Xcode Server installation failed (ssl configuration infrastructure)

After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

And then an error stating:

Xcode Server installation failed (ssl configuration infrastructure)

Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

control = getSetXcodePathProgress;

currentPercentageCompleteRangeMaximum = 10;

currentPercentageCompleteRangeMinimum = 10;

currentStep = 'Xcode stop server';

percentComplete = 10;

status = running;

}

20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

(4 / 6) [START] stop nginx daemon

(3 / 6) Server [START] stop API

(1 / 6) [START] stop CouchDB

(6 / 6) [START] stop builder

(5 / 6) [START] daemon stop control

(2 / 6) [START] stop repeat

(5 / 6) [END - 0.05 S] Stop control daemon

(1 / 6) [END - 0.05 S] Judgment of CouchDB

(2 / 6) [END - 0.05 S] Stopping repeat

(3 / 6) [END - 0.05 S] Stop server API

(4 / 6) [END - 0.14 S] Stop the nginx daemon

(6 / 6) [END - 0.16 S] Stop generator

A successful!

Total time: 0.32 seconds

20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

Note : There was a lot of posts like this that I missed:

20 September 15:50:38 syslogd server [69]: notice of Configuration:

ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

These messages may not appear in the standard system log files or in the database of the ASL.

20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

control = getSetXcodePathProgress;

currentPercentageCompleteRangeMaximum = 75;

currentPercentageCompleteRangeMinimum = 20;

currentStep = "Configuring SSL infrastructure."

percentComplete = 54;

status = running;

}

20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

(1/29) [START] make sure Xcode is accessible

(1/29) [END - 0.20 S] Make sure Xcode is accessible

Audit (2/29) [START] version of Xcode is supported

(2/29) [END - 0.00 S] Check if the version of Xcode is supported

Developer mode (5/29) [START] if necessary activation

[START] Running (4/29) xcode-selector - /Applications/Xcode.app

(29/3) [START] check if the server version is supported

(3/29) [END - 0.02 S] Check if the server version is supported

Data directories (6/29) [START] creation by default (if they are missing)

(6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

(7/29) [START] create a symbolic link to the current path of the Xcode application

Access to the repository (8/29) [START] HTTP configuration

Integration of control (9/29) [STARTED] preparation

Access [START] SSH configuration repository (10/29)

(8/29) [END - 0.12 S] Access to the HTTP repository configuration

(7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

(10/29) [END - 0.12 S] The access to the repository SSH configuration

(11/29) [START] establishing the file config for Redis

(12/29) [START] set up the config for CouchDB file

(13/29) [START] Setup launchd job system

(5/29) [END - 0.16 S] Enabling developer mode if necessary

(9/29) [END - 0.23 S] Preparation of control integrations

(11/29) [END - 0.16 S] Setting up the config for Redis file

(12/29) [END - 0.20 S] Setting up the config for CouchDB file

(13/29) [END - 0.20 S] Launchd jobs system configuration

Group creation [START] (14/29) for users of service if required

Saving configuration [START] (16/29)

(15/29) [START] configuration CouchDB to use all cores

(14/29) [END - 0.02 S] Creation of service if required users group

Users of creative services [START] (17/29) if necessary

(4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

(15/29) [END - 0.08] Configuration of CouchDB to use all cores

(16/29) [END - 0.33 S] Configuration of the recording

(17/29) [END - 0.52 S] Creation of users of the service if necessary

Configuration of SSL infrastructure [START] (18/29)

(18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

Total time: 4.13 seconds

The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

20 September 15:50:41 Server servermgr_xcode [867]: response: {}

error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

errorCode = "-1";

errorDomain = ServermgrXcodeErrorDomain;

errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

status = 1;

}

20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

control = getSetXcodePathProgress;

currentPercentageCompleteRangeMaximum = 75;

currentPercentageCompleteRangeMinimum = 20;

currentStep = "FAILED: SSL infrastructure configuration ';

error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

errorCode = "-1";

errorDomain = ServermgrXcodeErrorDomain;

errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

percentComplete = 54;

status = FAILURE;

}

This article is interesting:

20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

Help to get the Xcode service backup and race would be much appreciated!

