XOR strangley abnormal behavior

XOR 65 0 = 65... Why labview think the answer is - 66?

Nope... it's a XNOR, so it makes sense.

You make a XOR, i.e. 65 Yes, but then after that.  So, with of I32 (signed), which made-66.

XOR 0 = 65 65

NOT (65) = - 66

Tags: NI Software

Similar Questions

  • Abnormal behavior observed in real-time executable.

    Hello

    I have an interesting problem. I have developed an embedded application of Real-time/FPGA for cRIO 9024 and come across a problem that I don't understand. I work FPGA and RT of top-level and subVIs, proven individually and together when it is run interactively. When I create and deploy an executable in real-time like start, however, the behavior changes. I posted the code below, which I'll explain briefly:

    I have a state machine with 5 States architecture. "Initialize" and "Shut Down" are exactly meet once whenever the device is reset, and the cycle between them is wait > pre-test > wait > run the Test and repeat as many times as desired. Measures are taken by FPGA and past in real-time by DMA FIFO and are then recorded to the TDMS file by the real time. Everything else is just interface.

    The problem comes from the first time, the program enters the Test case to run. The FPGA send measurements as usual, and they are stored in a growing table updated buffering in the fixed-point shift register shown below.

    Run interactively, this method successfully bed, buffers, sorts and writes all data in the file. However, in time real executable, only the data collected in the first round (147 items total, as it is initialized by the whole shift register) are saved, the rest seems remainsin a buffer? before calling the following function TDMS write, is that in the case before the next test.

    I'm unable to debug the executable file in real time, probably because of the FPGA reference or some other schema components. I tried to replace the pad with a FIFO in real-time, a variable shared with RT FIFO active and tried to write inside the loop. The FIFO are not improving the situation, and when writing inside the loop, the loop does not run quite fast to stand.

    The problem does not exist when I run the VI interactively from my computer, only when I try to deploy all of the embedded, any application that works (as far as I know) except this one place.

    Any ideas to solve, or workarounds?

    Ryan

    Technical support helped me to resolve the problem, the early termination of loop caused loop condition, although I still don't understand why the behavior was different as an executable file, because the condition of the loop has worked in interactive mode, so if someone has any ideas as to the why, I would still like to know.

  • How to block a visitor with an abnormal behavior (visit 50 times / day a website)?

    I have developed a website with Adobe Muse. My site is hosted by Business Catalyst. The site contains resources for most of the links to other sites. I don't keep any information about my visitors, there is no registration. I don't have a forum or a blog, just a contact form with Captcha of BC (the most difficult to read).

    A visitor from Germany, always in the same city, is coming on a regular basis on my site. It looks like every half hour, day and night. The number of visits is equal to the number of page views.

    The Adobe help/support line has no answer to this topic. I'm not a web designer, I do not use HTML programming, just of Muse. I would like to put an end to this problem is to change my Web site analytics. I use the geographic location of visitors to find sponsors because it is a not-for-profit project.

    No idea what's going on? How to fix?

    Thanks in advance!

    Jackie

    There is no 'normal' behavior on the internet, you can not open your door to anyone then start screening that is visiting, there are bots, search engines, index services, proxies (all two legitimate and malice in intent) and any number of other things out there invented all day, these changes from day to day then you will need to take all your stats with a grain of salt, because they are never 100% reliable.

  • Abnormal behavior of interaction button in the Animate (Bug?) of edge

    I make the buttons as all Web sites. They have 3 States: normal, mouseover, mousedown

    I show all my experiments in the demo project:

    The project:

    http://miomoe.com/upload/src/up1360.zip

    First of all I bind play ("mouseover") to the mouseover event,

    Play the mousedown event ("MouseDown"),

    ("Normal") play in the mouseout/mouseouthandler() event

    and you can try it on "Button1", you will notice the mouseover event substitute the for mousedown mousedown event don't frame never see the

    To avoid this, I add a variable so that when the mousedown triggers, mouseover event stops

    and you can try it on "Button2", you will notice this time at the mouseout/mouseouthandler() event substitute the for mousedown mousedown event don't frame never see the

    To avoid this, I add a variable so that when the mousedown triggers, event mouseout/mouseouthandler() stops

    and you can try it on "Button3", it looks cool, but you'll notice that when you hold the mouse left click and move the mouse over the button, the button is always in frame mousedown because the mouseout/mouseouthandler() event is stopped, and if you release the mouse left click outside the button, it does not raise the mouseup event

    I noticed that Anita javascript doesn't have such a problem. Any thoughts?

