XP Professional restarts spontaneously everytime then stop

Similar Questions

• Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  You should be able to move your cursor to the top of the screen and the menu bar will fall.  So, you start with

  

  Drag the slider to the top of the screen against the edge and hold that and you should see

  

  Click the button of "green".  This should take you out of mode full-screen Mail.

  Command + control + F should do it too.

  Also when you have the cursor at the top of the screen and the menu bar comes down, you could also use Mail-> view-> full screen output

  You should also be able to use the command + Tab to switch to another application

• Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Hello C Johnston,

  Did experience you these issues when streaming video from any other website?
  It is possible that the servers of YouTube we perform slowly at this time here. This is the problem?
  You might try to optimize Internet Explorer to see if it helps at all:
  http://support.Microsoft.com/kb/936213

• Uninstalled Microsoft office XP Professional with Frontpage, since then I get Windows Installer Windows pop up. Y at - it a fix for Windows install stop this.

  Uninstalled Microsoft office XP Professional with Frontpage, since then I get Windows Installer Windows pop up.  Y at - it a fix for Windows install stop this.

  You are in the habit of using "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. ( CCleaner Registry Cleaner) ?

• The Apple Mobile Device Service service on Local computer started and then stopped.

  My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says  "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• Safari 9.0.2. I find safari hangs and does not open pages as it should. Blue progress bar moves to half way then stops. Reload the page do me later, but it is slow. No idea what's causing the problem. WiFi is good.

  Safari. When opening a site, the page frequently does not. The blue progress bar moves about half way and then stops. I can get to move usually by reloading the page, but it's slow and frustrating.

  It does occur on a particular site. Now, it seems to be fairly general.

  WiFi is good so I don't think that's the problem.

  Any ideas?

  Go step by step by step and test.

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2 remove Caches.db

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari > Caches.db

  Right-click on the Caches.db file and select "move to trash".

  Close the windows.

  Restart and restart Safari.

  3 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  4. remove the Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

• Example: HP Probook s 4530: my short 4530 s for a minute and then stops

  My HP 4530 s works for about a minute and stops and will not work for more than a minute and keeps closing. The power cord must be unplugged and reconnected before I can restart the computer. It will run for 1 minute or two then stops. I tried to go to a restore point, but he did not finish before stopping. Someone at - it any help? Thank you

  @bayouparson

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
  
  If you are not familiar with messaging private forum please click here to learn more.
  
  Thank you
  Omar

• I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

  Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

  I'm not being updated hardware or software on my Dell Latitude D8380.

  I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

  I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

  Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

  Please can you help. Thank you, Sue Dixon

  Hello

  Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Let us know the status of the issue.

• Error - windows search on the local computer started and then stopped. Could not start the Windows Search service.

  Original title: windows search service does not start.

  When I try to start the service "windows search" I get the following error "windows search on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the services of newspapers and performance alerts' I tried manually and nothing, can someone help me please.
  It is a XP machine and yes I have windows search 4.0. I need help to get that windows search service has restarted.

  I no longer need it, I just backed up all my files and re - install windows XP.

• After you apply the fixit on windows update error 8000ffff PC starts "prosessing update 3 50%" and then stops again and again

  have had windows update problems for awhile now, 8 months or more

  I did E-mail support instructions for a few weeks with the help of computer technology

  Error 80070057

  Asked to uninstall Kaspersky AV

  same error

  Tech found the personal firewall that still on the pc of the previous installation using msconfig and unintalled using a program uninstaller for ca

  restarted and I have tried to update again and had error 8000ffff

  This led the tech to run microsoft fixit in default mode

  now, loops start mode PC rises to the small circular windows vista logo then says appliing update 3 3 50% sayes welcom and then stops, restarts, and loops on this subject.

  Can I get the pc to boot wihtout install updates?

  Tried safe mode and last good config known

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• M535 Logitech Bluetooth Mouse works for a few minutes then stops working on

  I have a new mouse BT M535 and it works for a few moments then stops working.

  I use Windows 7 Professional Service Pack 1 with my Dell Precision M4800 Intel Core i7-4900MQ CPU @ 2.80 GHz, 16.0 GB of Ram, 64-bit Op

  Does anyone know how to fix this? Simply, it stops working and you must uninstall and then reinstall but does the same thing. We tend to Office I know sometimes things blocks as well. Any comments would be useful.

  Thank you in advance.

  Thanks for the reply. I was able to solve the problem by returning the BT of Logitec mouse and buy a mouse Microsoft 3600 BT. Works fine now.

• Error 711 The Secure Socket Tunneling Protocol Service service on Local computer started and then stopped. ." Unable to connect to the Internet

  Original title: I get error 711 when I try to connect to the internet via a UIM modem on my windows overpriced home 7 SP 1

  Did some research and tried manually from the phone, RACM, RACM auto and plug and play services but got error 1068.Tried to start the service SSTP to solve this problem but got the error "the Service of Protocol Secure Socket Tunneling courier on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. »

  I am so desperate and would appreciate helpful suggestions.

  Hello

  1. When was the last time it worked?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the steps is not enough, go to method 2.

  Method 2:

  Ensure that all dependencies of Service Remote Access Connection Manager components are started and set to automatic

  (a) (a) cliquer click on start-run, type services.msc, the, click OK.

  (b) ensure that the following services are started on and set to automatic.

  (c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change (under the general tab).

  (d) if she once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

  See also:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and keep us posted.

• Service server vmware vcenter orchestrator on local computer started and then stopped

  Hello

  I'm unable to start the Server service of vco on Windows 2008 R2 machine. If I try to restart the service it displays the following error;

  "Service server vmware vcenter orchestrator on local computer started and then stopped. "Some services stop automatically when not in use by other services or programs.

  Can someone give me the solution for this?

  Thank you

  Radhika

  First check the configuration of the vCO application and that all green lights. If this isn't the case difficulty what the problem is.

  If everything is green, see the server.log file and look for FATAL / ERROR.

• Preview only parts 1 sec then stops

  I have the last iMac (Quad core i7) and 8 GB of Ram.  I installed the trial version of the first and when I play any video file it works only 1 second of it and then stop.  It isn't maxing out the CPU.  It has the codec for this file video (I can see it and hear it).  I even tried to put a title on the screen with nothing else and it plays for 1 sec.  I uninstalled and reinstalled.  What can I do else?  Why won't it play?

  Here is the solution.

  1. open Finder and navigate to/YOUR_HD/Library/Preferences

  2 rename or move the file to the Trash: com.apple.audio.AggregateDevices.plist

  3 restart the program

• Firefox runs exactly 15 seconds then stops. Why

  Just installed Firefox today. It runs for 15 seconds then stops. Have not been able to set preferences, visit websites, nothing at all.

  What operating system do you use?