XML file for GigE Vision camera

Hello

I'm working on a model of GigE Vision camera. It should be very simple linescan camera. I put in place the necessary set of registers GigE Vision, can communicate with the camera in MAX. The problem is that I need creata this XML file for the camera. There is this here XML file:

http://www.EMVA.org/CMS/upload/standards/GenICam_Downloads/SFNC_Reference_Version_2_0_0_Schema_1_1.x...

What should I do with it? My first version of the camera will have 2 functions: turn on and off I'm confused, because the model xml file has many functions, I don't really have. Should I remove them? Or leave it inside with default values? That she needs a configuration minimum XML file?

Kind regards

Linus

Hi Linus,

If you look at the GigE Vision specification, you will see that there is a minimal subset of functionality that must be present for the camera be declared compliant. That's all what IMAQdx will need for the camera works fine. All other functions in the XML file that you downloaded are part of the SFNC (features Standard Naming Convention) defines the names/behavior for common characteristics that are often found on machine vision cameras. As a general rule, cameras implement a subset of these features. You should not let any features that are not implemented in the XML because it would be just confused because they would do nothing.

Eric

Tags: NI Hardware

Similar Questions

  • Connection of the GigE Vision camera

    Hello

    I develop a GigE Vision camera.

    I want to connect GigE Vision Camera to NIMAX.

    When you first connect GigE Vision camera, I can see the NOR-IMAQdx list devices. ("cam0:mycamera")

    When I click on "cam0:mycamera", a the IMAQ error has occurred.

    Error message is "cannot load the XML of the camera.

    Attached file is the package that was the problem.

    MAX OR send command "Read memory" to retrieve the device XML configuration file.

    (Package no. 11, 13: address 0x200, 0 x 400 memory read command)

    GigE Vision camera send response.

    (No. 12, 14 package: XML URL first choice, second choice of URL)

    I think the number of package 12 and 14 are erroneous data, but I can't find the point of evil.

    Advice me please on this issue.

    I would be greateful to receive the sample package.

    Thank you.

    Hi hkgige,

    These questions can be better adapted to the Committee mailing list GigE Vision standard, I suppose that your company would be a member to develop a device with the GigE Vision standard.

    However, I take a look at your track of package and I don't see anything that looks obviously incorrect. One of the reasons why the software could stop after reading the two URLS, is that he thinks he has already downloaded the file previously. These are cached in a directory on your local system (usually C:\Users\Public\Documents\National Instruments\NI-IMAQdx\Data\XML on Vista and Windows 7). Check if you have the XML file for your camera.

    The error you get usually indicates GenICam has some difficulty in parsing the XML of your camera. If you join the XML itself, I could see if this is the problem.

    Eric

  • I just bought a nikon d5500 has been added LR 5 does not support the conversion of RAW files for my new camera, if I upgarde to the latest version of LR and Photoshop support the d5500 has been added? This camera came out February 2015

    I just bought a Nikon d5500 has been added LR 5 doesn't support conversion of RAW files for my new camera, if I upgarde to the latest version of LR and Photoshop support the d5500 has been added? This camera came out February 2015

    Yes.

  • How to load an XML file for salesforce using API BULK?

    Hello

    Please let me know how to download an XML file for salesforce using API bulk?

    Thank you

    AND

    Hello

    I think it's a matter of SalesForce.com more and think that you will have better luck in looking at SOAP API Developer Guide for salesforce. Sending of a server API SOAP request is very straight forward and there are several tutorials and well documented in this topic.

    See you soon,.

    Stefan

  • XML file for illustrator

    Hi all

    I want to create an XML file to be imported into illustrator.

    Of my clients, I get files excel with 1000 + names and membercodes.

    In illustrator I is a model for the 24 members.

    How can I create an XML file that is compatible with Illustrator.

    Simply save as XML to Excel does not include the tower...

