XP pro do not start after changing the Boot.ini file

Similar Questions

• My copy registered and checked for XP Pro SP3 does not start after changing the motherboard. Second problem is that I can't find my original install of XP Pro disc.

  After failing to find the source of reliable performance from my PC, I decided to bite the bullet and replace the motherboard, memory and the CPU. I installed a triple base 435 Athlon and a motherboard Gigabyte MA74GMT. Awarded PC again started the first time - but Windows will not, I get a number of options but none work - safe mode brings up several lines of messages on the partition of multi (0) disk (0) rdisk (0).

  A previous post suggested that a similar message meant some kind of malware but if I replace the old motherboard, processor and memory Windows works very well - in fact I use it now.

  Do I have an option but to reinstall Windows from a CD? Otherwise I have a problem - I can't find the installation discs for each piece of software except my Windows XP Pro! I do repair discs?

  Thanks for your help.

  Hi DaGeLi,

  · Provide us with the complete message you receive.

  Follow the methods below:

  Method 1:

  You were able to start the first time, you can try to boot to the last known good configuration and check the results. Link to get the procedure please refer to: how to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  Method 2:

  If it doesn't then you can follow the procedure from the below mentioned link. As you do not have the Windows XP CD you can follow the procedure if you have already installed on the computer to recovery console

  How do I recover from a corrupted registry that prevents Windows XP startup:http://support.microsoft.com/kb/307545

  Otherwise, you may need to make the boot floppies. See the link for the procedure below:

  http://support.Microsoft.com/kb/310994

  You can also contact the manufacturer of the system to get the Windows XP CD.

  For reference: how to fix a computer that does not start:http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite Pro L40 does not start after changing the BIOS settings

  Changed some settings in the bios last night and now when I boot I get a screen black lights flash and hard drive lights up but nothing on the screen.

  There is no password on the bios... How would a BIOS reset to normal?

  I put a windows disc now, I hear the disc spin but nothing on the screen

  (I think that I have come to the right place on the forum)

  It s a Toshiba Satellite Pro L40 model psl4be.

  Thank you

  > There was no bios password... How would a BIOS reset to normal?

  You can set the default BIOS ONLY inside the BIOS access BIOS by pressing F2 or at the beginning of the initialization of the order

  But I doubt that this problem is related to the BIOS.
  Maybe it s just a simple bad luck that this problem happened exactly after change something in the BIOS.

  Try connecting an external monitor and check if you can see something on the 2nd screen.

• OptiPlex 755 USFF does not start after changing the cmos battery

  I have a desktop Optiplex 755 USFF requiring the cmos battery to replace. After the replacement of the computer will not start. It brings up the menu windows start, the sasfe mode, safe mode with network set mode command prompt, security, last know good configuration and boot normally. Any option will bring to the top of the WIndows XP loading screen and then re-boot of the computer right back to the start screen. A big loop. I can get the hard drive to boot in an Optiplex GX280 without problem. I was told of the motherboard needs to be replaced, but I changed the units of the system and the same thing with this hard drive.

  I tried to reinstall the operating system and get all the way to "starting windows" and then the blue screen stop error message 0x0000007B (0xF7A10524, 0xC0000034, 0x00000000, 0x00000000) dead. The computer is WIndows XP SP3, 1 GB of ram with 80 GB hard drive. It seems that the Setup program does not recognize the hard drive.

  Any help would be appreciated.

  After several hours of experimentation, I finally found the correct BIOS settings in order to get the computer to boot. There are three BIOS settings that need to be changed or check settings by default so that it can work. SATA 0 must be activated, SATA operations must be changed from AHCI, ATA and in the modular Bay, by default "far-sighted" should be replaced by the IDE. Save the settings and start the computer to the right upwards.

• Windows does not start after changing the partition with external software

  Hello

  I messed up and followed some bad advice.  Water under the bridge, but I want to recover my bootcamp partition if possible.  I've seen several messages with the right process, but decided to post hear instead of assumptions.  I am running OS X El Capitan on an early 2011 MacBook Pro.  My 256 GB SSD is a bit pressed and tried to be too stingy with the Boot Camp partition, so my current troubles after resizing.  I have 10 Windows on the bootcamp partition.

  I'm going to throw a bunch of data from my survey here.

