XP Recovery will not accomplish. Error "Failed to create C:\hp\bin\SetRes.log" and then locks

Similar Questions

• Satellite A100 - recovery will not be finished and stop error message occurs

  Satellite A100-S2211TD, OS is Windows XP Home Edition of recovery disk,

  I have updated the BIOS to 2.20 and laptop was working fine. The old installation of Windows factory has worked well.
  After a few weeks, I tried to use the recovery disk to remove the noise from the HARD drive.
  The recovery of disk task completed and the computer restarted.
  I got the stop error message
  STOP: 0x0000007B (0xFA335528, 0xC0000034, 0x00000000, 0x00000000)
  I removed the memory that I have entered over the past two years and return the PC in the factory scene.
  However, recovery will not be finished (he worked to restore).

  I am able to boot in dos with a separate boot disk (Dr. back, windows does not start, not even in the safe control mode) and I did chdsk of the disc and disc is fine.

  I've never used before recovery disc, the only thing different is BIOS 2.20 instead of 1.50.
  WEB of TOSHIBA said that if you upgrade the BIOS most 2.00 you can not return to 1. XX

  Thank you
  g

  Hello

  The A100-S2211TD doesn t support the Intel Chipset!
  This laptop was equipped with the ATI graphics card and the graphics driver on the Toshiba page contains us the graphics driver and chipset driver!

  Have you received 100% good recovery CD?

  In your case I would try to install Win XP from the Microsoft CD to check if the same error would appear if no drivers are included in the CD of the OS.

  Check it out

• My Readyboost does not work. When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.

  ReadyBoost - Cache problem!

  My Readyboost does not work.  When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.  The process cannot access the file because it is being used by another process.  Help!

  Hello

  Did you change your computer?

  (a) click on the 'Start' button, then click on 'computer '.

  (b) right click on the USB drive or flash memory card that uses Windows Ready Boost, then click 'properties '.

  (c) click on the tab "Ready Boost" in the 'Properties' window to the memory card or the USB drive.

  (d) select the title radio button "do not use this device ' then click on 'OK '. This step should remove automatically the Ready Boost cache on the device. If you are unable to use the full capacity of the device, proceed to the next step.

  (e) double-click the memory card or the USB drive.

  (f) right click on the file 'ReadyBoost.sfcache' and then click 'remove '.

  (g) click 'Yes' to remove the ReadyBoost cache.

  Reconnect the device ready boost which allows the service to boost loan which will create the new cache.

  I suggest you to follow the links and check out them.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Turn ReadyBoost on or off for a storage device

  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Using memory in your storage device to speed up your computer

  http://Windows.Microsoft.com/en-us/Windows7/using-memory-in-your-storage-device-to-speed-up-your-computer

• updates will not install error 1

  updates will not install error 1

  Error code 1: "unable to install". Creative Cloud Desktop: https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

• audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes

  audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes

  Hello ShawnKohl,

  We can also try to go back to a time where he worked with system restore.

  Once this has been done, check the hat of Windows updates are available and hide the audio driver updates that are available.

  System Restore:

  Windows XP - http://support.microsoft.com/kb/306084

  Windows Vista/7 - http://windows.microsoft.com/en-US/windows7/products/features/system-restore

  Updates of masking:

  http://support.Microsoft.com/kb/902992

  Please note that in addition to that, the advice of the previous poster remains true: we want to get the latest audio driver on the system of the manufacturer.

  Best regards

  Matthew_Ha

• my windows updates will not install error d 000737

  my windows updates will not install error d 000737

  Please visit: How to reset the Windows Update components? Carey Frisch

• Acrobat-com will not update error 16820

  Acrobat-com will not update error 16820 how fix?

  Hello

  Start your computer in a clean boot, and then try to update Acrobat to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  If the problem persists then, I suggest you to contact Acrobat support about the issue.

  http://www.Adobe.com/support/acrobatdotcom/

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• Windows 7 will not search my rtf files. I went into Control Panel and rich text is selected. I also tried adding again, but he will not always look for rtf files.

