XP Home Edition limited question user account windows updates.

Similar Questions

• XP Home Edition w / SP2 cannot access Windows Update or Microsoft Update. Error 0 x 80240036

  Windows XP 2002 Home Edition w / SP2 freshly restored on a laptop Acer Aspire. I can't access Windows Update or Microsoft Update. I get error 0 x 80240036

  Hi, DIY,

  Windows update no longer works if you don't have XP SP3 installed. To check your level of service pack system, click on start, run and type "Winver" in the Run dialog box and click on 'OK'.

  There are prerequisites for the installation of Windows XP SP3. You can find them by reading the link below.

  Steps to take before installing XP SP3

  http://support.Microsoft.com/kb/950717

  If your system uses one other than an intel processor(AMD...) , you must download and install (before installation of the XP SP3) a package of upgrades from the link below.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=230796A7-54D6-4C31-BDA3-EFD2F7E87A8C

  Download and install XP SP3 fron the link below. (Ignore the warnings on THIS subject the professionals and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this is useful to provide feedback. Good luck.

• Unable to access updates for windows xp home edition (sp3) via "Fix - it", Windows Update or Microsoft Update and Windows Update

  Hello

  I have download a new download "Fix - it"; all the convenience of work with the exception of "Windows Update".  Also I went through self-help suggestions in "go-microsoft", but nothing helped.  I also tried the "cmd" method (i.e.: start, run, cmd and then copy and paste each .dll for windows update); 1 a .dll could not be found, and two other 2 couldn't register.  After Windows Update represented existing 'cmd' method, I then, well my system recognized the appropriate software update and allowed me to press the 'Express' butotn to an update of high priority for installation (e.g.: Cumulative Security Update for Windows XP...) Sorry, but I forgot the KB #), unfortunately, he could not install, then I ran Windows Update again and pressed the 'Custom' button and three 3 software update optional appeared, as well as an XP update.  Once again, all the selected custom updates has not installed.  I am therefore at a disadvantage as to how I can access necessary security updates for my computer and would appreciate contact me promptly to address this urgent problem.  Thank you much in advance - arldarl

  Hello Tommy.

  Thanks for sharing the information above to remedy my Windows Update and please accept my apologies for my being too general with my question.

  After many hours of running the programs above, SuperAntivirus found 1 an Adware and 55 Tracking Cookies; MalwareBytes found 1 1 that a horse of Troy, and EsET found Trojan horse more!  My computer is vulnerable, so 'thank you '... I would never have known to load/run these particular l, and nor would I knew I had these TAPI problems in my computer.

  After several attempts of installing/re-installing 'Fix - it' (i.e.: deletion of multiple copies associated with my Microsoft Online ID), I was unable to make progress, so I ended up check my Services and found BITS to be set up as 'Network' instead of 'Local '.  I made this change, Windows Update, and the Cumulative Update has began to download - finally!

  I suspect that any of your suggestions, and my little trick got Windows Update to work?

  Thanks a lot a lot - arldarl

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Home Edition Code 80070490 failed to check updates.

  When you try to perform the dates I get Code 80070490 saying windows can't check for updates. What can I do?

  The following two links are compliments of the spirit:

  http://support.Microsoft.com/kb/958044
  You receive an error code "0 x 80070490" when you use Windows Update or
  Microsoft Update Web sites to install updates

  Try to reset the update components - use the Mr Fixit here:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Section user and Windows Update missing in the setting of the computer in Windows 8, as well as other errors.

  Section user and Windows Update section of the computer in Windows 8 setting is missing.

  Open Control Panel > user accounts > make changes to my account in the computer setting.

  "Page not found. Sorry, the page you requested is not available, or you have found an outdated link. "is displayed.

  I already tried Microsoft scanner security, sfc/scannow, auto repair and record using a hidden administrator account.

  My power plan option page is also absent and when tried to open the parameter, "unable to open the access control editor. the activation requires the display name to stand under the CLSID key. Also, while trying to open the properties of the network connection, "an unexpected error has occurred" appears. I don't know if these problems are related.