    I hope someone can help

    Here is a tool for her

    copy of your data to excellent in the upper part, the data in xml format will be at the bottom, copy this data into an empty text file and save it with an xml extension, your file is ready to be imported into your illustrator file

    the page is in Portuguese, but it should be clear enough

    http://joaofaraco.com.br/Conversor/

  • Xml file for reading in the clob in the staging table column

    Hello

    I am trying to query the intermediate table with the database adapter that has the column type CLOB containing the XML file. How to extract the XML of CLOB and map the fields to the another final scheme variable.

    Thank you

    Published by: chaitu123 on Sep 20, 2009 08:16

    (1) when you create DBAdapter on a table that has the clob column watch closely the xsd created for the DBAdapter cloumn clob element must be a String data type

    (2) create xsd for Xml files and create the variable of the xsd element

    (3) use ora:parseEscapedXML("yourDBAdapterclobElement") for XmlFileVarilable

    Krishna

  • Need help with the help of an xml file for changes in the system profile

    I'm looking to accelerate the deployment of new rack-mounted servers by updating their server through xml import profile information and I'm stuck.

    I am able to successfully export the profile as an XML to NFS.

    I'm not having luck changing data to import.

    My first attempt great base is simply by changing the name of drac.

    Here are the contents of the xml file that I am trying to import:

    ");" >
    laboratories-001-dev-a01 - dc1.example .net
    The job fails.

    Any ideas on what I am doing wrong?

    Hi Martin,

    I found my problem.

    In the GUI, you can enter a COMPLETE domain like something.example.com name in DNS Rac name field.

    Who will fail via importing a racadm as apparently a. is not allowed during the updating of the attribute "NIC.1 #DNSRacName".

    Is this a bug of the DRAC?

  • DALSA GigE or camera validation fails when no trigger external line is present

    Hi, I hope someone can help me with this problem of Dalsa GigE I get:

    When I have the camera set to trigger external line (LineTriggerMode = 1) and do not have the external clock running then it refuses to allow an Imaqdx configure 'Acquisition' ends without error "attribute value out of range (0xBFF69012).  However, if I have the external clock running (for example at 1 kHz), it's going OK.

    The same thing happens in MAX: I can not navigate to the camera, if the external clock signal is not present (otherwise MAX complains with Unable to Get attribute 0xBFF69011).  With the external clock running, everything is OK.

    So I used Camera Validation Utility or that comes with IMAQdx:

    Without the external clock signal, it reports an error:

    Attribute: CameraAttributes::AcquisitionAndTriggerControls:LineTrigger:ExternalLineTriggerFrequency

    This is the camera of SG - 11? If so I can tell you that there are a lot of questions using this camera with GigE Vision Software generic rather than own Dalsa SDK.

    That said, you could go into the XML file for your camera and comment the partular attribute that is not read correctly. XML files usually live here: C:\Users\Public\Documents\National Instruments\NI-IMAQdx\Data\XML (on Vista/Win7) and you would find the entry

    ExternalLineTriggerFrequency

    and comment it out as below (or remove the line)

    Eric

  • Do IMAQdx and NI GigE Vision 2.0 material support?

    Hello

    From my brief research, GigE Vision 2.0 has features very nice that I'm at the end which are not supported by previous GigE Vision 1.x standards:

    • Compression on the side of the camera

    • Timestamp and sync IEEE 1588 (PTP)

    OR those taking? If not, are there any plans to add support in the near future?

    Thank you!

    Hi again,

    Thanks for the extra frame.

    Assuming that your only using the camera is saving JPEG images on the disk, and you are concerned about the performance of the acquisition system, I think that an IP camera might be a better choice. These cameras acquire images compressed, so you can very well save the direct-to-disk with no extra charge. This will save time and bandwidth of the network processor. The bandwidth would be nice because you could probably just run 6 cameras in a gigabit switch and connect to a port on the PXI chassis instead of several 8234 ports. This is possible because not only if bandwidth is reduced, but the IP cameras can use TCP and sharing bandwidth much more enjoyable that can cameras GigE vision. To save the raw images on the disk, you can use the IMAQdx VI "Get Image Data", which is a JPEG file that you can save directly to an IP camera.

