Xc0000225 Boot\BCD error 0 after factory restore

Similar Questions

• Impossible to put the recovery disk and Boot/BCD error

  Hello

  I have several problems, I hope someone can help me.

  While on vacation 7/12, I bought a HP 2000 - 368WM NotebookWindows 7Home Prem 64.eu at the time of the purchase, I did a recovery disk.

  1. After returning, I partitioned the drive, forget the hidden partitions. The disc changed to Dynamic.I, then removed the new partition. OK no problem, start Windows and I have used laptop with no problems.

  2. this weekend I tried to go back to the factory install and meeting boot\bcd error: 0xc000225 when I F11. The other F1 and F9 options work.

  3.I tried to make recovery disks and there no 3 x 1 disk check. HP Recovery Manager - system recovery, restore your computer to the original factory State is disabled.

  What are my options now?

  I can start and use Windows normally.

  Under computer management, when I right click on the drive of Reactivare recovery disk is gray.

  Thanks in advance for your help.

  Miss N

  Hello cloud

  I still couldn't see your link, but I searched and found this, http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html

  I used one, no option 3, and it worked like a charm. My drive is now in Basic system recovery option is returned in the HP Recovery Manager and I can boot into F11. So Bravo to you for motivating me to look for. Thank you. I did my recovery discs and all is well int universe. :-)

  Thank you

  Miss N

  P.S. No lost files, it took 2 minutes to do. I am very happy.

• Pavilion G6 does not (Win7). Boot\BCD error, status 0xc0000225

  Hello

  My 4 month old Pavilion G6-2155sf cannot start. Normal start-up it is just stuck on the windows logo.

  If I press F11 I get this message:

  "Unable to start Windows. A recent hardware or software change might be the
  cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or your computer
  manufacturer for assistance.

  File: \Boot\BCD

  Situation: 0xc0000225

  Info: an error occurred trying to read the boot configuration data. »

  Also, after pressing F2, I did a quick test drive and I got this result:
  DST short: FAILURE

  I'm off to my memory of end of study, internship next week and this computer is my tool, please help me

  Thank you for your time,

  Guillaume Belouch

  PS: No modification/installation of software or material or anything like that was made last week. Also computer had no access to the internet for a week, so I doubt that it can be a virus.

  P/N: B7G02EA #ABF

  S/N: {removed privacy}

  Windows 7

  Hello

  Unfortunately it would look as the volume is indeed corrupt, which coupled with the error of the DST, would tend to confirm that the drive has indeed failed.

  Now my best suggestion would be to contact HP immediately and get the HARD drive replaced under warranty - make sure you always have a set of recovery discs/media to reinstall the operating system on the new drive, if you have not, you should be able to order it at the same time.

  Kind regards

  DP - K

• Boot/bcd error and no vista startup disk.

  I have vista 64. An automatic update downloaded sp2 and since then I get errror Boot/bcd. I have no bootable cd. Failed to get the manufacturer as computer is 3 years old and was a customized version of a society. I tried to use my laptop dvd backup but does not start.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media:

  Borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it's decent of Microsoft to introduce Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  At soon Mick Murphy - Microsoft partner

• Vista Start Up problem Boot\BCD error

  Husband has Vista, and when he's trying to start his computer he gets the following error message:

  File: \Boot\BCD
  Status: 0xc0000034
  Info: The Windows Boot Configuration data file is missing required information

  I have the same make and model laptop and I have no problem.

  Any suggestions please.

  This knowledge base document Microsoft might help you:

  + Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information" +. "
  http://support.Microsoft.com/kb/927391

  According to this doc the this error occurs when two
  The Windows boot manager entry (Bootmgr) is not present in the Boot Configuration data (BCD) store.
  The Boot\BCD file on the active partition is damaged or missing.

  See how to solve this problem.

  Good bye

• Error 16 after the restoration of Photoshop Time machine

  My HARD drive died. After the restoration of Photoshop CS6 and Photoshop Time CC14 Machine again SSD or opens. I get the error 16. I restored adobe all the library files and all permissions are correct.

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• K1 "unrecoverable error bootloader (0 x 19000008) after the factory restore".

  Having some problems with my K1 for a while & finally decided to do a factory restore and start over. Fact the factory restore (exactly like I had to with my android phone a couple of weeks) & now he jumped to the top with

  «Erase Userdata...»

  Boot loader fatal error (0 x 19000008)

  He sat there for a while. I tried to hold the power button, but nothing. This tablet has been updated to the latest version, it has not rooted or anything else. Just completely factory & updated. The problems I had when I decided to restore it was running mostly just super slow. Took forever to get the apps to arrive on the screen & such things. Thought I just having too much junk previously installed on it, so I tried to restore it & start over. Bad idea! Any idea? My 2 weeks im slammed all day every day & cant slow to call assistance & wait always hold to try & fix it (assuming that they can even repair). Would be delighted to hear that its an easy fix but I'm sure used to be the case. I bought it back in November 2011, so its only 6 months old.

  Hi Javahead

  How many times have you tried to restart since this error?

  Recently, I did the same thing after that my front cam went wrong. I got the same error. But after a few reboots and maybe wait a few minutes before trying again. Finally, he went through the process and completed successfully.

• Status of Boot\BCD 0xc0000225. Error

  I write because I also have the same problem with my laptop as U. I have a laptop Hp G6 and I just shrunk my C drive after a take-over of the factory... and later I can´t get in my laptop because the error: file: \Boot\BCD 0xc0000225 status. Please could you help me with this? How did solve you your problem. Thank you very much.
  
