XP home sp3 startup problems - still starts in safe mode

Similar Questions

• Problems to start in safe mode.

  I have the infamous ainslot.a virus, and I read that I should start in safe mode and use an analysis online to get rid of him. Problem is when I start in safe mode, my screen says its under 60hrz and does not display anything. suggestions?

  Hello

  You should check with the manufacturer of your system (manufacturer of motherboard for customized systems) to this topic
  message mode without failure.

  If you need to save data to a drive non-Boot you can put the drive in another computer
  or in an external USB enclosure - either allows you to copy the data to a removable media. NOTE
  There are two dangers that these 1. The system in which you put the drive could be infected
  and 2. malicious software could be transferred to the new facility. Another method would be to use
  the copy and/or backup methods integrated into these removable media such as CD, DVD, copy or
  other USB keys.

  So it would be best to do the above to remove malware and who could possibly allow the
  computer to start so it can be repaired.

  Configuration/settings (BIOS/CMOS) often F2 as you start to look at the screen - the boot
  for CD/DVD first and start with these to run audits of malware and the removals. Be
  Be sure to set the order started back when finished.

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  System Rescue CD
  http://SysRescCd.org/Main_Page

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===============================================================================

  If you can start mode without failure or Windows.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  I hope this helps.

• Computer still starts in safe mode

  Original title: pls help!

  I have a macbookair running windows7, after that a s clicked improper shutdown 'start in safe mode' by mistake. Now, it runs very slow (about 10 seconds for mouse to move from one side of the screen to the other). When I restart properly, or stop and start again, it is constantly upward in safe mode... any ideas how to solve this problem?

  Hello

  Welcome to the Microsoft community!

  The computer starts in safe mode, and work slowly.

  Computer would boot in safe mode if the safe mode startup option is enabled in the system configuration utility.

  Uncheck the boot option:

  Method 1:

  To disable:

  a. Click Start, type msconfig.exe and press enter

  b. now click on the Startup tab and uncheck the option of safe mode.

  To work with the computer is slow:

  Method 2: Run the troubleshooter of performance

   

  See the site:

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-in/Windows7/open-the-performance-Troubleshooter

  Method 3: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the mentioned site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• d5200t (NE504AV-ABA): computer d5200t fails to ask if I want to start in safe mode but still starts in safe mode

  My computer HP (NE504AV-ABA) d5200t has problems starting.
  
  Whenever I try to restart it from a stop, it does not ask to restart
  Windows in safe mode, and it always starts in a variety of safe mode that blocks
  Use the Ethernet port or any other network devices.  This safe mode also blocks
  using the service Windows Installer 64 bit, so I can't install any program I
  wait for help with this.
  How can I do return to start Windows in normal mode, without losing the
  various files that I have accumulated over the years?
  This is my last computer 64-bit Windows Vista SP2 and has a program that I need
  that will not run on newer versions of Windows.  No installation package for
  This program is available.
  All my last 100 backups or while it is stored on a server HP disc that will be
  is no longer boot, so these backups are EXTREMELY difficult to achieve.

  This site does not allow copy / paste, so I had to insert the text file I had prepared as if it was the code.

  It didn't work - the safe mode was not checked.  What finally fixed MOST of this problem said the startup procedure to use the last known good configuration.  Then, it took about four Windows restarts and correct the time system, to complete the fix.

  During the problem computer is often not quite in safe mode, only confused as to whether she was in safe mode or not.  'Safe Mode' did not appear in the corners of the screen, but try installing the software gave error messages saying that the installation could not be done in mode safe.  Internet connections were usually blocked.  Switching to the alternative shell is cmd.exe, the only way to tell the computer what to do, and if there is a way back to the GUI, it was well hidden.

• Vista Premium still starts in safe mode

  Last week my sons friends close their pc. Since then, the pc starts only in safe mode. I have tried the restore system I.E. usual stuff, disturbances of cd and so on. Is it possible that a setting has been changed? If this is not the case, is there anything else we can try?

  Thank you very much

  Keith

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Above link has info to enter SM

  Table of contents > Vista

  Alterations of ther reading I've included for you out of SM

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () typemsconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     UNCHECK the box labeled Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

     Click the restart button to restart your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• Firefox crashes at startup upwards, cannot start in safe mode

  Help!

