Xbox 360 wired controller cannot find drivers

Similar Questions

• Cannot install drivers for xbox 360 wired controller.

  Original title: How can I install my controller wired correctly?

  I'm trying to install the drivers for my xbox 360 wired controller, that I bought from Gamestop on my Toshiba Qosmio x-870 running windows 7 64 bit. When I plug the controller into the usb port, the drivers are automatically downloaded, but for some reason any cannot be installed. I tried the driver downloaded from the Microsoft Web site software. I also tried to uninstall the controller and try again. Any advice?

  Try the controller on another computer and see if it works, or take the controller back and exchange it for another.

  I have one on my computer and installed Windows 7 drivers automatically when I plugged the controller works fine.

• Xbox 360 wired controller for PC

  Hello

  4 months ago, I bought an Xbox 360 wired controller for PC, I use it since a few games, but especially of the Fifa and recently, when I connect to 15 of Fifa, it detects 2 controllers instead of one and the controls were reversed as, as 2 controllers 1 controller-controlled and I can't fix it ,

  I already reinstalled the drivers, put it in the other USB Ports and I started to wonder if it's because of my windows, perhaps as an error that detects how, I would be very grateful if anyone knows a solution for this problem

  Thank you

  Hello

  The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
  If you need to contact them.

  With the help of the joystick Xbox 360 for Windows
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Info

  Set up your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Setup

  Troubleshoot your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help

  For most of the problems of Xbox:

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  Opening hours: 600 PM 2200 h / Pacific / daily

  International (direct line in the U.S.): 425-635-7180

  XBox LIVE - Service status
  http://support.Xbox.com/en-us/Xbox-Live-status

  Manage the XBox Live account
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

  XBox Live Sign-in problems
  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  Xbox - Feedback
  http://Xbox.uservoice.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows compatible xbox 360 wired controller

  Purchased windows compatible xbox 360 wired controller this seller assured me would work under Vista. But apparently not.
  I downloaded the latest driver suitable for the material and installed according to the instructions (with controller unplugged) but still no joy.  I have Vista Home Premium.  The controller is recognized and responds in the calibration utility, but doesn't seem to work for the games. Is it compatible for Vista and Modern Warefare 2?  Are only some supported games? If I lost my time & or silver?

  Only some games support a controller.  Most of the games, including pulling just support a mouse - frankly because it's much better to use a tiny stick.

  If his work all in calibration tools then the controller is working properly, unless the cod has an option somewhere to allow a controller then it probably does not support one.  His place to decide what methods of control that they want to support the game developers. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Xbox 360 wired controller not recognized by my PC.

  I'm having a problem with my Wired xbox 360 controller (it's a fightpad street fighter 4 if it makes a difference). Since I upgraded from windows vista to windows 7 the controller worked normally, but after I did a Microsoft Update, its not to recognize the controller, and it gives me an error code 43. I tried to download accessory software for the controller, but it is not helping the problem at all, AFAIK. Any comments would be much appreciated thanks.

  Hi Persianguy,

  Welcome to the Windows Vista answers Forum!

  Error code 43 occurs if the drivers controlling unit notified the operating system that the device has failed in some way. You will need to update the drivers for the device.

  Step 1

  Use Windows Update to find a device driver

  Note To use Windows Update, you must be connected to the computer as an administrator. To verify that you are connected to Windows with a user account is an administrator on the computer; Visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/GP/Admin (http://support.microsoft.com/gp/admin)

  Follow these steps to use Windows Update to find a device driver:

  1. click on start toreduce this includes this ima, click all programsand then click Windows Update. Reduce this includes this imaIf that you are prompted for an administrator password or a confirmation, type the password or click continue.

  2. click on check for updates.

  3. to determine if updated drivers are available, click view available updates.
  If updates are available, click the driver you want to install and then click install. The collapse of this that i top

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  If Windows Update is unable to locate the required device driver, contact the device manufacturer to download the latest Windows Vista device driver.

  Step 2

  Uninstall and reinstall the device drivers

  If no exclamation point appears next to the name of the device and the device is not working properly, uninstall and reinstall the drivers manually. To do this, follow these steps:

  1. click StartCollapse this includes this ima, type device manager in the start search box and press ENTER.

  2. click on continue. The Device Manager dialog box appears.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click on continue.

