XP Home BSOD after return from standby (Standby).

Similar Questions

• Satellite A30: System busy after returning from standby

  My abrupt A30 Satellite developed a problem when returning from standby mode. The system busy "Hourglass" is constantly and will not die. I have reploaded the power management utility since all options in 'Properties of power Option' are grayed out except for the "Power Meter" tab. It did make a difference.

  This problem appears at the beginning?
  Maybe the operating system has been installed there several times and now the registry entries are corrupted.
  This is why the system busy hourglass may appear.

  I m not 100% sure that this will help, but maybe you need to reinstall the whole OS
  On the new OS installed should all work a lot faster

• Gel after returning from standby

  Windows 7 64 bit

  I use a lot of waiting. After that I wake the computer from sleep mode, it works as expected; but sometimes, when I run a program (usually VLC), the PC freezes, more input not possible, hard power off required. This isn't a problem of input device. The power button on my computer should cause the PC to stop but does not either when the system is frozen.

  If I do start VLC (or another program that causes the gel), the PC would either freeze during shutdown (power off), or follow these steps if I started the day before: the rotation of the drives down, monitors are not getting a signal more, cooling fans and the CPU fan still spinning. After about 5 minutes the PC turns off hard.

  When I turn on the PC after a hard stop, the message "Windows is not stopped correctly. You want to try safe mode? »

  I composed the PC myself, so I have to identify the material originally from the problem... If it was caused by the material. I know that it's not caused by my hard drives of 2 TB. I know there is a similar problem, caused by the slow rotation of the 2 TB drives implementation. I tested my system will detect the connected disks and it still frozen. Disable all startup items has not solved the problem.

  Here is a list of my equipment:

  Mobo:
  980DE3/U3S3
  CPU:
  AMD FX 8320
  RAM:
  2x8GB crucial DDR3 of Sport
  Video card:
  ASUS Radeon R7260X, PCIE
  HARD DRIVE:

  Crucial MX100, SATA (SSD)

  various bis Magnetfestplatten 2 TB

  OPERATING SYSTEM:
  Windows 7 64 bit

  POWER SUPPLY:

  800W

  Yet another update:

  I recently installed Windows 7 new and frost have yet taken place. Only a few programs have been used:

  Chrome, Skype and VLC (since these seem to 'help' freezes)

  I also tried Ubuntu, where the system does not freeze. This could be because Ubuntu uses a different expectation.

  Currently I am in my old Win 7 installation and try different programs, not only not their use.

  Firefox instead of Chrome-> gel

  No VLC-> gel

  No Skype-> gel

  Thus, any of these programs makes my PC freeze

  ASRock (my mobo manufacturer) suspected hardware fault. Alas, I can't trace it either PSU or mobo.

  Install Windows 7 from scratch, I realized sleep (aka standby) is usable only if the video card drivers are installed. It may be that this device / driver is the culprit?

  Edit: it seems I found what caused the problem: Reader adobe flash (plugin). Since it is used by Chrome and firefox in watching Youtube, my system froze with the two programs. Since I updated the driver (including firefox only suggested) no more freezes have been held since a few days now. This may be premature if. I will present after a while to confirm.
  Meanwhile, I post a link to a thread that seems to focus on the same problem:
  http://www.TomsHardware.co.UK/Forum/67304-63-Flash-content-freezing-computer

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• BlackBerry smartphones impossible to update the applications after returning from deployment

  I really send an SOS to you all, but right now I need help.  I've just returned from a seven-month deployment and was not able to use my new 2 "BOLD" for the duration of my output.  I forgot my answer to the question on my security question and impossible to reset my password.  Who should I contact to get a discount to re-set for my account?

  Hi and welcome to the forums!

  If you are referring to the security password to unlock your device, you will not be able to recover it or changed it. You will have 10 attempts to open it and then our device will perform a security wipe.

  If you are referring to your selection of the site password BIS forgotten password. You will receive a PIN message with your password.

