XP has changed the user accounts is now impossible to access the administrator account

Similar Questions

• I just changed the administrator to standar account now the Dungeon of computer on request for the password that I continue to put the one I use to have but nothing happens whats rong whit this

  Just change the administrator account for standar now the computer keep on asking the password I continue to put the one I use to have but nothing happen how to find the password, usted an i have I removed it now what?

  Hello

  see if that can help you with this status has changed for the account

  worth a try

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  http://support.Microsoft.com/kb/940765

• How can I disable the popup control in the user account that appears on my desktop to allow or reject the changes when I open a program without changing my user account settings.

  Original title: uac

  How can I disable the popup control in the user account that appears on my desktop to allow or reject the changes when I open a program without changing my user account settings.

  You want should not do that. These pop-up UAC is there to ensure the interaction of the user before executing a command or program. Disabling, allows even unwanted programs (= malware, viruses, Trojans) go ahead and implement themselves on your system without being noticed.

• Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen.

  Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen, sometimes flashing. It is sometimes difficult to use the screen, especially when it has a dark background. It is a HP Desktop quad core with card Nvidia GEForce 9600.  I tried to roll back the driver, but that didn't help. I assume that the driver I need is no longer available. I also went to Nvidia to try to find a better driver that would eliminate this problem, but no luck.  Before, this came with an update on Vista, & I could correct in the way to roll back the driver. Any help would be appreciated.

  Go to www.nvidia.com and download the WHQL 306,97 drivers updated successfully.

  With the installation of Windows 8, Microsoft provides only the "bare" minimum drivers in order to complete the installation of Windows.

• What is this error represents "another user has changed the line containing oracle.jbo.Key [21 primary key]."

  Mr President.

  What is this error represents "another user has changed the line containing oracle.jbo.Key [21 primary key]."

  Concerning

  You get this exception quite often when you have a business in PL SQL layer, but you can safely ignore (suppress) it by substituting the lock() method in all implementation of your entity classes.

  /*** customizing locking management: 
  * Because attribute values can change 'outside' ADF standard life cycle, 
  * when optimistic locking executes, the exception "Another User Changed the Row" is thrown. 
  * In this case, we execute locking again, ignoring the exception 
  */ 
  public void lock() 
  { 
   try 
   { 
    super.lock(); 
   } catch (oracle.jbo.RowInconsistentException e) 
   { 
    if (e.getErrorCode().equals("25014")) 
    { 
    super.lock(); 
    } 
    else throw e; 
   } 
  }
  

• Another user has changed the primary key

  uses 11.1.1.5.0 - adfbc jdev
  
  After each insertion while saving the recording
  get error like this > > > another user has changed the primary key
  
  What should I do to avoid this?
  

  <?xml version = '1.0' encoding = 'UTF-8'?>
  <BC4JConfig version="11.1" xmlns="http://xmlns.oracle.com/bc4j/configuration">
     <AppModuleConfigBag ApplicationName="com.rits.glm.model.servicesAM.generalLedgerAM">
        <AppModuleConfig DeployPlatform="LOCAL" JDBCName="goodwell" jbo.default.country="IN" jbo.project="com.rits.glm.GeneralLedger" name="generalLedgerAMLocal" ApplicationName="com.rits.glm.model.servicesAM.generalLedgerAM">
           <Database jbo.locking.mode="optimistic"/>
           <Security AppModuleJndiName="com.rits.glm.model.servicesAM.generalLedgerAM"/>
        </AppModuleConfig>
        <AppModuleConfig DeployPlatform="LOCAL" JDBCName="goodwell" jbo.default.country="IN" jbo.project="com.rits.glm.GeneralLedger" name="generalLedgerAMShared" ApplicationName="com.rits.glm.model.servicesAM.generalLedgerAM">
           <AM-Pooling jbo.ampool.dynamicjdbccredentials="false" jbo.ampool.isuseexclusive="false" jbo.ampool.maxpoolsize="1" jbo.ampool.resetnontransactionalstate="false"/>
             <Database jbo.locking.mode="optimistic"/>
           <Security AppModuleJndiName="com.rits.glm.model.servicesAM.generalLedgerAM"/>
        </AppModuleConfig>
     </AppModuleConfigBag>
  </BC4JConfig>

  a few suggestions
  Houston-25014: another user has changed...
  http://adfhowto.blogspot.com/2010/12/troubleshooting-another-user-has.html
  Another user changed the row with primary key