  I agee with dietydiablo, it was not pleasant to have to do a refresh and reload everything.
  Also use even win 8 Pro with WMC.
  I could not afford to wait and to solve the problems, and the update was a faster option. But I keep an eye on it now that if it happens again, I know when it happened.

• "limited connectivity" on after windows update wireless router.

  Original title: "limited connectivity" on after windows update wireless router. happens all the time after soundcards implemented to date. I then 'restore' on the eve of going online. Why?

  I have... 'limited connectivity' icon wireless router in the toolbar after windows updates. happens all the time after windows updates. I then 'restore' on the eve of going online. Why?

  Hello
   
  What operating system do you use?
   
   
  Method 1:
  Check the update has been installed and make a note of this update.
  To check, follow these steps:
  a. Click Start, in the search box, type in update
  b. click on windows Update
  c. click view update history
  Note: If this isn't a significant update, you can hide the update.
  To hide an update, follow these steps:
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  b. do one of the following:
  o click the link that tells you important updates are available if you have some updates to hide.
  o click the link that tells you optional updates are available if you have optional updates to hide.
  c. Select hide any update you want to hide, right-click and then click on update. Do this for each update you want to hide.
  d. click OK.
  
  If it an important update then you can try the following method 2:
  
  Method 2:
  Download the update of the article mentioned below (enter the number of the update in the search), put the computer to boot and then install the update and check if that helps:
  Download here: http://www.microsoft.com/download/en/default.aspx
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• Cannot remove or demote user accounts windows 7 Home premium

  I have an admin account on my computer which has a standard user account until my son has changed. When I try to downgrade by going to the page account in Control Panel and then clicking on change the type of account, and then click standard user, nothing happens. I tried deleating it's when I try to delete the account, even when I say delete all the files it will not erase. I tried the cmd on label office as command and the net/del user account and it says user name is not found

  currently impossible to check on a business trip, but if it helps you, it was done using a bootable iso program called pclogin now

  See my response to your other post. Please do not cross-post, as it leads to duplication of efforts. On the other hand, try to post all the relevant details immediately. Password cracking program 'PC connection' is very relevant!

• All user accounts Windows XPrestricted open all of a sudden 'Map network drive' by clicking on the desktop and the "research" by clicking on any folder

  Hello

  you have a problem with my Windows laptop that left me speechless.

  I would really appreciate if someone could provide a solution or any ideas where to start fixing this, as I get close to return to the previous backup full system, but reluctant to do so as I have never done it before so I'm worried if it really works as supposed (Macrium and Ping).

  1. description of the problem

  All users of Windows XP (SP3) restricted accounts open all of a sudden 'Map network drive' by clicking on the desktop and the "research" by clicking on any folder, including My Documents.

  However, all accounts administrator work as before and also user accounts work like so usual, they are included in the Administrators group, with respect to the clicks of the workstation and records.

  In addition, the correct icons for 'Drive' and 'Record' are visible when connected as long as administrator but lacking when logged as long as user restricted when you check the file associations by "open the folder and then click on Folder Options in the Tools menu.» Click the registry file types list. »

  2 solution unsuccessful attempts

  2. google and tried the solution to manually change the registry entries from Microsoft: http://support.microsoft.com/kb/321186

  "
  Start the editor of the register (Regedt32.exe).
  Look for, and then click the default value under the following registry keys if this problem occurs with folders:
  HKEY_CLASSES_ROOT\Directory\shell
  If this problem occurs with drives:
  HKEY_CLASSES_ROOT\Drive\shell
  Click on edit in the Edit menu.
  Type 0 in the value data box, and then click OK.
  Exit the registry editor.
  "

  (Fixit associated meanings has also not working for some reason, says that the Windows Installer does not run, don't know if the same problem...)

  2B. and then also tried the fix "regsvr32 /i shell32.dll" at http://blog.chron.com/helpline/2005/10/double-click-opens-search-instead-of-folder/.

