XP hangs when I try & activate after doing a repair installation.

Similar Questions

• Robocopy hangs when you try to copy a file which in use

  Hello

  I find that Robocopy hangs when you try to copy the file using, for example an Outlook .pst file. The behavior of Vista was not to copy the file according to the retry and wait switches from command line, which allowed the backup race move to the next file and finally finish. With Windows 7 the Robocopy session is suspended and resumes ever, even if the file she is trying to copy is closed.

  Is this behavior under Robocopy in Windows 7? Is it possible to get Robocopy to move to the file according to when he's trying to copy a file that is in use?

  Thank you

  Jason.

  "There is no need of me a pause in my script"-Yes, I understand [and should have done before].

  I just tested a network for the first time operation.  It hangs forever as your done even after I closed Outlook & waited for the w: 30 I put.  {I also ran with closed Outlook the first time just to make sure that the network itself had no problems}

  I read that you have provided the link.  This suggests that there is no solution.

  - - - - - - -

  You seem to be doing a lot more & probably more structured than mine operation, this workaround might not be of any use to you.  The other open files issue concerns a simple hourly backup of my kernel files that includes pst files.

  1 I xcopy all the files in a folder internal InterimBackup first.  Can I use XCopy or RoboCopy to send InterimBackup to the real destination.

  2 If Outlook is open then it will copy on InterimBackup and, if the previous Outlook.pst is still in InterimBackup she gets deleted by the attempt of xcopy.  [conclusion - XCopy verifies the existence of the replacement of a file, deletes it and only then discovered that the source file is locked and cannot be copied.]

  So I precede this with

  0 I run [if exists] copy D:\InterimBackup\Outlook.pst to D:\InterimBackup\Outlook2.pst

  The result is that whole process always ends but it only includes the last Outlook.pst that was available.  So I always make a point of Outlook to quit at some point during the day so that he could take part in this backup.

  If you have also tried this as a two part operation, your xcopy / robocopy in the folder InterimBackup would always succeed but would include only Outlook.pst if you had first closed the application.  Subsequent operation of RoboCopy would always succeed with the same possible omission.

  The downside of this might not suit your overall goal.  You'd have to RoboCopy separately all your others folder trees but keep the Outlook.pst in a tree that has not been included.  You could do this either by restructuring of your data or using RoboCopy exclude switches for the file Outlook.pst file.

  You have to accept that you might not be sure about the last time that the Outlook file had been included unless you had deliberately run the RoboCopy closing.

  I have reviewed this improvement by using Task Scheduler to respond in the event of closing Outlook and use it to initiate the copy outlook.pst to InterimBackup, then by running the part of the main operation on RoboCopy to this folder.  But my needs are so simple that I've never felt it's the logs of the events that I would have to put in place.

  As I say, it may not meet your needs.

• Computer hangs when you try to watch live TV through windows media centre__

  Computer hangs when you try to watch live TV via windows media Center
   
   
   
  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 3081
  More information about the problem:
  BCCode: a
  BCP1: FFFFFA600C193FF8
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF8000233499E
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\Mini112509-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-132569-0.SysData.XML
  C:\Users\user\AppData\Local\Temp\WERCC53.tmp.version.txt
  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
  

  Hi Eddie Hunt

  Welcome to the Microsoft Answers Forum!

  I suggest you try this method and check if it is helpful

  Method 1:

  Start your computer in a clean boot and check what third-party software or program is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to run check and clean boot if you have the problem.

  i. Click Start, type msconfig in the search box and press ENTER.

  II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  III. in the general tab, click Selective startup.

  IV. under Selective startup, clear the check box load startup items.

  v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  VI. click OK.

  VII. When you are prompted, click on restart.

  VIII. after the computer starts, check if the problem is resolved.

  If the problem is solved, check what third-party software or program is at the origin of the problem, referring to the link given below:

  Clean boot

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  i. Click Start, type msconfig.exe in the start search box and press ENTER.

  II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  III. on the general tab, click the Normal startup option and then click OK.

  IV. When you are prompted to restart the computer, click on restart.

  Method 2:

  Install the latest codec package and check if that helps, link below will help you with the same:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en

  Method 3:

  Update the graphics card. Steps to update the graphics card:

  i. click on start, type devmgmt.msc and then on enter.

  II. develop the graphics card and right click on the sub element and click on update driver.

  Link for reference: problems with watching TV on your computer

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my iphone hangs when I try to open the content of the email

  my iphone hangs when I try to open the content of the email

  What ios version do you have? It's 9.3? Because there is a bug in the most recent update, which can freeze your mail and Safari.

  Apple should have an update out before the end of week

  Fingers crossed

• Network error when you try to read from C:\Windows\Installer\iTunes.msi

  Original title: error when you try to install iTunes on Windows Vista
  I am trying to install the latest version of iTunes available in South Africa. I use Vista to the Windows Welcome page.

  I downloaded the itTunessetup.exe file, but when I try to run the installation, I get the same message "network error when you try to read from C:\Windows\Installer\iTunes.msi.
  I am at a loss to understand this - I'm not much of a PC expert either.
  Any suggestions? Thank you

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. I suggest you follow the troubleshooting steps to check if this may help.

  Method 1:
  Run the fix it and check.
  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  You can completely uninstall older versions of iTunes installed on the computer, then I suggest you to install the latest version and check.
  Download link

  http://www.Apple.com/iTunes/download/
  
  Method 3:
  You can try the form as follows article knowledge base and check if you are able to install iTunes.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Reference link:
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  If the problem persists then you can contact iTunes support: http://www.apple.com/support/itunes/
  Just reply with the results. I'd be happy to help you more

• App Gallery hangs when you try to save the changes

  After cropping of a photo in the gallery app, it crashes when you try to save changes to the photo. It does not occur when recording other changes.

