

    2. Another way is to first shutdown the PC, and then tap away at f11 as soon as you press the power button and this should access Recovery Manager, which then allows you to reinstall the operating system.

    Kind regards

    DP - K

  • I still use a lot of battery power,

    I got a new 6sPlus to iPhone and it keeps using a lot of battery power, what to I need to change my settings?

    Go to settings/battery and see what is using energy.

  • Satellite P855 - 10G is low on battery power, even when it is off

    Hello world

    I bought the Toshiba Satellite P855 - 10G, but I m terrified because he is low on battery power, even when it is off...
    Anyone know how I can fix the problem?

    Best regards
    Igor Tarelho

    Hello

    Access the BIOS and disable options like: wake-up on LAN and keyboard.
    In Toshiba HW Setup I should disable the USB Sleep and Charge feature as well

    The two options enabled to discharge the battery, even if the device is OFF

  • Satellite Pro U500 - multi-boot with Win 7 and Win XP

    Good gentlemen,

    Please help me with this query I have.

    I just bought a Satellite Pro U500 with Windows 7 installed. I also have a TOSHIBA Windows XP product supplied with the laptop recovery DVDs. Was told I could downgrade to XP with the DVD.

    I want to install Win XP in addition to the existing installation of Windows 7 on a different partition, I intend to create.
    Can I create a create a separate partition and then use the recovery TOSHIBA Windows XP product DVD to install Win XP on it?

    Am just worried I might spoil the on the laptop's recovery partition?

    Basically, I want to be able to run the current Windows 7 and Win XP on my machine and want to know the best way to do it without damaging the existing TOSHIBA recovery partitions.

    I want to use the recovery DVDs TOSHIBA Windows XP product to install XP on a new partition with windows 7 OS.

    Thank you

    STRAPPING

    Hi-band,
    + downgrade to xp + means that you are not allowed to use your win7 installation any longer...

    ask problem "dual-boot":
    burn a DVD restore *, choose from the start menu

    After that, you can choose partition wich you like "sacrifice" for xp and install it...
    XP can't 'see' the install of win7, but you need a Boot Manager to boot both systems (xp is crushing the win7 boot code)

    or you go the other way:
    installation of xp and then install win7
    This has the advantage that win7 offers you the ability to boot xp from the bootmenu.
    in both options, you lose the hard drive recovery!

Maybe you are looking for

  • How do itunes stop asking for icloud

    How to make iTunes do not ask my iCloud password repeatedly? I don't have a password to iCloud, since I can not usually connected to the network when I use iTunes, so I don't care. Under system-> Internet Accounts preferences, iCloud is not listed as

  • impossible to clean - nothing happens press ctrl-u or button

    Dear users, I'm unable to self-cleaning my code in the block diagram. I was trying to reduce the code in VI (subVIs code transfer) and I realized later that I'm not able to clean up. He has worked previously. There is also an older version of the fil

  • application spoolsv.exe error.

    I have windows xp and I get the application spoolsv.exe error. It gives me the following message is displayed: the Instruction at 0x01fb0374 referenced memory at 0x1fed12c0 memory cannot be read. "I don't know what to do about this.  Help, please.  *

  • 41 DRIVER_IRQL_NOT_LESS_OR_EQUAL BSOD (iusb3xhc.sys) since February

    Hello. I had to deal with these BSODs for a long time now. They often occur when the computer is waking up from his sleep. I tried a number of things: Moving all my usb ports USB 2.0 devices Remove all devices (except keyboard and mouse) Reinstall th

  • Configuration VPN error easy need help

    using CCP 2.1 I tried to assign the IP to the new loopback interface, when I did a show ip interface br he showed the unordered interface Virtual-Network1 unassigned YES unset down down Loopback1 unassigned YES TFTP upward upwards Virtual-Template2 u