  After these steps, the registry under "Drive" and "Directory" information are as attaché at the end read somewhere there should be a "find" under lock and key, as I have, but don't know if the subkeys under 'Search' are what causes weird behavior.

  If anyone knows and could provide what the values for the registry values must be in a system that works, would be nice to compare to possible problems.

  Unsuccessfully, with what precedes, to solve the problem, but noticed through that:

  2 c. When you are logged in as administrator, I am able to see and modify the registry keys concerned with regedit, considering that when logged in as a regular user, I get an error that translates roughly as "the key could not be opened [consultation]?.» Error in opening the key. "for"Default icon"and subkeys 'shell' to 'Drive' and some subkeys under"shellex ".

  Oddly enough, this is also the case even if I "Run with" regedit as a user belonging to the Administrators group when logged in as a limited user.  Could be the mechanism of Windows registry access.

  Noticed that the small group 'Users' did not have access to "Drive". Grant read access, even as the "directory" and other registry keys next to them, for "users".

  Now see the values of registry as a limited user, but the problem persists. Do you really know what to try next, after spending hours Googling for answers.

  3 computer laptop environment and other factors

  3. don't know if it's related, but perhaps that coincides the time and the possible reason of sage:

  I had the problem two days ago described in "account Administor doesn't have access to some files and registry entries" to http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_27415496.html.

  Zone alarm free firewall prevented changing the key of HKLM\SOFTWARE\Microdsoft\Windows\CurrentVersion\Run.

  Which was fixed as in the article above tweaking of Zonealarm settings so that changes are allowed.

  3. the environment of the laptop:

  Acer Travelmate 8204 laptop

  Windows XP SP3 with virtually all updates of installed Microsoft.

  Recent issues (related?) with the .NET Framework 4 updates and the repair facility. FixIt against MS to install MS Update and the Application works and reveals no problems, but the settings from-> Panel-> Add or Remove Applications said that it cannot change or delete NET Framework 4.

  ZoneAlarm Free Firewall version: 11.0.000.057, prevented possible culprit get earlier access to the registry, uninstall?

  Norton Antivirus version recently installed 20.3.1.22, possibly in conflict with ZA or bug?

  content 'Repertoire' 3 c registry key.

  HKEY_CLASSES_ROOT\Directory]
  "AlwaysShowExt"=""
  "EditFlags" = hex: d2, 01, 00, 00
  "ToolTip"="prop: DocComments.
  @=""

  [HKEY_CLASSES_ROOT\Directory\Background]

  [HKEY_CLASSES_ROOT\Directory\Background\shellex]

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers]
  @= "{5E2121EE-0300-11D4-8D3B-444553540000}"

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\ACE]
  @= "{5E2121EE-0300-11D4-8D3B-444553540000}"

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\New]
  @= "{D969A300-E7FF-11d0-A93B-00A0C90F2719}".

  [HKEY_CLASSES_ROOT\Directory\DefaultIcon]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
  65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 33, 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\Directory\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\Directory\shell\find]
  "SuppressionPolicy" = dword:00000080

  [HKEY_CLASSES_ROOT\Directory\shell\find\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,00,00

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec]
  @= "[FindFolder (\"%l\ ', % I ')] ""
  "NoActivateHandler"=""

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\application]
  @= "Folders."

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\topic]
  @= "AppProperties".

  [HKEY_CLASSES_ROOT\Directory\shellex]
  @=""

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers]
  @=""

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Advanced SystemCare]
  @= "{7C8D3E6A-13A6-4D8F-BF77-D267D0F9AC21}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\COMODOBackupUtility]
  @= "{FA66022E-2FE4-4A29-916C-84A0D8173FBB}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EDSshellExt]
  @= "{29FF7AB0-BE34-4992-A30B-53A9D86EE239}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EncryptionMenu]
  @= "{A470F8CF-A1E8-4f65-8335-227475AA5C46}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\IObit Malware Fighter]