  3. in the list of device types, click the type of device and look for the specific device that is not working.

  4. right click on the device and then click Properties.

  5. click on the driver tab.

  6. click on uninstall.

  7. click on OK.

  8. in the Device Manager dialog box, click the Action menu and click Scan for hardware changes.

  o you may receive a message indicating that Windows needs to install driver software for your unknown device. If you receive this message, click search for and install driver software (recommended).

  o you can also receive a message that States that a hardware device is being installed and that the device not installed is present in Device Manager.

  Note: If you do not receive a message or the hardware device is not installed, go to step 3, "Use Windows Update to find a device driver."

  For more information, visit the below given link:

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista

  http://support.Microsoft.com/kb/948187

  Article, it is applied after the installation of the Service Pack, but it applies to your question as well. Who should take care of your issue.

  After completing all of these steps, check to see if you still get the same problem.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why is my xbox 360 wired controller can not be detected in Windows 7?

  My wired controller xbox 360 is not specified and is not detected in the Device Manager section. Tried troubleshooting, but it says that I have does not have a driver for the controller, although I did installed and downloaded from (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows). I downloaded the software and the driver depending on the operating system of my laptop. In addition, there is a system message and Security / Action Center, saying that "your xbox 360 accessories has been blocked from running because it can prevent your computer from starting correctly in the future".

  Please help as soon as possible.

  Fixed it :)

  This is what I did: -.
   
  1) click on your Windows icon in the lower left corner, and then right click on computer
  2) go to properties
  3) click on Device Manager
  4) double-click the device not identified by a yellow highlight and more icon it
  (5) choose 'pilot' and click on Update Driver
  (6) to browse my computer for driver software
  (7) choose "Let Me pick from a list of drivers for devices on my computer.
  (8) find the Windows common controller (Microsoft Common Controller) for Windows class
  9) click on Xbox 360 Controller for Windows
  (10) there will be an update driver WARNING out on the screen
  11) click Yes

• Xbox 360 wired controller not recognized not no more usb

  My wired Xbox 360 controller used to operate very fine and dandy when I used to connect it to the usb port. It would recognize that the controller was plugged. All of a sudden he stopped to recognize my controller even when I plug in the usb port, the LED flashes once, but it does not even recognize that a controller is plugged. It doesn, t even make his acknowledgement that the controller got plugged. But the usb port recognizes the other thing I plug into it.

  Hi SammyLopez,

  Welcome to Microsoft communities. The problem description, I understand that you are not able to access controller Xbox360. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message? If Yes, what is the full error message?

  ·         The question is limited to this device?

  Follow these methods.

  Method 1: Try to use the USB device to a different USB port and verify.

  Method 2: Try to use the USB device on another computer.

  Method 3: Follow the steps in the article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  Let us know if you need more assistance.

  Thank you.

• XBOX 360 wired controller not working not with my Xbox but works on another Xbox

  Problems with my xbox wired controller.  When I plug it into a usb port it flashes once quickly and turns off.  I tried to use it with other boxes of xbox 360 and it works very well.  I did all the troubleshooting steps and the wireless remote we have works very well.  We sent the box to Microsoft 2 times already because of the same issue.  both times he worked for a short period, then stopped working both times.  I don't want to send it back again so please Help!

  Hi Brian,.

  If the controller is working on other computers, then it's a problem with the USB port to which you connect the Xbox to.

  Well want to try plugging it into a different port and check.

  Try the steps from the link

• My PC detects the Xbox 360 wired controller, but the buttons do nothing

  I checked in the control panel of the wired Xbox 360 controller and it detects all the buttons but it does not move the pointer when I use gamepads, and when I press the buttons, they do nothing. It does not work in games. Why? What I have to disconnect the keyboard and mouse? I also have the Wireless desktop 3000 connected.

  Hello

  I suggest you to update the driver for the controller and check if it solves the problem.

  Method 1:

  You can see the following article from Microsoft to update the driver for a device that is not working properly.

  Updated a hardware driver that is not working properly

  
  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN

  Method 2:

  If the problem persists, I suggest also you to run the hardware and devices Troubleshooter and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists I suggest you refer to the items listed below.

