XP Mode in Windows 7 does not detect the ATI Radeon graphics card

Similar Questions

• Windows xp64 does not detect the printer hp laserjet p1102

  Hello

  Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

  Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

  Hello

  I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Windows Update does not detect the sp1.

  Hi all.

  I do update windows via the control panel and its been so many updates, but it does not detect any service packs.
  Anyone know what I can do to solve the problem?

  My computer is a compaq presario with vista home premium.

  Thank you.

  Hello

  Download SP1 or SP2 from the links below:

  Vista SP1:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  Vista SP2:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  And then perform a clean boot and disable the antivirus, and then restart the computer.
  Clean boot:
  http://support.Microsoft.com/kb/929135

  Install the service pack, and then restart the computer.

  Problem of Windows updates should get fixed after you install the service packs.

  All the best!

• PC Windows XP does not detect my 1 GB SD card when I put it in the slot, but the light

  My PC is running Windows XP Service Pack 3.

  I have several slots for various types of cards and due to have been to a wedding, I need to get the pictures on my camera, I popped the SD card which is a 1 GB Sony Memory Stick PRO Duo in the slot for this card, the light and my mouse flashes everything but nothing happens.

  Can someone please? I can't find the USB cable for the camera

  Thank you very much

  Hello

  (1) have you made changes before the start of this issue?

  (2) using the card reader?

  Method 1: Why does my computer detect my new USB device when I am running Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Method 2: Windows XP does not recognize a secure digital card when you reinsert it after you remove it

  http://support.Microsoft.com/kb/812661

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  Method 3: Install the latest drivers from the manufacturer's Web site.

  Also occurs with any other SD card another it is recognized or detected or you can even check if the same SD card becomes recognized or detected on the other computer.

  See also: http://social.technet.microsoft.com/Forums/eu/itproxpsp/thread/103ce9a2-2b5c-4a04-9b9a-eef9ff78dbd3

  Let us know if t his help.

• HP Pavilion 17-e049wm Device Manager does not see the amd radeon 8650g card.

  Windows 7 can not find the graphics card for the amd radeon 8650g.  I tried to install the drivers from AMD and they never appear in the Device Manager.  It only gives me "Standard VGA Graphics Adapter."  Windows Update will not update.  They say that it is current because it cannot find the radeon 8650g.  AMD Setup never shows the driver file during installation.  It installs all sorts of other things, but never the driver.  As if it does not find material.

  What is going on.

  Hello:

  Your laptop is not supported by HP for Windows 7.  There is no graphic drivers for W7 for it to HP.

  My only suggestion is to try the graphics drivers from the Lenovo G505s

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS035764

• Windows Vista does not detect the printer

  had the printer works fine until Windows vista did an update. Now hp poster printer not detected

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• BlackBerry Smartphones Media Manager does not detect the 16 GB Media Card

  I just bought a microSD 16 GB for my Blackberry "BOLD" and the phone itself is concerned, it works very well. I am able to navigate the map using my phone and he wrote that a multimedia card is present.

  The problem I have is with the Desktop Manager of "Media Manager". I want to be able to transfer/encode music and videos on my new media card, but it does not appear in the list. I tried upgrading to the latest version (4.7) and still nothing. The only thing that appears in the "My devices" list is the built-in 1 GB memory of the device.

  I called Rogers for technical support, but they do not support the Media Manager.

  Any help would be greatly appreciated.

  Thank you!

  Brendan

  Please read the link

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB11883&sliceId=1&docTy...

• Windows 7 does not detect the GPS Garmin device.

  Original title: the hardware detection.

  I recently bought a Garmin GPS.  I can not get my PC running windows 7 to detect it.  Fortunately, I still have my old machine with XP and it recognizes.  How can I get my new machine to detect.  I down loaded new drivers from Garmin website, but nothing helped.  My old machine ran to 64-bit the more recent short 128 bit if it's any help

  My Magellan 5236 T wouldn't connect to Win 7 Premium. Began to look for someone with XP. Duhh!
  And that's this worked on my Compaq Mini Win 7 Starter Edition (in french!).
  Go figure. There are 32 bit vs 64.  It may be useful

• Windows 7 does not detect the additional disks in the selection of drive during the instalation

  OK, I have a Dell Inspiron 17r 7720, it has 2 drives 750 GB and a 32 GB ssd

  the installation of 7 single 750 GB is available, the other 2 drives are no where to be seen

  all are detected in the bios

  any information would be greatly appreciated

  Thank you

  Hello

  Please keep us updated on the status of the issue.

  However, tried to run the Hardware Diagnostic Utility for the hard drive such as suggested by Ashish Sondhi responded on 22 November 2014.

  If so, please answer with the results, in order to help you solve the problem.

  Thank you

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• Windows 7 does not detect multiple external hard drives

  I recently bought a HP Pavilion laptop to 7 Home Premium. I have two 500 GB external hard drives. When I connect them individually to the system, they are recognized and I can copy files to and from these External Drives. But when I try to connect both at the same time, Windows 7 does not detect the drive I connect then. Any help is greatly appreciated.

  If the disks are powered by the USB bus and do not have their own external power supply the problem is that the laptop does not provide sufficient USB power to control both.

  The USB specification, is that each port should provide 500mA at 5V. To keep their batteries, laptops usually provide 500mA to share between all available ports. If you need to use several USB devices with significant power, you must either externally powered USB hub or to provide the devices with their own power supply to cutting.

• Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

  I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

  Any help would be appreciated!

  Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

  http://www.pendrivelinux.com

  If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

  MS - MVP - Elephant Boy computers - don't panic!

• BIOS Inspiron 2305 does not detect the drive in ahci mode

  The hard drive in my Inspiron one 2305 crushed and I tried to install a 500 GB Seagate Barracuda drive.

  The Bios does not detect the drive. I noticed that the SATA in the BIOS mode option has been put on AHCI. I changed the ATA mode and the BIOS has detected the drive.

  However when I try to install a clean version of Windows 7 (Dell OEM disc), to halfway to the installation Setup will fail. I noticed that the reason why it will fail, is that the installation process now does not see the hard drive.

  Can someone tell me what steps to take to do the installation?

  theFlash1932 and natacuk4

  Although I was not able to swap the Sata cables as natacuk4 suggested; It looks like just unplug and reinstallation of cables Sata what it did the trick!

  I was able to boot the system several times and it seems that everything works fine.

  Thank you guys for helping me solve this problem!

• Windows 7 does not detect not USB flash drive

  Hi, any help much appreciated on this. Windows 7 does not detect USB flash drives on my laptop. I know that readers of work on other computers and all the USB ports. He does not play sound when plugged in the first time and does not anywhere on my computer. Any ideas? Thanks in advance

  Assuming that you have several disks that work on other computers...

  If you have tried several USB drives on the same port

  AND

  This port does not recognize the USB device plugged in, while the port is not operational.

  IF

  All ports respond in the same way

  THEN

  You don't have either not installed the correct drivers

  OR they did not physically.