    Regarding the time stamp data, depends on the accuracy required. Since you recorded all the time after that image returned, is quite imprecise because it is not really correlate with the acquisition time. You might get a more exact time in two ways: record IMAQdx a CPU timestamp on receipt of driver that you can use (useful if the CPU is synchronized to GPS/NTP or similar) or you can use a timestamp saved in the image itself in the form of metadata (GigE Vision and IP cameras can do that). I think the Basler IP cameras can use NTP and testify to the time stamp for metadata EXIF JPEG images that you can extract. This mechanism is of course much more precise because it eliminates the delay/jitter of transmission at the time. If you have a few requirements of precision (microsec, milliseconds, seconds?), it would probably give a better idea of what your options are.

    I suggest you take a look at the range of cameras from Basler IP. You can not control the parameters of the image directly in the IMAQdx driver (you must use their web interface, or write additional HTTP code), but once you have the configured device it will keep these settings.

    http://www.baslerweb.com/en/products/network-cameras/IP-fixed-box-cameras

    It is likely that the cameras will be more expensive that some cheaper GigE Vision cameras can be, but I suspect that you could save enough on other system costs will in this way to make up for it. In my opinion, doing compression JPEG on-the-fly with 350 + MB/sec of camera raw data could be difficult, unless you had a tough multi-core system.

    Eric

  • GigE vision on OR cRIO-9068

    Hello:

    We are planning a project in which we intend to use embedded vision and transformation of vision GigE cameras. Our client is interested in the cRIO-9068 embedded platform.

    The question is: is there support for GigE Vision on the cRIO-9068?

    I can't find a document that says, so I guess that no public support is granted. If this is the case, I would like to know why.  I think that the VxWorks targets do not GigE support, but this cRIO running Linux. From the outside, I think it would be possible to provide a GigE for Linux support.  The only devices that seem to favor GigE run Phar Lap ETS.

    Thanks in advance for your kind reply.

    Just to answer he question, the 9068 does not support GigE Vision. Layer MAC Ethernet embedded on the chip of architecting it uses does not meet the requirements of GigE Vision (similar to the old cRIOs VxWorks/PPC).

    The 9068 does support USB3 Vision cameras via its USB 2.0 port well and a lot of GigE Vision cameras have identical models in variants of the USB.

    Eric

  • Edit and save XML files

    Hi all

    I want to add some values in xml files. for example, my files wml is like this:

    
        
    
    

    I want to add a 'trip' through qml. How can I do this?

    I wanted to do the same thing before, but you cannot add data to your xml file according to the native blackberry documentation

    "The XmlDataModel does not support add or insert values.

    from here

    https://developer.BlackBerry.com/native/documentation/Cascades/UI/lists/XmlDataModel.html

    Try checking the JSON format, I did not any program that uses data models, then perhaps other experienced developers have other solutions

  • From the table XML file

    Hello

    Load the XML file into an Oracle Table like I did for me

    SQL> INSERT INTO EMP_DEPT (EMPNO, ENAME, SAL, DNAME)
      2 SELECT *
      3 FROM XMLTABLE('/ROWSET/ROW'
      4 PASSING XMLTYPE(BFILENAME('MYXML', 'EMP_DEPT.XML'),
      5 NLS_CHARSET_ID('CHAR_CS'))
      6 COLUMNS EMPNO NUMBER(4) PATH 'EMPNO',
      7 ENAME VARCHAR2(10) PATH 'ENAME',
      8 SAL NUMBER(7,2) PATH 'SAL',
      9 DNAME VARCHAR2(14) PATH 'DNAME'
    10 )
    11 ;
    14 rows created.
    

    Note:PASSING XMLTYPE(BFILENAME('MYXML', 'EMP_DEPT.XML')

    MYXML is directory

    EMP_DEPT. XML is the XML file for me

  • Where the glossary .xml file

    Hi, I tried to locate the .xml file that fills the glossary widget so that I could copy and create my own modifiable .xml file to import.