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Offline files]
  @= "{750fdf0e-2a26-11d1-a3ea-080036587f03}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Washer]
  @= "{6EE51AA0-77A0-11D7-B4E1-000347126E46}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\CDF]
  @= "{67EA19A0-CCEF-11d0-8024-00C04FD75D13}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\FileSystem]
  @= "{217FC9C0-3AEA-1069-A2DB-08002B30309D}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Monitor]
  @= "{7842554E-6BED-11D2-8CDB-B05550C10000}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\MyDocuments]
  @= "{ECF03A33-103D-11d2-854D-006008059367}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Nokia]
  @= "{416651E4-9C3C-11D9-8BDE-F66BAD1E3F3A}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Sharing]
  @= "{40dd6e20-7c17-11ce-a804-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\UltimateZip DragDropHandler]
  @= "{2F860D82-AF3C-11D4-BDB3-00E0987D8540}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {1F2E5C40-9550-11CE - 99 d - 2]

  00AA006E086C}]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {596AB062-B4D2-4215 - 9F74-]

  E9109B0A8153}]
  @=""

  [{ECCDF543-45CC-11CE - B9BF - HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\

  0080C87CDBA6}]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {ef43ecfe-2ab9-4632-bf21-58909dd177f0}]
  @=""

  3D 'Drive' content registry key.

  [HKEY_CLASSES_ROOT\Drive]
  @= "Asema.
  "BrowserFlags" = dword:00000008
  "EditFlags" = d dword:000001 2

  [HKEY_CLASSES_ROOT\Drive\DefaultIcon]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
  65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 38, 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\Drive\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\Drive\shell\find]
  "SuppressionPolicy" = dword:00000080

  [HKEY_CLASSES_ROOT\Drive\shell\find\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,00,00

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec]
  @= "[FindFolder (\"%l\ ', % I ')] ""
  "NoActivateHandler"=""

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec\application]
  @= "Folders."

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec\topic]
  @= "AppProperties".

  [HKEY_CLASSES_ROOT\Drive\shellex]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Advanced SystemCare]
  @= "{7C8D3E6A-13A6-4D8F-BF77-D267D0F9AC21}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\COMODOBackupUtility]
  @= "{FA66022E-2FE4-4A29-916C-84A0D8173FBB}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\CWDDriveMenuHandler]
  @= "{CCEFA845-DCDB-4A2F-8BED-DBE87CD198EC}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\GizmoShellMenuExt]
  @= "{AF859436-B9BD-4154-B594-2B8D1F4295A6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Glary utility]
  @= "{72923739-5A47-40A3-9895-25AF0DFBB9E4}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\LavasoftShellExt]
  @= "{DCE027F7-16A4-4BEE-9BE7-74F80EE3738F}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Offline files]
  @= "{750fdf0e-2a26-11d1-a3ea-080036587f03}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ReflectShellExt]
  @= "{DEBB9B79-B3DD-47F4-9E5C-EA6975BAB611}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\SDContextExt]
  @= "{70F8E90E-353A-47AB-B297-C576345EE693}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Symantec.Norton.Antivirus.IEContextMenu]
  @= "{FAD61B3D-699D-49B2-BE16-7F82CB4C59CA}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {59099400-57-11CE - BD94-]

  0020AF85B590}]

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {D6791A63-E7E2-4fee-BF52-5DED8E86E9B8}]
  @= "Menu of portable devices.

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers]

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Drive\shellex\FolderExtensions]

  [HKEY_CLASSES_ROOT\Drive\shellex\FolderExtensions\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""
  "DriveMask" = dword:00000020

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ShellExt]
  @= "{0B0D0025-9D78-43BF-84EF-6F308AC4D0CE}".

