XboX 360 and Qosmio E10 - question on the Pal settings

Similar Questions

• Xbox 360 and Vista Media center (understand not found)

  I've looked everywhere I can think and have not been able to find an answer to this far (including the green button forums)

  After you run the transfer Assistant to move things to the Media Center and use as a desktop pc, the xbox 360 and Media Center cannot find the other and settings, I can see the xbox inside network but devices Media Center doesn't see it and I get the infamout (extender not found error).

  configuration is a wired connection via a belkin router, network configuration has not changed and the media center has been able to connect to the xbox previously, I tried several things so far

  -uninstalled onecarelive and disabled the firewall (one of the problems solved but are still unable to find the xbox)
  -reset the xbox to factory settings
  -check the firewall router so
  -installed all the updates that are known for pc and xbox including SP2

  Here's the event codes that I get when you try to configure the Extender, it shows correctly configured but yet I get the error not found "extender".

  * Information 2009-06-04 13:54:55 Mcx2Dvcs 400 none
  Windows Media Center Extender Setup successfully configured Windows Media Center PC for use with an Extender.*Information 2009-06-04 13:54:51 501 Mcx2Prov None
  Hersch began setup of Windows Media Center Extender with the following options: Firewall (0,0,1,1) Power management (0) media settings (1) * WARNING 2009-06-04 13:54:37 411 Mcx2Dvcs None
  Windows Media Center Extender Setup detected the following non-Windows Firewall: Windows Live OneCare Firewall

  disregard, I just fixed it... stopped the connection internet sharing service and was able to connect.

  for those who need to do this click on the Start button > right click on computer > click on manage the > on the left side of the window that opens click on services and applications > then select services > find the service "internet connection sharing" > right-click and select stop.

  some positions will tell to go to properties on the network connections page, but there was a tab sharing for mine

• My Xbox 360 update has been cancelled in the Middle until the update and is now glued to the screen saver.

  UPDATE XBOX 360 HAS CANCELLED IN MIDDLE NOW SA DOES NOT WORK

  I tried to update my xbox 360 to connect JOIN XBOX LIVE BUT MY BROTHER TURNS IT OFF BY SWITCH please TELL ME WHAT to DO. I'm blocked some how it's stuck to the xbox screen saver... Help, please.

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to the Xbox 360 and would be better suited to the Xbox technical support community. Please visit the link below to find a community that will provide the support you want.

  http://support.Xbox.com/support/en/us/NXE/default.aspx

• Thanks to the Xbox 360 with Qosmio G30 controller

  Hello

  I try to use the controller to xbox 360 with evo pro soccer 2010 on my laptop.
  As a first step, it flickered, but then it stopped.

  Drivers and everything installed correctly, is there another way?
  In Device Manager, there is no exclamation point, it seems fine.
  But the game won't play, unless I use the keyboard.

  Hello

  The controller is maybe defective.
  Have you tested on your Xbox 360 and it works?

  You can also test a different controller?

• Rumors of new device for xbox 360 that allows players to play the Kinect in less space?

  Will there be a new device for xbox 360 that allows players to play the Kinect in less space?

  Hello

  You will need to check with the XBox Forums.

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  XBox - Kinect
  http://www.Xbox.com/en-us/Kinect

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Xbox 360 and xbox running live of laptop and wireless modem

  I'm running as my Xbox 360 and xbox live since my laptop via an ethernet cable. The internet connection is done by '3' wireless dongle. It has worked well in the past - until recently.

  Whenever I try now - setting up my xbox can't get an IP address from my laptop.

  I was on the site of Microsoft for answers and xobx and I start to beat now. I watched CSI and as I can see - everyhting should work fine.

  I have Norton Internet Security and Windows Firewall as my security systems.

  Any ideas anyone?

  Thank you

  Hello

  Try a tooth to disable Norton and undo redo the ICS.

  http://support.Xbox.com/support/en/us/NXE/xboxlive/getconnected/hcxl/consharing.aspx

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• "the preferences file is corrupt and has been reset to the default settings" cs4 Mac

  Greetings!

  whenever I run illustrator that I encounter a new error.

  "the preferences file is corrupt and has been reset to the default settings."

  "the corrupted file is saved as Adobe illustrator Prefs.err".

