XP sp2 update

Similar Questions

• Vista SP2 update causing CompactFlash new hardware detection repeated even after installation of the driver

  I have a footstool of m8100n HP Pavilion Windows Vista Home Premium.  Since the Vista SP2 which was installed yesterday through the update of Windows, my PC guard detection of new hardware when I registered.  The application popup never ask again once, ask later, or update/search recommended for software to install what is recommended.  After selecting the option recommended and install the software that it finds, I get a popup about CompactFlash is now detected and ready to use material.  After this exercise, looks all right.  However, every time I connect as administrator or standard user on my Windows Vista computer passes through the detection of the same material and the update.  He should not have to repeat this after installation and update of itself for the new hardware.  What is the cause and Microsoft is aware of this problem?

  I worked with HP on the problem.  It wasn't a problem of driver from the manufacturer because it had no software update HP.  The integrated CompactFlash drive location doesn't have a drive letter assigned.  Do not understand why that would be a problem because on the removable media drive letters are assigned dynamically when you insert a card or a player.  Records didn't have drive letters when running on SP1 and it wasn't and issues then.  This seems to have become a requirement for SP2.

  The fix was to go in Windows disk management and pre assign drive letters to the disks 1 to 4 that are for CompactFlash removable media, MS/MS-Pro, SD/MMC and SM/xD-Picture on my HP m8100n PC.  Once this has been done and that Windows detects new hardware because of the SP2 update drivers, it installs successfully and is no longer repeat the detection/installation process.

• Computer won't start windows after SP2 updated which runs without error messages.

  Hello
  I have problem with SP2 update. After correct installation the computer not boot to windows and the screen is black.
  I have toshiba A55 S326 all of origin, on which I replaced HD (now 250 GB) and RAM (1 GB now). In past I have updated the bios to version 1.40 delivered by the producer.
  As I have new HD, I used the factory restore CD for Windows XP Home Edition. I have run all the updates that the system has been to download. Each think worked until I don't have install SP2. After correct instalation without error notice system invited to restart, I have confirmed, but the computer has not started load windows again.
  I tried several times, checked for possible errors, I used Critical Update 885626 before SP2 installin sugested, but all the time, same result. Black screen without loading Windows.
  You pls can someone advise for me what I have to do.
  As I have only the factory recovery disc, I'm not able to run the recovery console, because recovery is formatting disc before editing Windows.
  Can you pls suggest me how to get the WIndows XP or Windows XP Home Edition CD bootable recovery console.
  Thank you.

  Hi sake,.

  Welcome to the Microsoft Answers site.

  (a) you're able to boot in safe mode?

  If you are able to start in safe mode, then I suggest you to start in safe mode and install the recovery console that you already have a disk. See the article mentioned below.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I suggest you to activate the VGA (Video Graphics Array) mode and check. Follow the steps mentioned below.

  1 restart the computer and press F8 and choose Enable the VGA Mode in the menu options Start early

  Method 1:

  To use the safe mode option, follow these steps:

  1. reboot your computer and start typing the key F8 on your keyboard. Select safe mode from the menu.

  For more information, see the article mentioned below.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Let us know if it works so that we can solve problems more.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows vista SP2 update failed twice

  error code 800F0816 - when the vista sp2 update is completed and the facilities, it goes in a restart, windows does not load and I get the error code after crossing the repair mode

  The error is related with component maintenance (EC).
  According to this list of common CBS errors:

  800F0816 - express package was not completely downloaded. The status of the operation was recorded while the package is downloaded. An express package is a package that you are installing by using Windows Update. With these packages, only the files needed for that specific computer are downloaded and installed (unlike when all is downloaded to a computer).
  There is no action required on your part, wait for the express package is downloaded.

  Alternatively, you can:

  (1) post this question on the forum Vista and Windows Server 2008 Service Pack 2 .
  2) Contact Ms. for * support for free * to get SP2 installed.
  (3) to download the full package standalone SP2, Save and then read this prior to installation:
  Learn how to install Windows Vista Service Pack 2 (SP2)

  All the foregoing does not mention it, suggests strongly that you be completely and totally turn off the installed
  Suite antivirus/security surveillance system or even uninstall it before you attempt the installation of SP2.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Vista premium sp2 updates fail with error 80070643 dt000

  Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?

  Hi Ruth,

  Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.

  Method 1:

  You can perform the steps described in the article.

  You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
  http://support.Microsoft.com/default.aspx/KB/958052

  If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete

  Note: If you have already completed the steps in this article, you can go to the next method.

  Method 2:
  

  You may need to restart the Office Source Engine (OSE) service

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information helps. Response with status so that we can help you.

• How can I get the product key online for the vista sp2 update which is not genuine

  How can I get the product key for activation of vista sp2 update which is not genuine online?

  Khaled, you know something that is not Microsoft. Well, I hope that you are not a Microsoft Support Engineer.

  Copied from the Microsoft Web site...

  The purchase of Windows Vista
  Microsoft sells more than Windows Vista, although we will continue to support.
  Visit your local retailer or online to buy a PC with Windows Vista.

• Vista Home Basic - 0xc0190005/12223/56066 SP2 update error code

  I have a Dell Inspiron 1545 under Vista Home when I get this message above. I have tried to reinstall office but impossible--tried all the options proposed - including the restoration and all reinstall them by disk Dell. Whenever he gets insofar as the error code and stops.

  How can I fix it?

  Hi MarkBrock,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Vista-Home-Basic-SP2-update-fails-error-code/48081348-0c94-473f-BAC9-f1e0f41a664b

  I hope this helps!

• Tecra M9-136 - BSOD during Vista SP2 update

  Tecra M9-136 asked this morning to upgrade to the Vista SP2 and in the process the BSOD 0x0000007E arrived. Restarted in Mode safe and continuous Setup and then finally reported that the update failed - and came back to SP1. It took most of the morning.