• How to change the administrator user

  My brother has changed the only account on my computer a regular account, and now because of this I can not install stuff etc, because I'm not an administrator, and I can't change my account type because only Admins can do that and I tried allow the all-powerful administrator user , but I can't, advice on how to solve this problem?

  Try to start in safe mode. If and only if there is no administrator account Windows won't allow the master account administrator mode without failure.

• Channel showing incorrect programming once the service provider has changed the order of the range Guide

  Guide for Media Center channel problem

  I run vista with the latest version of media center.  My kansas city local cable provider has changed the alignment of channels.  Thus, for example, channel 69 used to be channel history but now 27 is historic canal.  The guide and registration for Media Center shows now incorrect channels and registrations.  I tried the guide update and registration, but it still shows old data.  My cener media shows that it gets data from zap2it.  I got their number and called.  Looking at their site they show the right channel of the station link.  According to them, microsoft is a customer of thiers and regularly updates the info.  So my question is how to get microsoft update so that I can get the right channels to save?

  Both Pitter and bariley:
  in particular, given that your lists as Zap2It are correct, you must submit a Guide data quality feedback form to http://thegreenbutton.com/dqs/Default.aspx (these are sent directly to the persons concerned to the millisecond).

  For Pitter:
  Be a CableCARD card user, you are reliant on two updated data Guide to day, and on your cable company sends a card channel updated timely (and, it varies depending on how it works, as the case may be, you may or may not have a Tuning adapter)
  If you do not have a TA, there is a 'clear channel map' function in the web interface of the InfiniTV4.  If you don't have a TA (or two), then you should do a power reset on him (them), to force them to download a new map.

  HTH,
  Chris

• You cannot change the administrator account

  Original title: sdasdasdas

  I ca't change on my computer, my OS is windows 7 when I try to change administrator, it asks for a password when I put my password it say "" connection failed: the user did not request type of login on this computer "for this reason I'm stock on my user account and I can not install all the tools" because he has an administrator privileges. pls help me. ?

  Hello

  It seems that you cannot change the administrator.

  Perform the steps mentioned below and see if it helps.

  a: Click Start and type gpedit.msc in the Start Search area and press on Enter.

  b: Navigate to the following location
  Computer configuration / Windows Settings / Security Settings / Local political

  c: Under this click user rights assignment.

  d: Double-click access this computer from the network and verify that EVERYONE is added to the list.

  e: Otherwise add it by clicking Add a user or group , and then type EVERYONE, click OK and then apply and OK.

  Hope this information helps.

• Cannot change the administrator account!

  Hello. I need to change my administrator account so I can make changes to my accounts on the internet, but my internet provider told me I'm just a standard user in Windows 8 and I need to change it to the administrator. When I try to change my profile from standard user to administrator, Windows 8 doesn't let me, even if I am logged in under my account from Microsoft. How can I change this? It is quite frustrating!

  Hello. I need to change my administrator account so I can make changes to my accounts on the internet, but my internet provider told me I'm just a standard user in Windows 8 and I need to change it to the administrator. When I try to change my profile from standard user to administrator, Windows 8 doesn't let me, even if I am logged in under my account from Microsoft. How can I change this? It is quite frustrating!

  Hello

  You cannot use a Standard (Local) account to change the administrator account. You can only use an administrator for this account.

