Xbox 360 Media Center won't play Albums
I use my 360 as an Extender for 4 years. About 2 months back my hard drive of the PC began to fail. So I bought a new PC and recovered all my music on the new PC (old and new were running Win7 64 bit). I plugged the 360 as an Extender again. Everything (Live TV, Recorded TV, pictures, etc.) works perfectly. When I try to play music by clicking on 'Play the Album' I get an error box. "Audio error" "year Error Occurred while trying to play your selection. If I go in the album and click on any song and click on 'Play song' it works without error.
I tried to delete an album from the hard drive and ripping again and this album plays very well when I click on "Play Album". So, the question is not network settings or firewall or proxy, etc.. I have re - rip each album, but spoke more than 300 and I'd rather not spend this time. I guess that when I copied the files on the old PC Win7 something again has been or has been marked properly. So I reset the security and ownership on the files and there was no change. Individual files will be read, but the albums are not.
I should also mention that "Play Album" works fine on the Media Center PC.
So, the big question is, when you click on "Play Album" 360 Media Center Extender, which looks at the system and what it takes to be able to play the album successfully?
Hi Njohnson_2828,
Thank you for writing to Microsoft Communities.
The question you have posted is related to the Xbox 360. Please visit the link below to find a community that will offer in support of your application.
http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Windows-Media-Center
Future prospects for more questions
Tags: Windows
Similar Questions
-
Netflix in media center won't play anything
Original title: windows media center
Netflix in media center won't play anything, I can do
Hello
1 what happens exactly when you can play any video on Netflix? You get the error message?
2 How long have you been faced with this problem?
3. were you able to play any video on Netflix earlier?
4. you did it recent hardware or software changes to your computer before this problem?See the bottom of the articles that might help you.
Known issues and limitations of Netflix in Windows Media Center for computers that are running Windows 7
http://support.Microsoft.com/kb/977116Silverlight: Unable to play Netflix Silverlight videos; Error: 1001
http://support.Microsoft.com/kb/979004Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Now I have Windows XP Professional after the upgrade to Windows XP Media Center Edition Home 2005. Now my Media Center won't play DVDs and I keep getting the error message "Missing Component". I tried to reinstll cumulative update 2 for Windows XP Media Center 2005 that has worked for me the last time I had this problem, but now I get the Error Message "you must have Windows XP Media Center 2005 installed to get this download and it shows already on my computer as installed components. When I reinstalled it 3 years ago he corrected the problem of DVD. Help, please
Thank you for your help. Here are the answers your request:
"Windows XP Media Center version 5.1 Edition - this shows when I"run"- winver - ok.
Complete error message: "Missing Component - required component Media Center is.
missing. Please contact the manufacturer of your hardware.
KB article: WindowsXPMediaCenter2005-KB900325 - usa .exe
The windows of origin is always on display as shown above, but I received a free upgrade to Windows XP Professional CD and installed on my computer. And under 'Information system', it shows as - Microsoft Windows XP Professional 5.1.2600 Service Pack 3.This problem started about 10 days when I used the CD of XP Professional to correct a problem. My computer is a Dell Dimension 5100 and I have two CDs that were sent to me - Dell - Microsoft Windows XP Professional SP 3 and Microsoft Windows XP Media Center Version 2005 with update Rollup 2.
Thanks again and I ran the "fix it" you suggested but it have no problem found to fix. Every thing works fine on my system, but Media Center won't play DVD. It will play CDs and videos on my system.
The initial problem was that I could not download the Blackberry Desktop Software - updates needed. The computer came with Windows XP Media Center Edition Home and I use Internet Explorer 8 as my default browser. I also use Mozilla Firefox as my backup browser.
Please stick to your thread to avoid confusion of origin: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/i-have-upgraded-to-windows-xp-professional-and-now/f5245962-e9b4-4415-8aff-bc1d972f8120
Note that I asked you to MOVE your original thread on the forum of material WinXP, not start a new thread.
Also note that you don't have NO Windows XP Media Center Edition, installed now if you upgraded to Windows XP Professional.
PS: If "winver" still says Windows XP Media Center Édition, did you not correctly upgraded & something is not. Better contact the Dell Support on this issue (if they'll still talk to you).