I had this same problem. I typed in the following in the terminal:

sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

Tags: Servers and Enterprise Software

Similar Questions

  • vCAC6 IaaS installation fails with configuration wizard - cannot run SQL Create User command

    Kia Ora.

    Put together the first poc vCAC6. The devices are in place and works fine, now up to IaaS Win2k8r2 with local SQL Express and this install fails. Pre-Reqs work. Installed and patched .NET 4.5 (not 4.5.1) as well.

    I installed as a local administrator on the server arrived at the field of IaaS. Installation running. EXE using run as administrator.

    The installation creates the database in SQL Express premises. I slowly raised privileges to solve the problems, but the same lines are written to the LOG file and there is an installation failed.

    News: 2014-01-15 09 49 58 588 h: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB Target.

    News: 2014-01-15 09 49 58 604 h: build succeeded.

    News: 2014-01-15 09 49 58 604 hours: 0 warning (s)

    News: 2014-01-15 09 49 58 604 h: error (s) 0

    News: 2014-01-15 09 49 58 620 hours: time 00:03:35.12

    News: 2014-01-15 09 49 58 667 hours: CREATE USER [serverName\Administrator] to [NVCACIAAS\Administrator] CONNECT

    News: 2014-01-15 09 49 58 682 hours: EXEC sp_addrolemember 'db_owner', 'serverName\Administrator. "

    Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\admin] FOR LOGIN [serverName\Administrator] command.

    Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\Administrator] FOR LOGIN [serverName\Administrator] command.

    Is not not a SQL guru, I tried to elevation of privileges and exchanged between using SQL and Microsoft connection. tried to hook up with a new SQL and AD security with rights to MSDB db_owner account. Also as a 'Microsoft authenticated. " each re - run provides the same statements without worrying if the localMachine\Administrator account exists or not.

    Any help much appreciated.

    Thank you and happy new 2014!

    Hi there.

    I added the administrator account of the local computer in the security of SQL Express to the sysadmin role and installation is complete. ?!? Although I tried to use the SA account to install and the same messages of error and success in this file as well newspapers runs.

    Now these lines look like this;

    News: 2014-01-15 10 21 50 978 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

    News: 2014-01-15 10 21 50 994 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

    If it is installed, but I don't know why I need to raise the local Sysadmin role administrator account so he could complete or why to create the user account wrong localMachine\Administrator in installation because there was.

    I've rolled back to a previous snapshot and was able to repeat the failure until I added this user account to the Sysadmin role.

    Her go configuration and usage vCAC now. I'll repeat the installation at a later stage.

    see you soon

  • Mirage Server installation fails: the server failed to register

    Quick history: the single server installation (Server 2012 R2 w / SQL Express 2012) using the version 5.5.05294 for all components. I have a dedicated domain service account and management group that has local administrator rights and I am connected using this account. I have disabled UAC completely. I've successfully installed the Mirage Management Server and the SQL database looks good. I installed the Console of Mirage as well and can connect to the server and load the license key.

    Here is the error I get when you install the Mirage server:

    error1.png

    It does not right 'Record VMWare Mirage to the Cluster of servers', which is located just past the step where it checks the version compatibility. If I go back to the Console, I've seen the Mirage Server installed, but gives the status of "Version mismatch". I am 100% certain that the version is the same (5.5.0.5294) and even when so far to control binary files and the SQL database to ensure that all list 05294 version:

    error2.png

    As you can see, the version is the same and I have already installed the management server:

    versions.png

    You look at the log of the server installation.

    Install using:

    msiexec /i INSTALLATION_PATH/l * v LOG_FILE

    Open the log file and look for errors after the message, it could lead you in the right direction (post the log of the excerpts here)

    Make sure that your Mirage account has the correct permissions in AD (KB 2105800 details most of them).