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {1F2E5C40-9550-11CE - 99 d - 2]

  00AA006E086C}]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {596AB062-B4D2-4215 - 9F74-]

  E9109B0A8153}]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {B 7988, 573 - EC89 - 11cf - 9 c 00-

  00AA00A14F56}]
  @=""

  [{ECCDF543-45CC-11CE - B9BF - HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\

  0080C87CDBA6}]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""

  It seems that I managed to solve the problem on my own. Did two things:

  1 set the registry keys determine programs associated objects 'Répertoire', 'Drive' and 'File' to the default values by using the settings found here: http://www.dougknox.com/xp/file_assoc.htm

  HKEY_CLASSES_ROOT\Directory\
  HKEY_CLASSES_ROOT\Drive\
  HKEY_CLASSES_ROOT\Folder\

  2. If you want to have permissions for group 'Users' to read all these keys in the registry. For some reason any access worked only partly for standard users.

  Not sure who finally solved this problem, but after I had finished 1. and 2. for the purpose of 'Record', by clicking on 'My computer' and any folder works normally for all users of the computer.

  I suspect that some recent installation of program which adds actions associated with these objects messed up the registry. Suspects are Norton Antivirus and dbPowerAmp.

  Thanks for the suggestions for this problem!

• Empty user account window

  How to fix the empty window of user account?

  I've accessed Control Panel > user account, but when I opened it, it was only a blank window. The only thing left is the 'back', 'forward' and 'home' button What will happen? How can I fix it?

  This site has solved the problem immediately.

  http://WindowsXP.MVPs.org/useracc.htm

• I can't disconnect or change user account after update vista Home premium SP2

  Acer e380 with vista home premium 32 bit OS 3 G of Ram
  After the SP2 update successful that I don't then log off user accounts or to switch between user accounts

  When I choose logout of the system never disconnects, and I have to hard start
  When I chose to change username the same thing happen it never disconnects and I have to hard start

  I can access my different user accounts when restarting individually well but is not a viable solution as long as switching user accounts and logout worked just find before the SP2 update

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. Chances are that the "remains" of Norton here is your troublemaker.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3 uninstall Norton Security Suite [or keep constant Protection Suite if you are a Subscriber Xfinity] and LiveUpdate and start any Norton Add ons via | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  [Should be automatic, but I want you to check again.]

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #8 below!

  5. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.

  6. OPTION A: do a clean install of Norton Security Suite [or keep constant Protection Suite]; Follow all the instructions.

  NOTE: Do not activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  OPTION (highly recommended) B: Install Microsoft Security Essentials (also free but MUCH more reliable & less annoying).

  -Online do NOT install applications as well !<>

  7. If you take OPTION A to #6, manually & repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.  Otherwise, skip this step.

  8. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9 & IE7, too.

  8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  9. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  10. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [3]

  10. b double-click the file that you saved in # 10 above & accept invites him to MERGE with the registry data.

  11 restart again.

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  13. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  13 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

  c. 13, without taking into account of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

  14 restart once more and then run a manual updates & install any/all the updates available (for example, KB2722913 or higher); Follow all the instructions.

  15. open Internet Explorer (only!) to http://java.com/en/download/installed.jsp & make sure that the test shows that Java Version 7 Update 7 [for Internet Explorer] is installed.

  16 get Adobe Flash Player v11.4.402.278 (or higher) installed NOW! Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46252

  17. While you're at it, make sure that Adobe Reader or Acrobat v10.1.4 is installed (assuming that one is your default PDF reader)-online http://aumha.net/viewtopic.php?f=26&t=46241

  18. in response to this post with a status report.

  Good luck!

  =========================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default if you wish.

  [3] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• I can't create a new user account (Windows 7): the user profile service service has no logon

  I tried to create a new user account, but I get the following error when I try to open a session with him:

  the user profile service service has no logon

  Until I leave than anything more I will add that I activated the hidden administrator account and this is the account I use to create a new standard user account.

  Most of the patches for this issue are due to the fact that delete manually a user account does not remove the registry key that are associated, and you are required to go to the next section of the registry:

  HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\PROFILELIST

  and delete the key associated with the user account to be deleted.

  This fix IS NOT help, because whenever I try to create a new user, Windows doesn't bother creating a registry key to the new user.  The new user account appears in the account management window.  If I right click ondesktop and select Properties, then the settings , select the Advanced tab and click settingsunder USER PROFILES, the new account appears not here no more.

