Xbox 360 NAT issues?

Similar Questions

• Xbox 360 - NAT open on a WRT160Nv3 HELP!

  I recently bought this router and I have big problems with connecting to Xbox 360 games. My NAT is moderate and it pisses me off because I can't find a solution to this. Please someone post a SOLUTION to this problem. The details please. I'm tired of throwing from parts and to be the only slow one with a connection.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  On the Configuration tab change the size of the MTU to 1365, then click on save settings... Click the 'Administration' tab and disable the UPnP option and click on save settings...

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...

  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  (3) click on the status tab, and then note the DNS1 and DNS2 addresses...

  (4) Goto the XBox network settings and IP address settings, select manual IP settings and assign the following operations on your XboxIP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...

  (6) turn off your modem, router and Xbox... Wait a minute...

  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

• WRT54G2 show me customers & xbox 360 lag issue

  I just got a wireless router WRT54G2 about 2 days ago, and after having switched from Netgear, I badly due to find some settings.

  I have 3 computers on my network and 1 Xbox 360. One is one laptop (WiFi), the other 2 desktops (directly connected).

  They do not appear in the DHCP Clients. I get lag issues on my Xbox 360 and I want to see if its using the IP address I posted, since I'm portforwarding. I decided to go ahead and manually configure all computers to have a static IP address.

  If the DHCP Clients cannot be resolved, is there another way to see that if the Xbox is using the IP I assigned it?

  Triple post, oh gosh. I fixed it, well done linksys. I just updated the firmware, I just bought it didn't this necessary update already! But Portforwarding and UPnP are on, if all goes well no conflicts!

  Thanks for your GENEROUS response. :]

• 8 of Windows and Xbox 360 connectivity issues

  Since the update to Windows 8, I'm having problems with streaming of media to my Xbox 360.

  Previously, I had windows 7 and has been able to stream multimedia content (movies and music), or via the Media Center windows, or by connecting to my PC via the Xbox drive and folder navigation.
  Since the update to Windows 8 Media Center not connecting, he used even together upwards. I enter the 7 digit code set up and my computer says it cannot establish a connection. I tried to connect to my PC through the Xbox and when it can not connect.
  In the list of devices, the Xbox is displayed and even so capricious it shows that the Xbox is online and I am able to stream on my 360 using the video app and selecting "send to device" and selecting the 360. Unfortunately, this will randomly cut everything playing and yesterday would not work?
  I am running windows 8 Pro 64-bit with media center installed. I am connected via WIFI to my router, but my Xbox 360 has a wired connection
  Please help, I'm getting so frustrated that I spent a fortune on upgrading my PC and OS lose all the features, I already had
  Thank you very much

  Copy and beyond music in your cloud files, this makes select all your music and right click on the files you want to play or your xbox. Scroll down and select the option 'include in the library', and then click music.

  As says Peteanon go to windows medial player and make sure that the name of your xbox is checked, and then click Next until you get a password to get into your local network share there are three pages. When you reach the last click on print password and instructions. Follow the instructions on how to configure a password sharing between your xbox and pc.

  for the last two days that I had a connection problem after that I followed this method my music perfectly.

  Note: I have an xbox 360 and I am sure that it will work with the xbox one, but it should make note.

• Communication issues in Windows 7 with the XBOX 360

  I also have the problem of my windows premium 7, refusing to talk to my xbox 360...< not="" the="" controller's..="" it="" talks="" to="" them="" fine="">

  But the Xbox itself on the other side ot the network...

  So please don't tell me to install controller drivers...

  Really do not do...

  Yes, I've read hundreds of times people have asked this very question.

  To always have the microlimp people answer with «just install the controller driver and everything'll be fine...»  You want a pill with this useless response? »

  My very expensive windows 7 gaming machine speaks to everything perfectly. Everything there is certified to work with windows... Nothing is no name made in China...

  And apparently the xbox slim is certified...

  Then why they will not speak to each other...

  The windows updates did not have a pilot.

  I tried the controller driver... It did not help at all...

  So please don't just tell me to install the controller driver...

  And maybe think about why we shouldn't just scrap xbox and get a media center that works?

  Hell I already used my Roku as well as the xbox...

  He and my windows machine 7 talk to each other with happiness...

  Original title: windows 7 driver driver to talk to an xbox 360.  Do not use the controller with a windows machine...

  Hello

  Thanks for the update on the issue. The query you requested is best suited to be posted on the Xbox forum. He is watched by other computing professionals who would be more likely to help you.

