XNET read frame CAN

Similar Questions

• Reading frames of 10 sensors simultaneously

  Hello

  I developed a code that reads CAN data frame the port box (PCI-CAN / 2 series 2). The Board of Directors has 2 ports CAN. I have connected a sensor to one of the ports and reading frames using my code. I want to use the same code to read frames of 1o sensors simultaneously. Can someone help me? I tried to create UNDER VI of my code, but it reads only one port at a time.

  Thanks in advance

  Mark VI as re-entering, and you should be able to call it in parallel (VI properties-> performance-> clone pre-allocated re-entrant execution).

  Remember, if you do this, you will need to use multiple files (as multiple threads can not write to the same file handle).

• I have a Sony E-Reader. Can I transfer books from my library of books I have on my Sony camera and similarly in my library of books I have on my Sony camera?

  I have a Sony E-Reader. Can I transfer books from my library of books I have on my Sony camera and likewise my Sony camera to my library of books I?

  I believe that if you open iBooks, you can drag and drop books from your library on the desktop of your Macbook. It will export the books as an Epub file, you can install on your Ereader as you normally would.

  I think that you open your Ereader in Finder and drag and drop it in the folder it. At least this is how I do it on my Kindle.

  Give it a try, see if it works for you also.

  Concession.

• I want preview to open .pdf, not Adobe Reader.  Can I disconnect drive without uninstalling?

  I want ot s open .pdf in preview, not Adobe Reader.  Can I do this without uninstalling the drive?

  control by clicking on a PDF file > open with > overview

• I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?

  I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?

  Just installed windows 7 but I can't read my product key?

  Help me please thx!

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  Brand

  Online order

  Phone

  Acer

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  1-866-539-3901

  ASUS

  http://eStore.ASUS.com/shop

  1-888-678-3688 or

  1-510-739-3777

  Reference Dell

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&l=en&s=Gen

  1-800-624-9896

  eMachines

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=eMachines

  1-866-539-3901

  Entry door

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=gateway 1-866-539-3901

  HP/Compaq

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00810334&LC=en&DLC=en&cc=us&OS=4063&product=4057208

  1-800-474-6836

  Lenovo/IBM

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-4M7HWZ.html

  1-800-426-7378

  Sony

  https://servicesales.sel.Sony.com/Ecom/accessories/Web/welcome.jsp

  1-800-488-7669

  Toshiba

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  1-800-457-7777

• I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  Hi tonyf,.

  Greetings!

  Each device is compatible with a minimum version of camera raw.

  Here is the complete list: https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Please check if you have this version of the camera installed which include your raw files.

  It would also be that your photoshop will not have to install this version of camera raw as its very old.

  In this case, you can convert your raw files to DNG and can use it.

  To convert the files to DNG, you must download and install the DNG Converter.

  Here is the link:

  Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows

  MAC: http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=106

  Concerning

  Jitendra

• In the recent update of Adobe Reader, how can I go and delete the pages? Thank you very much!

  In the recent update of Adobe Reader, how can I go and delete the pages?

  I am struggling with the new simplified design.

  Any help is appreciated.

  Thank you!

  Adobe Reader cannot remove pages.

• With Acrobat Reader DC can reduce the size of the file?

  With Acrobat Reader DC can reduce the size of the file?

  In previous versions, you could reduce a large file to send. You will still be able to do this in the free account, or all?

  Lol who requires Adobe Acrobat. The free version is Adobe Acrobat Reader.

• HTML Toothfairy? -One click change two frames - can it be done?

  Hi people,
  
  It's 5 minutes spent at 02:00 here in the United Kingdom and I'm running out of ideas with a small problem.
  
  I built a website and I need a simple click on a bearing + image linked to modify the content of two frames - can be done? You can take a look here www.pixelchili.com if you like.
  
  The page is divided into 3 images.
  High = banners
  average = navigation rollovers
  low = information
  
  So in my ideal world, I click on the 'how' link and the bottom frame shows a lot of text and the top frame will change to a beautiful new image that relate to the topic.
  