-
Windows Media Center won't play DVD
Windows Media Center won't play DVD. This program has played these exact DVD in September. These DVDs can be played on other devices. Error message indicates that there is a problem with the decoder, but don't tell me the code of error message. I searched other forums, but it is impossible to find an answer to this problem, except the recommendation of a codec - although I don't know how I "lost" the codec in the month. Microsoft Security Essentials have installed and up to date, if it is not a virus. Have problems in other programs with the recognition of previously readable files. Not sure if it's related, so I'll post in separate... forums but I'll give you a link if you want to. Your help is greatly appreciated. Thank you.
Hello cowgurlup55,
In addition to the response of Santosh, please relay if the problem occurs when you play a DVD or a single. Please also relay if the same problem occurs when you try to play the DVD with Windows Media Player.
In addition, if you have an extra DVD decoder installed, then try to update the DVD decoding software.
For more information about MPEG - 2 DVD decoders, please visit the link below:
http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins
In addition, you can also view the thread below with a similar problem:
I hope this information is useful.
Thank you
Mary
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
How to use the NEW BLACK xbox 360 media center remote with Windows 7 Ultimate & Windows Media Center
I have the new Black xbox 360 media center remote and I can not understand how to use it with my PC to run windows media center. I'm running Windows 7 Ultimate x 64, and I also have the receiver wireless for my xbox 360 wireless controllers.
Here is a link to a better image of the remote control.Here is a link to my xbox 360 wireless receiver.I also have a mini receiver RF for a keyboard and a mouse if that helps somehow.I don't have an xbox 360, but I like to use my controller wireless for my PC games and emulators like the style and color of this remote it would go well with my current setup as well as with XBMC.If anyone knows or can help me to find a way to make this work I would appreciate it a lot.Thank youMichaelHi Michael,
Thanks for posting your question in the Microsoft Community.
The question you have posted is related to the Xbox 360 and it would be better suited to contact Xbox support to obtain assistance from the links below:
Contact XBox Support:
http://support.Xbox.com/en-us/contact-us
http://support.Xbox.com/en-us/browse?product=Xbox-360
I hope that the information above helps you.
-
Xbox 360 Media Center extender 545 error code
Hello everyone I thought I'd ask my question here as nowhere else.
The problem is, my xbox 360 has benn works fine it's just the media library.Whenever I try to add as an Extender happens to the part where it sets up my xbox and it says error and it can not set up my computer. So far, I have tried the part where you remove certificates and restarted some Services, but none of them worked.Under Event Viewer, he saidMedia Center Extender Setup cannot create an account for the extender with the ID: uuid:10000000-0000-0000-0200-0022483530EF.
Error: The system cannot find the specified file.If anyone can help me with this, it would be appreciated muchly, Spudals (Jake)PS. IM passing by a N1 Vision Wireless router, it worked before, so I don't think it's important.PPS. I tried on another laptop and it worked fine, this laptop also had windows 7.Hi Spudals,
Welcome to the Microsoft answers site.
I suggest that you allow the default Administrator and try to set up the media center extender, follow these steps:
To activate the default Administrator account, follow these steps:
1. Click Start and type CMD in the start search box
2. right click on CMD in the list and click "Run as Administrator"
3. type the following command: net user administrator / Active: Yes
If the problem persists, you can try to create a new user account and the extension of configuration and check, if it works fine, then it could be a problem with the user profile, follow the steps in the link:
Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile
Check out the links below and try to set up the Xbox as of Media Center Extender.
Set up a Windows Media Center Extender device: http://windows.microsoft.com/en-us/windows-vista/Set-up-a-Windows-Media-Center-Extender-device
Connect your console to the Windows Media Center: http://support.xbox.com/support/en/us/nxe/xboxlive/troubleshooting/NetworkHelp_mcxpc.aspx
Enjoy Windows Media Center on the Xbox 360 with your music, photos, Live Recorded TV and online media: http://www.xbox.com/en-US/pcsetup/MCEWindows7.htm
Windows Media Center with Xbox 360 media sharing: http://support.xbox.com/support/en/us/nxe/GamesandMedia/SharingMedia/MediaCenter/ShareMediaFromMediaCenterPC.aspx
Demo: setting up a console Xbox 360 as an Extender for Windows Media Center unit: http://windows.microsoft.com/en-US/windows-vista/Demo-Setting-up-an-Xbox-360-as-an-Extender-for-Windows-Media-Center
Solve problems with a Windows Media Center Extender device: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-a-Windows-Media-Center-Extender-device
You can also try to temporarily disable the security firewall and check.
Also make sure that network discovery is turned on.
Control Panel\All Control Panel Items\Network and sharing Center\Advanced sharing settings
Make sure that network discovery is turned on.
