XP will not complete boot. Message says it can't find disk hard on 0 press F1 to continue. When I start it

Similar Questions

• 3.6.8 patch will not install. Message says that it cannot find liscense... .view homepage. What can I do? Using XP version 3.6.7

  3.6.8 patch will not install. Message says that it cannot find liscense... .view homepage. What can I do? I use XP and Firefox version 3.6.7

  This has happened

  Each time Firefox opened

  Is since mid-July

  Do a clean reinstall and download a new copy of Firefox since http://www.mozilla.com/firefox/all.html and save the file to the desktop.
  Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  You can skip the step to create a new profile, which is not required on this issue.
  .....
  See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes

  audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes

  Hello ShawnKohl,

  We can also try to go back to a time where he worked with system restore.

  Once this has been done, check the hat of Windows updates are available and hide the audio driver updates that are available.

  System Restore:

  Windows XP - http://support.microsoft.com/kb/306084

  Windows Vista/7 - http://windows.microsoft.com/en-US/windows7/products/features/system-restore

  Updates of masking:

  http://support.Microsoft.com/kb/902992

  Please note that in addition to that, the advice of the previous poster remains true: we want to get the latest audio driver on the system of the manufacturer.

  Best regards

  Matthew_Ha

• just updated to Windows 10, Photoshop cc 2015 will not open.the message says MSVCP110.dll missing

  I have just updated to Windows 10, Photoshop cc 2015 will not open.the message says MSVCP110.dll missing

  Just fixed this problem for me:

  Open the file/Program files (x 86).

  Search: vcredist_x64.exe

  3 results popped up for me. I ran all three and it fixed the problem for me. Hope this works for you as well.

• Windows\System32\LogiLDA.dll what is this file and I need this file? The message says it can't find the module.

  What is this file and I need this file? The message says it can't find the module.

  Hello

  You have recently uninstalled software Logitech?

  Follow the steps in the solution here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/specified-module-could-not-be-found-logildadll/9c227c15-D0D6-4e24-946f-ac0dbbbb10d1

• Trial of 13 elements will not be installed; message says installation file is corrupted.

  I get this message: Application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. I tried. Without success. Help?

  Pattondogs it is available to any Mac computer that can run it.  You can find more information on the upgrade of the Mavericks (10.9) at the Apple - update your Mac OS X Mavericks..  You can also find the minimum system requirements to Apple - OS X Mavericks - read the specifications..

• I still have to press F1 to continue when I start my computer it says secondary drive not found

  Whenever I restart my computer, I get this message "Secondary Drive 1 not found press F1 to continue, F2 to run the Setup utility" so I just pressing F1 all the time, can someone help me solve this problem, so I do not hit anything, so that the computer will go just directly on windows, I have a Dell Dimension 3000 and running windows XP.

  Thank you

  Hi smiley1958,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  Method 1

  Usually, this would happen if the system basic input/output system (BIOS) settings are incorrect.

  See the link on the Dell forums and try the steps mentioned, check if it helps.

  Method 2

  If the previous step fails, then you will need to contact Dell support to fix the settings in the basic input/output system (BIOS).

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• 2010 Macbook Pro will not complete Boot

  For awhile, it should boot into Setup from the hard drive, but now we can't start at all in anything whatsoever. Often the progress bar will be stuck around the Middle, but when it does not go beyond, the bar fills completely, but it does not start. I tried to reset the PRAM, SMC and boot into safe mode. Safe mode gave me a screen of panic, I'll post below. We tried to boot from a well-known player, external installation media, and even an installation DVD and nothing has worked so far. Unbootable in no recovery mode.

  You have a hardware failure.

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test and ask specifically for the VST (video systems Test)

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• Vista 32 bit will not complete installation, computer says drivers are outdated.

  Hello and thank you for your interest to help me!

  My laptop MSI recently broke down after a year long and courageous, overheating I speculate... So I need to reinstall Vista, since I have no backup discs (shame on me!)... This is where it gets complicated...