  This problem that manifests itself after I added a few other .ai and .ase files in my directory of nuances. I think not changed nothing else.

  don't know how to diagnose the problem. is there a mode debug or something? Maybe a file in question.

  one option would be to try to remove each added file swatch or folder individually, but it would be a very tedious process for me.

  I use cs4 on a Macbook pro running Snow Leopard - 10.6.2 and would appreciate your advice.

  Thank you

  s

  s,

  Whenever you close Illy, the current preferences (which may have been changed while you worked on files) are recorded, and every time that you start Illy, these preferences will be used.

  Usually, corruption of preference probably appears randomly, caused by the operating system, but if something in your files to change preferences to something that is not viable, you will get an error like this.

  You can press Cmd + Option + shift during startup, which will replace the current preferences with the default values, and no doubt you you get rid of the error message. It is probably not a cure, however.

  If the error is persistent, the cure would be to get rid of things that are implicated in the files you are editing.

• When I open Illustrator I get an error: "the preferences file is corrupt and has been reset to the default settings. "The corrupt file is saved as: Adobe Illustrator Prefs.err.

  When I open Illustrator I get an error: "the preferences file is corrupt and has been reset to the default settings. "The corrupt file is saved as: Adobe Illustrator Prefs.err.

  Hello

  We have released an WINDOWS ONLY fix today that solves this problem of corrupted preferences. Go to the creative cloud application and download the patch CC 20151.1 (19.1.1)

  If you see not the patch in the creative Cloud application wait on or refresh cycle you can disconnect and connect to force refresh the list of available patches.

  Kind regards

  Ashutosh

  On behalf of the Illustrator engineering team

• Xbox 360 and Windows Media Center interfere with the operation of the Vista computer.

  Since the implementation of an Xbox 360 for the family to use, turning power switch and return to the dashboard caused Windows Media Center on the laptop family to turn on automatically, which, in some cases, interrupts programs and blocks computer. Sometimes the computer will be same turns on automatically when the XBox is turned on.

  I've done everything I can think of to stop the problem, including 'disconnect' XBox WMC in the "Uninstall" the XBox and the XBox settings in the settings of WMC. I do not anticipate using WMC in the near future, I just want to stop this crazy to happen.

  Thanks in advance for any help and please ask if you need more information on my problem.

  Hello ebduhamel,

  1. what type of connection you have between the computer and the Xbox, it's a cable or a wireless connection?

  2. is it to wake up the computer from standby or everything just stops?

  I suggest you try the steps below and check if you have the same problem.

  This could be possible only if media sharing is enabled on your computer.

  I suggest that you turn off media sharing and make sure you always have the same question:

  a. click the arrow below the Library tab, and then click media sharing.

  b. turn off media to find that others share and share my media to check boxes, and then click OK.

  By clicking OK, you confirm that you want to turn off sharing for yourself. You will also be asked if you want to turn off sharing for everyone who uses this computer. Note that if you let one of the selected check boxes, some sharing services may continue to run in the background.

  c. When you are prompted to turn off sharing for everyone who uses the computer, follow these steps:

  To make your changes apply to all users of your computer (including yourself), click Yes.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Gamepad Xbox 360 but not installed projection in the DM and will not work.

  I installed my xbox 360 controller. It has first been installed a few months previously and showed upward in Device Manager. then I disconnected and never used until today (or so I tried)... now it does not show in the SM, but you can hear the dingding when I plug in and when I unplug the unit, but nothing happens and I can't figure out how to get my pc to recognize it again. Please help... my console real xbox 360 should be disabled so that it works, or can I use it with my pc while the console is still? Help

  Hello

  Here are some steps that you can try before you contact the Xbox team.

  Step 1:

  Connect your Xbox 360 to the computer power turn it on and restart the computer to see if it is recognized by your computer.

  Step 2:

  Try to run Windows update on your computer, if there are drivers available, they will be installed and could help recognzing Xbox on your computer.

  Step 3:

  Check to see if you can recognize the device through other USB ports on your computer.

  For more information, see the article below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Also post your request in the Xbox forums.

  http://forums.Xbox.com/

  Concerning
  Anthony

• Qosmio F10: Question about the CD key and waste product

  I bought a laptop Qosmio F10 a year ago. However, it is only now, someone mentioned that is fails to my OS I will need to reinstall.
  They asked if I had the disc and product key. I said no. Why do not the two points mentioned above provided for me on buying?
  I'm just a user not an expert.
  All the answers at all would be appreciated.

