Xbox controller will not connect to the xbox wireless receiver?

Similar Questions

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• Why Vista will not connect to the internet wherever I'm connected with my XP machine?

  Why my computer won't get online wherever I like Xp only

  Why Vista will not connect to the internet wherever I am?  I thought what to see that there is a link to a site to repair this, but when I found the site the link had disappeared.  Thank you

  Hello

  1 are you facing issue while trying to connect to public Wi - Fi hotspots or private home network?

  2 have you tried all of the suggestions of Fahimulla K?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• XBOX 360 controller will not connect to pc with Windows 7 64 bit

  I'm tying to connect my XBOX 360 controller to my PC and when for the first time I plugged the cable into the usb slot I the prompt to download the drivers and then a message saying that my device was ready to use. Problem is that no matter what I do, it seems that the controller does not communicate with the PC when I try to test using the joy.cpl I don't get any device in the list.

  Hi DarkAvenger1997,

  Please post your query in the Xbox forums for assistance.

  http://forums.Xbox.com/default.aspx?forumGroupID=17&XR=shellnav

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• HP 7520: HP 7520 will not connect to the wireless network

  There is some additional information to

  http://forums.Xfinity.com/T5/home-networking-router-WiFi/HP-7520-will-not-connect-to-wireless-networ...

  on this issue.

  Have several APs for a single wireless network allows the printer foolish law.  (Not a Repeater, a second AP connected to the local network with the same configuration of network for security, etc.).

  I solved this problem.  In accordance with the discussion on the link, the problem is that the printer cannot connect to a wireless network if there is greater than 1 for a wireless network (SSID) name wireless access point.

  This thread has had several useful suggestions, but what finally solved the problem, it's the second point has access to a mode where I can create a 'virtual' access point and, above all, a SSID associated.

  Note that not all access points or routers support virtual APs, but this function seems to be more common over time.  Older models is not able to do that.  However, a new access point is sometimes cheaper than a new printer.

  If you do not understand the jargon in the procedure below, I recommend that you find someone who does, then they can do it for you.

  Solution:

  1. On one of the wireless access on the network, create an a new virtual AP with a slightly different name SSID (for example < name of the network - > _1), on the same VLAN (usually VLAN 1).  You may need to put the AP in "multiple AP mode" or something similar, and then restart the AP.  All other settings (DHCP, security, mixed mode b/g/n, etc.) must be the same for the new SSID.
  2. Run the printer Wireless Setup and connect it to this new SSID
  3. Confirm that the printer can be seen by other devices on the network

  Tips:

  • Check the security is the same as the original SSID, Alternatively you can create a vector of insecurity in your network.  Do not WEP-128 when the other SSID uses WPA2 AES, for example.
  • The AP I had had several resets to make it work because of the mode and parameter changes.
  • If you connect the SSID but cannot connect to or be seen by anything on your network, check the new SSID/AP is in the same VLAN as the original.
  • Because the printer is not roaming, and the speed is not a problem for me, I used the access point that could support this solution, which is deeper and slower than my primary AP.  I have not noticed any problems.

  The printer has been reliable on the wireless now on the new SSID, 48 hours.

  I have not upgraded any software on a client of the printer (PC, Mac, phones).

  I think that it is a positive confirmation that the problem is with the implementation of the printer of the stack of network and not with the driver or client software on remote devices.  The 802.11 protocols provide for a network name (SSID) wireless with several access points using different MAC addresses.  I suggest this HP look into this as a potential bug with their network printer for the 7520 protocols stack.

• OfficeJet 6500 will not connect to the network

  OK - I know this ground was picked up, but I used every fix recommended here & come again empty-handed. Here's the deal: I have two Macs: a Mac Pro (Basic) and an iMac (remotely). Mac Pro running OS X.5; iMac runs OS X.6 (Snow Leopard). Cable ADSL from the wall to the router (Belkin pre - N); cable router on Mac Pro; HP 960C and JO 6500 has connected to the Mac Pro via USB connections separate. HP 960C and JO 6500 well work w / Mac Pro (by cable). HP 960C has worked (via radio) w / iMac up to what I've updated to Snow Leopard - no surprise b/c HP 960C does not (and will not) Snow Leopard driver. Wireless connectivity for iMac is fine except for OJ 6500 a. I tried everything - washing & re - install the software from the Apple website. Connection via IP address instead of the standard method (automatic); After installation by using the IP address, I get: "(IP address) is currently unavailable." Please check if it is turned on & connected or try again later. "or"home network is busy. I try to send a print job - it goes to the 6500 but 93% finished and then permanently suspended. Printer icon bounce on star red w Dock & number '1' on this issue. In the list of printers, 6500 has a Red House, rather than a green.