  If your device does not work, use the attached link to get all the necessary information and then call your operator.

  Thank you

  Bifocals

  KB10385 Several attempts to enter a password prompt a warning that data will be erased from the BlackBerry smartphone

  KB04665 NSE, MEID, ICCID, IMEI, IMSI, PIN and SIM

• X120e bad DIMM location. System does not return from standby mode

  Hello. I have a X120e running Windows 8.1 Pro x 64.

  I just put the unit to 4 GB of ram (2 x 2) of 2 GB (1 x 2). Whenever the upper DIMM Slot is used, the system will not leave standby mode and all power, including the battery must be removed from the system so that it works normally again.

  Of interest, all the ram tested with Memtest86 +.

  If it's important the system has the e350 CPU and a 320 GB HARD drive.

  Let me know if you have any input.

  Thank you!

  Update: I've updated the BIOS from 1.16 to 1.17. The system now between and leave pending normally as it should, with the two occupied ram slots.

  Of interest, none of the BIOS settings changed after the update.

• Mouse pointer freezes when returning from standby mode. I have to restart to solve this problem

  I re install mouse drivers. Everything else seems ok

  I finally found a solution for the mouse freeze problem which has been a pain in the A * because I bought the wireless mouse and used with my Windows 7 laptop. Try it to see if it works for me.

  THE MOUSE FREEZE PROBLEM SOLVED! (HOPE THIS HELPS)

  >>
  Mouse freeze problem is more likely to be linked to the USB SUSPEND MODE as most mice now use the USB port to connect the blow in.
  >>
  You can try this out. It works for me.
  >>
  Go in select
  >>
  According to what plan of power, you are 'Balance' or 'Power Saver', select the accordingly
  >>
  Select and expand <+USB settings="">by clicking the <+>sign
  >>
  Enlarge it <+USB selective="" suspend="" setting="">by clicking on the <+>sign
  >>
  Set both & on "Disabled" and click 'Apply'
  >>
  GEL MOUSE (SUSPEND) PROBLEM HAS DISAPPEARED FOR ME!
  >>
  Hope it will be useful.
  >>
  See you soon,.
  >>
  cybersam999
  >>

• No sound after resume from standby or hibernation

  Any time I put the machine sleep or Hibernate mode, the audio does not work on CV.

  It shows the bars moving in the control volume and all compatible audio devices, but no sound.

  I tried solving audio problems with no result.

  This problem can occur if the driver is not compatible with Windows 7 64 bit. Have you tried installing the driver in compatibility mode?

  Have you contacted Gateway to obtain the driver for Windows 7?

  Check if you have any audio driver update in Windows Update.

• V3 - 722G several BSOD after return to Acer repair

  Hello guys,.

  Short version:

  I'll be back just my laptop ACER repair center and I just did a complete reinstall of windows 8 with my USB stick recovery.  I spend about 15 to 30 seconds in the home screen accepting the agreement, computer name, etc., and the computer restarts with a BSOD.  I've seen 2 different BSOD so far:

  DRIVER_VERIFIER_DETECTED_VIOLATION

  UNEXPECTED_KERNEL_MODE_TRAP (nvlddmkm.sys)

  I really want to avoid sending this laptop to a 2nd repair, any ideas?

  Long version:

  I sent my laptop in for repair 2-3 weeks after the purchase when I noticed the 750 M from NVIDIA had stopped working a FAILURE of TDR video associate and I could no longer access NVIDIA settings.  The computer was essentially back to entirely using integrated graphics card intel (and it was very obvious of games with epic FPS loss). I've tried every driver wipes, reinstalls, different versions, spyware scans, analyses anti-virus, OS repairs, even tried wiping the computer clean with my recovery USB and reset the laptop back to finish on the default values of the box.  No luck, so I sent it to Acer repair center and they supposedly don't set.