  Hello

  It is strange that the laptop has been delivered without CD or DVD.
  Usually, you should get the media recovery, Tools & Utilities CD and possibly a Qosmio CD player.
  On the recovery CD, you will find the image of Toshiba. This image that you could install every time. The operating system on this image is already enabled and you don't need the product keys.

  If you don't have a CD you can order it from the service partner in your country.

• Problem with the Xbox 360 and WRT54GS

  Once from time to time, my Xbox suddenly will refuse to connect to the internet, even if he had worked for a few minutes to an hour. I'm going through all troubleshooting he tells me to do with the connection test, the MTU thing has always been higher than the minimum, even when the thing, it is not. For the first time, I got one for me to open up access to port 3074, and I can't find anywhere, I would. How can I do this?

  Nevermind, I figured it.

• Can I connect my Xbox 360 to Qosmio F50?

  I have a Qosmio F50 with me... and its got a VGA port... is possible to connect my Xbox 360?

  Hello

  No you can't connect the Xbox to the Qosmio F50 because the laptop does not support the video and at the port.
  All available ports sends the video signal and don't receive the signals as an external monitor or TV. So it is not possible to

• Xbox 360 and Windows XP Media Center Edition 2005

  Hello

  Hoping to get help with this, because I searched everywhere and had not found an answer.  All the work around the items, reference Windows 7 and 8 not XP my Dell Dimension C521 shipped with Windows XP Media Center Edition 2005 pre installed.  I've upgraded to SP3 of XP.  A friend of mine gave me his old Xbox 360 (bought a new unit).  When I try to connect to the XBox 360 I get an error message in media library "uninstall the update for media center 2005 and then re-install the update of the site Web of Windows update.  Then, re-run Setup for Xbox 360'

  I checked in my under settinds program control panel, but don't see any element for Media Center 2005, even with show checked all of the updates.  I don't see Media player listed and 2 updates for it.  I have disabled the Windows Firewall did not help.  The Xbox 360 test shows that I can connect to the internet, Xbox Live (no NAT problems) and PC running Media Center.  It fails on the media center connection test.

  I don't want to reinstall all of the Dell backup image software supplied with the camera, I'll have to back up and start over.  Any help is welcome!

  Thank you

  Matt

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  I suggest for the link and follow the steps in the article:
   
  Error message when you try to install a program for the Xbox 360 Media Center Extender in Windows XP Media Center Edition 2005 with Service Pack 3: "There is a problem with the installation of Windows XP Media Center Edition 2005"
  http://support.Microsoft.com/kb/954622?WA=wsignin1.0
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.
   
  Also see Help links:
  Turn your Xbox into Windows Media Center Extender
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Extender-for-Xbox
   
  http://support.Microsoft.com/ph/7024
   
  Windows Media Center on the Xbox 360
  http://support.Xbox.com/en-us/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Info
   
  I hope this helps.

• Gamepad Xbox 360 for Windows pc freezing when the vibration is enabled

  Anyone know a fix for this, whenever I have the vibration turned on for any game using the controller Xbox 360 for Windows (by cable), it freezes the game and I can't get my PC to respond again by disconnecting the controller.

  This occurs if the game supports natively the 360 controller or not.

  Games question until now:

  Dead Space
  Dead Space 2
  LIMBO
  Tomb Raider: Legend

  Deactivation of the vibration in one of these games feature solves the problem, but does anyone know a solution where I'd be able to use the vibration?

  The problem you are experiencing may be caused by the power of the amount needed when the vibration is enabled. I had the problem on my old PC, that when I used my controller, my sound would play as the speakers had holes in them and that the game would freeze-freeze-start. The Xbox 360 controllers use 500mA, which is over the limit that provides a USB port. With this audio device, a keyboard and a mouse together via a USB port, which is an aspiration constant quite heavy on the USB supply rail.
  I fixed it by getting a small USB 7 port hub which is outwardly the power (this is important) and plug my controller. This way he can draw the entire, there need without slipping down the USB ports attached to the motherboard. Just be sure it's a hub with an external power supply.

  SC Tom