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: the xbox 360 Media Player plays more music after I upgraded my CPU
I have Vista 64 SP2. The service runs for 5 seconds and then I get the message that she stopped. He was works well for years (my Xbox 360 sharing), I'm guessing he stopped a few weeks ago after I put in a slightly faster processor. I watched a some tech posted and tried to run the program which seeks the corrupted system files, but the only files that it could not pay had to do with the sidebar Windows. I have removed and put back my media extender, I thought that it worked because I've seen (from my xbox) miniature images, videos and music counting upward, as they have been added and I could see them. But if I take one he freezes for a few seconds and then says the media sharing service took end (or something like that). Then, I go to my PC and see that it stops. I can restart, but it only lasts for 5 to 10 seconds.
I also say a post about deleting files in C:\Program Data\Microsoft\DRM, but I have all the files in there. Just a server folder empty.
Hello
Step 1: Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Measures to check the application event log:
a. Click Start.
(b) in the search box type eventvwr.msc, and then on enter.
c. now, click Application in the event viewer (local).
d. now, looking for event log on the right side of the event viewer window.http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer -
Windows Media Center won't play video, but Windows Media Player will be?
I'm reading a video .avi with the xvid codec. I installed the codec earlier and it plays fine in Windows Media Player, but when I try to play in Windows Media Center, it indicates that one or more codecs are required to play this file, but they cannot be found. I know I would just watch with Windows Media Player instead of Media Center, but I want to watch it on my Media Center extension (my Xbox). I'm running Windows Vista Ultimate, 64-bit. Why does Windows Media Player with this codec and Windows Media Center not work? How can I solve this problem?
-Slick05_1
Hi Slick05_1,
Thanks for the replies on the forum.
Given that the Microsoft Vista Media Center and XBOX do not play the files suggest it would need to be a codec which solves the problem or maybe file conversion which would solve the problems you are experiencing. Since the codecs for files is not something written by Microsoft, we do not have the information for that in our system.
What I suggest is to go to your search engine preferred and in the search line and typing "is possible to play VLC on XBOX.
WARNING:
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
What I suggest also done an online search using your favorite search engine for "play MKV files in Vista x 64 Media Center" to find whether there may be suggestions about codecs or these codecs created by other organizations then Microsoft.
Please let us know if you are able to get this to work for you.
Best regards
Debbie
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have a Windows 7 Media Center box, and an Xbox 360 that I use as an Extender. The two connections to the same wired router. Everything worked fine until I went on my old router (failed) and put in a WNDR4300. After the new router has been installed, I didn't have the Extender work then, deleted from the media Center and re - he added. It worked but after I shut off/started the xbox, no link. It is repetitive: I can make a new connection, but then it didn't reconnect after reboot of the xbox.
Check/change:
-J' changed to a static IP xbox
-There is no part 3 a / v or a firewall on the support center
-L' on the media center network adapter is 'home '.
-The network card on the media center * fact * show the xbox 360
-The event log after the xbox is restarted shows:
event ID 538: installation of media center extender does not like the Extender has been detected on the network, but for the Extender upnp search failed (timed out after 20000ms)
-How long before it, I have found that the service IS running upnp device host (and set to auto)
-J' checked 4300 router wndr and UPnP is enabled (advertising set to 30 minutes)
question, any ideas what configuration will solve this problem?
Hello
I suggest to look and ask here:
https://support.Xbox.com/en-us/browse/Xbox-360?XR=shellnav
http://www.thegreenbutton.TV/forums/
See you soon,.
J
-
Media Center won't play a television channel after the installation of the station a new transmitter
KVTV channel 11 in the region of. Worth installed a new transmitter and everybody says when rescan their tuners. All work except the media center. When you go to edit channels channel 11 is listed, but on the side it says (special temporary authorization). Anyone can shed some light on this?
see if this subject helps you allBarbMVP - Windows/entertainment and connected homePlease mark as answer if that answers your question -
Windows Media Center won't play movies or videos.
Windows Media Center
problems began with the shifting of the wmc vedeos vedios. now his habit get worse let me do something hardy
What type of video file you are trying to play in WMC?
Supported video files: -.
http://Windows.Microsoft.com/en-us/Windows7/file-types-supported-by-Windows-Media-Center
-
Media Center won't play the .wtv files
Windows vista 64-bit with amd processeor will not play the .wtv files in media center. play dvr.ms file very well.
But if I try to read a .wtv file I get nothing.Have you installed PlayReady DRM? This is required to watch WTV. Never underestimate your own stupidity.