  Well a month later, when I get it back, I turn it on and everything seems to work fine, so I'm going to update NVIDIA drivers to the latest version and Ottoman.  Computer BSOD over and over.  Tried to go back to older drivers and other versions with no luck.  I finally gave up and AGAIN completely erased and restarted my computer from scratch using my USB recovery.  But this time, I can't get past the screen of welcome/configuration windows 8 without it BSOD'ing with the above mentioned messages.  I tried to reset/wipe the computer AGAIN, I have tried refreshing, I tried running and disabling driver verification command line.  I tried to start windows with a low resolution.  I tried to boot into safe mode (cannot do installation in safe mode).  I tried to disable driver signature checking.  I tried over and over to auto repair.  I tried to isolate / removal / replacement of the RAM.  Heck, I even tried removing the WLAN card.  I'm out of ideas.  I was Googling for hours trying to find similar problems and have not met many solutions where people are stuck on the welcome/configuration with BSOD screen.

  The worst part is that I wrote on the box, I sent to the repair center I troubleshoot-performed and concluded that a video card failure or breakdown.  When they sent the laptop to me, the video card is not replaced.  In fact, no hardware has been replaced.  I would be not sent the laptop in a repair center after hours of troubleshooting if I didn't think it was a hardware problem.  The real diagnosis on my repair slip read: 'enabled Intel graphics.  All video past card tests. "Oh really?  Graphics card intel enabled?  I don't want graphic card intel, I want my paid for NVIDIA GRAPHICS!  You're killing me, Acer.

  This is my first purchase from Acer and I'm banging my head on the walls.  I'd like some suggestions.

  --------------------------------

  System:

  Aspire V3 - 722 G-9829

  All of the components that are currently in stock

  Hi simplifies

  I'm sorry to hear about the problems you've had, but I think that the only solution is to speak to press again for a 2nd repair.

• Cannot delete messages in Windows Live Mail after returning from 10 of Windows to Windows 7

  Separated from this thread.

  Hello. Want to jump in here even if it is an old thread. I have the same problem and have tried all the suggestions, my problem actually started when I upgraded to my wife and many win 10 is not ready for the change, so I'm back to Win 7 Home Premium. I contacted Ms. Tech Chat and was told to uninstall Windows 7 to "perhaps" to solve the problem. This is not acceptable. Everyone has to come with a fix or work around.

  Want to jump in here even if it is an old thread.

  It is rarely a good idea. If the solution has not worked, it is always best to use the option to ask a question on the menu to participate to start your own thread. There are so many variables involved that universal solutions are difficult to find. This is especially true when the title of the thread in the validation is not specific. For example, you also see a reading UID store failederror message?

  I have the same problem...

  I doubt it, because...

  ... my problem actually started when I upgraded to win 10 and... returned to Win 7

  It's a completely different scenario that could not arise last May when the thread you posted in was up-to-date.

  It seems that many of those who go back to Windows 7 from Windows 10 experience a corruption of the store folder (the folder where messages, calendars and the account settings are stored). According to your storage folder is how complex (several accounts, calendars a lot, a lot of messages number of files), it can be simpler to just create a new storage folder and fills again:

  1. Looking at your list of messages in Windows Live Mail, press Ctrl-Shift-O for Options. On the Advanced tab, click Maintenance and then store the file. Copy the path to locate the storage folder.
  2. Close Windows Live Mail and wait a few minutes (the program will continue to run in the background, while he does his household).
  3. Press the Windows key + E to open an Explorer window, and then paste or type the path that you copied to the (1) in the address bar and press ENTER. This should open your storage folder.
  4. Right-click on the name of the folder in the navigation pane, and select Rename. Call the Live Mail Backup.
  5. A repair must check that all the program files are present and correct and properly registered, as appropriate. To do this, close all running programs, and then press Windows key + R, type wlarp and press ENTER. In the window that opens, select repair all Windows Essentials programs:

     