  It is a huge problem.  I have other people who use this laptop and I don't want to use my login information, or the guest account.  I'm not editing the registry just to make a new account.

  Please tell me there is a fix for this that works.  Windows 7 was not free, and this kind of problem is very frustrating for the premium software.

  Thanks - this is the only tip that help me to find the solution to this problem.

  Two files in the folder C:\Users\Default\AppData\Local\Microsoft\Windows Live could not be copied without administrator privileges.  This caused the connection in the attempt fail for all newly created user accounts.  The files are:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  I've added the read permission for all users in these two files and retried the logon.  The opening of session proceeded set up initial user and filled perfectly.  Probably, this problem started when I installed Windows Live Messenger which is the only Windows Live application, I installed.

  Other important in your message board was to check the event log which stressed the two files which could not copy.  Otherwise provided in WARNING messages immediately preceded files event log error message indicates that the profile service could not connect.

• User account Windows 7 and security - my administrator account is now a guest account

  I seem to have a complex problem, regarding Windows 7 Professional, running on a Toshiba laptop.

  I recently changed my C: drive security features to make the files more accessible to my PC desk top of the page. I went through the process to allow the authorization: Windows Explorer, Driver C:, properties, security, group or user names:

  I selected my user account, and then you click on change. I then highlighted my name of user account and when permissions for authenticated users box below and clicked under the column allow "full control". The system when by a long time to change the permissions.

  Today, I tried to access the files on my laptop on my desk, all seemed very well! I was able to copy files back from both sides through my network. However, today, I noticed that my user account has become a guest account, while he was an administrator account. My administrator account is no longer visible.

  I tried the various patches available online in safe mode. Nothing helps.

  When I start my laptop in safe mode, I see only my administrator account and not my user account. When I start my laptop computer in normal mode, I see that my user account and not my administrator account. My account user has full administrative rights before that.

  How can I get my a new administrator account user account?

  Please clarify these aspects:

  1 you are referring to an administrator account.  There really the administrator username?  If so, this is the built-in Administrator account.

  2. Why do you say that your account is a guest account?  If you go into Control Panel, [view by - small icons, if necessary], user accounts is your normal account appear as a Standard user account?  That at least seems logical, the account guest is something very specific.

  - - - - - - - - - - - -

  If my assumptions were correct then

  A reboot in safe mode and use of the built-in Administrator account to create a new Admin-level account.  Password protect and write the password somewhere down or create a password reset disk.

  B connect to the new account Admin to test is everything is OK.

  C use where the other account to edit your account usual back to being an Admin-level account.  Then sign in to ensure that it works correctly. Restart normally [not in safe mode].

  D disable the built-in Administrator account if it appears in the Control Panel, [view by - small icons, if necessary], user accounts, Manage another account.  I don't think it will be.

  E if you want to check out so you can now reboot into safe mode, and the built-in administrator will be gone from here too.  It appears automatically in safe mode if no other Admin account exists in the system.

  - - - - - - - - - - - -

  On the procedure that started it all off, the permissions change.  Windows does not expect this large-scale change and I invite you to reinstall Windows, since you do not know in what condition the system is now in - Windows probably does not know either.

• Cannot create new or modify existing user accounts Windows 7 Ultimate

  I login as administrator, or in my own account (Administrator).

  Control Panel, user accounts, manage another account... try creating a new account, give it a name, select Standard or Administator... system proceeds to "Choose an account you would like to change" and goes no further.  Does not create a new account; It is there with an empty box as if he's waiting for me to make a choice.  The system is not inadmissible or hanging, and works fine otherwise.  I tried to experiment with different levels of UAC, but that makes no difference.  Manage another account takes me directly on the same screen, with the same behavior.

  Any suggestions?  THX...

  I have the same problem with my windows 7 ultimate, and I was wondering if you have found a way to fix without reloading windows?

  You will get much more attention with a position of your choice instead of add your question to a stale thread that is now two years old.