XP hang on to the restoration of the system during installation error: no changes have been made to your computer to choose another restore point restart the system restore

Similar Questions

• Trying to system restore but impossible - error: no changes have been made to choose a different restore point and try again

  Windows vista system restore error: no changes have been made to choose a different restore point and try again. I did and got the same answer. dirtied with services before that, so why I did a restore. go to services and everything works again no luck.

  Hello

  1 Norton will interfere with system restore

  If using Norton, disable Norton Protection inviolable, use SR.

  2. try Safe Mode system restore:

  And here's how to go in Safe Mode options; select Safe Mode from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  3 malicious software stops the restoration of the work system to protect themselves from coming off.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• I can't reset or refresh my Windows 8. When I try the message appears: THERE WAS A PROBLEM RESET YOUR PC, NO CHANGES have BEEN MADE.

  I bought my PC about year ago. I have windows 8 installed from the beginning. Right after the purchase, I was told by the shop assistant to reset my Windows, so I did as Fallows: parameters - parameters Change PC - general - all remove and reinstall Windows---> who he was. It went ok, no problem, no need to insert additional disks (which I did not at the time of the purchase, by the way - saleswoman told me that recovery of windows, the files are already on the hard drive).  so now after 1 year I am planing to reset or at least update my PC again... but I IMPOSSIBLE. Whenever I try to do the same procedure as described above, I got this message: THERE WAS A PROBLEM RESET YOUR PC, NO CHANGES have BEEN MADE. and that's it!. I have absolutely no idea why. I restore the previous settings of Windows work, with the hope that it will help, but it didn't. Still can not reset my Windows. Anyone have this problem too, or if she had.

  I have attached the picture with this message for a better understanding

  Yes, I bought my PC (Dell) with 8 Windows preinstalled, I was just curious to know if there is a way to extract the product key for the version pre-installed (just in case). Thanks for the support, I will try your method "to create installation for Windows 8 media. But the real question is why I get this message when I try to reset the system "There WAS a PROBLEM of RESET YOUR PC, SUBI NO change".

  See here to prepare a Windows 8.1 with update 1 USB Bootable for installing with a UEFI BIOS from Dell:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

  Make sure that you select the correct edition.

  If your system does not on Windows 8.0 updated the BIOS with the latest version before using the installation media:

  http://dellwindowsreinstallationguide.com/updating-the-BIOS/

  The latest version of the BIOS can have improvements that will help the 8.1 Windows to run more easily.

  As you know Windows 8.0 Windows 8.1, I recommend a new installation of Windows 8.1 opposed to reset:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/Windows-8-1-installation/

  You can follow the optional procedures to wipe the drive before installing Windows 8.1:

  http://dellwindowsreinstallationguide.com/cleaning-up-a-drive-format-vs-secure-wipe-SSD-and-HDD/

  Once you have installed Windows 8.1, install all drivers needed Dell system in good order:

  http://dellwindowsreinstallationguide.com/downloading-drivers-checking-hardware-IDs-and-downloading-and-installing-Dell-system-drivers-in-the-correct-order/driver-installation/

  After that, you can install the latest version of Dell backup and restore:

  http://downloads.Dell.com/FOLDER02909509M/1/Backup-and-Recovery_Application_64M9D_WN32_1.8.1.71_A00.exe

  This will make a new internal recovery Partition which is Windows 8.1 with update 1 and not Windows 8.0. You can then do a backup and Dell recovery media if you wish:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery-1-8-1-71/#RecoveryMedia

• When you try to run an .exe file, windows will appear with a warning saying I don't have permission to use the file... and yet I used it earlier that day and no changes have been made on the computer

  I'm a gamer, I play world of Warcraft. A week ago, the shortcut of this game that was created through disk began to have a popup alert indicating * Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.* thing is, it was working fine a few weeks ago and no changes to the computer or the security settings. So I created a shortcut using the .exe directly instead of that the game gives us. Now yesterday I've played, got off, went to practice, returned, and it was blocked. There are no other files (that I know) have this problem, it's the unique. I am running vista Home Premium service pack 2 of the of the window on a relatively new dell 32-bit processor. I have absolutely no idea as to what caused this... anyone have an idea? Thank you.

  Justanotheridiot,
  If you uninstall Norton, you can reinstall and your subscription will remain current.  Just make sure that you are using the Norton removal tool to uninstall.  You can find on their Web site.  You also mentioned McAfee on your system.  If you have not used the removal tool they provide that I suggest to go to get it and run it before removing Norton.  I heard about problems caused by one of these programs being not entirely removed by using only the normal uninstall option.

  Also if you have not already done, right click on the file that you run and choose "Run as Administrator" and see if that makes a difference. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Default configuration of the Windows, restore features changes, do not turn off your computer error/loop - failed to get on the desktop

  Hi, I restored my Toshiba laptop yesterday afternoon, this morning, when I turned it on it started to configure the updates and let him be like that so I made breakfast.