  
  When it is finished, restart the computer.
  1. Start Windows Live Mail and wait the program installs before doing anything. Press Ctrl-Shift-T to start the add your Assistant e-mail accounts and follow the prompts to add your e-mail accounts.
  2. Click once on the work online on the status bar and deconnecter disconnect Internet to avoid interference email downloads, and then use the file > import messages (I Alt - F) and point the wizard to the Live Mail Backup folder level. Do not intervene while the import happens.
  3. Leave the program alone for a while (an hour or two, or even a night or more) to enable him to reindex all your messages, then close and wait half an hour for the program to do his household.
  4. Relaunch the program and look at your messages under folder imported into storage folders. Take it slow, drag files out of any folder and drop in the location you want. Again, give the program time to re - indexing messages in their new location.

  Note that you can not drag files out of storage files. If you want to forward messages to a high plu account folder in the folders pane, you need to select messages to transfer, and then use the right click > move or copy folder. The controls are also available as buttons in the folders of the Ribbon tab.

• How to fix 7B BSODs after migration from Windows XP sp2

  Problem: Blue Screen Of Death (bsod) 7 b immediately after the migration wizard built the virtual machine.  Safe mode does not work and results in even.  Last step reported is mup.sys.

  What I want to do: go to the macbook pro and be able to run my old Windows apps (MSoffice, Quicken, with my office vpn, etc) on my migrated files.

  Host: macbook pro, max OS X 10.6.7, 2.3 GHz Intel i5, 4 GB 1333 Mhz DDR3

  Running VMware Fusion v 3.1.2 (332101)

  Comments:

  Value of the property

  ------------------------------------------------------------------------------------------

  Model KT333CF-8235

  AMD Athlon XP processor

  CPU Socket Socket

  Upgrade processor support ZIF

  System slots 4 PCI, 1 AGP

  Type of machine AT/AT COMPATIBLE

  Space disk C: 9 GB available, 39 GB Total, 9 GB for free

  Disk D: accessible 10 GB, in Total 19 GB, 10 GB for free

  Disk E: 18 accessible GB, GB 107 in Total, 18 GB free

  Disk F: the 16 GB available, altogether 48 GB, 16 GB free

  Drive T: 8011 MB available, 8056 MB in Total, 8011 MB free

  1024Mo of physical memory total, 144 MB free

  Memory load 85%

  1952 MB of virtual memory total, 1152 MB free

  SwapFile 1024 MB

  OS Windows XP_Home sp2

  Installed the VMware tools: version vmware-converter 7.0.1.6272

  ==================================================================================

  What I tried:

  Boot into the bios and check the settings:

  -My guest use IDE controllers to talk to 2 physical hd

  -having regard to the many KB articles on scsi drivers, but I don't seem to need any

  -the main drive has partitions C, D, E, F

  start of the repair console of sp2 cd-rom WinXP_Home

  -a ran chkdsk/p

  -a ran fixboot

  tried to repair the virtual disk using vmware-vdiskmanager

  each element runs great but continues to 7B bsod

  My copy of Windows XP_Home sp2 is a upgrade disk and I have the CD key

  the original version full.

  Attached:

  .vmx showing current config

  screenshots of bsod

  Hello

  Welcome to the VMware community forums.

  Looks like you have already tried a few things!

  You're right, normally a 7 b error is related to not having the correct scsi drivers installed, but that your virtual machine using IDE disks, is not what causing errors.

  I did a quick search on google and you should be able to disable the mup.sys (multi unc provider) that is used for novell networks using the windows recovery console, the problem is more likely to be due to a corruption of the windows registry.

  It's probably better/easier to run windows repair installation of windows.

  I guess you have your original windows machine always there in case that you need to return one step? If this isn't the case, so always make a backup before proceeding with the steps like these. Of course, you can also use the capture feature instant molten, but is never the replacement for a real backup.

  --

  Wil

• Portege R830 - 3G fails to initialize after returning from hibetnation

  Hello world

  I have had a Toshiba R830 for almost two years now and I love it. Even more after a few months at the time I discovered, he had 3G capacity.
  At first (with the original drivers) the capacity of the 3G does that 2 times on 3.
  Other times he would be stuck "initialization".