-
Media Center won't play recorded video
All my recordings are protected recorded video HBO on my hard drive of the PC. When I read them to my PC using Windows Media center only monitor, all play. When I use a USB to HDMI converter directly to my TV, some of them play, but some give me the error "display drive errors: video playback device does not support protected content playback. Since it is a direct connection to my TV from my PC where are stored the videos, I don't understand why this is not allowed. Is anyway to get Media center to recognize this device? Is there another device that works? This can be corrected. Do I have to use an Extender?
On Fri, September 12, 2014 13:57:20 + 0000, CharlesHickox wrote:> No matter if I unplug my monitor and try to use this device as my monitor or start without the device and plug it in then. It should work as there is a direct link from my PC to the display device. In this case, it should act as an Extender. Can this be fixed by retrieving recognized firstlyCharles, I looked towards the top of the map that you said that you used in the first thread youstarted earlier this month. There is no indication thatHDCP is consistent.I read a few pages of the magazine for this device on Amazon. Most peoplewho looked at it to use it as a monitor. A few people mention a messagenot HDCP.I don't have any other "answer" for you. I'm sorry.__________________________________________________________________________________________________BarbMVP Windows Entertainment and connected homeMy Blog - http://digitalmediaphile.com/Please mark as answer if that answers your question -
I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor. What is the problem? Can it be fixed? I use questions cable 'Câble questions SuperSpeed USB 3.0/2.0 to HDMI/DVI for Windows and Mac up to 2048 x 1152/1920 x 1200' with windows 7. Is there another brand and model that works?
On Wednesday, September 3, 2014 13:19:09 + 0000, CharlesHickox wrote:> I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor.I assume you mean WTV and not the WMV files? Likely the reason is that the adapterquestions of cable is not HDCP compatible. (Rules of DRM Media Centerapply).__________________________________________________________________________________________________BarbMVP Windows Entertainment and connected homeMy Blog - http://digitalmediaphile.com/Please mark as answer if that answers your question -
UPnP search fails when adding Xbox 360 Media Center Extender
First of all, I spent a week looking for a solution to this so if I missed something obvious, I apologize.
My xbox has been connected as a media center extender to this combination of the computer and the router for several months now. The router is a WII-HP-G300NH Buffalo. Earlier this week the media center extender was having video playback problems. After restarting the computer, the Extender was is no longer connected.
When I try to add a new extension unit I get the message "unable to add extender. Microsoft says to activate upnp and multicast. Check. Reflashed firmware dd - wrt. No luck. Back to buffalo firmware. No luck. Try an old Linksys WRT54GL I hang out. No luck.
The event recorder has this error: "Media Center Extender Setup has failed as the Extender has been detected on the network unsuccessfully searching for UPnP for the Extender (timed out after 20000ms)." Event ID: 538
Now, I did everything I could find on the activation of network discovery, anything allowing to access media and these. Network and sharing Center is located about large open. I also tried switching between home and work networks.
That said, I decided to check and see what updates have been installed. It turns out that an update has been applied on the day, that I started to have problems. It is said that it can not be uninstalled. Description Windows 7 and Windows Server 2008 R2 installation software item updated
Note: I have no system restore points. Small SSD and has not taken the time to understand how to save elsewhere.
That's all the information I have. I convinced myself that it is not the router via the steps described above and that it is something to do with the computer. Help?
FIXED.
Reinstalled NIC drivers.
Maybe you are looking for
-
Strain of sequence or sub for Multi users
Hi, we have several users who work on a project in TestStand. Each eng must implement a different routine and finally, we should be able to import each sequence to the list of sequences. I would like to know what is the best approach. each eng work o
-
Windows Live Photo Gallery does not load. Receive the message "WLXPhotoLibraryMain.dll cannot start. "Error code: 0x800736b1" what should I do?
-
Impossible to update error Windows could not search for new updates code: 8024A 000
Original title: Windows does not run updates, error 8024A 000 When I try to launch updated, I get the error msg could not windows search updates 8024A 000?
-
Noticed the message retention minimum was 15 days, to save less. Unable to find the option to perform a number of 7 days... Any suggestions? Thank you
-
I can passthrough Haswell Integrated GPU?
Hi allis it possible to passthrough the GPU integrated HD4600 to an i7-4770 to a virtual machine? Or any other Integrated GPU of a CPU Haswell?And if it is the only graph in the system, ESXI continues to run without its console?The Council would be a