  When I came back, I found this saying ' failure set features Windows restore changes do not turn off your computer ' its been like that for about 10 hours.

  I wonder how can I fix? I tried it turn on and turn off, but the same problem persists.

  It came with 8 Windows preinstalled thereforeI don't have the installation disk and I don't have access to the desktop

  Any solution please?

  Thank you

  Hello

  I'll get you the link and restore your computer to a previous working state.

  http://support.Microsoft.com/kb/949358/en-us

  Please reply with the status.

• Service Pack 3 has not finished click OK to undo the changes that have been made

  Internet Exolorer 8, service Pack2 installed.  Tent to download and install service pack 3 again, Error Codes: several years ago

  Not enough free space.  Free storage, Total currently 6.06 GB GB 32.3.  HP pavilion 551w.

  Error codes: 11/10/09 OX80070641, same code on 29/09/12

  04/07/13 code OX8024600

  Remove Service pack 3 and reinstalled several days ago:

  "Preparing for download.

  Backup of files

  SP3 backup file. CAB

  Backup registry

  Creation of Restore Points

  Download Service Pack 3

  The initialization of the made installition

  Win SP3 installation

  SP3 Setup file. CAB

  Error installing service pack 3 Service pack 3 installation did not complete.

  Select 'OK' to undo the changes that have been made.

  Access denied»

  Firewall and anti virus disabled for installation.  Graphic bar showed about 75 to 80% installation complete.

  So far I have not checked to undo changes.  With the od SP3 download I show 5.82 GB of free space.

  As I have not checked to undo the changes, no error code appears for this latest attempt to download and install SP3.

  When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"
  http://support.Microsoft.com/kb/949377

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Error message when you try to install Windows XP SP3: "you don't have enough disk space on % lecteur_systeme % to archive the uninstall files.
  http://support.Microsoft.com/kb/949375/

  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384/

• Default configuration of the windows updates. returning from changes. do not turn off your computer. (Infinite loop)

  Problem:

  • Computer: Lenovo N580
  • Windows 8
  • Reset my computer to factory reset
  • All my files uploaded to the computer
  • Launched about 120 windows updates
  • Now, the computer is stuck on the blue screen with the message that seems to never go "failed windows update Setup. returning from changes. do not turn off your computer"I can't access the login screen or any screen to disable the windows update.
  • I tried the solutions posted by other users with the same problem but without success.
  • Please help me with a solution where I don't have a factory reset because I don't have another copy of all my files!
  • Also, is there a way to access a safe mode on Windows 8? I tried F8 or SHIFT + F8 after starting, but nothing happens. I read a post online where Windows 8 have removed this feature. Is there another way?
  • Help, please! I AM ETERNALLY GRATEFUL!
  • THANKS IN ADVANCE!

  See: http://support2.microsoft.com/kb/949358/en-us (run a system restore)

  Perform the system restore from the recovery of Windows and check.

  (a) once you start your computer by using the Windows DVD or disc repair system, a black screen is displayed with the gray text "press any key to start from the CD or DVD. Press a button on any.

  (b) select the correct time and type keyboard.

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting in choose an option screen.

  (e) click Advanced options in the form of resolution of the problems.

  (f) select System Restore.

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Reference link:

  How to refresh, reset or restore your PC.
  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  If you don't have disc to install Windows or the system repair disc, contact the manufacturer of the computer.

  You can also refer to:

  How to create the installation media for a PC refresh or reset:
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• How can I add text to photos save to JPEG? The photos have been imported into my computer from a mobile phone

  How can I add text to photos save to JPEG? The photos have been imported into my computer from a mobile phone

  Hello

  What operating system do you use?

  You can use the paint on windows feature to add text on the pictures.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/paint (you can also use this article for windows vista)
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_paintbrush.mspx?mfr=true
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/mspaint_overview.mspx?mfr=true

• "An error in updating your system has occurred." Select 'OK' to undo the chnages that have been made.

  I install "WindowsXP-KB926139-v2 - x 86 - ENU"(power shell)
  at the end I have "an error in updating your system has occurred." Select 'OK' to undo the chnages that have been made. Windows XP 32-bit. Please help solve this problem. Thanks in advance.

  imran_iiui,
  When you look at your installed updates it appears as failed?  If Yes, what is the error code that you found?  Have you looked at the actual article for KB926139 and links for information PowerShell?  You can look through those.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What improvements have been made by the firmware update 1.0.2.0 video sx280 and aprox how much run time

  What improvements have been made by the update of firmware for sx280 & aprox 1.0.2.0 what run-time, you can get with the video shooting.

  Not another thread!

  Canon supports firmware solves the problem many others here have proven the opposite, it's the same thing on many other forums, not just this one.