    Hello. Check code data and timeline on this button , he can help.

    PMFR

  • SYSDATE wierdly abnormal behavior...

    Hi all

    I am facing a problem when using SYSDATE.

    Variable DT is sysdate (which is already the DATE format), so the code below should run, but when you try to run it I get the error fololowing.
    incompatible data types: expected DATE got the NUMBER

    SYSDATE is already DATE format then why this error coming. Can someone please explain, I'm stuck here
    Here is the procedure I wrote-

    CREATE OR REPLACE PROCEDURE CMAG.rg_temp


    AUTHID CURRENT_USER
    as
    DATE DT;
    NUMBER OF PRD;
    v_sql varchar2 (4000);
    BEGIN
    --------------------------------
    -THIS CODE IS FOR THE RACE-
    -METRIC EACH PERIOD.
    --------------------------------

    ---------------------------------------------
    -THE FIRST PIECE BUILT TABLE - DATE
    ---------------------------------------------


    Select SYSDATE
    in DT
    from DUAL;

    SELECT MIN (PERIOD)
    IN PRD
    OF BBPROD. ACCT_CALENDAR
    WHERE = PERIOD (SEPARATE SELECT PERIOD
    OF BBPROD. ACCT_CALENDAR
    WHERE DAY_DATE = TRUNC(DT,'DAY')-21)
    AND YEAR = TO_CHAR (TRUNC (DT, 'DAY'), 'YYYY');

    dbms_output.put_line ('hi1');
    DROP_TABLE('RG_PM_WINDOW',1);

    v_sql: = 'CREATE TABLE RG_PM_WINDOW NOLOGGING AS |
    "SELECT GRP |
    ' DE (' ||
    "SELECT" PTD' | PRD||''||'''' || ' || SUBSTR (MIN (YEAR), 3) AS GRP,' |
    "MIN (YEAR) AS YEAR, |
    "MIN (DAY_DATE) AS START_DT, |
    "MIN (WEEK_ENDING_DT) AS ST_WKND |
    "OF BBPROD. ACCT_CALENDAR' |
    ' WHERE PERIOD = (SELECT DISTINCT PERIOD ' |)
    "OF BBPROD. ACCT_CALENDAR' |
    "WHERE DAY_DATE = TRUNC('''||)". DT | " ((', 'DAY')-21)' |
    ' AND YEAR = TO_CHAR (TRUNC(''' ||) DT | " (',''_JOUR_''), "YYYY"))';


    insert into rg_text values (v_sql);
    commit;
    dbms_output.put_line ('hi');

    -drop_table('rg_cvs_hml',1);
    CREATE_TABLE('RG_PM_WINDOW',3,v_sql);
    dbms_output.put_line ('hi2');
    END rg_temp;
    /

    Thank you
    Siham

    Hi, Peter,.

    Peter Gjelstrup wrote:

    WHERE DAY_DATE = TRUNC(DT,'DAY')-21)
    AND YEAR = TO_CHAR(TRUNC(DT,'DAY'),'YYYY') ; 
    

    And why truncate to day before taking the year?

    TRUNC (dt, 'DAY') returns at the beginning of the week that contains the dt. If dt is in early January, then the week could have started at the end of December of the previous year, so you can't say TO_CHAR (dt, 'YYYY').

  • El Capitan: Conflict of file Finder? Suddenly deleted files

    It happened now on three different occasions: I did nothing in particular on my Macbook Pro (El Capitan 10.11.5; 2.7 GHz Intel Core i5, 8 GB RAM, SSD 256 GB DDR) in collaboration with some files in a folder, when suddenly the folder containing these files was empty.

    For example once I was renaming a folder and then open it and print a pdf in this folder. After successfully printing file, I closed and switched back to Finder - to meet the folder above to be empty and the file printed pdf just disappeared, as well as all the other files which are used to be in this folder. Then I noticed that the folder was suddenly his previous name (one than what it used to be before I changed it). I found the files missing in the trash and lost in the folder files superior (to the strange abnormal behavior) with 'conflict' and a long series of numbers preceding its actual file name.