    Can someone tell me where I could find?

    Thank you

    Mark

    Hmmm, this example XML file is in the properties of himself? I thought you wanted all of the XML file for all of the words that are in the example? Those that are embedded in the interaction.

  • Clone several nodes and appl_top shared using the XML file backup

    Can I use work save file of application context to repeat the clones and avoid to perform following steps:

    -Configure the node C (run '"perl adclonectx.pl sharedappltop contextfile = < context of Applications for the existing node file >' and ' perl-I < AU_TOP > / perl txkSOHM.pl"orders ")

    If I work the previous clone XML, I would be able to use the same XMl file for re - clone without implement shared appltop and add a node step. Please, share your ideas.

    ma_apps wrote:
    Can I use work save file of application context to repeat the clones and avoid to perform following steps:

    -Configure the node C (run '"perl adclonectx.pl sharedappltop contextfile =' and 'perl - I /Perl txkSOHM.pl"orders)

    If I work the previous clone XML, I would be able to use the same XMl file for re - clone without implement shared appltop and add a node step. Please, share your ideas.

    You should be able to use it. However, according to the Oracle docs support is to clone the main node and add more nodes by cloning the context files.

    Cloning Oracle Applications Release 11i with rapid Clone [ID 230672.1]
    Sharing the Application Tier file system in Oracle Applications Release 11i [ID 233428.1]

    Cloning Oracle Applications V12 with rapid Clone [ID 406982.1]
    Share Application-level file system in Oracle E-Business Suite Release 12 [384248.1 ID]

    Thank you
    Hussein

  • How to use FM OmegaT processed XML files?

    How to convert files in XML (or any other file format that supports the file format that can be used in T Omega) FM so that it can be imported into the translation software open source OmegaT?

    I have a use [Save as] create an XML file, an error message appears when I try to import in Omega T and but I'm unable to translate the file.

    I am trying to use XML files for translation into Omega T, is because in the past, the person who is in charge of editing the file FM would create a text file with sentences to be translated. I would then import the text file in OmegaT to translate and send the text file with the phrases translated to the editor. This could then be edited in a file of FM.

    It would not be a problem if the content to be translated was small. But in some cases there is a large amount of content that must be translated which would take more time to change the FM files.

    What I want to know is if I could use a file format that can be used in Omega T and then be able to convert this file to FM without the Publisher re - edit the file.

    Concerning

    Denjiba-manual

    With regard to the function "Save as XML" in FrameMaker:

    You may know that in FrameMaker, you can work with 'structured' and regular documents.

    When you use "Save as XML" with a document ordinary FM, the resulting XML is simply an output format and are not suitable for reopening in FM. You can translate the XML resulting, but once you return to the FM file, you need to reapply the formatting and the initial numbers back into place. (At least this is what I know of FM8.)

    Otherwise, when you work with an application of structure in FM, you can save documents structured FM in XML format for editing. This means, you can change (translate) the XML document outside FM and open the (translated) XML file published in FM.

    OmegaT regarding:

    I see two ways of translating a document of FM with OmegaT. For both, you will need the Okapi Framework to convert your files into an intermediate format.

    One way requires that your document is a document structured in FM, you can save in XML format for editing. The XML document has probably none of the types of documents that can be translated immediately OmegaT. You can, however, use a utility of the framework of the Okapi to extract translatable text in the XML document in a XLIFF file. Later, you can merge the translated text in the original XML file, which you can bring in FM.

    The other way is similar, but starts with an of FrameMaker MIF file. In this case, regardless of whether or not the document of FM is structured. Of course, there is a MIF Filter for the frame of the Okapi, which allows you to extract the translatable text of MIF in an XLIFF file. Just like above, you can later merge the translated text in the original MIF file. However, the MIF Filter is in beta state, so don't expect it to work perfectly.

    More on the Okapi Framework can be found at http://okapi.opentag.com.

    All that being said, I only played a bit with OmegaT and Okapi. At work, I use an old version of Trados.

    Johannes

Maybe you are looking for