  OK - I found the answer on the Apple site & boy is simple: (1) remove the printer since the two machines, (2) drivers turn off 'sharing' on the host machine, (3) install the drivers on the host, (4) install the drivers on the remote computer, (5) turn on printer sharing. Voila! It's a question of the order in which you do things...

• My Toshiba Satellite will NOT connect to the WiFi in my house of employers, but connects everywhere else I will!

  My Toshiba Satellite WILL NOT connect to WiFi in my house of employers, but connects everywhere else I go; I have Windows XP Home Edition SP3, and there a router Linksys WRT16ON. My network card is an Atheros AR5001X + Wireless Network Adapter (and says "this device is working properly". I tried disabling, entering all information, penetrates is not in the news was unchecking the "Enable IEEE 802. 1 x authentication"(and whenever I go in there, he checked again) changed on 'Open' and 'AES' TKIP, WPA (which is) and the password is correct, restart the router, moved the laptop around (the router was in my room, now it is in the thnxt room and it Me REPEAT JUST : 'Validation of identity' and 'impossible to find a certificate to connect to the network'.) I can connect with ethernet, but not with this new situation of the House, do I have the wireless. WHAT ME MISS? I did this for weeks and even now, it says I'm connected, the signal strength is very good, often great, but Explorer cannot display this webpage. Can someone tell me what to do? Thank you!  Allie

  Your old Toshiba equipped with an adapter wireless which is likely to be used for Wireless-a, b, wireless and wireless-g (the project).   Your employer has a newer version (not the last and larger, but much more recent than your equipment) router Linksys that is capable of wireless-b, wireless-g and wireless - n.

  Your most likely problem is that your employer has set up his router to "N-only.  Wireless n uses the same radio frequency as wireless-g (this is why detect you the "excellent" signal strength), but uses a different protocol (this is why you can't connect).

  Politely ask your employer to change the mode 'network' from the back of the default router of "mixed".

  The router manual is here: http://homesupport.cisco.com/en-us/support/routers/WRT160N see p. 13 ' Basic Wireless Settings.

  Looking for a certificate message was probably bound to have the box 802.11 x checked.  This box should NOT be checked for home wireless networks.

• HP Pavilion will not connect to the network

  Recently bought a HP Pavilion laptop and have tried to connect to my wifi at home. He returns constantly with incorrect network security key even though I'm 100% sure that it is correct, because I use the same password for other devices. I had to change my password for my wifi hub and enter this new password as the network security key which fortunately worked however, this means that every device in my house had to be resumed contact with the new password. Not only was it a lot of your time, but as soon as I turned off my laptop and turn it back on again a few hours later, it would not connect to the network again and continued to say the incorrect network security key (and this time changing my password for my wifi does not work). I was unable to use my laptop now because she's not not able to connect to my network and internet and it drives me crazy so help would be very appreciated to help me solve the problem

  Hey Amylou2603,

  Thank you! Exactly what I needed.

  Can you tell me if you have tried the steps that I posted in my previous answer and the results?

  You will also want to try to update the drivers for the card wireless on the laptop. You can find the drivers here: 15-n267sa HP Pavilion PC drivers. You will find them listed under network after you choose your operating system and click Next.

  There are a number of drivers here. Make sure you only download the drivers that match your exact wireless adapter. To see which card you have:

  1. Press the Windows Key + X.
  2. Select Device Manager.
  3. Expand network adapters.

  Once you have checked the map, download the appropriate drivers and run the installer.

  Let me know if these steps resolve the problem.

