XP - error: the system cannot find the specified file.

Similar Questions

• Error 0 x 80070003 system cannot find path specified when you try to open the music folder

  Original title: error 0 x 80070003

  Opening of office music folder and clicking new folder, a new folder window appears and indicates "error 0 x 80070003...» the system cannot find the path specified. »

  What should I do to make a new folder?

  Thank you

  Newby0

  Hello

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved. Please provide us with some answers for a better understanding of the issue.

  1. Since when are you facing the issue?

  2 are logged as administrator?

  3. where's the music folder?  Located internal or an external storage device?

  4. do you have an anti-virus installed on the computer program?

  5. are you aware of any recent software or the hardware in the computer changes?

  You try to open the file as administrator. Right-click on the file and select run as administrator.

  You can also try to launch an online scan and check if that helps.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  You can also start the computer in safe mode and check if the problem persists. If the problem persists, you can start the computer in a clean boot state, and check if all third-party software may cause the problem. Clean boot helps eliminate software conflicts.

  Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• When I tried to power on VM ends up in the right error: the specified file is not a virtual disk. Cannot open disk ' / vmfs/volumes/4d48ad95-ad5e027a-67f4-e41f1360cc9e/Iso/ser01/ser01.vmdk' or one of the snapshot disks it depends on.

  I stop a virtual machine after a certain time, I tried to power. Its has ended up in the following error message

  Reason: The specified file is not a virtual disk. Cannot open disk ' / vmfs/volumes/4d48ad95-ad5e027a-67f4-e41f1360cc9e/Iso/ser01/ser01.vmdk' or one of the snapshot disks it depends on.

  The machine was working fine before the closure.

  In the data store, the file type of the virtual machine is 'file' instead of 'virtual drive '.

  Help, please

  You are missing the file descriptor hard. The xxxx - flat hard is the file that contains the data effectively. But the xxxx.vmdk is missing, which is a text file that connects to the flat file.

  AWo

• I get this error: the specified file is not a commercial product

  I bought for scrapbooking, files from the internet and try to use it with my software of CM.  Once downloaded, I can't import the info to my Creative memories because I get the error message that the specified file is not a commercial product.

  Communicate with the scrapbooking software company or the company that provided the files Add on for the help on this product.

  writing in the new message: * e-mail address is removed from the privacy... *

  I bought for scrapbooking, files from the internet and try to use it with my software of CM. Once downloaded, I can't import the info to my Creative memories because I get the error message that the specified file is not a commercial product.

• Error: the specified file is not a virtual disk

  After working flawlessly for months, something went haywire today and my next attempt to access my VM Fusion has been met with "the specified file is not a virtual disk.  I followed a number of proposed solutions here and on the support without result page.

  A question I have is it makes sense that my hard file is 1 KB in size and the text in TextEdit is gibberish (compared to, say, my .vmx file denominated in English for the most part)?  The last update for my performed hard at 12:33 today, where many of the other files (including files hard # s 21) have been updated at 14:52.  Is it possible that my hard file is corrupted?  If so, can it be rebuilt if I don't have a backup?

  If you don't have a good copy of the file to replace the one damaged with "Windows XP Pro.vmdk" then use attached which was created from information in the vmware.log file provided in the .tgz support group.

  The attached file "Windows_XP_Pro.vmdk.zip" contains a "Windows XP Pro.vmdk" file to replace the one damaged.

• How to resolve the error "the specified file is not a virtual disk?

  Hello - I have a ubuntu/linux host running vmware 1.08 with a SBS2003 VM that recently ran out of physical space in HD. After adding a new drive hard I know to get a specified file is not a virtual disk on one disk error I try to add - the other 3 work. After looking around here, I checked the file descriptor and it seems in good condition.

  My paper does not help because I can not start the virtual machine with the hard drive, I need.

  What are some solutions that I can try?

  Thanks for any help!

  B.

  Unfortunately, you lost the data of zero bytes hard snapshot files. I hope that you don't have a backup of your data, since the snapshot was created in January!

  To be able to feed the virtual machine - even with the disk data corruption - replace zero files hard bytes per who has 327680 bytes, which is essentially an empty file with only the metadata.

  André

  PS: as mentioned earlier, please save the files until you turn on the virtual computer to be able to return to the current status in case you should!

• power error: the specified file is not a disk (.vmx) virtual

  Hello

  I installed vmplayer 5.0.0 and I can't open the .vmx file. It is throwing an error indicated in the attached screenscan

  can someone help me on this please...!

  Thanks in advance...