  It will start in Safe Mode, but on a start normal, Vista SP1 gets through fingerprint recognition and then fails with the same BSOD (there is regarding the display of the desktop).

  The laptop has BIOS 1.80 level. I tried in safe mode to install 1.90 but he told me that the battery has insufficient charge and the AC adapter is not attached. Both wrong.

  Stuck - need advice. Could this be a hard failure? Can't see how I can update whatever it is if it's a soft fault.
  Thank you

  Have you tried to make back the OS to an earlier time before the SP2 installation started?
  You can do it in safe mode.

• Satellite A300 - easy (key) does not not after SP2 update

  Satellite A300 easy (key) does not...
  I have recently upgraded my Vista SP1 to SP2 (do not know if this is the problem, but I'm pretty sure that's not)

  Yesterday, I discovered that my easy keys no longer work. Lights are out, when I press the keys, the light comes on and goes off again as they do normally, but no reaction on my screen (can not turn on any light without restarting my computer and select turned ON manually cannot transform media of windows opened by the touch and play the key do not work).

  Is it supposed to be a driver or something for this?

  Sorry for the bad English...

  Hello!

  A few days ago, I had the same problem on my laptop Qosmio. Lighting keys stopped working after installing some updates and the 3rd application programs the keys no longer works and also the lighting.
  At the end of the story, I had to reinstall Windows :(

  In any case, now, you should try to reinstall the Toshiba value added Package. He controls these buttons that you want to say and you can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before installing you need to remove the old version first, restart the computer, clean up your Windows with CCleaner for example, restart again and then install the new VAP.

  Good bye

• Satellite M110 - Wireless does not not after XP SP2 update

  My wireless connection on my laptop (M110) stopped working after the update to windows XP SP2.

  The error I get is:
  "Windows cannot configure this wireless connection. Start the automatic wireless configuration service.

  How can I solve this problem?

  Hi mate,

  Finally, I found an interesting article that might help with your problem:

  http://support.Microsoft.com/?scid=kb%3ben-us%3B871122&x=19&y=12

  Hope your problem will be solved...

  Good bye

• the Vista sp1 sp2 update error, error code: 800f081f

  Hello

  When I try to update my windows vista family premium 32-bit OS to sp2 it says error code 800f081f. I tried installing stand-alone, all trouble shooting steps (anti virus - dye, with some Member States of the tools and c) recommended by the ms tech support guy, but I am not able to solve it, my laptop is dell 1545.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Vista Home Edition SP2 update fails on reboot

  I tried to go through the SP2 Auto x 2 update and whenever it gets to a point where the system restarts, it freezes with:

  !! 0xc0190036! 940/99370 (certcli.dll) on the screen and I need to go through a restoration to bring back Windows.  Once I do this Windows, it works very well.  I have over 200 GB free on my disk.  It's Windows Vista Home edition 64-bit...

  Suggestions to make this upgrade work?

  Hello

  Run the update tool for Windows Vista system and follow the suggestion below. To run the tool, follow the link below.

  http://support.Microsoft.com/kb/947821/en-us

  As the auto update option to install Windows Vista Service pack 2 fails, you try to install the Service pack manually. Follow the link which will take you through the process.

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Note: Before you start to install the Service Pack, disable the security software installed on your computer, such as sometimes conflicts with the installation process. The security software again once installation is complete.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• NET 3.5 SP2 update KB985254 does not appear to install correctly.

  I use the automatic update of Winows on my XP Pro SP3 and when I was asked to install the updated Net 3.5 SP2, I did it and it appeared to install correctly.  However, Winows Update icon appeared again and again.  Then I noticed that when I stopped my FCP, there was an update waiting to be installed.  I logged off the coast, the update appeared to install but when I started, there was the ison of update again.

  On my laptop, installed upgrading, a reboot is required and installation is complete.

  Why my office co does not work?

  This is the same update offered over and over again.   I started the installer of Winows, removed the update in Add or remove programs and reinstalled, but the offer does not go far.

  However, I subsequently installed four optional updates, including Microsoft .NET 4.0 Framework Client Profile for Windows XP x 86 (KB982670) and the problem disappeared.  All just lucky, I guess.

• Update on call for ask the SP2 update after several 'successful installations.

  I tried to install Vista Service Pack 2 several times in recent months.  Whenever I get the message "successful installation" about 45 seconds after starting installation.  Obviously is not a successful installation as the update takes several minutes up to an hour to install it.  A few days after each installation of 'success' updates Windows will ask to install again.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP2?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~~~~~~~~~~~~~~~~~

  Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 and select the appropriate category (e.g., download problem, installation problem;) Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Office 2007 SP2 update tries to install repeatedly, even if Office is not installed

  Hello

  I have a PC running Windows XP Professional, connected to a corporate network.  In the past, Office 97 was installed, but it has since been uninstalled. Any Office program is now reported by Add/Remove programs.  Other computers on the network have Office 97 installed.

  On this particular PC "Automatic Updates" reported that "the 2007 Microsoft Office Suite Service Pack 2 (SP2)" must be installed. I let settle and the notification disappears until the next time I restart the PC, after which he reappears. This happens repeatedly.

  How can I stop this behavior, please?

  Best regards

  David

  Hi DavidTM,

  Try to rename the software distrubution and c:\windows\system32\catroot and see if the problem is resolved: http://support.microsoft.com/default.aspx/kb/822798

  You want this update?

  If you don't want, you can hide the update.

  1. click on view available updates
  2. right click on the update you want to hide
  3. click on hide update
  4. confirm the UAC if necessary

  Here is a sample screenshot:

  

  It may be useful

  Thanks and greetings
  Aziz Nadeem - Microsoft Support