XP Internet vidio run start stop smoothly the Rafale in short reading.

Similar Questions

• Start/stop of the VM ESX 4.1

  Hello

  I am looking for some clarification on this feature.  Currently have 4 machines I need to be started immediately after the start of the host machine.  I put the start delay to 10 seconds for all 4 machines.  Is what it means all 4 machines starts 10 seconds after the host starts the first GOLD machine starts at 10 seconds, 2nd machine starts 10 seconds after the start of the first machine, 3rd machine starts 10 seconds after 2nd machine starts, etc. ? I wish that all the machines beginning immediately after the start of the host. Could someone please help with this precision?  Thank you very much.

  Hello

  check out the menu to start/stop the virtual machine in the ESXi host Setup tab - you can define a start of the next VM triggers. It is possible to let 'Start VMware tools'. I do not recommend from multiple virtual machines at the same time if your storage space can not handle this well, a host by one can be in some circumstances booted up faster when occurs a bootstorm.

• Cannot read the response header - short read

  I have a MacBook Pro with Mac OS X 10.6.8.  I also have a HP Photosmart C4700 printer.  Yesterday, I started to get the message that precedes, when I tried to print.

  Went on this forum and we tried all the following features based on what has been proposed.

  In system preferences, I deleted and added the printer again.  Disconnect all cables from the printer, it turns off, then reconnected.

  I also downloaded all my Mac, more went into disk utility, updates repair the drive, rebooted, then reseset the system of printer options which meant reinstall the printer.

  No go.  Still get the same message when printing, as well as documents are saved in the stack of the printer, the printer paused.  Sigh.

  Any further suggestions?

  I would skip the first part. From the second section of the steps numbered by resetting the printing system. I hope that will get it repaired for you.

  Let me know the results and we can go from there.

  Good luck

  Kyle

• x 230 sometimes does not start - stops at the screen Intel Boot Agent

  Hi all

  We use x 230 with Win7 ultimate and domainintegration in our business environment. Some devices have problems at startup. Sometimes they stop booting on the Intel Boot Agent screen. When you restart the computer, it is impossible to enter the BIOS Setup too. You are able to press F1 and later, you can type the BIOS password (if you use one) but then it stops again at the same point, as shown above and shows no BIOS.

  Then, several reboots later (more than 5 I would say) it suddenly works fine again for a few rounds of start and stop. And you suddenly have the same problem again without having changed anything seriously.

  BIOS version is updated to the last that I could find on the pages of lenovo. (2.51 Rev.01)

  It is impossible to give a device with such a mistake to beat in the hands of users.

  You have any ideas?

  Thank you

  Martin

  
  

• Start/stop of the Virutal Machine - settings of the ESX host

  Hello

  With the help of a powershell script I would change the parameters 'Virutal Machine putting into power' on multiple ESX hosts at the same time.

  I need to change the following:

  1. Check or turn on 'allow the virtual computers start and stop automatically with the system '.

  2. And change the stop Action to suspend.

  You how know?

  Tim

  And if you want to do it for all of your ESX servers, you could do

  Get-VMHost | Get-VMHostStartPolicy | Set-VMHostStartPolicy -Enabled:$true --StopAction Suspend
  

• Photoshop is not running, start stops at Blue "busy FastCore routines archiving" loading screen (osx el capitan)

  Hello!

  I went through the troubleshooting suggested, find the plugin that is causing the problem and remove from the application folder.

  It does not work. Photoshop then hit the next extension (multi processor support) and the next and so on...

  The problems appeared after the release of a new facility.

  System: 2015 macbook pro 15 "retina running OS X 10.11.3 el capitan.

  Kind regards

  Could you please uninstall the Application once, and then uninstall it please remove preferences as well.

  Then please reinstall the Application.

• System freezes requiring a power coercive start/stop. The error concerns JMB38X.

  There are 4 events in the case where the Viewer every time the system crashes.  View all source as PllugPlayManager.  How can I fix?

  1: the device 'JMB38X SD/MMC Host Controller"(PCI\VEN_197B & DEV_2382 & SUBSYS_30FB103C & REV_00\4 & 995034 & 0 & 0028 2A) disappeared from the system without first be prepared for removal.

  JMB38X SD/MMC Host Controller

  PCI\VEN_197B & DEV_2382 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0028

  00000000

  2: the device 'JMB38X SD Host Controller"(PCI\VEN_197B & DEV_2381 & SUBSYS_30FB103C & REV_00\4 & 995034 & 0 & 0028 2A) disappeared from the system without first be prepared for removal.

