XP Mode/VPC does not start on Windows 7 Ultimate upgraded from Vista Ultimate box

Similar Questions

• Satellite C55 - Has - 1 L 0 does not start in Windows 8

  Hey guys.
  I hope you can help me a bit.
  I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

  I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

  I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
  I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

  So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
  Is my HARD drive broken? Can I try something else?

  Thank you very much!

  You are right. This issue should be fixed by the authorized service provider.
  Furthermore, why do some risk steps to check this problem, if the warranty is valid.
  Warranty will cover the repair costs.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck.

• Satellite A200 - support Button does not start when windows starts

  Hey,.

  Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
  However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

  However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
  I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

  Edit: I found a solution, even if not the best. If anyone still has the same problem:
  I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

  Hello!

  I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

  Search on the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...

• Webcam does not work with windows 7 ultimate.

  Sony laptop vaio: VGN-CR353 winvista Home premium... I've upgraded to windows 7 Ultimate edition.

  Webcam does not work with windows 7 ultimate. Send me drivers & software

  Hello Nipa.  The model seems to be a model for the Asia-Pacific.  Drivers for this model are available from this link:

  http://www.Sony-Asia.com/product/VGN-cr353

  Simply click on the 'Support' tab in the middle of the page.

• Satellite A300-259 does not start on windows

  Hello

  I have a laptop Toshiba A300-259 and I have problems trying to get into windows.
  When I try to start my laptop, it would remain on the screen of the Microsoft logo with no response. I tried to use the HDD recovery procedure (link below) but if the screen jumps just to load Microsoft. I tried also security mode, but when it finishes loading all the drivers it just freezes.

  Is that what I can do before purchasing a toshiba recovery media disk?

  HARD drive recovery procedure

  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  Hi mate

  Well, if you didn t create a recovery disk previously, you must purchase a new recovery disk.

  If the Windows operating system starts not using safe mode or normal mode and if the HDD recovery procedure does not start then I n t see other options for you to try the recovery disk.

• C50-A0113 satellite does not start in windows

  Hello.

  I have a toshiba satellite laptop C50-A0113 8 64-bit windows running.

  Ive had exactly two years a few days ago I restarted and then when it starts up, it stops at the screen "Toshiba leading innovation" and then he said: scanning and repair drive C, while on this screen it starts the process and then stops at 34%.

  It was two days ago now it just gets stuck on the "screen toshiba innovation leader" and then after a few minutes, it says preparation auto repair.

  Then he leaves the screen and goes to a screen black for a few minutes then flashes the blue screen written "your computer has encountered a problem" then restarts.

  I tried to create a bootable windows disc 8 in order to repair, but it does not start even in the usb port.
  I restart and press f12 to select the media to begin. It checks the media goes to the toshiba screen, then everything goes black for a few minutes until what it restarts.

  Can I please know what is the problem and how can I possibly fix it because the problem is clearly not my hard drive.

  I have removed and put into another laptop and it was fine

  Hello

  If you want to start Notepad using external media (such as a CD or USB flash memory key) you must disable the secure in the BIOS boot option.

  If you want to install Win 7, you must also pass the CSM mode UEFI Boot Mode.

  For me it of not quite clear if you created the recovery media (flash memory stick or disk)

  If you created one in the past, you could use this recovery media to put the laptop back to factory settings.

  In the case where this is not possible, some of the material (perhaps HDD) could be affected.

• Computer does not start after Windows update

  I built my computer in December last year, which makes it less than a year. It has worked fine until this last week when I decided to give a few necessary windows updates a lot. I decided to download and install all night, and now it does not start. I get nothing on the screen. I don't get the safe mode options. I didn't get last known good configuration options. I don't not even a splash screen. After a full minute, it turns off again, regardless of how many times I turn it back on. It happened for a few days. Are no external hard drives not connected; only an intern. The only devices I plugged are my keyboard and mouse. Can anyone offer a solution? Whatever happened to you?

  I am running Windows 7 Ultimate Edition.

  The first time I tried to start after downloading the updates, he went to the boot screen windows 7 usual, that clear blue that says it configures windows and not turn off the computer during the process. Before we were told: "Welcome to Windows," he said "Shutting Down", but not before the configuration of progress has reached 100%. At this time, everything seemed normal. After the computer turns.

  Hello

  To fix your problem, you can follow the steps on this link. You can perform troubleshooting listed on this site by clicking here. The listed on these links troubleshooting steps are applicable to Windows 7 and more.

  Let us know how it goes.

  Best regards

• After the deployment of a Windows 7 image, pc does not start after Windows logo

  Hello

  I tried to install a laptop via a Windows Image. After that I deployed the image, the laptop does not start past the Windows logo. Normally I had to change the SATA AHCI setting to solve this problem, but he was already on AHCI.

  I tried to install it via a Windows 7 installation CD and it works, but I want to fix the laptop / image to work on this laptop.

  The logo of Windows get stuck, then I get a blue screen very quickly and it restarts. Also when I try to start in safe mode, it's the same thing. loading everything, then it gets stuck and also a really fast blue screen and reboot.

  Someone at - it an idea may be what the problem?

  BR,

  Jim

  I did restore by image much, many times without ever a problem.

  • I only use the integrated Windows 7 image creating installation
  • I only use a DVD + R White, never-r
  • I create the image ONLY on install brand new to be absolutely certain, there is no corruption

  I've heard of this kind of problem does not happen when the image was made from a damaged disc.  Which simply transfers the corruption.