  Capella: ~ list of the ronh$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 250,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 190,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 58.7 GB disk0s5

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 190,2 disk1

  Logical volume on disk0s2

  B6DC811B-004D-4245-83C9-8FAA0B51FD9E

  Unencrypted

  Capella: ~ list of cs ronh$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 487E3580-D1BE-4A6D-A33C-38C8DD8ABA34

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 190546800640 B (190.5 GB)

  Free space: 19005440 B (19.0 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 190546800640 B (190.5 GB)

  |

  + -> 37BE876E-8E51-47C3-8D62-001EC021DE56 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +-> Logical Volume B6DC811B-004D-4245-83C9-8FAA0B51FD9E

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 190175473664 B (190.2 GB)

  Reversible: Yes (no required decryption)

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  Capella: ~ ronh$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 250059350016; SectorSize = 512; blocks = 488397168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 488397167

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 372161720 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  372571360 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  373840896 1024

  373841920 114554880 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  335 488396800

  488397135 32 table dry GPT

  488397167 1 dry GPT header

  of gdisk.

  Command (? for help): p

  Disk/dev/rdisk0: 488397168 sectors, GiB 232.9

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: FD5932B4-069B-4CCE-A2EE-99AB5720CA17

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 488397134

  The partitions will be aligned with the boundaries of sector 8

  Total free space is 1365 sectors (682,5 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 372571359 177.5 giB AF05 Macintosh HD

  3 372571360 373840895 619.9 MiB AB00 Recovery HD

  5 373841920 488396799 54.6 giB 0700 BOOTCAMP

  

  It is worth spending time to recover?  Thank you.

  Ron

  1. can you describe the problem and the steps you took to get here?

  2 can scroll you down to the next MS data (after that highlighted) and press 'p' to the list of files? Press ESC, once only, to return to this list.

• HELP... z400 will not start after changing the BIOS settings

  Hello

  I went into the BIOS and changed all the PCI slots to include 'calculate' so now it does not recognize video card, now it does not start far from enter the BIOS to undo changes. Ive pulled the battery, reset the CMOS button and jumped the pins CMOS won't default. To b e there is a way to fix it... Please any ideas will be appreciated.

  Hi Glenn,.

  Thanks for posting your query in Microsoft Community.

  Important: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I recommend you contact the manufacturer of the PC for the procedure for making changes in the BIOS.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• WINDOWS 8 PRO DOES NOT START AFTER UPGRADING THE BIOS

  ACER Aspire 4730z

  I just updated my BIOS version. And after the easy upgrade restarted my laptop. And boom. My Win8 is not start now... help me :((

  Hello

  You will need to maybe get into your bios and restore the order of boot device... You would think that would be already fixed properly, but sometimes it isn't.

• VCenter Service does not start after changing the port number

  Hi all

  Accidentally, I changed the port number for the Vcenter server from the portal of VCenter 10443 and dint realize that the Java application uses 10443 so.

  Could not start the server vcenter service, because its raise an error saying 10443 port is already im currently byt used another application.

  I tried to stop the Java service, in order to start the vcenter service and make changes to port again, numbers but I am unable to stop the java application.

  Please, if anyone knows how to change the number of Vcenter via config port or any other way, please throw a comment... Its much appreciated.

  Thank you

  Nirmal

  If you use the MSSQL database, locate WebService.Ports.http in the VPX_PARAMETER table and change to the correct port.

• Windows could not start after activating the boot.

  Hi all

  I have a very serious problem.

  A few lost technology from Microsoft asked that I have to do the following:

  http://support.Microsoft.com/kb/929135.

  Immediately after the restart, I was confronted with the following message:

  Windows could not start.

  Status: 0xc000000e

  Info: A required device is not connected or is not accessible.

  Startup Repair does not work. -Root cause found: the partition table has not a Sys component validates.

  System Restore does not work - the system cannot find the specified file (0 x 80070002)

  Bootrec - rebuildbcd works no item was not found.

  Bootcfg does not work - could not open the TRUNK. INI file.

  Bcdedit does not work - the requested system device cannot be found.

  GParted does not work - cannot load the ntfs module: invalid argument.

  How can it be fixed, please?

  It is an extremely urgent situation which must be resolved immediately, because I use this computer for work and need to return to work on a large commercial project Monday. Forget the original question that MS tech was trying to 'help' with, everything what I need now is to be able to get into Windows, or even just make this record available and accessible on the LAN computer.

  Hi all, thank you for the advice.

  Problem has been resolved after a cold start.

• Database does not start after losing the current log file.

  Hello
  
  I'm working on oracle 10.2.0 by mistake I lost my current log file. and I have no backup of it. my database is stopped. my database is in nonarchivelog mode.
  