  Open the control panel (place the cursor on the bottom/left corner of the screen... and right click, select Control Panel from the menu

  In Control Panel, select user accounts.

  Select Manage another account.

  This will show all the user accounts on the computer. If there is an administrator account, it will show this designation.

  To log off and log on with an administrator account.

  Back to the account user/screen control.

  Select Manage another account , then select the Standard account you want to change.

  Select the option Change the account Type .

  Select the administrator option to change the account and click Change the account Type .

  If there is no other administrator account, let know us and we can try another method of recovery.

  Tell us what you find.

  Concerning

• iTunes has changed the order of songs on an album. How to restore the original order?

  I have a classic album. iTunes has changed the order of the songs. How to restore the original order?

  Order of songs is controlled by the number of drive and the beaches. Set them accordingly.

  TT2

• Since download IE9 has changed the font on my message preview, on Windows Mail panel, and the symbol of the attachment is not there. How can I change this back?

  Since download IE9 has changed the font on my message preview, on Windows Mail panel, and the symbol of the attachment is not there.  How can I change this back?

  Just go in the Panel. Programs and features and then click on the left of "view installed updates" and find Windows Internet Explorer 9, and then you can uninstall it.  You should know that it is installed automatically via Windows Update, so you'll need to keep it to be reinstalled.  I think you can go Windows Update manually, and then it will ask you, then you can't deny it there and it should stick.

  Steve

• New update has changed the way to import pictures

  I don't like how Adobe has changed the way to import pictures after the update. Is there anyway to go back to the old?

  I really don't like this new import feature.

  Adobe product designers rarely participate in this forum. Please add your vote and view detailed in the official Adobe feedback forum: Lightroom: restore the features removed import into LR 6.2 / CC 2015.2. More people who vote, the more likely Adobe will pay attention.

• Hello. Why have I not once the upgrade has changed the menu in Russian?

  Hello. Why have I not once the upgrade has changed the menu in Russian? I want the English as I had initially. The menu has only Russian. What should do?

  Photoshop CC2015

  Cloud creation help / solve the installation language. Creative Cloud applications. CCM-

  http://helpx.Adobe.com/creative-cloud/KB/change-installed-language.html

• How can I change the administrator password?

  I use a Windows 7 computer. I open cmd.exe to laugh and try, I've been on the standard user account, I changed the administrator password and I do not know. I don't have a reset boot disk.

  With a Dell with Windows 7, you press F8 at startup, not Ctrl + F11

  CTRL + f11 was for XP and Dell.

  "How to restore your Windows 7 computer to factory settings.

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?docid=125843

  To restore your Windows 7 computer to factory settings

  1. Back up important files and data. If you do not back up your files, you will lose them.
  2. Turn off your computer.
  3. Disconnect everything but the monitor, keyboard, and mouse. This includes your:
     • Scanner
     • printer
     • modem or network cables
     • mobile phone and Tablet
     • Another external hard drive or USB flash drive
  4. If your laptop is docked, remove it from the docking station.
  5. When the Dell logo appears, press F8 several times to open the Advanced Boot Options.
     Note: If does not open the menu Options Options Advanced, boot wait for the Windows login prompt. Then, restart the computer and try again.

     
     

  6. Use the arrow keys to select repair your computer, and then press on entry.
  7. In the System Recovery Options menu, select a keyboard layout and click Next.

  8. To access the recovery options, log in as administrator and click OK to open the Dell Factory Image Restore .

  9. Depending on your configuration, you may need to select Dell Factory tools, then Dell Factory Image Restore.
  10. Click next to open the menu to confirm the deletion of data.

  11. Select the Yes, reformat hard drive and restore the system software of box condition factory and click Next.
      Note: The restore process begins and may take five or more minutes. A message appears when the operating system and the applications installed in the factory have been restored to the State of the plant.

      
      

  12. Once the complete restore operation, click Finish to restart the computer.

  13. Restore all data or programs that you want to back up files.
  14. See you soon.