  "Oracle - RAC1.vmx.zip" the attachment contains a new file "Oracle - RAC1.vmx", created from the supplied vmware.log file.

  With VMware Player closed, unzip (double-click on) the file "Oracle - RAC1.vmx.zip" joint and replace the file "Oracle - RAC1.vmx" original by one here.

• Question error message: System cannot find the file specdified.

  To switch on, I get this error message:

  system does not find the file specdified.

  To switch on, I get this error message:

  system does not find the file specdified.

  You can log in to your account admin in normal mode?
  If not,
  You can log in to your account admin in Sfae Mode?
  If so, please do a system restore. Choose the date that you did NOT have this peoblem as your restore point.

  1. how to get mode without failure:

  Shut down your computer > turn back to him and immediately and repeatedly tapping the F8 key until you see a black and white screen. The top/down arrow and select Safe Mode.

  2. how System Restore:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe"on Windows 8.1

  I've updated my OS to Windows 7 64-bit edition of Windows 8.1 pro 64-bit, and when you try to reinstall the software and the driver for my printer HP Officejet J4580 all-in-one I get all sorts of errors. It worked perfectly on Windows 7.

  I get the most common error is: System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe', as well as the facility is abandoned.

  I tried a lot of solutions from the HP Web site and these forums, but my problem is still there.

  I already tried the long solution presented here:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/install-error-quot-the-system-cannot-f...

  and

  http://support.HP.com/us-en/document/c04206080

  I even found the directory where installation has been decompressed and copied to the desktop, but the error persists.

  I need the complete software because I need to use my printer Officejet scanner, so I can't just simply print drivers.

  I need desperate help on getting this new work.

  Specifications of the computer:

  CPU: Intel Core i7 - 4820 K Quad-Core 3.70 GHz 10 MB Intel Smart Cache LGA2011

  : DDR3 memory / 1866 MHz Quad Channel 16GB (4GBx4)

  Printer: HP Officejet J4580 all-in-one; connected via USB

  OS: 8.1 Pro 64 bit Windows

  GPU: AMD Radeon R9 200 series

  I finally solved it by myself after many hours of pain.

  I clean any installation of HP from my computer using the HP Officejet software and driver removal utility:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-110151-1&cc=us&DLC=en&LC=en&OS=4158&product=3645100&sw_lang=

  After the computer restarts, I moved on the desktop, the installation directory unpacked that HP printer install wizard for Windows had previously downloaded and launched.

  I deleted all files in the directory %Temp%.

  I disabled McAfee antivirus real time and Windows Deffender analysis.

  I ran the setup.exe in the installation directory in my office.

  The installation is smoothly and completed. I have already tested the printer and all features function normally.

  I hope these steps help someone with similar problems to get the software installed.

• Cannot delete the file and the error is "the specified file is not valid or too long." Specify a different file name.

  Hello

  I have filenames with weird values inside (created by Application software).
  Here is an example:
  GIBtmpphoto0_11:27:16.145.png

  When I try to delete it, I have the following error:
  The specified file is not valid or too long. Specify a different file name.

  And it takes a lot of space in my hard drive.

  How is it possible to remove it?

  Thank you.
  Best regards
  Marc

  Original title: delete files with weird names

  Hello

  My corrupt files are found on a disk of material on my computer.
  I have re-formatted the full disk to remove these files.

  Best regards
  Marc

• "The specified file is not a virtual disk" Please someone help, very URGENT

  Dear members,

  Yesterday the electricity of night exploded, so my PC crashed. Today when I tried to open my virtual computer (Workstation 8), it says error: "the specified file is not a virtual disk.

  Tried to do a lot a lot of things that I found online. Nothing has worked yet. My head is about to explode, because I had the very important company data on this machine.

  If someone could provide a working solution, I could pay.

  Please help me!

  Thank you very much, I'm so desperate.

  Attached is some useful info, such as my iii and vmdk, etc files. PNG for the image of the full file in the directory of the virtual machine list.

  On the screen, it seems that you have lost SERVER - s014.vmdk (zero bytes). You can try to replace this file with a hard clean/empty file (for example a copy of the SERVER - s010.vmdk) to see if this allows the access card to the virtual disk again. However, first save all files of the virtual machine to ensure you can return to the current state. At least create a snapshot after you replaced the hard file.

  According to the blocks of data previously stored in this file, you may have lost up to 2 GB of data.

  André

• VM Workstation V9 "the specified file is not a virtual disk.

  I use 9 Workstation and run all my virtual machines from an external hard drive.   When I open two of my most often used VM "hard drive" in the devices section is empty and when I try to start the virtual machine, it gives me the error "the specified file is not a virtual disk.