  I found and downloaded the latest drivers (as far as I could find) of this site and the problem is * mainly * gone but it's a pain when it happens.

  The only way I can get the modem working again is to a full reboot.
  I think it happens if I disconnect the session 3G until I put into hibernation the R830.

  Technical details:
  Laptop TOSHIBA R830 PT321A - 01 K 002
  Program TOSHIBA Wireless Manager version CXP 901 4396/41 R4C01
  Ericsson f5521gw for Modem Broadband Mobile TOSHIBA 15/11/2012 7.2.3.4

  Is there anything else I can do to fix this?
  Maybe a newer driver (even beta)? Another thing to check/set up?

  Thanks in advance for any advice.

  See you soon,.
  Andrew.

  > I think it happens if I disconnect the session 3G until I put into hibernation the R830.

  I have no experience in using 3G after the laptop wakes up from hibernation mode, but in my opinion a good idea to close the connection before going into hibernation mode.
  Should test this several times in the line to check if it s the solution.

• How to call the taskflow or bean method after returning from operational-stream-call activity.

  I use JDev 11.1.2.4.0.

  Here is my scenario:

  A page contains a table with a button 'Add' called a popup.  The popup has controls to select data and save/Cancel buttons.  The Save button calls a managed bean method will add a line to the iterator in the table is built on.  I'd like the table to refresh the closure of the pop-up window.

  This is how I implemented it:

  I have taskflow1 that contains an activity view (page1).  Page 1, I have a button that calls managedBean1.method1 () who does a job and returns a result of 'showpopup '.  ShowPopup goes to a task-flows-call activity, called taskflow2.  Taskflow2 has a point of view (page 2, which is presented as a popup) activity and a return.   I want to call a method in managedBean1 to refresh the table once the popup is closed and I can't understand the right way to do it.

  After writing this I wonder if I should create the popup in the calling page rather than creating a separate workflow.  I started with a separate workflow because the popup is a quite complex.

  Thanks for help.

  Rudy

  Add a listener to return the button 'Add '. It will be called by ADF Faces upon return of the taskflow. For example:

  useWindow = "true" windowWidth = "600" windowHeight = "400".

  action = "#{MyBean.Method1} '"

  returnListener = "#{MyBean.myReturnListener}" / >

  And the bean method:

  public void myReturnListener (ReturnEvent returnEvent)

  {

  Do something, for example to update the table on the screen

  AdfFacesContext.getCurrentInstance () .addPartialTarget (myTable);

  }

  NB. don't forget to mark the taskflow call activity to 'run as dialog '.

  If you need the taskflow return result, you can get it in the earpiece to return via the method ReturnEvent.getReturnValue ().

  Dimitar

• Impossible to install Acrobat Reader after returning from 10 Windows to Windows 7

  Hi, I tried all kinds of solutions to reinstall Acrobat Reader after you have reinstalled Windows seven. I get a message saying that the AcroRead.msi path is not available. I tried to use the cleaning tool and remove the Data/Adobe/Setup program and full of numbers, but it comes back!

  Help please!

  Hi and thanks for your response. I finally found a solution for download Winfix and to regulate the installation and uninstallation problem.

  The message that I continued to receive was the path to AcroRead.msi wasn't available.

  THX.

  Sent from my iPad

• Satellite L falls down after returning from the mode "sleep."

  My laptop has this bug, whenever he goes to "sleep" when it "wake up" the system said that Explorer windows stopped working and almost everytime I have to restart with the power switch. I changed the operating system from Vista to windows 7, but he continues to act like that. Someone at - it a solution?

  Hello

  For me, it looks like a Windows operating system problem.
  Maybe you should try a CCLeaner which cleans up the registry and other files on the HARD drive.
  You should also try to defragment the HARD drive.
  If no improvement is noticeable and Explorer windows would keep crashing, then a new installation of operating system is necessary.

  Good luck