  With the help of the joystick Xbox 360 for Windows

  
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Info

  Set up your Xbox 360 for Windows controller

  
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Setup

  Xbox controllers, headsets and wireless accessories

  http://support.Xbox.com/en-us/Xbox-360/accessories/controllers-remotes

  Troubleshoot your Xbox 360 for Windows controller

  
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help

  If you have further questions about windows, write to us at any time.

• Xbox 360 wired controller works only with Windows 8. Xbox 360 Assecories status when I click on it says I have it has been changed or moved, and will not work.

  I have a controller wired xbox 360, not one of these pieces of plug. I put the USB controller and installed the device. However, it does not work. Xbox 360 Assecories status when I click on it says I have it has been changed or moved, and will not work. I have not touched. When I search for a download for Windows 8 all get them are downloads for Windows 7 and below. It's a bit frustrating to not be able to use it. I would be very happy to help.

  Original title: windows 8 wired 360 controller

  I found the problem. I had the appropriate controller and installed the device correctly. This is the program that runs the unit that had either corrupt or missing files. I uninstalled the program and then installed from the Microsoft Download page. Now he works currently. Thanks for the support.

• Xbox 360 wired controller, Windows 7 problem

  I'm trying to connect an official Xbox 360 controller to my PC to allow me to play the PC game with her.  I am currently running OS is Windows 7 64 bit

  I followed the online help to do this, download and install the file Xbox 360 accessories software 1.2 64-bit for Windows 7 (from http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=Gaming&type=Gaming&name=C8G-00004&os=Win7_64&lang=en)

  When I plug in the controller using the Play and Charge kit, it saves the controller is in the Panel of control/material and software/devices and printers under non-specific, but not in the status of Microsoft 360 Assessories or section of the control panel game controllers.

  What I am doing wrong and how I can fix it?
  Thanks in advance

  Check out this two links:
  http://support.Xbox.com/support/en/us/Xbox360/xboxlive/getconnected/setupahomenetwork/windowsicsconnection.aspx

  http://www.Xbox.com/en-us/pcsetup/MCEWindows7.htm

  Also try to get help from these guys:
  http://www.xbox360forum.com/

• Xbox 360 wired controller works on pc (win 7 64-bit)

  Hello.

  I have the same question.

  Xbox controller is detected automatically by Windows 7 and has worked very well, but today that the sudden is recognized either.

  In device manager it is a yellow triangle.

  I thought that something happened with drivers - resettled (restart pc) - did not help.

  He can be that the controller has been cut? Thank you very much!

  Hello

  I suggest you to run the fixit available at the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  I hope this helps.

• Why my pc crash my xbox 360 wired controller?

  exactly what is written above. I can play dogs for about 30 minutes with the controller of sleeping very well and then a random crash will happen to force kick me on the desk. Please help me it's me so frustrating.

  Hello

  The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
  If you need to contact them.

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  XBox LIVE - Service status
  http://support.Xbox.com/en-us/Xbox-Live-status

  Manage the XBox Live account
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

  XBox Live Sign-in problems
  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 360 Wired Controller not working not not after having been unplugged

  I used to run my 360 controller via usb ports on the side of my keyboard and it worked very well. Friend has unplugged the controller and when I tried to reconnect, nothing worked. Been deleted and reinstalled drivers several times, the computer reads the controller and it turns on, but none of the buttons to enter anything. Device Manager sees nothing wrong and everything works fine. No idea where to go from here.

  Hello

  1. is specific to a particular USB device question?
  2. modifications to the software you did on the computer before the show?

  Method 1
  I suggest you to run the hardware and devices troubleshooter.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2
  I suggest you to see the following link for the USB flash drive to the Xbox 360 support.

  Support for the Xbox 360 USB flash drive
  http://support.Xbox.com/en-us/Xbox-360/accessories/USB-flash-drive#0a888f1bff794b3da8737f0331a8f4d5

  Additional information:
  How to connect your Xbox 360 wired controller to a computer running Windows
  http://support.Microsoft.com/kb/906347

• Where is the serial number Xbox 360 Wireless Controller?

  Where can I fint Xbox 360 Wireless Controller serial number?

  Hello

  Click on the link and see if it helps.

  How to find the Xbox product serial numbers

  http://support.Xbox.com/en-us/Xbox-360/settings-and-initial-Setup/serial-number

  You can also contact Xbox support.

  Welcome to the Xbox support

  http://support.Xbox.com/en-us/