XP to Vista All in one 6310

Similar Questions

• All-in-One 6310 all lights flash when you scan multiple pages

  When I scan more than 8 pages, all the lights on the 6310 flash and the State a power reset is necessary.  I also have the same result when trying to send a fax from page 14 of the fax journal.  For me it seems to be running out of memory, but I thought that he used the PC for this.  I am connected via Ethernet.  When I scan a small amount of pages, everything works fine.  When I fax directly from the 6310, all 14 pages communicate very well.  In the manual or online that seems to cover this issue, there is nohing.  Has anyone seen this and it is resolved or it's just a limitation of the product?

  This can happen if the power cable is connected to a surge protector or a power strip. try to plug it into a wall outlet directly if it is not.

• HO Officejet 6310 all-in-one: 6310 print only 1/2 of the first photo on 2 5x7s

  I use HP photosmart Essential 3.5 on Win 7 pro 64 - bit Home to print photos, I am printing 2 5 x 7 photos by 8.5 x 11 pages, the printer load photo paper and sometimes sends an error "on paper", I hit ok and it prints but it prints 1/2 or less of the first photo and any 2nd photo the quality is great, just want to print the entire photos and no ink on half of the photos, any help would be great thanks.

  Thom

  Thom,

  Sometimes, the results depend on the program you're using to print.

  Test the printing of two photos on 'plain paper '.

  Make sure that the media type is correctly selected (Photo paper)

  Try / consider:

  Try to print pictures using Windows Photo Viewer > as well as other settings, check that you have enabled "Copies of each image.

  

  Reference and examples:

  Print - Programs_and_Methods

  Section:

  • Photo printing with Windows for Windows Photo Viewer

  Paragraph > print Photo on the main plate

  -----------------------------------------------------------------------

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Officejet 6310 all-in-One fainted during the printing and copying

  I have an Officejet 6310 all-in-one.  I have Windows Vista.  Yesterday, I replaced the black cartridge with HP98.  Now when I make copies or print a document, print the page gets more light and more light, about 1/3 to 1/2 through the page and very light down by a horizontal white line through the text.  I cleaned the cartridge with a damp cloth, I ran the command of cartridges clean but also align the cartridges.  I turned off the printer and unplugged and restarted again.  When I run a self-test page, especially the black line went up to 2/3 of the way, then it is empty at the top and gets darker, then the last 1/3 is fine.  The test pattern shows a few holes in the grid to black.

  I just checked the cushion under the black ink cartridge and it is saturated with ink.  I don't know that is where the problem originated.  I would be very grateful of any advice to solve this problem.

  Thank you.

  Is it a HP cartridge or a charging/reman?  It seems to be a faulty cartridge.  If it is an original HP, then check the warranty of the cartridge as shown here.

  It is unlikely that the ink that you see in the field of the service station is the issue.  The ink that you see is the result of the normal maintenance routine that the printer uses to keep the printheads from clogging.  It is normal that there is ink in this area.

• Cannot print from a scanner - printer all-in-one HP Officejet 6310

  Original title: cannot print scanner

  I just got a windows vista-based computer, and I can't print from my scanner. The diagnosis says that the

  scanner it works correctly. Can anyone help. the computer does not display a scan or a screenshot.

  I use a HP Officejet 6310 all-in-one printer.

  Hello
  
  What exactly happens when you try to print any file?
  
  Try to print a test page and check what is happening.
  Reference: http://windows.microsoft.com/en-US/windows-vista/Print-a-test-page
   
  Also, please refer the Sub articles that might help you.
   
  Solve printer problems
  Change your default printer
  What are printer permissions?
  Printer in Windows problems

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Cannot install HP Office Jet 6310 printer all in one

  I have windows 7 Home Premium and I am unable to reinstall my Office Jet after I factory restored my computer a virus. The ref system flags me to tell me that my system will not support this printer/scanner/fax. I need to Windows 98, Me, 2000 or XP.

  Original title: HP Office Jet 6310 all in one

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Try printing HP and Scan Doctor for Windows
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  Good luck, you need to update or reinstall the latest driver.

  HP Officejet 6310 all-in-one printer drivers<-- set="" to="" your="" version="">
  Windows
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1119598&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP Officejet 6310 All - in - One Printer - Support & Troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=1119598&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• All-in-one OfficeJet Pro 6978: OfficeJet Pro 6978 creation for Vista 64-bit Home - where are the pilots?

  Hi - Install CD says operating system not supported. Cannot find drivers - that the reference to "Readiris Pro for HP 14". Support video says to look for hppiw.exe which I can't find on a HP site.

  Is the problem that the 6978 OfficeJet Pro cannot run with my operating system Vista Home 64-bit? I bought yesterday, so I can return it.

  This should be simpler, so THANK YOU for the help and advice.

  Hello

  The printer is incomaptible with Vista 64-bit.

  You can find the system requirements below:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  Kind regards

  Shlomi

• Install HP Officejet 6310, printer all in one

  I loaded and began to run the instalation of the complete software for the HP Officejet 6310 printer all-in-one on my new Dell Inspiron N7110 Notebooks. It runs Windows 7-64 bit. After the end of the excerpt, it stops just running. It should go in the installation process, but it doesn't. Can someone help me?

  See if you can find the folder of extraction of HP that he created, then run the installer in there.