    Also, make sure that the user has read permissions to users and computers basic UO in AD.

  • New Mirage Management Server install fails

    I try to install on Server 2008 R2 5.3 Mirage and Management Server installation fails with errors below.

    Server tools VMware Mirage has stopped working. A problem caused the blocking of the program works correctly. Please close the program.

    Name of the failing application: Wanova.Server.Tools.exe, version: 5.3.0.31896, time: 0x54e4e316

    Name of the failed module: KERNELBASE.dll, version: 6.1.7601.23002, time stamp: 0x5507b734

    Exception code: 0xe0434f4d

    Offset: 0x000000000000adad

    ID of the process failed: 0 x %9

    Start time of application vulnerabilities: 0 x % 10

    The failing application path: %11

    Path of the failing module: 12%

    Report ID: 13%

    Product: VMware management server Mirage - unable to prepare VMware Mirage Database for updating.


    Later, MirageDB is removed from SQL 2012 R2. Same on Server R2 2012. Any ideas?

    Yes, the user was already part of the admin groups. In any case, using even install Setup, I was able to install Mirage 5.4 with no problems. Don't know which increased with 5.3.

  • Windows Server 2012 domain controller who fails to configure updates, coming back from changes.

    Hello

    I have a domain controller Windows Server 2012 which fails to configure updates. Each reboot it will say its configuration is updated, then in case of failure and Reverie. I can't find out what it is.

    I checked WindowsUpdate.log the only mistake I see there:

    2015 03-22 1000 1160 installation 09:36:29:735 caveat: SelfUpdate is in an error state

    Historical update check indicates a recent update that does not KB2770816:

    Download this update and install use autonomous to update manually the results of Setup in a message saying that the update is already installed (although windows search for the update in the updates installed appears without any results)

    I tried to launch the Windows update troubleshooting tool, that said he fixed a point, but after a reboot, I get always this error and now a new, every 20 seconds, I if I get this annoying modal popup saying that windows cannot check the updates even if it seems it can:

    Someone at - he counsel on how to locate the reason for the failure of the configuration of updates, perhaps, a log file will be useful information.

    Thank you.


    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Error 25003. Installation failed to create the repository of the vCenter server.

    Hello

    I try to install vCenter Server 4.0. When the Installer tries to Creator repository an error pops up:

    Error 25003. Installation failed to create the repository of the vCenter server.

    I click OK and the installation of double-dipping.

    The last records in the Setup log are:

    Found "C:\Program Files\VMware\Infrastructure\VirtualCenter Server\vpxd.exe".

    Run as user logon administrator

    Found "C:\Program Files\VMware\Infrastructure\VirtualCenter Server\vpxd.exe".

    3221225477 returned by process

    ERROR: Failed to create the repository of VirtualCenter

    Displaying the Error 25003

    Description of our environment:

    • VCenter service runs under the SYSTEM account.

    • Autonomous mode eval version.

    • All ports are standard.

    • Using SQL2005 Express on the installation media.

    • I downloaded the trial version.

    • The server is VM on ESX with SP2 of Win 2003 x 86 CZE Standard Edition

    • The server is not in AD

    • Space 7.5 GB free disk

    I also tried to create the manully database but no luck.

    Thanks for the tips.

    After Installing Win XP SP3 ENG everything works OK... If the problem was really in the language version of the operating system...

  • Cisco first Infrastructure 2.2 DVD installation fails

    We want to migrate to 2.2 first, but management does not want downtime of the device. Try to install the first 2.2 via DVD on a Dell R300 server and then import config of our apparatus to test questions. However, the NCS installation fails due to a problem file. Second burned DVD fails as well. Has anyone tried this before? Using a virtual machine (at this stage), is not an option.

    I have not tried, but don't wait until it works.