    More tips: the first two times it happened, was when I had open Parallels running Windows 10. The third time, Parallels did NOT work.

    I couldn't find someone who described such behavior, the web or on Apple's site to research. What is wrong and, above all, how can I stop this behavior?

    Your car could be at fault. Avoid any race condition that you can induce the wise software you use that would result in the disappearance of files.

  • On Windows 8, some widgets, such as the menu near the upper right button, stop working after awhile, and restored by restarting the PC.

    I use the latest versions of Firefox as soon as they are available on a PC in Windows 8. Firefox works fine, usually a few hours before the annoying problems manifest. The problem, that I address here is some widgets, including some widgets Firefox and widgets (such as buttons and selectors menu drop down) isolated in some sites stop functioning. In Firefox, the Menu button (the icon of three dashes stacked) stops working. And the download arrow sometimes stops working too. Sometimes, sub-items as printed stop working. A pull-down, the high and arrow down keys could still work even if I might now be able to select with the mouse. Closing and re-opening Firefox usually restores some functionality. However, I usually have to restart the PC to restore all the functions that has stopped working. So I'm good for usually a few hours yet. Another inconvenience, which others have addressed, is the appearance of Chinese characters - to research on the tab toolbar labels at the top. Restart Firefox gets rid of these for the moment. Thanks for the study.

    Philipp,
    Thanks for the quick reply and for the advice that you have presented.
    I downloaded and installed the graphics driver that you recommended. The process went well. I have hardware acceleration disabled by an earlier recommendation to remove these Oriental characters.
    After two days of problem apparently having been fixed, I considered replying to report success. But before I could get around to doing so, abnormal behaviors reappeared. Thanks for confirming the source of these Oriental characters. Previous research indicates that the source was with McAfee or Firefox, a bit like a battle for "pointing the finger" in between.
    Best,
    JRSTOUDT

  • Double click on a page causes Firefox to go back a page instead of highlight at the insertion point

    I have a Logitech iFeel MouseMan. The side button is set to double-click. Sometimes instead of highlight to the cursor position the tab jumps back a page. (In other words, it is as if I had clicked the button left of the return address bar.) This abnormal behavior doesn't happen if I physically double click with the left button of the mouse. This anomaly came a year ago and a Google search has a Firefox configuration setting that solved the problem. Now I do not think the setting and a Google search provides no answers. I solved the problem by resetting my computer to a previous point of reset, but it is an inelegant solution - and it takes hours. (The problem does not occur now. I ask for the future). I prefer to do the problem by changing the appropriate setting of Firefox to go. Logitech told me that the problem is not with the mouse, or its software, but with Firefox and that I should ask experts of Firefox.

    I don't know what setting that is actually, but here's how you can understand.

    1. Enter about: config in the address bar, press enter
    2. Accept the warning
    3. Type of mouse in the list filter field
    4. Settings no standard are "BOLD", now you should be able to see which setting you have changed
  • Tecra S11 BSOD after trying to install BIOS v3.1

    Tecra S11 BSOD after trying to install BIOS v3.1

    I have reinstalled all utility fingerprint successfully. After that I tried to install the new BIOS v3.1, but I got the BSOD
    Win 7 pro
    Where can I find the minidump to see what file that are the problem?

    C/windows/minidump folder is empty.

    Hello

    Do you get the BSOD during the BIOS update procedure?
    Are you using the Windows operating system preinstalled Toshiba? or did you install your own system?

    If you have installed your system, then you should check that the VAP is installed as well.

    Also, I found this info about the update to the BIOS:

    + Attention! +

    + Please close all applications before running the update. +

    + At the end of this process, the computer will be restarted in order to update the EC. +
    + While updating the CE, the screen will not appear and the power LED etc can blink. +
    + The computer may restart several times. There is no abnormal behavior. +
    + Please wait until the computer is restarted fully. +

  • Twinning/incoming connection unpaired device

    I found an "abnormal" behavior I describe below:
    . Connect a headset BlueTooth on your computer.
    . Once it has been done successfully,
    . Disconnect the device (headset).
    . Then, remove the device from the list of devices on your computer.
    . Now try to connect your device to your computer FROM your device.