  I try to install my Windows Vista Ultimate 32-bit, sometimes to "complete installation" and then goes no further.

  I speculated, it might be wrong with the drivers, I went to the website of MSI, found my model and burn it on a CD. During the early stages of installation I chose to locate the drivers, the computer shows me those that I put on the disk, and then when I hit 'next' I am told that pilots I've selected are outdated, which is strange, because the way they come directly to the site of companies.

  Some additional info:
  -I can not start the computer in safe mode or normal mode, it keeps loading.
  -None of the partitions in computers 3 contains no data.
  -Once the computer restarted I tried to insert the disk that contains the drivers... Did nothing.

  Your help to find my poor baby and running is very appreciated!

  Overheating can cause a lot of problems in a computer.

  If the info on how to do a clean install is not enough, you must contact the manufacturer of the computer.

  Here's how to do a clean install:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• My iMac will not complete boot the system

  After an unexpected break in power, I can't finish the start of my iMac. I tried to start in safe mode several times and loading bar appears but stops at halfway to load, then eventually the computer turns off. I tried to reset PRAM once. Same thing is happening. Not very experienced, so if you have a possible solution, I can try, I would be grateful for detailed instructions. I don't have an additional disc and will lose all files, if I can not do.

  Sorry to hear that. If you do not have a backup you should stop trying to fix it now. You may lose all your data. Take it for a free trial at any Apple store.

• I just bought 6 Lightroom on DVD and it will not be installed. message says OS disappointed requirment, Windows Vista not supported. I have Windows 7, NOT in Vista. What is the problem?

  Just bought 6 of Lightroom and it don't be loading not - says OS requirement not met (whatever!) and Windows Vista supported nopt. I HAVE WINDOWS 7, VISTA NO. Add to my frustration, I can't just talk on the phone to ask a question, I have to go through any of this bubble.

  Try installing lightroom 6 on windows 7 get interface requirement not met windows vista not supported

• sl300 will not complete boot

  I suspect that this is caused by the latest XP update. I did a system restore and disabled the automatic update and it seems to have solved the problem, at least for now. Does anyone else have this problem?

  
  

• I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation. What should I do?

  I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation.  What should I do?

  Hi BartlettNYC,

  Please see the links below, to solve the problems with Window XP SP3.

  Steps to take before you install Windows XP SP3.

  http://support.Microsoft.com/kb/950717

  How to troubleshoot a windows XP SP3 Installation failure.

  http://support.Microsoft.com/kb/950718

  Good luck.

• Windows Vista will not complete installation on SATA hard drive

  I tried to install Windows Vista Home Premium 32 bit on a new desktop computer Acer X 1200 (less than 1 year).  Vista recognizes the drive, format and copy all the files on the disk installation.  Then restarts, is preparing to launch for the first time and get to the part where it says installation finished and hangs there.  The green progress bar does not move and it hangs indefinitely.  The hard drive is SATA and I put a new disc in hard, but exactly the same thing happened.  The motherboard has no IDE port on it and there is no option in the BIOS for the IDE emulation.  At this point I think the motherboard is bad, but I am working also on a laptop HP 1 year with SATA hard drive that does exactly the same thing.  The two systems are pre-installed with Vista Home Premium.  The two systems see the hard drive, but will not complete installation.  I even tried to run the WD Tools Data Lifeguard before installation with no luck at all.  There is no error message or error code, just of hangs and end no installation.  You have any suggestions for this?  Thank you.

  What was my problem I bought the equipment... like motherboard, memory, cpu, and video

  Vista would not be install.would blow on the end of the installation so I tried to put it natively and it worked!

• I reinstalled Windows 7, but the product key is not accepted. Message says that the product key is upgraded only, not for the new installation. What should I do now?

  I have re installed windows7 and product activation key is not accepted. Message says key is valid only for the upgrade. What should I do now?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us