Xbox controller will not adapter PC connect

Similar Questions

• PC wireless to Xbox controller will not sync

  Wireless pc Xbox controller will not work. It installs, but when I sync with the wireless receiver the controller, the controller just flashes and never made a connection, however, when I tried on my brother's computer, it works fine.

  I did search all over the internet I can find about this investigation, but had no luck. Help, please!

  Hello

  Check out the link and follow the steps.

  Xbox 360 Wireless Controller disconnects or unable to connect

  http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

• Xbox controller will not connect to the xbox wireless receiver?

  I got my Receiver to finally work and now when I try to connect my controller that do not access, it just flashes continuous four lights repeatedly. How can I fix it?

  Hello

  Welcome to the Microsoft community.

  Of your posts that I understand that you are facing issues connect the Xbox controller for Xbox wireless receiver.

  Have you tried to use the controller on a different computer?

  You can see the steps from the following link and check if it works:

  Xbox 360 Wireless Controller disconnects or unable to connect

  http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

  Reference:

  http://support.Xbox.com/en-us/games/Xbox-controller-for-Windows-Info

  You can also contact Xbox support team for assistance:

  http://support.Xbox.com/en-us/contact-us?XR=footnav

  It will be useful.

  If you need assistance on questions regarding Windows, let us know and we will be happy to help you.

• XBOX CONTROLLER WILL NOT WORK ON PC

  -J' bought the new Afterglow for Xbox 360 controller at Gamestop. (does not come with the software, plug-and-play)?

  -J' installed the latest software for 360 wired controllers from Microsoft for Windows 7 64-bit Web site

  -The controller is detected in the Device Manager under other devices, like "Afterglow for Xbox 360 controllers", with a triangle of error.

  -Device Manager says:

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.
  To find a driver for this device, click Update driver.

  -Then, the drivers do not work. Windows cannot find the drivers. Also, I have re-installed the program. Any ideas? I'm playing GTA4 Gay Tony extension and keyboard sucks. Thank you!

  go to this site to do almost any 360 controller:

  follow the instructions carefully

  http://www.SevenForums.com/hardware-devices/9118-XBCD-drivers-Xbox-360-gamepad.html

  If it still does not work, change your controller .inf file. C:\Program Files (x86)\XBCD\Driver\xbcd.inf***

  device-> right click on the no Manager work controller-> properties-> details-> hardware lds (check the numbers and add to the .inf file and then sign the file system with driver driver signature enforcement 1-3 (b)

  example of what I've done: % XBCD. DeviceDesc % = Install, USB\VID_1BAD & PID_F900; Afterglow controller for Xbox 360

• Z820 with LSI 2308 sas controller will not publish with intel PCIe SSD installed.

  Z820 with LSI 2308 sas controller will not publish with intel PCIe SSD installed. The system works fine with Sata 600 pro SSD for windows and WD 4 TB Black seagate for storage. When the Intell 900 PCIe SSD drive is installed the system hangs at the LSI Mini OROM screen remains white. is there a way to put the LSI controller to jump the PCIe slots for boot devices?

  2 X Xeon 2695, 64 GB Ram, graphics Nvidia Quadro K5000, 2 X Intel 10 GB Ethernet card.

  Thanks for the reply. In fact I've disabled the LSI controller and connected to the integrated SATA controller and the Z820 starts and works perfectly with the PCIe SSD installed.

  Thank you.

• I've updated to Firefox 8, now, it will not keep Me connected to all the sites!

  Everything was beautiful and brilliant. Then I updated to Firefox 8. Now any website I want to (Amazon, Facebook, Twitter, etc.) will not keep me connected when I check the box to do so. As soon as I close Firefox and reopen it, I have to log in again, even if on some sites it's to remember my username and password (just do not keep me logged).

  I tried to delete all cookies and history and still nothing.

  Does anyone else have this problem?

  In the privacy section of the Firefox options, make sure that Firefox is configured to accept cookies and that it is not set to clear history of Firefox closing.

  (If you use the default "Remember history" then it should work fine. If you use the "customized for the history settings" setting, and then make sure that "Accept cookies" is checked and "clear history of Firefox closing is not checked.)

• Satellite L300 will not let me connect

  My Satellite L300 will not let me connect unless I'm in safe mode and when I go to advanced options it just comes up with a blue screen

  Help!

  Who knows what's the problem here?
  Maybe you should install new OS. You can enter boot options using F8 at startup?

  Repair my computer option is available?

• Apple TV will not maintain a connection with my Samsung

  Apple TV will not maintain a connection with my Samsung TV UHD.  All other devices work well with it.  I tried switching ports HDMI and cables without change.  Apple TV can turn on and turn off, plug in for 10 seconds, or not at all.  (Note: Apple TV is still in install mode, because it does not appear long enough to complete the process.)

  HELP, PLEASE.

  Which TV model you have?

• Xbox controller does not work

  One of my Xbox controller does not work.

  When I turn on my Xbox and I opened (for example) Minecraft.

  He looks up at the sky without touching me same controller!

  Help, please!

  Ask here:

  http://forums.Xbox.com/

  or

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  See you soon,.

  J

  

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• Creative cloud says "disconnected" but will not let me connect. Tried all solutions on the login page errors creative cloud 3.

  Creative cloud tells me I am disconnected and will not let me connect. I tried quiting and restarting the program. I tried to configure the automatic detection of the local network settings. I also tried to delete the opm.db. Still does not work.

  Hello

  You can refer to the Thread -: error "You have been disconnected" whenever I try to connect to the creative desktop application cloud

  Also try:- cloud creative connection errors

  Hope this helps!

• XBOX 360 controller will not connect to pc with Windows 7 64 bit

  I'm tying to connect my XBOX 360 controller to my PC and when for the first time I plugged the cable into the usb slot I the prompt to download the drivers and then a message saying that my device was ready to use. Problem is that no matter what I do, it seems that the controller does not communicate with the PC when I try to test using the joy.cpl I don't get any device in the list.

  Hi DarkAvenger1997,

  Please post your query in the Xbox forums for assistance.

  http://forums.Xbox.com/default.aspx?forumGroupID=17&XR=shellnav

• XBox 360 will not connect to the secure WRT54GS network.

  Have you tried the suggestions we found in the forums for the connection manually and we continue getting a connection error. We rebooted the modem and the router as well, and the XBox 360 do not always connect. Any ideas how to make so that it can connect to our secure network without messing up the network that we have already had to reset and set again only a couple of weeks and don't want to go there again.

  It turns out that the problem was with the Xbox360 not its wireless sensor and refusing to install the correct programming for it. Had well cleared.