• Laptop does not start upward, Windows error recovery

  Hello, my laptop has blocked start correctly.

  It all started when I was using the laptop as usual and the battery disconnected, I didn't notice right away until I removed the charger and the phone is dead, because then the laptop does not start with the dough connected and the charger,

  I use Windows 7 when I boot up I got to Windows error recovery that takes me so into the Startup Repair which is nothing, I tried system restore but it won't let me past picking of a restore point.

  I have I have the laptop currently in safe mode hoping that would allow me to restore the system, but it has not, please someone can he help because it is a work laptop and I need to use it this weekend

  Thank you, Josh

  Hello

  Thank you for visiting Microsoft Community.

  According to the description of the problem you are facing problems with your Windows 7 computer. The question might be if there is a file system corruption. Then I suggest you to perform auto repair. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1:

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  Try to rebuild the BCD by using the Bootrec.exe tool.

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.

  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  3. Click repair your computer.

  4. Click the operating system you want to repair, and then click Next.

  5. In the System Recovery Options dialog box, click command prompt.

  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope this information helps.

  Meet us with the State of the question.

  Sincerely,

  Ankit Rajput

• Windows 8 Pro does not start after windows update updates for April

  Hello

  Pulled up to my PC this morning and was asked to install updates from windows update. Check the list, there are 11 important available updates. I have unchecked and hiding implementing Nvidia updated as I want to do the updates of my GPU myself. Installed the remaining 10, completed and has been asked to restart my PC.

  The problems starts here; I am more able to start windows.

  It is past the bios screen, shows the blue flag with a circle of rotation below and then... nothing more than a black screen and my screen goes to mode 'sleep'.

  I tried to start in safe mode minimum clean using a prompt (bcdedit/set {default} safeboot) repair my installation disk option, but it does not start even in safe mode.

  I run system restore turned on so that the option is not valid for me.

  The system is now check the disk for errors, but it seems to hang there as well as happens for more than 2 hours now...

  Any way that I can return the updates of windows on the outside? Any other suggestions than the reset of the installation disc?

  Spec: Evga x 58 classified 3, Intel Core i7 950, 2 x Geforce GTX 580 in SLI, 12 GB Corsair Dominator GT DDR3, Corsair Force 3 SSD 128 gb, Dell u2711 2560 x 1440. Win Pro 8 x 64, completely up to date with the latest drivers. PC worked perfectly up to this Point.

  Disappointed that the "major updates" Microsoft kills my work machine.

  Problem solved now and it was the update of KB2808735 who was / is the origin of the problem.

  I placed my SSD into another computer and was able to pull up in SafeMode off and remove the updates.

  Installed all the updates one by one until it chrashed again installing the update mentioned above.

• Pavilion dm4-1265dx does not start after Windows 7 logo

  My laptop does not start after the "Starting Windows" screen when I try to boot the operating system normally. When I try to run the repair mode from the start nothing happens... I get a blue background image and the pointer of the arrow, but no icons or windows appear.

  I tried the system diagnostic mode by pressing ESC when turning the laptop on and the hard drive test fails every time, showing the following results:

  Test Drive: 1
  INTELLIGENT control: passed
  DST short: failure

  Failure ID: 64RG79-5AP62V-XD6U2K-60RN03
  Product ID: XZ298UA #ABA

  Hard drive 1

  --------------------------------------------------------

  Test drive: FAILURE

  How should I proceed? The laptop is still under warranty, but it was purchased in the United States, and I now live in the Brazil.

  Hello

  You will need to replace the hard drive.

  HP should send you a new drive for free, but in your case is a little complicated as you mentioned it already. Please contact HP tell them about this situation. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

• Windows Defender service does not start on Windows 7

  On my laptop, Windows Defender is no longer in effect. Reads the message: the service does not start. When I manually try to start the Defender, the massage is: file not found!
  I can't remove Defender another upodate no longer works.

  Someone knows a solution?

  Hello

  Go to configuration-system board and security - administrative tools - services. Find the windows defender and double-click it. Then choose, auto start option, click on apply. turn it back on.

  In addition, you can read about trouble of Windows defender:

  http://support.Microsoft.com/kb/931849

• HP-P7-1026 b: Desktop does not start on Windows 10.

  Desktop computer does not start after reboot. Windows 10 message PREPARING AUTO REPAIR leads to next screen CHOOSE YOUR KEYBOARD LAYOUT and freezes / disables keyboard and mouse.

  Virus ISVProgramme can do so many things, do not rely on them. Also, why buy a new hard drive! Yours is still perfectly fine. I guess staples suggested, to avoid dupes. If you want a new hard drive. Your recovery disk should work as well as your old hard drive like new.
  Do not open e-mails that you are suspicious. One click and they own a computer.
  Good luck.

• t460p does not start after windows birthday 10 update of 1607

  Hi, please help

  I had a birthday windows 10 update of 1607

  It inexplicable the pc, and the screen went black for more than half an hour.

  Now, my t460p will not start any longer, he stops on the red square of lenovo, sensor power print, button and finger are lightning,

  I don't come to a bios, pressing ENTER while booting does nothing.

  How can I boot my laptop?

  Thanks for the help!

  In response to the reports of the Lenovo ThinkPad systems client does not start with a screen as expected after the upgrade for the update of Windows 10 anniversary, Lenovo has provided a workaround solution.

  A TRICK of Service has been made available here: https://support.lenovo.com/us/en/solutions/SF16-T0077

  Thank you