  I use the command sequence to overcome
  

  SQL> shutdown immediate
  ORA-01109: database not open
  
  
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup mount
  ORACLE instance started.
  
  Total System Global Area  536870912 bytes
  Fixed Size                  1250044 bytes
  Variable Size             297798916 bytes
  Database Buffers          230686720 bytes
  Redo Buffers                7135232 bytes
  Database mounted.
  SQL> DROP LOGFILE 2;
  DROP LOGFILE 2
       *
  ERROR at line 1:
  ORA-00950: invalid DROP option
  
  
  SQL> alter databasE drop logfile member 'D:\oracle\product\10.2.0\oradata\NEO\REDO02.LOG';
  alter databasE drop logfile member 'D:\oracle\product\10.2.0\oradata\NEO\REDO02.LOG'
  *
  ERROR at line 1:
  ORA-00361: cannot remove last log member
  D:\oracle\product\10.2.0\oradata\NEO\REDO02.LOG for group 2

  any suggestions
  
  Thank you
  Umesh
  
  Published by: Umesh Sharma on November 27, 2008 05:30

  With DB in MOUNT State try as follows:

  SQL > recover database until cancel

  type to cancel immediately, if necessary, then

  SQL > alter database open resetlogs;

• How to edit the boot.ini file in windows 7?

  I currently have windows xp 7 and added o/s. How can I change the boot.ini file?

  Type MSCONFIG in the start menu to run the System Configuration utility.

  On the Boot tab, set your options, and the operating system you want to run.  Changes will be automatically written to the boot files.
  Click OK to save your changes.

• My Windows XP pro would not let me change the option 'Use the home screen', so I removed a vital .dll file. I can't start Windows now!

  My Windows XP pro would not let me change the "Use welcome screen" option under: user accounts/change the way users connect or power off.

  He gave a message to the effect (I forgot to write it!) "a recently installed program does not change this setting. Search in the file named "RtlGina2.dll for a clue. So as silly as I can be, I did a search, finds the file RtlGina2.dll in the Windows/System32 folder and cut and paste on my desk. My thought was to isolate this file to see if it will address the problem of not being able to change the option use Windows screen.

  Now, I can't run Windows! It gives a message that this file RtlGina2.dll is not found! Specifically, it says, User Interface failure. The UI for logon RtlGina2.dll DLL failed to load. Contact your system administrator to replace the DLL or restore the original dll.

  How can I replace the dll if I can't even get started? Help, please! I know just enough to get me in trouble I see.

  WyoPathfinder,
  Are you able to boot mode safe mode with command prompt?  If Yes, then you can search for the file "dir /s /a RtlGina2.dll" lists the location where you moved to.  Then you can just copy (path\filename) c:\Windows/System32\(filename)

  If you do not work in safe mode, then you can boot from a XP disc and go into the recovery console and do the same thing.

  Hope that helps. QQ learn manage!

• Win 7-64 not start after change of motherboard. Win 7-64 has tried to repair without success. Message is

  Win 7-64 not start after change of motherboard.   Win 7-64 has tried to repair without success Message of Win7 installed "Cannot automatically repair the start" Message from the repair option DVD Win7-64 install is "this version of the Recovery Options is not compatible with this version of Windows".

  If Win 7-64 don't update the hardware changes and this prevents the start.

  Is there a solution for this problem of resettlement and thus destroy all previous program files and configurations?

  Hello

  As you mentioned that you have "hard disk 500 GB (previously there were two HD in the old mobo)" which means the HD is also changed

  Then I suggest to clean install to solve this problem, please follow the link to clean, install the windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  Note: data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Thank you

  Er.Mayank Chadha

  Thanks for your response

  I solved this problem in BIOS Advanced\SATA config\SB SATA config.  as follows

  SATA port 1-4 = AHCI initially

  SATA port 1-4 = new IDE

  SATA port 5-6 = IDE these ports used with DVD, a comic book should be like ports 1-4

  This because I've done a typical mistake of mine.   I did not save the configuration with the entry of FDI

  Good bye

  Huemul

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• Not possible to change the boot order in the BIOS on Satellite satellite A10-403D

  I want to be able to boot from CD or USB STICK at first upward, but in the BIOS, it is not possible to change the boot sequence...

  Thank you for helping me! :)

  Hello Susan

  It will be interesting to know what model of laptop you have. By the description of the problem, it is always useful to know the exact model of laptop.

  When you turn off your laptop, press F12 and let us know exactly what is happening. By the way: can you explain what happen when you try to change the boot order in the BIOS settings?