  To find your answer, you look way, way back in the pages here:

  http://forums.USA.Canon.com/T5/PowerShot/SX280-battery-life-shooting-video/TD-p/22489/jump-to/first-...

  The result not only of the camera closing but many a time in his life of shots where lost because of the problem, I guess than that 'threw fat on the fire' so to speak.

  Dave

• You do not have sufficient access to your computer to connect to the selected printer

  I am a beginner to the field. I have recently installed windows 2008 standard edition and create a user and the user even working in the environment field. How can I installed printers installed on the servers. Whenever I click on any printer share the error comes from "you don't have sufficient access to your computer to connect to the selected printer. Client computers is teacher of Win Xp (Sp3) and the printer Kyocera FS - 1030D. Please go back. Waiting for your answer.

  Hi Shiju_Ganga,

  Your Windows 2008 server question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/winserverprint/threads

• Audio problems after transfer/download site asocoal Kaneva. It worked until the updates have been made? Internet problems now, explore the problems of transfer and data security?

  I was downloading my own music on a social site to Kaneva. They played very well until he had made a few updates. Problems with Internet explore every time I try to play the new songs just downloaded and you hear nothing. The old songs put forward the downloads continue to play very well. I have re downloaded and verified properties of each song, too, was done in the same way! What is a transfer or data of Internet Explorer security problem? The songs play fine on my computer, but will not play when downloading on Kaneva. This happened after a few updates have been allowed on my computer? What is DEP? Please help, we have meetings on Kaneva and this must be resolved.  Thank you!

  Hello

  I suggest you visit the link, below, that might help you.

  http://forums.Kaneva.com/archive/index.php/t-780.html

• "failed to set up the windows updates. returning from changes. do not turn off your computer.

  Hello

  I get this error "failed to configure windows updates. returning from changes. do not turn off your computer. The computer is a Samsung Ativ tab 5 and I got it for a little over a week.
  I have updated with the SW update
  The results of the troubleshooting online are:

  Problems encountered:

  Recent updates - not fixed installation problems

  Search for missing or corrupted - files detected

  Some security settings are missing or have been modified - fixed

  Registration for the service is missing or corrupt - fixed

  Windows Update error 0 x 80070490 (2014-02-10-t-11_25_11A) - fixed

  I have been through ALL the steps as described in http://support.microsoft.com/kb/949358. I have had no success.
  One thing that bothers me, is in the configuration of the system, I have a service called true vector Internet Monitor (Zone Alarm) and when the value disable as in http://support.microsoft.com/kb/929135, it is the only service still running when you perform a clean restart. I don't know if this affects the Automatic Updates/configuration or not.

  Hello

  Thanks for trying to help. Now my computer seems to be up-to-date.
  I followed your steps but MicrosoftFixit50202.msi did not like "my OS is incompatible. I use windows 8.  I couldn't run this in default or aggressive.
  I did go in Control Panel and disable antivirus and firewall Zone Alarm and reset Windows defender by default.
  I did IE default web browser I have prob changed when I got to the computer.
  I then returned to set up a clean boot and this time I managed to disable the true vector Internet Monitor (Zone Alarm) to run.
  I ran the reset troubleshooting of Windows with the same result as before is to say:
  Recent updates - not fixed installation problems
  Search for missing or corrupted - files detected
  I think I have restarted my computer at this stage and then tried to update again.
  It has not yet, but with the error, I got an error code and a link to help. I don't have not noticed this before. I followed the help and ran about 5 command prompts that have to do with the renaming of files I think.
  Then I tried updating again and this time 38 45 updates succeeded. I then ran the update again and it seemed to work on the other 7 updates.
  Although Windows Update said I was now updated, I was skeptical as when this whole thing started is started when I got the "windows installs updates" and then "failed to configure updates. Returning... etc"then I restarted my computer. At the start, there was no message on try to configure the updates, then, how do I know they are configured and working as it should?
  Thank you.

• After all the steps have been made and I clicked 'launch' I get the following message "Setup has detected that a machine restate may be waiting."  Exit Setup, restart your computer and try to reinstall.  What is a 'install '? and how do I

  After all the steps have been made and I clicked 'launch' I get the following message "Setup has detected that a machine restate may be waiting."  Exit Setup, restart your computer and try to reinstall.  What is a 'install '? and how to leave it. ?  I try to install 14 items. Anita

  If present, click the ignore button and check.

  No button ignore? If possible, please post a screenshot of the error.

• When I opened every day Premiere Pro it always says that I should check my account and I will not be able to use the work in a few days...  But I checked ve and my account is fine, all payments have been made. I m afraid that I have not access more in fe

  When I opened every day Premiere Pro it always says that I should check my account and I will not be able to use the work in a few days...  But I checked ve and my account is fine, all payments have been made. I m afraid I won't access more in a few days... What should I do to stay with my access?

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html