  It is an Alcatel One Touch light on 1.0.1. But oddly enough the problem is more product. I'm still not sure of what caused it. Then... I guess I can mark my question as answered. Thanks for the reply.

• iPhone hangs when you try to unlock

  I have iphone with iOS 9.2 5s. When I try to unlock the phone by sliding from left, it shows the apple logo (as when you turn on the phone), waits a few seconds and returns me to the locked screen.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Windows Explorer (Vista) hangs when I try to access the Documents folder on a network computer running Windows 7

  Simply run the Windows Explorer on my Vista (desktop computer) machine and try to view or otherwise access My Documents directory on my Windows 7 computer crashes Windows Explorer (computers are connected at home).  Messages event viewer the following:

  Failing application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e02a1e, failed module ntdll.dll, version 6.0.6002.18327, time stamp 0x4cb74dd3, exception 0xc0000374, offset error 0x00000000000aca57, process 0xb64 id code, start the application time 0x01cc0fa1b28a295d.

  I tried several things to cure the problem without success.  My last attempt was to create a new directory on the Vista computer on the Windows 7 computer.  I then copied some files (using the Windows 7 machine) from the Documents directory on your Windows 7 computer to the new directory and was able to access it from the Vista computer.  I transferred then all the files in the Documents directory to the new directory (again on the Windows 7 computer).  Then, I deleted the Documents directory and renamed the new directory of Documents.  However, when I try to access the Documents directory on the Windows 7 computer from the Vista computer, explore crashes as before (see more top job Event Viewer).  Windows 7 computer is currently running Windows 7 Home Premium, and SP1 is installed as are all Windows updates.  I am able to access the directories music, Photos and videos on the Windows 7 computer from the Vista computer.

  Hello

   

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  See the link for further directions on scan SFC - below
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• WHY MUSE 2014.3 hangs when I try to SAVE or SAVE as?

  Please team MUSE, I need your help.

  MUSE never before failed for me... just after the update of 2014.3, it crashes when I try to SAVE or SAVE as... it freezes and I have to FORCE QUIT of MUSE.

  This site is already LIVE and need to make a few updates for today... I sent to muse-support@adobe.com attach the screenshot and the MUSE FILE.

  Their response is not clear... I don't know if they're going to do something or I need to do something in addition to what I sent... Please, I have a compromise with my client and I feel totally supported by you.

  Screenshot HERE

  

  Response of MUSE here

  

  Hi 1hausi, no, they do not have. However, I opened the other files of MUSE and they work well.

• my computer hangs when I try to update windows

  my computer crashes when I try to update windows and won't install, I'm under win. HP 7. and I try to do a factory reset of the box. My laptop Toshiba bought radio shack of two years ago.

  Hi Jeff,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, problems with the computer freezing when you use the Windows updates.

  Perform the steps in the link and check if that helps.

  Crashes Windows or freezes

  Note: Check the title which reads ' my computer crashes or freezes when it installs updates
   
   

  Meet us if you encounter any problems with the computer freezes or any other matter of Windows and we would be happy to help you.

  Good day!

  Hope this information helps.

  .

• PC hangs when you try to work on documents dpf

  When I try to work on a pdf document or copy a pdf document, my computer freezes and I have to force my computer to shut down.  Can you help me with this problem?

  Bernice

  
  

• Why Lightroom 5.7.1 hang when I try to import?

  I have Lightroom 5.7 and have just updated to 5.7.1 and get the same result. It crashes when I try to import photos. I tried previous updates as well and get the same result. On each attempt of 50th to import it will be finally I would like to import. I don't know, but he would have nothing to do with having several hard drives on my computer?

  but when you import--you connected?

  Please try do unplug the phone and let us know if it happens again.

  Thank you

  Ignacio

• I have windows XP SP2 and when I try to install SP3, the current installation stops the computer stops.

  I was recently given an older laptop. I have windows XP Home Edition SP2. When I try to update windows, update web site scans my pc and says I need to install SP3 to update other windows. It downloads, but it starts to install, at Midway, the PC shuts down. When I power backup, windows starts to load, but discounts can go back every time. Only way I can get windows to work again is to join the conservation program and windows restore to before sp3 install atemp. I discovered that I need to install microsoft .net framework 2.0 SP2, but as it tries to install it, it stops and gives me an error code 1601. What is the problem and what can do to reslove? I don't know any history of what has been done until I got it. I know it works, but without SP3 and needs updated to work correctly. What can I do?

  Hello Chris3535,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it seems that you are having problems with Windows XP Service Pack 3. As I understand it, you cannot install Windows XP Service Pack 3.

  Step 1: check first pre - it not to install Windows XP Service Pack 3

  Steps to take before you install Windows XP Service Pack 3

  Step 2: Perform the steps in the link and check.

  You cannot install updates after a repair of Windows XP or after Windows XP SP3 is installed immediately after a new installation of Windows XP SP2

  Meet us if you encounter any problems during the Installation of Windows XP SP3.  or any other matter of Windows and I would be happy to help you.

  Good day!

  Hope this information helps.

• When you try to remove the program or installation, it says I installs another program when Im not

  When Im trying to remove the program or installation, it says I installs another program when Im not. It happened to me for a month.

  Hello

  Try to run it and see if the problem is resolved or not

  Solve problems with programs that cannot be installed or uninstalled

• When I try to launch Creative cloud of installation, browser window just continues to blink.

  I am trying to download Photoshop for the first time on Windows using Chrome 9. CreativeCloudSetup download fine but when I try and run it, it only flashes.

  I agree button to have 'Run', but still nothing more than a browser flashing for 15 seconds and then nothing.

  Any ideas?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.