  It looks like all of my hard are present and represent.

  Any ideas why the 'Hard drive' field is empty?

  

  Thank you for all the ideas.

  The following extensions are of length zero and why you get the error message.

  "Windows XP Professional SP3-cl1-s001.vmdk"
  "Windows XP Professional SP3-cl1-s020.vmdk"
  "Windows XP Professional SP3-cl1-s038.vmdk"
  

  The only thing you can try is to copy an empty measure (binary hard), which has a 320 KB on the behalf of the extent of the lack and then try to ride it to retrieve all user data may need/want to recover.  That said, the probability of it being viable virtual hard drive to function as a VM with the first binary measure missing and now replaced is generally thin at best.  If you have a backup of the virtual machine then copying scopes missing backup is also an option.

• Setup error "the system cannot find the specified file" (hpzprl40.exe)

  Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

  Hi loveisus,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

• LaserJet MFP M125nw Pro: #2 cannot install LaserJet MFP M125nw Pro because of the error "the system cannot find the file specified."

  Hello

  I struggled in the last 2 days to install my new all in one Pro LaserJet MFP M125nw. I tried almost all the stuff Google and this community offered under the heading "the system cannot find specified file", without success. My frustration is huge because I'm not really a novice when it comes to solve similar problems.

  Here is what I do and what is happening:

  I downloaded the latest version of the complete software for XP HP offers through their Web site. I tried to install the drivers through the install wizzard, then manually (used for the files in the folder 7ZXXX in the directrory temp) but no matter what I do, I get the same error again and again. In fact XP recognizes the printer and the scanner, it installs even drivers for the scanner and it works but after maybe 50 attempts in different ways, XP couldn't install the printer driver.

  Here are a few screenshots:

  http://i.imgur.com/GuGmTP2.jpg

  http://i.imgur.com/OZyFuz0.jpg

  http://i.imgur.com/2O0J3aE.jpg

  http://i.imgur.com/exAy5RG.jpg

  It's the event viewer:

  Event type: error
  Event source: MsiInstaller
  Event category: no
  Event ID: 11721
  Date: 26.6.2015 г.
  Time: 18:47:40
  User: HPREDDY-79F942C14\Yasko
  Computer: YASKO-79F942C14
  Description:
  The description for the event (11721) in Source (MsiInstaller) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: product: HP Support Solutions Framework - error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: UnregisterAclmControl, location: C:\Program Files\Hp\Common\AclmControl.exe, command: /unreg; (NULL); (NULL); (NULL); (NULL);.
  Data :
  0000: 7 b 46 43 33 43 32 42 37 {FC3C2B7
  0008: 37 36 38 30 30 34 7-6800-4 2d 2d
  0010: 38 43 36 41 31 35 44 8 C 6-A15D 2D
  0018: 2D 39 44 31 30 33 31 31 - 9 D 10311
  {0020: 33 30 43 31 36 7 Dec 30 16}

  =====================================================================================

  Event type: error
  Event source: app error
  Event category: no
  Event ID: 1000
  Date: 26.6.2015 г.
  Time: 18:56:14
  User: n/a
  Computer: YASKO-79F942C14
  Description:
  Failing application plugin - container.exe, version 38.0.5.5623, failed module mozalloc.dll, version 38.0.5.5623, address 0x00001aa1 failure.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data :
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 70 6 c 75 plu ure
  0018: 67 69 6th 2d 63 6f 6 74 gin-cont
  0020: 61 69 6 65 2nd 72 65 78 ainer.ex
  0028: 65 20 33 38 2e 30 2e 35 e 38.0.5
  0030: 2nd 35 36 32 33 20 69 6th en.5623
  0038: 20 6 d 6f 7 a 61 6 c 6 c 6f mozallo
  0040: 63 2e 64 6 c 6 c 20 33 38 38 c.dll
  0048: 30 2nd 2nd 2nd 35 35 36 32.0.5.562
  0050: 33 20 61 74 6f 20 66 66 3-off
  0058: 73 65 74 20 30 30 30 30 put 0000
  0060: 31 61 61 31 0a 1aa1 0D...

  Found the solution. The problem was that I had Microsoft .net Framework 4. After that I went back to 3.5, the driver through the installation went perfectly. Thank you guys for the effort.

• Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

  can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

  Maybe it's because I disabled the camera to prevent other people using the computer?

  [Moved from comments]

  Hi Marrcel,

  Thank you for keeping us posted.

  The issue can be due to turning the camera off. I suggest you to activate the camera and try.

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.