  Forum on the Xbox:

  http://forums.Xbox.com/xbox_forums/default.aspx

  Hope this information was useful.

• Issue of controller Xbox 360 (PC connection)

  Greetings all I am new to any connection my Xbox 360 controller to my pc and ive met some problems, Ive downloaded the necessary drivers and programs for my controller 360 to connect to my pc but when I connect my conroller Xbox 360 Usb charger supplied with the controller wireless controller wireless, it does not pick up there. When I hit the guide button it goes right on my xbox 360

  Great thanks for the help everyone. Looks cause im going to have to go buy a wired remote, I have a problem with my wireless controller where it does not load (when I conect the charger in the light control will be red for about 30 seconds then green shift, saying that it is charged when it is not.)

• Need to retrieve the password for Xbox 360 Windows Live ID.

  Original title: password retrieve

  In my xbox 360 windows live ID, I have my password and it was removed, I have to contact microsoft windows but nothing.what do I do?

  Hi ElvisKiekebosch,

  ·         Remember to make changes to the computer, after which the issue started?

  ·         What operating system is installed on the computer?

  ·         You get the error message?

  Try the steps from the following links and see if it helps:

  Error: The e-mail address or the password entered is not valid

  The Windows Live ID management

  The problems of connection to your Xbox LIVE account

  I hope this helps.

• Xbox 360 or Xbox 720?

  I'm planning on getting the Xbox 360 but then I realized how long his out and discovered the Xbox 720 would come out very soon. So should I wait for the Xbox 720 or just to get the Xbox 360?

  Hi Geoffrey,.

  Please go to the Microsoft Community Forums.
  This query would be better suited in the Xbox forums.
  Please visit the link below to find a community that will support what ask you:
  http://forums.Xbox.com/xbox_forums/b/default.aspx
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• power light is solid then blinks when it is plugged into the xbox 360

  power light flashes

  Hello

  You will need to contact XBox support for this issue.

  Directory of Xbox Forums - Xbox.com: http://www.xbox.com/en-US/forums

  Contact us - Xbox.com: http://support.xbox.com/en-US/contact-us?xr=footnav

  Xbox.com: Solve common problems: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

  Concerning

• Gamepad Xbox 360 recognized as "Not specified" point in Control Panel ", as opposed to game controller"

  OK, I followed the appropriate for a Xbox 360 controller installation procedures, obtained the file from the internet site http://www.microsoft.com/hardware/download/download.aspx?category=Gaming&type=Gaming&sku=JR9-00001, and I installed it as indicated. It is not recognized as a game controller and now, not able to be used. I'm trying to use it via plug-and-play (hooked to a USB 2.0 port) so he could appear, but it won't work, period.

  While you're right on this issue technically belonging here, multiple threads exist and get more answers on this controller for the PC more on these forums.

  I'll try to post here: http://forums.xbox.com/9/ShowForum.aspx
  as well. It certainly won't hurt to get out your problem to the largest now it will be? ;)

  One of the suggestions I've read was to try another USB port and try the steps listed here: http://support.microsoft.com/default.aspx/kb/906347

  Good luck.

• Xbox 360 how to change family settings

  How do you change the Xbox 360 family settings?

  How do you change the Xbox 360 family settings?

  Hello

  You will need to contact XBox support for these issues.

  Directory of Xbox Forums - Xbox.com: http://www.xbox.com/en-US/forums

  Contact us - Xbox.com: http://support.xbox.com/en-US/contact-us?xr=footnav

  Xbox.com: Solve common problems: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

  Concerning

• Xbox 360 wired controller not recognized by my PC.

  I'm having a problem with my Wired xbox 360 controller (it's a fightpad street fighter 4 if it makes a difference). Since I upgraded from windows vista to windows 7 the controller worked normally, but after I did a Microsoft Update, its not to recognize the controller, and it gives me an error code 43. I tried to download accessory software for the controller, but it is not helping the problem at all, AFAIK. Any comments would be much appreciated thanks.

  Hi Persianguy,

  Welcome to the Windows Vista answers Forum!

  Error code 43 occurs if the drivers controlling unit notified the operating system that the device has failed in some way. You will need to update the drivers for the device.

  Step 1

  Use Windows Update to find a device driver

  Note To use Windows Update, you must be connected to the computer as an administrator. To verify that you are connected to Windows with a user account is an administrator on the computer; Visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/GP/Admin (http://support.microsoft.com/gp/admin)

  Follow these steps to use Windows Update to find a device driver:

  1. click on start toreduce this includes this ima, click all programsand then click Windows Update. Reduce this includes this imaIf that you are prompted for an administrator password or a confirmation, type the password or click continue.