    -Online PIN code is requested, but the profile never appears in the
    List of computer devices and the connection fails.

    No information on this issue?
    Is there a something to do to make it work?

    This was found on Toshiba BlueTooth stack 4.20.08 (and previous 3.0.3)

    Hello

    I use BT 320 Plantronics headset with my laptop and I can tell you just that configuration is very simple and finished in one minute. Since then, I simply use Plantronics shortcut on the desktop and can use the headphones without any problem.

    I put t know why I should remove device from the connections list. If I do that I have to configure the connection whenever I want to use.

    . Then, remove the device from the list of devices on your computer.
    . Now try to connect your device to your computer FROM your device.

    Sorry, but this way of using peripheral BT is for me unusual. When BT device on your laptop is enabled start Bluetooth settings and create the new connection. Every time when I want to use the BT headset, I do follow the steps:
    -Device of BT and activate BT on the laptop
    -Double-click on the shortcut created to BT headset
    -Portable contact BT and I must press helmet itself to establish a connection
    -After made this sound on the laptop are completely disabled and every sound produced on the laptop I hear BT headset only

    All that s! I can't launch connectivity BT headset JUST to center of notebook BT (BT settings double click on the BT symbol in the taskbar).

  • Portege R500 hangs / pauses during the connection through the LAN

    My Portege R500 is like that: when all using WIFI or 3G works fine but I would use LAN for best performance when he's at the office. As soon as the LAN cable is connected the machine starts making strange breaks for 1 to 2 seconds and I want to say break total, even the mouse pointer freezes on the screen. This happens every 5 to 10 seconds and stops immediately when you unplug the LAN.

    Someone at - it solution or an explanation for that? Hardware error? I have all the latest drivers from Toshiba, even the latest firmware for both the computer and the built-in 3G modem. No strange software or bad - one abnormal behavior is used, antivirus is Trend OfficeScan and standard Windows Firewall is used.

    Thanks in advance.

    / Magnus

    You can test at home or elsewhere? It will be interesting if the same thing will happen if you connect your laptop to the router at home.

    Have you talked about this with your local administrator?
    What you can try is to update BIOS to see if this will change anything.

  • Strange keyboard on Satellite M40 problems

    My Toshiba M40 has been giving me problems keyboard quite frequently. I funny characters like NB¬A
    When I press the left SHIFT key and then the keyboard starts abnormal behavior:

    1. He moved to uppercase mode - to type letters more low, I actually have to use the caps lock.
    2. I can't use the SHIFT key to type the special characters figures.
    3. by clicking on the menu bar gives me a different effect, as if the SHIFT key is down already as it is not.
    4. press the button right shift takes me to the "Save" option
    5. I can't select a file or folder as several of them selected at the same time.

    And then let fall, shut down the computer (it does not restart at this time)
    After a while, the computer starts normally, but I'm never sure when it will start to behave badly again.
    Read about the update of the bios, so I got mine upgraded to version 1.7 of the toshiba Web site (this is the most recent they had for machines with ATI graphics card).
    Sometimes, I use an external keyboard when the problem occurs repeatedly.

    would appreciate advice on how to overcome this software / hardware problem.

    Hey Ashok,

    It is not easy to say what is causing this strange behavior, especially since it also occurs with an external keyboard. One clue is that the laptop does not restart once you stop it unless leave you for a short period. This suggests that the unit is overheating and that it may well have an impact on the unit that is causing your problems.

    I suggest that you try to give the laptop a clean to remove any accumulation of dust and debris from radiator CPU.

    Kind regards

  • What's new in the update of the BIOS v2.00 for Satellite L505-144

    What's new in the update of the BIOS v2.00 for Satellite l505-144

    Thank you

    Hi mate

    As much as I know European Toshiba driver page does provide no details what has been changed in the BIOS.
    But I found some details on the Toshiba U.S. page.
    It seems that Fn + N + 1/2/3/4 function of debugging has been removed in 2.0 BIOS to avoid the abnormal behavior of the keyboard.

    Welcome them

  • Network questions and caused by the Apple TV 4

    My apologies for the long post...

    I bought a new Apple TV 4 this week an upgrade to ATV3. The main reason for this is to get proper access to my subscription of Apple's music on my living room AV setup - it would have been nice to get just a small update on the ATV3 to work well with Apple music!