    The .iso (DVD) image is tailor-made for the installation on the device of Cisco NCS material. To install on any other material, you must first have the VMware ESXi hypervisor and install using the .ova image.

  • Tried to install CS5 - has got over 100 errors saying "Adobe CS5 Infrastructure CSXS: installation failed.

    I have a CS5 Design Preumium student edition I had while in College but the laptop I installed it on no longer works and I would like to install it on my new computer. When I tried to install it, I got over 100 error messages.

    What my error message looks like:

    Exit code: 7

    -------------------------------------- Summary --------------------------------------

    -0 fatal Error (s), 102 (s), 100 warning (s)

    ATTENTION: Payload cannot be installed due to the failure of the operation dependent

    ERROR:-Adobe CS5 Infrastructure CSXS: installation failed

    And this error continues on a 100 times.

    Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • VCenter Server 5.1 installation fails on registration with vCenter Single Sign On

    Hi all

    Server 2008R2.

    The two level 5. 01b and new facility gives the same error message.

    vCenter installed Single Sign On OK

    vCenter Inventory Service installed OK

    VCenter Server installation is interrupted when the installation dialog box says:

    Recording with vCenter Single Sign On

    The error message is:

    Error 29113. Incorrect entry - a command line argument is not, a file is not found or file specifications doesen't contain the required information, or clocks on the two systems are not synchronized. Check vm_ssoreg.log in the temporary folder of the system for more details.

    Closed log file.

    Know someone at - it a solution for this?

    John

    I had the same problem with the certificate has expired. VMware has made a new kb article:

    http://KB.VMware.com/kb/2035413

    This vcsso file is only there if you do not click ok on the error window. but you do it anyway. Look under the VirtualCenter\SSL of C:\ProgramData\VMware\VMware and see if the rui certificate has expired. mine did and after I removed all the files in there and restart the installation, everything went well, and the new certificate is valid 10 years ;-)

    hope it does not help anyone.

  • A domain on the server vCenter Server installation causes vCenter Server fails to start

    Hi guru,.

    Well I tried for a while, to get my vCenter Server to work with my newly created domain name and at least i did not have much luck. It seems that every time that

    I have create a new domain and restart the system. For the VirtualCenter Server service fails to start on reboot. I checked my odbc connection and test works very well.

    I am able to log in microsoft management studio without problem. But still, the service does not start I understand I can meet here, it's probably a

    with my database permissions issue.  However I can't seem to find the answer by myself if I m hoping to hear some suggestions from all of you who help on this.

    Thanks for the replies!

    Sean

    Uh, you have not installed vCenter on the same server that is running your domain controller you have?

    ADAM and cannot run on the same machine AD.

    If it is installed on the same computer that your DC - get a new machine for VC - this configuration will never work. (minimum supported ram is 3 GB.)

    We see in the newspapers that ADAM is not from, and that's why VC fails to start as well.

    Failed to get all pages of search results: 0xa (a reference was returned by the server).

    Couldn't find OU = container of Instances.  This may indicate a problem with the LDAP permissions for the execution account VirtualCenter, or that the schema is not compatible with this version of VirtualCenter.

    Unable to run the search for the instance

  • GC installation fails on the WHO with NodeManager Configuration step

    I try to install OEM Grid Control and I'm having some trouble to make it past step in the installation of the Configuration of the WHO. I'm not very familiar with Oracle products. I finished all the configuration steps listed in the documentation, and in order to solve a problem earlier, I deleted the Keynectis and Telesec certificates since the cacerts file java keystore. NodeManager is run as a service, even if I think that the Setup process starts a new instance because it cannot connect to the service. I was also unable to connect to the service through the nmConnect WLST function, if it is possible my settings are incorrect. If the only problem is that GCDomain is not saved in the file nodemanager.domains, I'm not sure what I'm doing wrong, because I put it in the nodemanager.domains file located at C:\Oracle\Middleware\wlserver_10.3\common\nodemanager:

    ---
    #Domains and directories created by the Configuration Wizard
    #Fri 22 April 15:23:16 EDT 2011
    wl_server=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\wl_server
    MEDREC-Spring=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec-Spring
    GCDomain = C\:\\Oracle\\gc_inst\\user_projects\\domains\\GCDomain
    MEDREC=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec
    ---
    Note: the file paths are correct and using escaped slashes, as appropriate, but this message board system turns the last double backslash in a line break. I can't find any html solution that works, so just take my word for it

    I restarted NodeManager after making the change as well. Any help would be appreciated. Thank you.