• scan several doc page on vista with hp psc 1215 all-in-one

  I have Vista 32-bit with SP2 and a printer all-in-one hp psc 1215.  There is no driver to download, the printer works under Vista.  I understand that I may use just mspaint or windows photo gallery to scan to the computer.  Is there a way to scan multiple pages in a doc for sending e and recording on the computer?

  The only formats I can see painting and Win Photo Gallery are bitmap, jpeg, gif, tif and png.

  My computer expertise not much!

  Hello
  
  There are many alternatives like this
  
  
  
  You can download this free software from the following link:
  
  http://en.pdf24.org/pdf-editor.jsp

  If plain text, you can edit PDFs too.
  
  Kind regards.

• 4315xi-HP all-in-one: use scanner 4315xi hp Windows vista operating system

  I just upgraded my desktop computer Dell 5100 from XP to Vista Ultimate and found the drivers for the print side and it works. Can't get scanner with Vista.  Roger Black

  Hello @rblacj ,

  Welcome to the HP forum.

  I understand that you have problems of analysis after the upgrade to windows vista.

  I want to help you.

  Something must not have installed correctly.

  Try to run the HP print and Scan Doctor.

  I also noticed that two updates, you have those installed?

  HP Officejet 4315xi all-in-One printer - software & drivers

  Please let me know if you need more assistance.

• Impossible to Document with HP Officejet 6310 all-in-One scanner

  Dear all,

  I have a HP 6310 of all-in-one desktop. My scanner was working fine until I changed my PC running on Windows & Pro. I tried various solutions proposed by the community and the last test has been with HP Print & Scan Doctor 4.3. Follow the instructions on the screen. Also I could hear the ROAR scanner far when the message to display "HP Scanning" window showing on the monitor. The program checked all checks i.e. Device Manager, Scan Driver Check, device status, window (WIA), solution, registry, Scan Flow Manager & Digital Image Monitor HP Center. Only two controls that had yellow Triangles were HP Scanner Twain and Front Panel Test. The HP Twain Scan error message was ' the twain component is used by another process even after a reboot. Remove the software by clicking 'uninstall '. Reinstall the software with the product CD or by downloading the latest full features software of HP customer service (recommended). Note: You should always be able to scan from applications such as Microsoft Paint. If this will meet your scanning needs, and then click 'Skip '.

  I am not that technica l and would really all members to guide me through the process in order to get scanner work. When I go through the movement of the scanning of a document via the HP Solution Center, I go for the selection process the file type I want the document to be registered as (somewhere e.g. office) but get an error message. I would appreciate help to resolve this matter without spending money to call the telephone helplines HP as currently unemployed. Thanking you in advance.

  Shabbir soso

  Hi Jamieson,

  I just wanted you to know that after following your instructions for uninstalling and doing the clean boot procedure, my scanner works now - thank you.

  Shabbir soso

• HP Deskjet 6310 all in one: Deskjet HP 6310 all in one wireless printing functions

  I have a HP Deskjet 6310 printer all-in-one and want to know if this printer has wireless capability (i.e., can this printer receive orders for wireless printing)?   (Note, I have a new MacBook Air wireless with send feature).

  @NickC3

  Your printer:

  All-in-one printer, HP Officejet 6310 range

  The printer specifications indicate the printer works with 2 USB, a wired Ethernet connection and - with an adapter - with Bluetooth to be printed.

  Thibault system requirements:

  • USB 2.0 full speed, front and back ports

• 3520 e - all - in - one deskjet Seri: download the software of the e-all-in-one series HP Deskjet 3520 for Windows Vista

  I can't find a software on the HP website for my e-all-in-one printer Deskjet 3520 so that I can scan documents in the form of PDF files.  At present, I can scan only to Microsoft Paint.  My original disk is damaged.  I contacted HP Support by phone and was informed that they are no longer supplied the software download for Windows Vista, that my computer is running.  I was told that there is a way around this, that can make me to level.  Unfortunately. After being moved several times and queued contiunous, I never got a solution.  Does anyone know where I can download the software online or I want Norman to do?

  Hi WYM1,

  Here is the LINK for your drivers for the Deskjet 3520 with the Windows Vista operating system.

  I hope that this solves your problem. Let me know!

  Thank you

• Upgrade to Windows OS 8.1 for all-in-one printer, HP Photosmart C4385 of Vista

  My old HP laptop used the Windows Vista operating system. All-in-one printer, HP Photosmart C4385 worked very well. I have a new HP computer that manages the new Windows 8 operating system and I can't load the printing software as the new operating system is incompatible with the printing software. It is certainly another available driver so I can use my all-in-one. Please let me know what the fix is far ahead, but a new printer.

  Hello

  Software for Win 8.1 can be downloaded from the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=3651156

• Cannot print in color of HP Officejet 6310 all-in-one

  I have a printer all-in-one color HP Officejet 6310, connected to the network. The ink levels are fine - I just bought new ink.

  The printer cannot print in color, my computer Windows laptop, no problem, but will print in black & white Mac.

  Why? Y at - it an option for color printing that I haven't checked? How can I fix?

  go to the icon of the Apple at the top left > system preferences > printers and scanner/print and scan / print and fax.

  remove the printer using the "-" lower-left next to the icon (+)

  After you remove > press the plus (+) icon.  > Click on 'Add a printer or a scanner', if it has given you this opportunity.

  in the new window > click on the name of your printer. Then check the bottom > NAME, LOCATION, PRINT USING (USE).

  Make sure the part "USE" or "PRINTING to AID", it should be the AIRPRINT printer name not.

  Then ADD at the bottom right. > try to print in color now.