  JMB38X SD Host Controller

  PCI\VEN_197B & DEV_2381 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0228

  00000000

  3: the device 'JMB38X MS Host Controller"(PCI\VEN_197B & DEV_2383 & SUBSYS_30FB103C & REV_00\4 & 995034 & 0 & 0028 2A) disappeared from the system without first be prepared for removal.

  JMB38X MS Host Controller

  PCI\VEN_197B & DEV_2383 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0328

  00000000

  4: the device 'JMB38X xD Host Controller' (PCI\VEN_197B & DEV_2384 & SUBSYS_30FB103C & REV_00\4 & 2A 995034 & 0 & 0028) disappeared from the system without first be prepared for removal.

  JMB38X xD Host Controller

  PCI\VEN_197B & DEV_2384 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0428

  00000000

  There are 4 events in the case where the Viewer every time the system crashes.  View all source as PllugPlayManager.  How can I fix?

  1: the device 'JMB38X SD/MMC Host Controller"(PCI\VEN_197B & DEV_2382 & SUBSYS_30FB103C & REV_00\4 & 995034 & 0 & 0028 2A) disappeared from the system without first be prepared for removal.

  JMB38X SD/MMC Host Controller

  PCI\VEN_197B & DEV_2382 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0028

  00000000

  2: the device 'JMB38X SD Host Controller"(PCI\VEN_197B & DEV_2381 & SUBSYS_30FB103C & REV_00\4 & 995034 & 0 & 0028 2A) disappeared from the system without first be prepared for removal.

  JMB38X SD Host Controller

  PCI\VEN_197B & DEV_2381 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0228

  00000000

  3: the device 'JMB38X MS Host Controller"(PCI\VEN_197B & DEV_2383 & SUBSYS_30FB103C & REV_00\4 & 995034 & 0 & 0028 2A) disappeared from the system without first be prepared for removal.

  JMB38X MS Host Controller

  PCI\VEN_197B & DEV_2383 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0328

  00000000

  4: the device 'JMB38X xD Host Controller' (PCI\VEN_197B & DEV_2384 & SUBSYS_30FB103C & REV_00\4 & 2A 995034 & 0 & 0028) disappeared from the system without first be prepared for removal.

  JMB38X xD Host Controller

  PCI\VEN_197B & DEV_2384 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0428

  00000000

  Update your motherboard chipset drivers, drivers for network devices, video device drivers and audo drivers as well as drivers for any hardware that you have connected the machine to web sites for the individual manufacturer support.  Do * not * use any integrated methodology or request for update of the third-party driver to do this.  Manually locate and download the appropriate drivers and install them.

  Maye you want to even check in a BIOS update to card mother yout.

  Otherwise - maye you have defective hardware / dying.

• How to fix error: internet security refusing to open a program on cd, cd does not have to have internet to run, it's graphical files just can't read

  I have a cd of graphics that I bought. It worked fine for a few years now, whenever I try to load a file from the cd, my computer tells me that's not valid cd.  Cannot open all of the files on the cd.  Then yesterday, on a whim, I tried again once all the files appeared on the cd and it started to load.  About halfway through, my computer froze and the cd stopped respoding. You need to restart the computer now to return to the unable to read the cd.  I get an error message says internet security does not allow it to access the files.  It's just the files. EPS are stick people, none of which has nothing to do with the internet.  Any suggestions?

  Hello

  Thanks for posting in the Microsoft Community Forums.

  We're here to help and guide you in the right direction.

  Help me with little information.

  1 is this problem specific to this graphic CD?
  2 are you able to use another CD/DVD on the computer?
  3. What is the number of brand and model of the computer?

  4. did you try to use the same CD on another computer and check?

  Method 1

  If you have any security software installed on your computer, disable them temporarily and check if you are able to download the file and check if it helps.
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2

  Make sure that the following settings are correct in internet options.
  a. close all Internet Explorer Windows that are currently open.
  b. open Internet Explorer by clicking Start, and then click Internet Explorer.
  c. click on tools and then click Internet Options.
  d. click on the Security tab, click Internet and then click on the custom level button.
  e. scroll down to the downloads category and download the Enable value.
  f. click OK and then click Yes.

  Change Internet Explorer security settings
  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-Explorer-security-settings

  Let us know the status of the issue. If you need help, I'll be more than happy to help you.

• How to find the history of the instance starts/stops?