  I hope you can help. I'll sleep a little now. It's the closest thing to see if the fairy does exist I tried 20 years :)
  
  Hoping you will have left something under my pillow HTML.
  M.
  PS I know frames suck... now, but I have only to learn the basics of Dreamweaver today as last week, I built the site in GoLive.
  PPS - Non-technical Im, so if you can help, please write using the terminology 'Fisher Price'.

  two ways offhand-

  first - simple.
  Create a new set of frames that contains the content you want in each image. Link
  for the new set of frames with a target to _top attribute

  or - with the frameset page open, click on the link and add a "go to url".
  Behavior, defining the framework and the source. Repeat for the other frame and it's
  source.

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/

• XNET Executive session: read frame vintage - not able to read i / c frames

  Hello

  I created Veristand Custom Device for RT PXI monitor Xnet CAN of my Test frameworks to the UUT. I use CAN map 8513. I have a problem that I could see images from to WEAR it, but not able to see the (outgoing) frames, I send to USE.

  But since my host PC (windows pxi) I used the monitor Bus Xnet - in remote mode - to monitor CAN interface in this RT PXI, when bus Xnet monitor device custom above also starts showing outgoing executives. Please help me with this.

  In the custom device - create Xnet session using '.vi XNET Create Session (frame Input Stream)' and 'reading XNET (Raw image) .vi"to read CAN traffic.

  A slightly modified version of 'https://github.com/NIVeriStandAdd-Ons/XNET-CAN-Bus-Monitor-Custom-Device' to see frames the two inbound/outbound.

  With the help of VeriStand 2014

  The people on our Board of Directors VeriStand may be able to help a little more with making a custom device.

  http://forums.NI.com/T5/NI-VeriStand/BD-p/440

  You don't know how it would work in VeriStand, but ownership XNET Echo pass? is probably what you want to use.

• How to transmit frames CAN cyclically inside a loop obey the emission data informed BCD?

  Hi all!

  I don't know if I don't completely understand the behavior of the situation below. I use LabVIEW 2014 and PXI-8513 card under Windows.

  NOR-XNET help reading I understood:

  Cyclical data : the data frame transmitted cyclically (periodical). The period is defined in the "transmission data" field in the properties BOX of the framework in the DBC file.

  But how the transmission time can obey informed transmission data in DBC file if I call the XNET write VI in a loop with a waiting inside? I don't know if I fully understand how it works in a while loop.

  I watch the program below, how writing would behave?

  

  While the loop contains a "wait until the next multiple ms" 100 and the signal selected database (dbc) has a transmission time of 0.02 s (20ms), how many times would the framework passed in the first loop?

  If your answer is "Although the time of transmitting the frame is 0.02 s in this case writing is written only once", I have another question: How can I keep a loop writing frames obeying the time of transmission of the image of the CBD? Consider that I have signals selected different frameworks at different times to transmit.

  Thanks in advance!

  When you use the XNET write Point with Single mode, it updates the value that will be transmitted according to the schedule specified in the XNET (DBC file) database. If you call multiple entries before the frame was transmitted, only the last value written shuts down during the NPC.

  If you look in the help file XNET under the API OR-XNET for LabVIEW-> Sessions-> Modes of Session, you will find information, including an example of how it works.

  In your example - if you have a timing loop of 100ms, but your message cyclic time is 1s, then will send you only the last value of 'editorial' more message cycle time. If your timing loop is 100ms, but your message time is 10ms, so you pass the value even 10 times (about... windows calendar and all that).

  In essence, you CAN transmitting frame continues to run in the background according to the time where you specified in the DBC file, but you can then update the values which are transmitted asynchronously using the single-point VI write.

  If you want to check the values passed are updated every time - you must use the stream or queue mode and your frames to the output of the buffer. That, or you must use a RT target that can update the data in a deterministic way.

• CRIO 9853: Why the mask is required to send and receive extended frame CAN (J1939)?