    Details:
    Machine - Windows Server 2008 x 64
    DB - 11 GR 2
    WLS - 10.3.2
    GC - 11.1.0.1

    Install the Log:
    ...
    FINE: Connection to the node Manager... April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA 'CN = AC KEYNECTIS ROOT, OU = ROOT, O is KEYNECTIS, C = EN ". Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 3, OU = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 2, OR = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: This Exception occurred at Fri Apr 22 15:23:20 EDT 2011. April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: weblogic.nodemanager.NMConnectException: Connection refused: connect. Cannot connect to NodeManager. Check that they are running to win2008x64-2:7, 401. April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: java.net.PlainSocketImpl.socketConnect(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: java.net.Socket.connect(Socket.java:525) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: java.lang.reflect.Method.invoke(Method.java:597) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyReflectedFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyMethod.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyObject.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyObject.invoke(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: to $3 org.python.pycode._pyx2.nmConnect (< iostream >: 118) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: to org.python.pycode._pyx2.call_function (< iostream >) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyObject.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: to org.python.pycode._pyx41.startNM$1(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py:20) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: to org.python.pycode._pyx41.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: to org.python.pycode._pyx39.f$0(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py:74) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: to org.python.pycode._pyx39.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.Py.runCode(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.util.PythonInterpreter.execfile(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.management.scripting.WLST.main(WLST.java:131) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: java.lang.reflect.Method.invoke(Method.java:597) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: in weblogic. Run WLST.main(WLST.java:29) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader
    FINE: Wed Apr 22 15:23:20 EDT 2011 Apr 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Node Manager down from this April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader works
    FINE: Not connected to the Node Manager Apr 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Launch NodeManager...
    April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Properties: {ListenAddress=win2008x64-2,ListenPort=7401,NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239,StartScriptEnabled=true,StartScriptName=startEMServer.cmd}.
    April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Command: C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin\javaw.exe - classpath "C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\rt.jar; C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\i18n.jar; C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_oepe1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JROCKI~1.5-3\lib\tools.jar; C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.2.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\lib\ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1\lib\ant-contrib.jar; C:\Oracle\Middleware\oms11g\sysman\jlib\emConfig.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf-API.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jrf-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl2.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dms_11.1.1\dms.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dConfig-infra_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.fabriccommon_11.1.1\fabric-common.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xmlparserv2.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xml.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-pmlib.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-policy-core.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-secpol.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-dependencies.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. WSM.policies_11.1.1\wsm-Seed-Policies.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\orawsdl.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\mdds.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\ws_confmbeans.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\org.Apache.Commons.digester_1.7.jar; C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax. XML.bind_2.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax.activation_1.1.jar. C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax. XML.stream_1.1.1.0.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.http_client_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxframework.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxspi.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.dconfigbeans_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share.CA_11.1.1\adf-share-base.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share.CA_11.1.1\adf-share-ca.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\adflogginghandler.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\adfsharembean.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\commons-El.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\jsp-El-API.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\oracle-El.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\auditwlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\sslconfigwlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\oamap_help.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\ossoiap_help.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jps-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.auditprovider_11.1.1\jps-WLS-auditprovider.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-manifest.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-MBeans.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-upgrade.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-patching.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-sh~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-WLST.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar"weblogic. NodeManager '-v '.
    April 22, 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:21 > < INFO > < domains file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains > 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:21 weblogic.nodemanager.server.NMServerConfig initDomainsMap 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: loading areas file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:21 > < WARNING > < domains file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains > 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:21 weblogic.nodemanager.server.NMServerConfig initDomainsMap 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: WARNING: areas file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:22 > < INFO > < store loading identity keys: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type = jks, PassPhraseUsed = true > 22 April 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:22 weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig April 22, 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: loading storage identity key: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type = jks, PassPhraseUsed = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 > < WARNING > < folder properties for configuration manager node 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using the default settings. > April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.NMServer < init > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: WARNING: configuration properties manager node of the file 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using the default settings. April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 > < INFO > < Saving configuration properties node manager 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.NMServer < init > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: save the configuration properties node manager 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: node Manager v10.3 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Configuration settings: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: ListenAddress = win2008x64-2, April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: ListenPort = 7401 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: ListenBacklog = 50 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: SecureListener = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: AuthenticationEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: NativeVersionEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: CrashRecoveryEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: JavaHome=C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StartScriptEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StopScriptEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StartScriptName = startEMServer.cmd April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StopScriptName = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.log April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogLevel = INFO April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogLimit = 0, April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogCount = 1 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogAppend = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogToStderr = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogFormatter = weblogic.nodemanager.server.LogFormatter April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: DomainsFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: DomainsFileEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StateCheckInterval = 500 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: QuitEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Interface = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: NetMask = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: UseMACBroadcast = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: DomainRegistrationEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: mappings of domain names: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 > < INFO > < Secure socket listener started on 7 401, host WIN2008x64-2/192.168.182.135 port > April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.SSLListener run April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: Secure socket listener started on port 7 401, host WIN2008x64-2/192.168.182.135 April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Successfully launched the Node Manager. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: The Node Manager process runs independent of the WLST process. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Exit WLST won't stop the Node Manager process. Please see April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: to the Node Manager records for more information. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Node Manager logs will be under C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Connection to the node Manager... April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:41 > < WARNING > < directory domain read when Configuration Error > April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: weblogic.nodemanager.common.ConfigException: the field 'GCDomain' to 'C:\Oracle\gc_inst\user_projects\domains\GCDomain' was not saved in the file nodemanager.domains and dynamic domain registration is not supported. Please register the domain in the file nodemanager.domains. April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: to weblogic.nodemanager.server.NMServer.getDomainManager(NMServer.java:257) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: to weblogic.nodemanager.server.Handler.handleDomain(Handler.java:224) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: to weblogic.nodemanager.server.Handler.handleCommand(Handler.java:108) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: to weblogic.nodemanager.server.Handler.run(Handler.java:70) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: at java.lang.Thread.run(Thread.java:619) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    ...