  Please answer me as soon as possible

  Press F8 at startup to appear the WinRE and select "repair your computer".  On the menu next, open a command prompt and type in the following:

  Bootrec /rebuildbcd

  and press ENTER.  If you are asked about the installations of windows, select 'Y' or 'A '.  After that, you should be able to boot into windows.

• The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034.

  I just bought my ASUS laptop (with no dvd player) 3 days ago. Today I turned on for the first time and was usually up to 1 hour later this bluescreen poped out: RECOVERY, your PC needs to be repaired. The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034. You will need to use the tools for restore on your installation media. If you don't have any media of the instalation (such as a disc or USB device), contact your system administrator or the PC manufacturer... As I said before that my laptop came with Windows 8, and it is not a dvd player.

  Thank you.

  Remove the power supply and remove the battery

  Press and hold the power button for 60 seconds

  Apply the AC voltage ONLY (DO NOT INSTALL THE BATTERY)

  Click on the power button and more quickly, press F9

  Follow the instructions to reset the computer to factory default

• Unable to sign on my MOTOBLUR account after the factory restore

  After seeing that I wasn't getting updated and no could not remove all the accounts on my CLIQ, I did a factory restore and tried to sign in with my existing MOTOBLUR account. An error message pops up saying that the session has expired or the password is incorrect.

  The password cannot be wrong, because I can access my account online. The message appears whenever I'm trying to connect. I use only a wifi connection.
  What should I do?

  To sign in blur, you will need to use 3G or wifi. You said you use wifi, make sure that the wifi icon is on the notification bar. If this is not the case, press menu and you can set it here when you register in blur of installation. If you still can not sign trying to join a 3G area, and then try again. The time-out error is saying that you don't send fast enough information on the server of blur. Password error appears but is not always the problem. If you arrive at sign always used the password and then follow the instructions to reset, then try again. Make sure that you use an e-mail address that you will be able to receive mail from.

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• After the involuntary factory restore, lost files, music, photos and printer HELP!

  Factory did restore on win xp 5 former yyr computer.  Lost files, documents, pictures, music. Get error message when I try to re install the printer. NETFramework 2.0 error even after download netframework re printer in car 4.  Help! can I recover my files? they are somewhere in my hard drive?  Is there any software that I can use to recover lost files? Help! Thanks John

  Hello

  Try this free prog.

  http://www.Piriform.com/Recuva

• files + photos can be retrieved after a factory restore?

  original title: can files + photos be recovered after a system restore?

  Hello

  Ive recently had to do a restore to factory on my computer vista laptop because it wouldn't boot up - however he wouldn't let me come back all my files to the top and now lost 4 years worth of photos and work of college who took 2 months to research and set up!

  Is it possible to restore lost items?

  Hope theres help out their like im pulling my hair out now!

  Thank you!

  If wipe you your drive hard back to the sources and everything you had on your screen at the start was that recycle bin doesn't not look well.

  If it start as normal-

  Start-search-photos-files-the file name?

  or try a free file Finder like

  Recuva

  http://www.Piriform.com/Recuva

  There are other free download...

  professionals pay a lot of money online progs that recover lost data, or tech stores.

  also

  http://www.Google.co.UK/search?q=factory+restore+Windows+XP&RLS=com.Microsoft: en - gb:IE - SearchBox & ie = UTF-8 & oe = UTF-8 & sourceid = ie7 & rlz = 1I7GGLT_en & redir_esc = & ei = lxZkTaLTDoG04gbanZDlCQ

• error \Boot\Bcd 0xc000000f on vista

  I've updated my drivers last night and this error message came when I started re, \boot\bcd 0xc000000f

  Please put in your cd of windows and repair...

  so I put in my cd and it appears new, no option to boot from the disc, checked the bios cd is first starting, still no option to boot from the disc, I get my screen/post of the bios, then black screen then this message. What can I do?

  Hi calus2404,

  1. How have you installed Windows Vista? Is it pre-installed?

  2. using Windows Vista CD or DVD?

  If you can organize an another DVD of Windows Vista, then use it and check if you can load from disk.

  If you can load, then try the steps in the link below to perform a system restore or startup repair and check to see if you can boot into normal mode.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows vista stuck in mode hibernation, then received error/BOOT/BCD file.

  Windows vista stuck in mode hibernation, then received file error/BOOT/BCD, Oxc000014c of the State. I inserted the Windows Vista disc to plant but it goes back to the previous message.

  Hello

  Turn off the computer if it has not been extinguished because it started and wait 5 minutes so there
  is a complete reset of the material.

  See if this applies:

  Error message when you resume a Windows Vista Service Pack 1 or Windows Server-based
  2008-based computer after hibernation: "Windows failed to Start.
  http://support.Microsoft.com/kb/95752

  ----------------------------------------------------------------------------------------------------------

  More troubleshooting:

  / Settings (BIOS/CMOS) often F2 so watch the screen as it starts - set boot order for
  1 CD/DVD so it can boot the disk - you don't want to not install Windows - you want to repair.
  Don't forget to put it on hard drive first of all when you do not want to start on the DVD.

  Try the Startup Repair tool

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try Options recovery or a disk of Vista startup repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  ----------------------------------------------------

  If the above didn't help:

  At the prompt of the startup disk:

  Bootrec /fixmbr

  then

  Bootrec /fixboot

  See if you can boot from the hard disk

  If this isn't the case, restart on Windows drive:

  At the prompt of the startup disk:

  CHKDSK C: /f /r

  ----------------------------------------------------

  If necessary this 'peut' help: (not the same error however it may be useful)

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing.
  required information.
  http://support.Microsoft.com/kb/927391

  ==============================================================

  If no help, the assistance of a computer store real (not the leeks and glances at a Best Buy or another Big
  Box stores) or system manufacturer support.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.