XP PRO SP3 Gone Away print spooler

Similar Questions

• Problems printing L7590 (Vista 64-bit); works perfectly on XP Pro SP3

  Hi all

  New L7590 on Vista 64 bit on HP Pavilion A6720F has problems.  When I print a page to test simple (or something else), she prints about half the page and prints then completed three pages, each with one or two lines of strange characters at the top (small faces, @ signs, hearts, call you).  Meanwhile, the computer makes that sound that you hear when you connect a new USB device about 4 to 7 times.  It also provides that the sound when you copy just a document, but it works.

  I have attached the printer from the box of my XP Pro SP3 and it printed as a champion of CorelDraw and Adobe Acrobat Pro, in addition to a good one to test page printing.  None of these USB connection sounds were heard.

  ideas?

  The problem is not with the printer!  It is with the Pavilion/Vista 64 operating system.  HP Pavilion support solves the problem.  HP OfficeJet does not know how to solve the problem.  Here is the address that they realized that me and once the drivers have loaded issue resolved.  http://www.NVIDIA.com/Object/nforce_vista64_15.24.html good luck.

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html

• OfficeJet Pro L7780 - have to restart each job print spooler I print (Windows 7 32-bit)

  I have an OfficeJet Pro L7780 which displays offline in devices and printers constantly.  I discovered if I queue print jobs to it and then restart the print spooler all jobs will come out perfectly, then the printer will instantly be in offline mode.   Here's what I've already done for troubleshooting:

  Upgrade to the new firmware (R2011NxNxeN0)

  To factory reset # and 3-boo

  Changed ink and Printhead

  Most recent pilot 14.0 (tried Basic and IT Pro Driver)

  Rebooted and restarted computer and printer

  Tried this on a 2nd computer to Windows 7 with the same results

  Someone at - it actually use this printer under Windows 7 32 bit on the wired network port! ? !

  I was just checking if you guys have tried the update I've linked below.

  Windows 7 update critical to improve the reliability of the network connection

• Update of Acrobat Pro XI crashed the program and the print spooler

  I have a brand new 10 windows computer and had installed Acrobat Pro XI which worked great until the latest update has been released. My computer tried to auto install the update and the update failed. Immediately when it failed, it crashed my spooler to print and all my printers disappeared; I was unable to reconnect to them without having to restart the computer.

  The Acrobat site suggested that if the update was unsuccessful and failed, I should uninstall Acrobat Pro and reinstall it. Well, I tried that and the problem cascaded gets worse. Acrobat does not provide ANY technical assistance with this kind of thing except through public forums.

  When I tried to uninstall Acrobat Pro, as the site of Acrobat has suggested, I ran into the problem with the print spooler again; He could not reset and start. For example, Acrobat Pro can / can not be uninstalled. I tried to 'fix' the installation without success. And when I tried to reinstall the program, it could not properly reinstall because I had to install the 'Adobe Application Manager' that does not install with the following message: "Installer failed to initialize. " Please download Adobe Support Advisor to detect the problem"and has provided a link. Of course, when you click on the link, you get another message, "that The Adobe Support Advisor has been abandoned" direct me to the forums that provide absolutely NO support for that either.

  At this point, I lost my * expensive * Adobe Acrobat Pro XI product, with no way to reinstall and no help to fix this Adobe created. In addition, I now have another serious problem with the print spooler.

  If * person * helpful suggestions, please send them my way. I'm ready to throw Acrobat altogether and never use one of their products that has been such a mess to deal with.

  Hi rickj90358804,

  If you try to install Acrobat XI via Adobe Application Manager, I suggest to download an installer manually using this link: download Pro or Standard versions of Acrobat DC, XI or X and try to install again.

  In addition, you can contact the support as kglad mentioned above.

  Kind regards

  Tariq Dar.

• print spooler is not running: xp sp3 x 86

  I uninstalled HP printer to install a new HP printer: print spooler does not work anymore, and the new printer is not installed.
  FixIt says print spooler does not start: it can fix it.

  Several files are missing:
  Ntprint.dll
  Spoolsv.exe

  Files are present:
  Winspool.drv
  printui.dll

  I ran sfc/scannow
  SFC scanned my files/CD - no report, I go back to the cmd prompt. Spooler still does not run, missing files not replaced.