  2. click on check for updates.

  3. to determine if updated drivers are available, click view available updates.
  If updates are available, click the driver you want to install and then click install. The collapse of this that i top

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  If Windows Update is unable to locate the required device driver, contact the device manufacturer to download the latest Windows Vista device driver.

  Step 2

  Uninstall and reinstall the device drivers

  If no exclamation point appears next to the name of the device and the device is not working properly, uninstall and reinstall the drivers manually. To do this, follow these steps:

  1. click StartCollapse this includes this ima, type device manager in the start search box and press ENTER.

  2. click on continue. The Device Manager dialog box appears.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click on continue.

  3. in the list of device types, click the type of device and look for the specific device that is not working.

  4. right click on the device and then click Properties.

  5. click on the driver tab.

  6. click on uninstall.

  7. click on OK.

  8. in the Device Manager dialog box, click the Action menu and click Scan for hardware changes.

  o you may receive a message indicating that Windows needs to install driver software for your unknown device. If you receive this message, click search for and install driver software (recommended).

  o you can also receive a message that States that a hardware device is being installed and that the device not installed is present in Device Manager.

  Note: If you do not receive a message or the hardware device is not installed, go to step 3, "Use Windows Update to find a device driver."

  For more information, visit the below given link:

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista

  http://support.Microsoft.com/kb/948187

  Article, it is applied after the installation of the Service Pack, but it applies to your question as well. Who should take care of your issue.

  After completing all of these steps, check to see if you still get the same problem.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• E-mail/password reset for an xbox 360. Windows Live support is me misleading to their moderators, etc. I need some help here!

  I need a password reset on an old e-mail account linked to my xbox 360. (the enamel of related Xbox Live account). However after going around in circles with the xbox and Windows Live support person will help me. I have provided more than enough evidence that its me (old/new address, debit card info AND xbox console ID AND serial number for information). And I am NOT to START a NEW GAMERTAG due the fact that I have spent money under my current gamertag. Now they are misleading me to the moderators of Windows with this problem. So now what?

  E-mail bellsouth.net and its related help/support page has since been purchased, reformatted and dissolved for their new name like ATnT. Their support tech/operators won't help me as well since it is a problem of bellsouth and not an ATnT. But the email is bellsouth.

  I can't do any kind of password reset because I forgot my secret question answer. A mistake in good faith, but one that keeps this issue to be resolved. I have provided a list of answers to him but still no help and I keep getting turned down and rejected.

  Windows answers forums are for technical problems and we do not have any control over the resets password for all Windows, XBOX and Windows LIve accounts.

  You will need to contact Windows Live Support as Kim said.

  http://windowslivehelp.com/product.aspx?ProductID=15

  Thank you

• How to put pictures on my xbox 360 using a usb cord

  How to put pictures on my xbox 360 using a usb cord

  Hi Shane carrel,

  The Xbox 360 does not support downloading pictures from a USB cord or USB devices. You can only view photos; You can download them on the console.

  For more information on this issue, I suggest you contact the Xbox 360 forums.

  http://forums.Xbox.com/

• Xbox 360 questions (Modern Warefare 2) online

  Hello, I request assistance with my Xbox 360 and Windows 7 online game, I would ask on Xbox.com, but they may not appear too willing to help.  Anyway, I recently had the home edition of Windows Vista, and my online game has worked very well.  I then upgraded to Windows 7 and everything went downhill.  After playing MW2 (Modern Warfare 2), I click on finding a match, it works generally the first few times, then after I exit a game, he finds no match.  Sometimes, it works just after that I have first turn on my Xbox!  Sometimes a friend can't join my games, or the Xbox Live party!  I have forwarded ports 53, 80, 88, 3074' on the port protocol.  My NAT type is (open) and I have my size MTU to 1365.  I did everything that I've seen other people say.  It is that I did not did nothing that everyone says to do.  I sent my Xbox IP port, have all the correct information, the function "Test Xbox Live connection" my Xbox Live is "on" no NAT problem.  I have my connection to the Local network and my connection Wireless Bridge.  I'm running Windows 7 Ultimate.  I tried to restart my router and restore to the factory settings.  If there is anything that I did not, please tell me.  I also uPnP 'Active '.

  Thanks in advance

  Brandon

  Hi Clayd26,

  This question seems to be better suited in the games forum. Please post your concern in the forum proposed below.
  http://www.Microsoft.com/games/en-us/support/pages/default.aspx

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.