• Windows 7 will not connect to the wifi network

  My Asus laptop (that I had for a year) all of a sudden, stopped to connect to the internet. The problem is not in my modem or ethernet, connection that work well for my mac. I click the network button and it says "network 4. No internet connection. My usual ssid will not be at the point in the available connections. I don't know what to do! The normal customer service does not know

  Hi AedanC,

  Thanks for posting the question on the Microsoft Community Forums.

  According to the description provided, looks like you are facing a problem when accessing wireless network.

  It would be great if you could answer this question in order to help you further.

  Have you made changes on the computer before this problem?

  See the following Microsoft article and check.

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Keep us informed on the status of the issue.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• IPhone will not connect to iTunes - "invalid response received from the device."

  After years of work very well, I went to put some new music on my phone and all of a sudden got this message "iTunes could not connect to the iPhone 'IPhone of David Platts' because an invalid response was received from the device."?

  I've tried different USB ports, different cables (some Apple official, some after market) and several reboots, but nothing works.

  I'm 10.7.5 OSX and IOS 10 phone you.

  Thanks for the help.

  You have a problem.

  It is good that you have told us you're OS x 10.7.5 (current is MacOS 10.12), because it is your problem.

  iOS 10 requires iTunes 12.5.1 or later to communicate.  iTunes 12.5.1 requres OS X 10.9.5 or later version.

  It's (time to upgrade the operating system of your Mac spent).

  macOS - official Apple Support

• Dell968w printer will not connect to the network.

  It drives me crazy.

  I recently had to change the security key on my DLink router
  But this printer is not connecting
  How do I change or update the connection for the printer wireless?

  Thanks, I'm set. He was simply not connect to router because I changed the security key.

• PC with wireless card will not connect to the login of the user (Windows 7 RC)

  My PC uses a Rosewill (RNX-G300EX) wireless card with the software and drivers of Railink.

  With Windows XP (Pro) PC would connect to my home network and the internet on startup without user logon.  It is important to me because the data that I want to use on the network on this PC, and I don't necessarily want to have a user logged on to do.  I also have immediate internet access to connect remotely with TeamViewer, which worked perfectly with Windows XP.

  Since my switch to Windows 7 RC, I don't get the immediate connection through the wireless card.  It does not connect to the local network or the internet until a user logs on.

  Articles I checked:
  Driver - Microsoft actually already provided an updated driver that were obtained through Windows Update.  The driver for the wireless card should not be a problem.
  Power settings - I checked in advance for the power settings in Windows 7 and made sure that the wireless card has been set 'Maximum Performance '.
  Properties of the device - I have checked the device properties for the wireless card and made sure they were NOT defined to allow the OS to turn it off to save energy.

  I missed some type of parameter which is a novelty for Win7?  My computer with a wired network connection works fine with Win7 and is accessible at startup without user logon.

  First of all, thank you for the Mark test.  But the problem was not to have the connection when a browser is opened.  To open a browser, a user needed to be connected... with a logged-in user, the wireless adapter worked fine.

  Now, to answer my own question for someone else who might read this.

  I sent this message to Rosewill.  They advise that Ralink (spelled correctly this time) had not yet developed a good driver for Windows 7.  Windows Update apparently used a Vista driver and Windows 7 is apparently a bit different... or just Ralink is not cut with Vista either.

  So, I tried a Netgear USB wireless adapter.  BINGO!  The computer automatically start this device.  There is now a network connection to start.  TeamViewer now shows the computer as being online without that person may be connected.

  ANSWER: hardware
  RALink is a failure by juggling the time.  If you are looking to buy an adapter wireless network with a Ralink chipset, don't.  The link that Rosewill support sent me for the Ralink drivers was broken.  The Ralink site shows it as having certificate problems and IE8 does not recommend open it.  They are apparently dropping the ball.

  I'll buy a new wireless network adapter.

• Blu Ray will not connect to the network

  I have a blu - ray player that was able to connect to the internet era the first that I installed it. Now he sees my wireless network but cannot connect to it. All my other devices home plug correctly. Cable connection works fine, but we need a Wi - Fi connection. I tried to reset to factory setting network settings, but it did not help. I was able to connect to other networks that is not the password protected but not connected to the internet. Why did before, but not now, when nothing has changed?

  I did all this and the DVD drive still does not work.  My solution; Take the Sony DVD drive and get another brand that actually works the way it's supposed to.