  I found a lot of suggestions, none of which are the same, each with some replies saying it works & others say that the solution does not work.

  Can I copy & paste the missing files from my XP CD?
  Can someone suggest a better approach?

  Thanks in advance,
  Cathie

  Try to use the search function and specify "Search system folders" and "search for the hidden files and folders".

  Research of dllcache

  You should also try to search for your missing files.  KB234729 gave you the spoolsv.exe back?

  Files ending with a underscore should be expanded from a command prompt window by using the Expand command.  Open a command prompt window (start > run > cmd > OK) and type expand /? for the list of parameters.

  Basically, the command would be:

  expand C:\i386\spoolsv.ex_ C:\windows\system32\spoolsv.exe

• HP OfficeJet Pro 8610: Print spooler list 0 documents pending after you have sent the print job - isolated

  Last week I updated the HP OfficeJet Pro 8600 to a new 8610 of OfficeJet Pro to my office. The printer is connected to the wired network with a static IP address and 5 of 7 the office computers can print to it without any problems.

  The other two computers cannot print documents from any product of MS Office, but they can print the following file types:

  .jpg
  .PNG
  .gif
  . TIF
  txt.
  .PDF

  The printer will also print page content Web of Internet Explorer 11, but not Firefox 34.0.5. It allows to print Excel spreadsheet, but only from Apache OpenOffice spreadsheets. OpenOffice will print all Word documents. It will not print any format MS WordPad.

  Two computers, problems are running Windows 7 Pro 64 bit.

  I have already uninstalled and reinstalled the software several times. I also uninstalled all HP files and records using Revo Uninstaller, where a former registry value was the process.

  I tried the convenience of installation HP, HP Print and Scan doctor, HP Support Solutions Framework. I tried to manually re-install all the drivers, I tried every convenience store printing Microsoft, disable firewall and everything else I could think of.

  Under the heading "Ports" on 'Printer properties' I installed it as "HP network monitor of rediscovery" and the types of WSD port with the same result. If I try to configure the port, I get error 0x0000007b.

  Hello @tshimkus!

  Thanks for posting on the HP Forums!

  I understand that your Microsoft Word documents do not print your 8610 Officejet from two of your computers again. I was able to find a post on the HP Forums regarding the same problem you are having.   Please follow this link for Officejet Pro 8610 do not print documents from MS Word.  In the post are step by step instructions provided by @X-23 that the crimped to provide a solution for other customers face the same problem.

  I hope that this provides a resolution for you also!

  Let me know how it goes!

• Problem with stop print spooling in my Windows 7 Pro, when you use a printer HP Officejet Pro 8600 Premium.

  I dealt with this problem for weeks.  I rule the troubleshooting, and it tells me there is a problem and it is fixed.  However, I does not.  It will start printing again, but then the print spooler stops again.   Other malfunctions indicates it only a problem, but the information about the problem, will not send Microsoft.

  What happened when you tried?

• OfficeJet Pro 8600 USB, Dell OptiPlex 9010, Windows 7 Pro, 64-bit. Printer hangs sporadically.

  Printer and the computer are less than six months. All the drivers for the printer and the computer have been updated at the latest. BSOD occasionally when printing HP JO, but not in network Xerox printer/copier. Some recent error messages:

  Event ID: 808

  The print spooler could not load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI. DLL, error 0xc1 code. See the user context information for event data.

  The print spooler could not load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\PS5UI. DLL, error 0xc1 code. See the user context information for event data.

  Event ID 372:

  The Microsoft Word document - xxxxxx.docx, held by CJones, failed to print on printer HP Officejet Pro 8600. Try printing the document again, or restart the print spooler.

  Data type: NT EMF 1,008. Spool file size in bytes: 307056. Number of bytes printed: 307056. Total number of pages in the document: 6. number of pages printed: 0. Client computer: \\ASEAPC19. Error code Win32 returned by the print processor: 2147500037. Unspecified error

  I ran doctor Scan and printing and printer install wizard for Windows - "everything out ok with your product." "The current full HP software is already installed and drivers seem to be installed correctly.

  Appreciate any help you may be able to offer.

  Cathy

  Hello Cathy

  Unplug the printer from the computer and follow the instructions below. Let me know the results.