  Firefox worked properly until recently. Now, it will not open at all. Crash Reporter says:

  AdapterDeviceID: 0 x 6741
  AdapterVendorID: 0 x 1002
  Modules: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:40.0
  BuildID: 20150807085045
  CrashTime: 1439487913
  EMCheckCompatibility: true
  E-mail:
  FramePoisonBase: 7ffffffff0dea000
  FramePoisonSize: 4096
  InstallTime: 1439455671
  Notes: AdapterVendorID: 0 x 1002, AdapterDeviceID: 0 x 6741
  ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
  ProductName: Firefox
  ReleaseChannel: press release
  SecondsSinceLastCrash: 306
  StartupTime: 1439487911
  TelemetryEnvironment: {"build":{"applicationId":"{ec8030f7-c20a-464f-9b0e-13a3a9e97384}","applicationName":"Firefox","architecture":"x86-64","buildId":"20150807085045","version":"40.0","vendor":"Mozilla","platformVersion":"40.0","xpcomAbi":"x86_64-gcc3","hotfixVersion":null,"architecturesInBinary":"i386-x86_64"},"partner":{"distributionId":null,"distributionVersion":null,"partnerId":null,"distributor":null,"distributorChannel":null,"partnerNames":[]},"system":{"memoryMB":6144,"cpu":{"count":4,"vendor":null,"family":null,"model":null,"stepping":null,"extensions":["hasMMX","hasSSE","hasSSE2","hasSSE3","hasSSSE3","hasSSE4_1","hasSSE4_2"]} ,"os":{"name":"Darwin","version":"14.4.0","locale":"en-GB"},"hdd":{"profile":{"model":null,"revision":null},"binary":{"model":null,"revision":null},"system":{"model":null,"revision":null}},"gfx":{"D2DEnabled":null,"DWriteEnabled":null,"adapters":[{"description":null,"vendorID":"0x1002","deviceID":"0x6741","subsysID":null,"RAM":null,"driver":null,"driverVersion":null,"driverDate":null,"GPUActive":true}]}},"settings":{"blocklistEnabled":true,"isDefaultBrowser":true,"e10sEnabled":false,"telemetryEnabled":false,"locale":"en-US","update":{"channel":"release" « activé » {{{: real, "automatic download": true}, "userPrefs": {}}, "profile": {}}
  Theme: classic/1.0
  Ramjet: 1
  Seller: Mozilla
  Version: 40.0
  useragent_locale: en-US

  This report also contains technical information about the State of the application when it crashed.

  Can help you?

  Hi, based on a large number of recent reports by other mac os x users, I will just guess, this could be caused by the report of trusteer. If you are a user of this program, please see if there is an update available for her or even keep order/uninstalled for now.

  https://Trusteer.secure.force.com/PKB/articles/en_US/FAQ/browser-wont-start/p

• Help with the startup problem. Start load page never stops

  This morning, I found a window on my PC (vista home prem SP 3) who said he had a problem with my departure upward. And that characteristic fixed departure could not fix it. I tried to restart my PC and he had charge green/starrt infinite loading bar. I tried to start in safe mode, but can apparently do not have start that is. I grabbed my system recovery DVD, tried to have either boot with the DVD or are looking for a repair-start feature. But when I try to start from the DVD he wants to restore then only of factorry. Did I miss something there at - it something I can do? I don't want to do a restore with since I have given, I don't want to lose and he's going to take me with all my software and udates about 1 week at least for good install and configure my PC.

  Hi Henry,.

  ·         What is the exact error you see on the screen?

  ·         You did changes to the computer before the show?

  Check to see if the following is useful.

   

  Method 1: Remove non-essential external devices and reboot the computer.

  Method 2: Repair of the boot from WinRE (Windows Recovery Environment) mode. Follow the article mentioned below, to do.

  Startup Repair: frequently asked questions

  See also:

  What to do if Windows does not start correctly

• Firefox crashes immediately on startup. Won't start in safe mode.

  If this is not for my personal system, but a colleague. Our company force installation of some software updates, and he had a forced installation arrives for a Firefox version 38 ESR. The installation completes successfully, and he was not able to run Firefox since then. We have tried to uninstall/reinstall to level 39 (including by deleting the directory under Program Files (x 86). We also tried to restart after each step, do not restart after each step, update of Firefox did not help either, and "Reset" is not available. We can open in safe mode and disable the Add-ons, but then it crashes again once we restarted in normal mode. This morning we tried to install level 38 instead of 39, but get the same results. Help?

  You can check if Firefox can be started in Safe Mode by holding down the shift/Options button.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Satelite A660 freezes at startup every time, but start in safe mode.

  The other day I was using my laptop normally when it froze. Nothing would work, so I stopped and have not been able to market normally since. It will start in safe mode but not in safe mode with network. If I try to boot normally it freezes right at the same time at the start of each time.

  I tried:
  -Select "repair your computer" when starting the
  -Restoration of the BIOS to the default settings
  -Disable start programs in safe mode
  -Restore the system to a previous date
  -Back to the last successful startup

  None of them work. It just freezes.

  I can't use the good conditions, not too computer savvy... I even tried to return the computer to factory settings, as recommended on the site of Toshiba, but when you press 0 a screen pops up that doesn't seem to have anything to do with the system restore?