  Windows 7 will not search my rtf files. I went into Control Panel and rich text is selected. I also tried adding again, but he will not always look for rtf files.

  Hello

  ·         Is that what the problem is with a specific file extension?

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Follow the steps below to solve the problem:

  Method 1:

  If you have problems of location of the files, folders, or other items on your computer, try using the search and indexing of troubleshooting to solve the problem. It ensures that the Windows Search service is running and checks if you have the correct permissions to search all the directories on your computer.

  See the article below for additional information and steps.

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Method 2:

  Also I ask you to re - index files and then check. Follow the artticle below for the procedure.

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  See also:

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Hope this information helps.

• For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

  For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

  Hello DavePerdue,

  Thank you for your message.  Click HERE for your driver from the HP website.  It seems that it just took some time to get the driver online and available for download.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  How can I fix it? Nothing in help or on the Site.

  Once you have registered the product, you should not see the banner of 'Trial' on NEW projects. This isn't the case, right? You only see on the project that you created before you register the product, right?

  That said, to remove the banner, go to the folder of directory on your hard drive where your project PREL files are stored and delete the folder called Adobe Premiere elements preview files.

• Lightroom will not update to Blurb to create a book; also not download to a pdf file.  How can I fix it?

  Lightroom will not upload to Blurb to create a book; also will not download to create a pdf file.  How can I fix it?

  Could you please create a new Collection and then check with the new collection.

• I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  You can check the Advanced Interaction Panel? You have a note attached to the interactive objects in the simulation? If so, check the desired option Quiz, more specific preferences.

• my project file will not open as it was created on a newer version of Adobe Premiere Pro and cannot be opened with this version. What I download?

  my project file will not open as it was created on a newer version of Adobe Premiere Pro and cannot be opened with this version. What I download?

  You should be able to update your version and get things working again.

• Application deployment error (failed to create schema) planning

  Hello
  
  I tried to deploy a planning application and got blocked at the stage of deployment (validation by fine Wen). During deployment, the work was abandoned giving the following error: failed to create Scehma for application. Out of creating applications.
  
  Can anyone suggest what could be the problem here. Appreciate the help.
  
  
  [Sep 8, 2010 14:06:07]: the analysis of the properties of the Application...
  [Sep 8, 2010 14:06:08]: properties of Configuration of Application...
  [Sep 8, 2010 14:06:08]: analysis of Dimensions info...
  [Sep 8, 2010 14:06:08]: bkpln4 for creating Application...
  [Sep 8, 2010 14:06:10]: error failed to create Scehma for application. Out of creating applications.
  StackTrace:
  java.lang.IllegalStateException: failed to create Scehma for application. Out of creating applications.
  at com.hyperion.planning.HspManageApplication.createApp (unknown Source)
  at com.hyperion.planning.appdeploy.HspSaxParsedAppDefinition.deployAppFromXML (unknown Source)
  to com.hyperion.planning.appdeploy.HspAppDefinition$ 1.run (unknown Source)
  [Sep 8, 2010 14:06:10]: error an error occurred when creating the application. See the log for more details. Failed to create Scehma for application. Out of creating applications.
  java.lang.IllegalStateException: failed to create Scehma for application. Out of creating applications.
  at com.hyperion.planning.HspManageApplication.createApp (unknown Source)
  at com.hyperion.planning.appdeploy.HspSaxParsedAppDefinition.deployAppFromXML (unknown Source)
  to com.hyperion.planning.appdeploy.HspAppDefinition$ 1.run (unknown Source)

  Check if the schema of the oracle user has sufficient privileges to create the tables, she needed, etc. Usually, if DBA Oracle Connect grants and resource it is enough, or more precisely, they need to provide the following privileges have been granted on a tablespace to the schema/user that connects: create table, create index, create sequence, create procedure, create session, alter session.

  See you soon,.
  Jasmine.