    Vijay,

    Your correct. Even with regard to the OEMGC 10 g Oracle still doesn't have a Windows 64 bit for OEMGC 11 g version.
    It sometimes means that are all companies except 1, the GC server 64-bit Windows servers.

    Eric

  • Failed Installation of Adobe CSXS Infrastructure 4. Error code: U44M1P7

    Just tried to update Photoshop CC and got the above message.  -What this means and how I update?

    Please see Installation failed. Error U44M1P7 | Updates -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-HYPERLINK for more information on how to solve this error.

  • I get an error message in Outlook Express when you try to send, transmit, or respond to any e-mail: "the connection to the server has failed."

    original title: Outlook Express

    The connection to the server has failed. Account: 'pop.4wbi.com', server: 'mail.4wbi.com', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E is what I get every time I try to send, transmit, or answer

    I have outlook Express 6, Windows XP, I would appreciate any help you can give me

    I don't know what I was supposed to check on the Forum, Feedback & product

    Thank you, Karen

    At first glance, it seems that a few things wrong with the settings you have for a server outgoing (SMTP). I think that Westphalia broadband uses mail.4wbi.net as the incoming and outgoing mail server, not pop.4wbi.com (note mail instead of pop ) and .net instead of .com. These are the servers listed in this article:

    I'm not ensure that these settings are correct. Rather I suggest to find the page to set up your own mail server and use the parameters described in this.
     