  Hello
  I'm looking for history of instance starts/stops.
  
  Thanks in advance.

  Hello

  You can find the history of start/stop of the instance in the alert log file.

  Follow the steps below.

  1 SQL > show settings back.

  / u02/oracle/admin/test_db/bdump string background_dump_dest

  It is the location of the my bdump folder.

  2. got to the location.

  3. alert ls *.

  alert_test_db.log

  Kind regards
  Ranjan

• App background stops when the screen turns off

  I wrote an Android app with a Service that receives events from the LocationService and the accelerometer and always try now to wear 10 BlackBerry. Tests on a Z10 STL100-2 10.1.0.4181

  Once the unit has remained unchanged for some time, the location listener is not registered, in order to save energy, and re-recorded a trip again.

  Don't worry, this can be disabled via the visible activity. But it must continue with the last State (start/stop) after the reboot.

  I even magically figured out how to add additional permissions for the manifest of BAR: "_sys_android_autostart_service" and "run_when_backgrounded".

  But as soon as the screen turns off, my application stops working. No location or accelerometer case being received. Turn on the display again, everything back to normal.

  It is meant to be a question about the accelerometer, but I could not find in the tracker.

  So my questions are:

  -Is it possible to port Android continue to receive events location when the screen is off?

  -Is it possible to port Android continue to receive events of accelerometer when the screen is off?

  -Will my service to continue to operate if more than 8 Apps began after mine? (And the user did not hit the close button)

  -The "headless" 10.2 mode help? (I currently only test with 10.1, because my service provider has not yet unlocked 10.2)

  -Finally, this would be possible with a native application? (I could port the port iOS... lots of fun...)

  Thank you very much for your help!

  PS: If it's of any interest: I use the plugin V1.6.1 Eclipse/ADT to package and install the bar.

  As reported here as well (and I'm sure in other places)

  http://supportforums.BlackBerry.com/T5/Android-runtime-development/accelerometer-turns-off-when-Scre...

  I'm working on a deal in the next version, similar to what we're doing with location requests (in other words, activate us the background mode if your app acquires a partial wake lock).

  Edit:

  So my questions are:

  -Is it possible to port Android continue to receive events location when the screen is off?

  (Yes, but you must hold a wake lock).

  -Is it possible to port Android continue to receive events of accelerometer when the screen is off?

  (For the moment, no, but I'll change that, so it behaves like location.)  Mind you, this could be used to work on old revisions of the software until the native sensors team added a background of sensor mode which is disabled by default and must be explicitly enabled).

  -Will my service to continue to operate if more than 8 Apps began after mine? (And the user did not hit the close button)

  (There are a lot of thing that matters if your Services happens to run or not, which is not limited to, but includes the number of applications already running and the status of the device memory).

  -The "headless" 10.2 mode help? (I currently only test with 10.1, because my service provider has not yet unlocked 10.2)

  (No, it's a native thing.  Your application is already technically without head)

• ESXi 5.1 build 2000251 - unexpected host to start/stop

  A few days after the connection, the start/stop of the unexpected host.

  / var/log/vmksummary says:

  Header 1

  2014 T 02 08-21: 00:01Z heartbeat: place 15d12h44m53s, 2 mV; [[9140 worker spend 47480 KB] [10145 vmx 4194304kB] [10154 vmx 4194304kB]] [[10079 Oba - vmware_raw 8% max] [9952 sfcb-vmware_bas 14% max] [9940 Oba - pycim 20% max]] 2014 08-21 T 08: 32:28Z bootstop: host started 2014 08-21 T 08: 32:28Z bootstop: Core dump found 2014 08-21 T 09: 00:01Z heartbeat: place 0d0h28m33s, 0 mV. [[vpxa 9411-worker 12656kB] [9948 Oba-pycim 15316 kB] [9140 worker spend 44636kB]] [[10087 Oba - vmw

  /var/log/vpxa.log says:

  Header 1

  2014 08-20 T 22: 33:59.627Z [52195 B 90 verbose 'vpxavpxaInvtVm'] [VpxaInvtVm_ScheduleVmSpaceRefresh] next refresh will start in 110.333336 min 2014 08-21 T 00: 24:19.628Z [verbose 'vpxavpxaInvtVm' 522AFB90] [VpxaInvtVm_ScheduleVmSpaceRefresh] refreshing 0 VMs 2014 08-21 T 00: 24:19.628Z [verbose 'vpxavpxaInvtVm' 522AFB90] [VpxaInvtVm_ScheduleVmSpaceRefresh] next refresh will start in 127.099998 min Section for VMware ESX, pid = 9411, version = version 5.1.0 = 2000251, = exit option 2014 08-21 T 08: 32:25.245Z [FFE0E6D0 info "Default"] logging uses the fast track: false 2014 08-21 T 08: 32:25.245Z [FFE0E6D0 info "Default"] handling bora/lib logs with VmaCore facilities 2014 08-21 T 08: 32:25.245Z [FFE0E6D0 info "Default"] Manager Initialized to the handle 2014 08-21 T 08: 32:25.245Z [FFE0E6D0 "Default" error] unable to set current working directory: / var/log/vmware/vpx, N7Vmacore15SystemExceptionE (no such file or directory) 2014 08-21 T 08: 32:25.246Z [FFE0E6D0 info 'Default'] current working directory: /etc/init.d 2014 08-21 T 08: 32:25.246Z [FFE0E6D0 "ThreadPool" verbose] news feed: Min Io, Max Io, task of Min, Max Task, Max Thread, Keepalive, exit seconds idle, idle, SDS max: 2, 9, 2, 4, 13, 4, false, 600, -1 2014 08-21 T 08: 32:25.248Z [FFE0E6D0 info "Default"] log path: / var/log/vmware/vpx 2014 08-21 T 08: 32:25.248Z [FFE0E6D0 info "Default"] SSL initialization 2014 08-21 T 08: 32:25.251Z [FFE0E6D0 info "Default"] Vmacore::InitSSL: handshakeTimeoutUs = 20000000 2014 08-21 T 08: 32:25.252Z [FFE0E6D0 'VpxMutex' verbose] mutex profiling: InvtLock 2014 08-21 T 08: 32:25.254Z ['SysCommandPosix' FFE0E6D0 info] ForkExec(/usr/bin/vmware) 9415 2014 08-21 T 08: 32:25.258Z ['vpxavpxaLegacyHost' FFE0E6D0 info] [VpxaLegacyHost::LoadVMwareVersion] "vmware - v" returned: -> VMware ESXi 5.1.0 build-2000251

  I need to be able to find the problem. Any help?

  SSH (Putty) into the host.

  Go to/var/core. You will find the dump files named vmkernel - zdump.x.

  The first part of this file is readable, more party to the end step.

  Look for the the CMTF stack dump it.

  For example, search for BlueScreen.

  Post here the trace.

  Or if you have a screenshot of the purple screen. It's the same thing.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• My icons on my desktop are missing and in the start menu, my files are missing (ie itunes) as "internet explore runs without any add ons.

  Last night my computer says something about a hard drive failure

  Hi Jazmin123,

  1. you remember to make changes to the computer, after which the issue started?

  2 are all the desktop icons and lack of start menu?

  3. what version of Internet Explorer is installed on the computer?

  4. do you see iTunes under installed programs? You are able to open iTunes in the program files directory navigation?

  Try the following steps:

  Step 1:

  Due to Internet Explorer, take a look at the link to the following article:

  Internet Explorer 8 will start in "no Add-ons" mode when you use the desktop icon to start Internet Explorer

  Internet Explorer Add-ons: frequently asked questions (Applicable to Windows XP)

  Step 2:

  If all the desktop icons are missing then try the steps from the following article link and check if that helps:

  Your desktop icons are missing in Windows XP

  I hope this helps. Can't wait to hear back on your part.

• Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed.

  Generic host win32 problem...

  HI, I have soundcards XP SP2, version 2002. Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed. After all that, my internet stops working and against hepatitis a to erboot to make it work again. Help, please

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• I get a window pop up this saying that internet Explorer has suddenly stop working. then it says microsoft is looking for answers. then he said: the program needs to close?

  I get a pop that says "internet exployer has suddenly stop working, and that microsoft is looking for a solution", and then he come back with another pop up saying "the program I've been in must stop"?

  First, run a full scan with the AV (anti-virus) program you have.
  Make sure that the computer is not infected.

  Then some tutorials for you to try:

  1 Internet Explorer does not start or stop responding
  http://support.Microsoft.com/kb/926449
  Note: It has an auto FixIt application. Use it.

  2. Internet Explorer Add - ons problem when IE hangs or freezes
  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us
  Note: there also an Fix It self.

  3. to resolve network connectivity problems in Internet Explorer
  http://support.Microsoft.com/kb/936211