  I am at a loss. Any help would be appreciated.

  Hello

  Everything you tried is right. It is not easy to say why you have this problem of gel, but I think that in this situation best solution is the installation of clean operating system (factory settings).
  In s user guides document explains how to do this. I put t know why don't you use 0 to start.
  Start with F8 laptop and use the option to fix my computer.

  How it works you can also read on follow Toshiba document-http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  Please test and comment pos.

• XP SP3 update causes computer to only start in safe mode

  My daughter had XP IE8 running on his computer, site update Windows XP SP3 download.  I downloaded and installed, however it won't start in safe mode. When I remove SP3, the computer loads normally.  I then uninstalled IE8 (went back to IE6), made sure I had the pre-requistes, followed the steps as outline on the microsoft site, downloaded SP3 again and installed.  It will only re-start in safe mode.  I tried everything, no matter what I do, XP SP3 causes the computer to restart in safe mode only. I'm totally frustrated. Can someone help me?

  What is the origin of XP SP3 only start in SafeMode anfter installation? What can I do to fix this?

  Continuous restarts or can only to Safe Mode boot after installing WinXP SP3?

  See: http://msinfluentials.com/blogs/jesper/archive/2008/05/08/does-your-amd-based-computer-boot-after-installing-xp-sp3.aspx

  [NB: the above has been updated several times and now includes "a small tool that allows to detect the problem IntelPPM and mitigate before installing (WinXP SP3)".]

  Possible workaround: boot safe mode and rename INTELPMM. SYS to INTELPMM. OLD.

  Other references include:

  • Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"
    http://support.Microsoft.com/kb/953356
  • HP and Compaq Desktop PC: restart the computer after the display of the Stop error 0x0000007E after installing WinXP SP3]
    http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01457284

• computer automatically starts in safe mode without prompting, a problem with your computer might be preventing Windows from start normally__

  computer automatically starts in safe mode without prompting, a problem with your computer can prevent Windows to start normally

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• my vista operating system continues to run in a loop, saying: Configuring updates 3/3 0 full. Cannot start in safe mode or the other amounts to the same configuration problem

  System downloaded 2 of 3 updates. the third will not update and continues in a loop. Failed to start in SafeMode either. Don't know what to do.

  Hello

  as you cannot start in safe mode, try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Slate Plus 7 displays the menu at startup and start in safe mode

  Hello

  I just bought a Tablet HP Slate 7 more. When I got to the top of the Tablet for the first time, he showed a small green menu at the top left that contains the following options:

  Start normally

  Fastboot Protocol

  Core recovery

  Forced collection

  However, I'm unable to go with the volume buttons.

  After the Tablet starts in safe mode, and I noticed that the volume keys up and down do not work.

  Is there something I can do?

  Complete model number: Slate 7 more 4200eg

  It shouldn't do.

  Take a read of this document from HP. I have recommended to perform a factory reset.

  If the factory reset does not help, then it is definitely time to Contact HP or the dealer where you bought your 7 Slate.

• My computer only starts only Safe Mode

  Yesterday, I had no problem with a normal startup of windows vista Home premium, but late in the evening, it was not react to anything that either, so I turned off my computer by pressing the power button. This morning I wanted to start again, but after the windows loading screen, I got a black screen for a minute or 2, then it is restarted again. the only way I can go into my computer is in safe mode, which works very well. I can't remember where I left my installation CD, because this computer is quite old already (for one computer) what to do?

  Hello

  Here are three methods that you can try to solve your problem

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode (which you are already in)

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If these methods do not fix the problem, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  You can borrow a Microsoft DVD from a friend, if you do not or can not find yours.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Help please the windows does not start in safe mode

  I have windows 7 and I got a simple error that I need to fix but I need to get into safe mode. I'm doing the tapping of f8, but it just goes to the login page. Ive tried several times and just can't get it

  Hello

  There are 2 methods to get into Safe Mode.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Windows7

  Use the msconfig method:

  Using the method of System Configuration tool:

  Note: If you have problems to enter Safe Mode using the F8 method, don't use this method to force so that it starts in mode without failure. For reasons that why you should read this.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig as shown in Figure 12 below.
     
     Figure 12. Windows 7 search box

     Then press enter on your keyboard.

  4. The System Configuration utility will open and you will see a screen similar to the one below.

     Click the Startup tab.

  5. You will now be the home screen as shown below.

     Put a checkmark in the checkbox Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     Click the restart button to restart your computer.

  8. Your computer will now restart directly in Mode without failure. When you get to the Windows 7 logon screen, log on to the computer and perform all the necessary tasks.
  9. When done with your tasks, starting in Safe Mode, start msconfig.
  10. When the program is opened and you are on the general tab, select the Normal startupoption.
  11. Press the apply button, then the OK button.

  See you soon.