  1. Go to add/remove programs.
  2. Uninstall Officejet Pro 8600. If you see the other programs related to the 8600 Officejet HP remove them as well.
  3. Make sure you have the latest version of Adobe Flash installed.
  4. Restart the computer.
  5. Go to devices and printers, select any printer, then click Properties of (top-right) print spooler, click the drivers and make sure that the driver for the 8600 is gone.
  6. Download the latest driver for your printer and reinstall.

  Sources:

  HP C5180 printer will not print using spooler after upgrade to Windows 7 (64-bit)

  Error code Win32 returned by the print processor: 2147500037. Error__ not specified

• Print spooler is not running

  Original title: Print Spooler
  Am now be said that the print spooler is not running. My drive XP Pro SP2 cannot check the files. Currently the SP3

  Thanks for asking! As I understand it, the print spooler does not work. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2. What is the exact error message?
  3. What is the brand and model of the printer?
  4, when you receive this error message?

  Method 1:
  Run the fix it and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/

  Method 2:
  You can try the steps in the link and check if it helps:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Please follow the recommended steps and post if you still experience the problem. I'd be happy to help you further.

• Issues of print spooler for Windows XP Professional

  Hello.  I am having some problems with the print on my Windows XP Pro machine spooler.  The print spooler service stops.  I went into the service and restart the print spooler and a few seconds later it stopped again.  I currently have a print job in the queue, but when I try to delete the spooler stops as well, taking away my ability to delete the job.  In addition, he keeps giving me the error message pertaining to the print spooler stop.  Does anyone know of any fix for this problem?

  Thank you.

  At a command prompt, delete the print queue.

  1. to open a command prompt type CMD in the box run from the start menu and press (or click OK).

  2. at the command prompt, enter the following commands, pressing after each:

  net stop spooler
  del/q %SystemRoot%\system32\spool\printers\*.*
  net start spooler

  Search in the cases where the problem of the spooler stop journal of indexes.  To open the event log type eventvwr.msc in the area run menu start, look in the log system spooler related errors.

  John

• OfficeJet Pro 8500 A909a not print correctly

  OfficeJet Pro 8500 A909a

  Windows 7

  I can't print now with my usual USB connection, directly from the computer USB for printer, even if another computer can print to it via a network connection.  After printing, I open printer in devices and printers, there is a ghost copy to the printer and the printer itself is ghost, indicating that it is in offline mode.  After you open the Quebec, the file is listed with a message "error-printing".  I can remove the copy to the printer and to set the printer online, but the process is repeated each time.

  I: restarted the computer and the printer, run the troubleshooter printer with no problems, noted, tried the USB cable to a different port, execute printing and doctor Scan and my computer 'sees' the firmware, printer and resettled drivers and restart the print spooler.  There is no hardware problems - it will print on the other computer and copies, etc very well.  I have not tried another cable because I have a step and assume if my computer can see the printer should work.  One final note: there was a bolt of lightning about 100 yards away for the weekend. first thing Monday back to work is when I noticed the problem.

  Please help, I did research for hours without success...

  Tried the printer with 2 different usb cables to another computer and it never worked.  I think that the usb port on the printer has been fried.  Bought a new printer works fine.

• HP Officejet Pro 8620 does not print, but the document is sent to the printer without error

  I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
  In the first computer (windows 7) I can print without any problem
  On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
  I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
  Thank you for your advice

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• Had a problem with the print spooler in Windows server 2012 R2 so cannot print

  service has stopped several times to meet the demands of service control: print spooler

  Contact the service provider or system administrator on whether to disable this service until the problem is identified. You may have to restart the computer in safe mode you can turn off the service.

  Event ID - 7046

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• The print spooler stops and I'm unable to start

  I have a HP Officejet Pro L7680 all-in-one that has stopped printing because of the stopped print spooler.  The printer is connected to a local network.  My OS is Windows 7.  I tried Wizard solutions HP that does not help or give answers.  All I get is error 1053 has failed at the beginning or demand for appropriate ion Conytol.  What should I do to start the print spooler?

  To start the spooler go to the start menu and select Control Panel then Tools administration and select Services, and then scroll until you see print spooler. If the spooler is running, then select Restart the service, and then try to print a document.

  Let me know how it goes.