    In any case, the addition of this innocuous little device seems to have caused all sorts of questions about my home network.

    I have connected the ATV4 using ethernet to my Virgin Super Hub, made the simple configuration via iPad and has proceeded to explore - everything seemed fine. Even downloaded the speedtest excluding interest and who reported a healthy 90 + MB. Made the usual check for updates and this 9.0.1 installed.

    First of all, we noticed the following aspects with the ATV itself:

    1. During the operation, she would bring "no network connection.
    2. By looking at the network settings it shows connected Ethernet but had lost it's previously that would deal with DHCP and DNS details
    3. It does not recover
    4. Just physically remove the cable disconnected and reconnected would force it to find an address - done interesting a different each time. Other devices on the network tend to have the same address (as is usually the behavior, I expect), but he may then lose later
    5. In addition, when it is connected to the speed sometimes fall causing stuttering/buffering of the same Apple music / local libraries
    6. If the ATV4 is awakened from his "sleep" he also still not address
    7. I removed the Ethernet and tried the same thing with Wi - Fi - it presents a similar loss of address - so I conclude its not related to the transport

    I did the usual restart/re-Multi-Power of router, switches and access points - I have an Apple Time Machine (in switch mode + providing a WiFi access point second across the House), over a gigabit 8 ports switch with the Virgin cable router. In no case a network complicated and so far I've had NO problems with the internal network - before the addition of ATV4 we had several wired (Macs, PS4, PS3, Smart TV, home automation) and wireless (ATV3, Blu - ray, another PS3, MacBook, iPads, iPhones, etc.) ANY abnormal behavior of customers well. But still the problem persisted. I had to leave the investigation, but left the ATV on and connected via ethernet.

    Now, here's the next interesting issue. My son said that it could not connect to the WiFI network with his iPhone 6. The phone would see the ads these two WiFi networks, but on the selection or just would not get an address never (even with reboots, restorations, etc.), to the point where he thought the phone had a problem with the hardware (also proposed by the Apple Support). Other devices seemed (at this time) to connect OK, even more reboots to network equipment does not solve this problem. So iPad (already OK) my wife had the same symptoms. A little Google and look on this site of the updated support various complaints about the networks ATV4, slow speeds, etc. - and including an addition can cause the ATV4 hitting on questions to other devices that you try to use the same network. So I turned off the ATV4 and ' hey presto' the phone that don't would not connect worked immediately, iPad & other devices connect and can access the internet + LAN in quick as they did previously.

    Now, of course, this probably isn't a big problem for everyone (otherwise this forum would be full of only those complaints), but I can only conclude that the Apple TV 4 (9.0.1) is at fault. If I just keep the same and pop my old ATV3 instead I get NO such problems.

    That's all very boring, because I also bought a second ATV4 as a Christmas gift for one of my sons. Is it really £300 + in the sewers?

    The other people in this community, see some or all of these questions? Permanently or intermittently? Has anyone received all responses support who can help me? I will of course follow up with Apple myself.

    Now, of course, this probably isn't a big problem for everyone (otherwise this forum would be full of only those complaints), but I can only conclude that the Apple TV 4 (9.0.1) is at fault. If I just keep the same and pop my old ATV3 instead I get NO such problems.

    That's right, that is not a problem for the vast majority of users, in fact I'll go far as to say that I only saw one or two messages with 'Similar' issues. May I suggest you try in another place (maybe a friends or preferably to an Apple store), I'm inclined to think you will find it works perfectly, if it isn't taking it back for a replacement.

  • C0N96PA HP Envy 4 1103: Faulty keyboard

    Hello

    My laptop HPENVY 1103 4 keyboard started badly, suddenly some keys began abnormal behavior, arrow keys wont work and delete button works all the time, which causes a lot of questions that I keep on losing data. Can someone help me to find out what the problem is, and I have to change my keyboard. I bought in 2013, so the warranty is over.

    Thanks in advance.

    RM

    Hi @User101,

    Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I watched your show on your HP ENVY Ultrabook 4-1103tx computer laptop and the problem with the keyboard work does not correctly. You can solve this problem bychecking the keyboard language.

    Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically. This helped other people.

    Here is a linkto troubleshoot the keyboard.

    I hope something here helps you.

    Thank you.

Maybe you are looking for