  I develop application RT who communicate with device of CAN frames extended through CRIO and 9853 CAN module with J1939 Protocol.

  I look at Protocol J1939 example of reference to help me in my project.

  Everything works fine, but I want to know why when I use the 9853 Module I need to use the bitmask (AND 0x1FFFFFFF to READ and OR write 0x20000000)

  As you can see on the example of OR... (to WRITE)

  

  Therefore, use both mask the good CAN Frame ID on the network?

  He's not blok me... but I would like to understand why I need to add this code...

  Hope someone will have the answer.

  Roman

  Playback uses the 30 bit to indicate whether the ID is standard or extended. Otherwise, if you have received ID 0x0000000A, you don't know if it was std or extended. For higher numbers (> 11 bit), it's obvious, but the flag is set, without worrying if you don't need several branches.

• during the RAM Preview and reading frame counters

  I understand that I should be able to display the number
  of the Treaty currently framework during a RAM Preview
  in both the meter of timeline (in frame display mode) and in the info panel.
  This does not work for me, and I'd like to see if I'm missing something.

  This is the State of the counters with a current RAM Preview.
  The only images update count is at the bottom of the composition window,
  and it could not be visible during the processing of a RAM full screen preview.

  RAM PREVIEW CURRENT

  

  This is the status of the counters during the RAM Preview playback.
  Playback CTI is roughly 90 of 912 frame, but the counters at the same time the
  Chronology and the compose window are frozen at zero, while the Info Panel
  is frozen in the last number of the frame in the scenario (the last rendered image).

  
  

  READING OF THE CURRENT RAM

  

  During the reading of the space bar, only the counter the composition window displays
  the current frame.  The meter of the timeline is frozen in the frame number where
  the CTI was stationed during playback started (in this case, frame 0).
  The info panel displays only the playback framerate.

  READING OF THE STANDARD PREVIEW

  

  If I stop playing RAM Preview or standard using the space bar
  the meter of timeline updates to the frame of the CTI, but if playback resumes
  the frozen counter stays where ICT was parked at the resumption of play.
  I feel this behavior using frames, timecode, ft + frames and using
  "To present" the RAM previews.

  Please tell me I'm doing something wrong.

  > I can't seem to get a current account in the timeline will appear a rendering or reading circumstance

  This does not happen.

• NOR 9862% 1 Port 2FFD NI - XNET high-speed CAN Module of the C series

  I'll try to find the resourse on the NOR-9862 which explains the lights on the front of the ideas?

  I know that the green lights light up when there is communication that I am able to communicate with a C-18 cat on J-1939 very well with the LabVIEW program that I have.

  What I don't know, it's what the red light. and no matter which of the two lights can come?

  When executing my LabVIEW program (2015) with a cRIO-9023 (in hybrid) via X-Net platform; map 9862 passed suddenly double green at a red light. The CAT engine cut off, but I'm not sure if the can loss was the cause or the effect of the shuttdown. Now for some reason any I lost all J-1939 - communtication CAT.

  I've been searched ni.com and have not yet found an answer to my question prliminary (first one above).

  Anyone know where they could direct me to find this info?

  Gearmiester,

  I was able to find information about the LEDs XNET Hardware and software manual. The LEDs are covered on pages 63-65. If my interpretation is correct, it looks like you have a solid red LED 1. This indicates that there is a problem with the bus power. Make sure your bus is powered correctly, as the manual indicates that this indicates an open session but a problem with the power supply on the port.

• I get the Error 1606 when itry to download adobe reader.how can solve this problem.

  I am getting the Error 1606 when itry to download adobe reader.how I can fix this.i am not in computers so speak English please... lol

  can I get a free fix for you, it site.been offered loads if you are willing to pay.

  went to the website of windows and it would not accept my product key ID... so I couldn't get free advice/help.

  Hello

  I suggest you to follow the steps in troubleshooting section below and check if it helps:

  http://kb2.Adobe.com/CPS/402/kb402867.html

  Hope this helps,