  • Windows Mail error - error number: 0x800CCC0E - "the connection to the server has failed..." »

    From: bbell121

    I have, I've been making the mistake of another email on another connection on below = the same PC configuration SMTP and POP3 works on another PC but when I try the frame to the top of the same bet on the same PC I have two connections I get this
    message;

    The connection to the server has failed. Account: 'Colleen', server: 'xxxxxxxx.yourwebhosting.com', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10061, error number: 0x800CCC0E

    I readt through this channel and have tried most of the things listed I have Norton System works 2009 I tried it is installed and uninstalled as well.

    I'm running out of ideas?

    I tried port 25 (which works on another PC) but on this one it is not.
    I tried the 587 port not working either.

    anyhelp would be greatly appreciated

     

    De : Gary van

    I guess that your problem is with the reception, because the error message you have provided relates to the reception.
    Ports 25 and 587 do not affect receive it, because they are for the shipment.

    The error message is difficult to assess because you x'd, one part of the name of the server. Perhaps the error is in the part "xxxxxxxx" to the name of the server.
    --
    Gary van, MS - MVP (Mail)

    Another response of the community of Windows Vista discussion groups

  • Problems sending/receiving mail - error number: 0x800CCC0E - "the connection to the server has failed..." »

    De : Briangie

    I've been out of town for a few days. I was using a public Wi - Fi connection to my laptop. The first part of the week worked fine, but now using the same wireless connection, I receive the following error message. Has happened since yesterday afternoon 03/10/08 and today is 05/10/08. What is the problem? Help, please!

    The connection to the server has failed. Account: 'mail.charter.net', server: 'mail.charter.net', Protocol: POP3, Port: 995, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E

    From: Gary van

    In Windows Mail, go to the tolls, accounts, select the account mail.charter.net, properties, advanced. Change the port number for the incoming (POP3) server from 995 to 110. Make sure that the adjacent SSL option is not checked. Click OK.

    As a general rule, the owner of the SMTP server must be the same that provides your Internet connection at the moment.

    The workarounds available when sending abroad are the following:

    1. use webmail to send (via your browser).
    2. ask your ISP if they have one port other than '25' for SMTP. I do not think that
    Charter of fact. Cable companies are very difficult to accommodate travellers.
    3. If you frequently use the same connection away from home, replace the SMTP Protocol
    Server in this respect. It's a little tricky, but if you want to go this route.
    I can provide more details.
    4. If you frequently send to multiple locations, get a free Gmail account,
    Configure it to POP access and use for your shipment of household chores.
    Gmail uses port 465 for SMTP, which is not blocked as is port 25.


    Another response of the community of Windows Vista discussion groups

Maybe you are looking for

  • Sorry, something went wrong. Please try again.

    Hi.I had 32-bit and 64-bit, I changed and now I can't connect to Skype.I have a Microsoft account and I can not connect with Facebook.It says sorry, something went wrong. Please try again.Help, please PS: I don't have a .net framework. Is it because

  • G510 G510s maximum ram memory

    I have reviewed the user guide and the guide material and other type of ram and the number of slots, I don't think any reference within the G510 and G510s will be. Can someone help or better yet, to direct me towards the plug/reference which tells? B

  • where can I get power steering

    Simple question, where can I get power steering? -

  • Validation of a counterfeit Windows version

    I got my PC formatted, and apparently the version of windows XP that they have downloaded on the PC was not a genuine version, so this irritating star keeps jumping on my face at the worst moments in the middle of my work to tell me that I am victim

  • No sound on my HP laptop

    Product name: Dv6-7214nr HP ENVY notebook Product number: C2L40UA Windows 8 operating There is no sound on my HP and when I try to test there is a window that appears saying there is another program running even though I just started to the top of th