XPC questions-LaunchServices, CFpreferences, El Capitan errors

Similar Questions

• Question of Netrestore El Capitan

  Hi all

  I was OS X deployment in an educational environment for a number of years. I've always found the hitherto very robust imaging process. I have problems with Netrestore and El Capitan. I first created a Netrestore image of the El Capitan.app downloaded from the App Store. Then, I photographed an iMAC and added software and OS default value. This has always worked with earlier versions of Mac OS X. I'm also under El Capitan on the server. I've had mixed it.

  First of all it is very slow for the actual image start if not in reality. Most of the time it is just with the start bar gray to three-quarters. Other times I get a GUI with an error box. I looked online and found the problem of SIP.

  My Apple computers are all on the same subnet and at the moment I do not use the bless command as I am always test etc. However, I added the server to test each computer and also created an image with the included bless. But the problem persists.

  After reading a forum about other people having similar problems, I tried to deploy the image of El Capitan of a Yosemite server as suggested by someone who had the same problem. It was no different. Then, I created a new image of Yosemite and it imaged in no time at all and without any problem.

  Has anyone else had problems with El Capitan imagery? I'm doing something wrong?

  Any advice would be very welcome.

  Kind regards

  Gary

  I have it exactly the same problem.  I used netrestore for years without any problem.  Now, as you say, it is therefore more "robust".  Imaging a computer of my Imaging Server (El Capitan run), he usually does OK, but a percentage of the time it won't start here that begin Imaging.   Usually, I make my images not automatically install a certain reader, if I get a stop at the page "select the drive to install on.  If he gets that things go well, OK.  The grip is exactly where you say with the bar about 2/3 of the mode of progression to get to this page.  In other words, it is starting, not the image itself.  If they get to the step of imagery, I did have a problem there.

  Now when I try to do 7 computers simultaneously (8-port switch), I get about 4 actually get booted up and ready to install.  If I take the 3 who are hooked, maybe one or two will get there - slowly.

  I tried another server of the same model with the same result.  The only thing I can see is that I had to redo a lab last winter and put a picture of El Capitan similar to I am now trying to using the same Imaging server and no problem.  However, in time, the Server will be running Yosemite.   Now this server has been upgraded to El Capitan.

  What is the SIP issue you're talking about?

  I offer so there is no help other than the comfort of misery shared!

  I have a picture of Yosemite - I'll try it as an experiment and see what happens.

  Hoping for the best,

  Chic

• Office 2016 on El Capitan: error report Microsoft that closes unexpectedly

  For my Office 2016 applications on the latest version of Mac OS X (10.11.4) through my subscription to Office 365, I encounter the error, 'Microsoft Error Reporting close unexpectedly,' launching applications in normal mode.  I can, however, open Office applications in safe mode.  I have completely removed, re-installed, re-authorized and re-update of the office suite.  While in safe mode, I have disabled the Microsoft error report request (PRM 2.2.9) using the preferences pane.  (This application is located in/Library/Application Support/Microsoft/MERP2.0).  I'm running on an iMac of mid-2011.

  I'm in a dead end total current office productivity.  Any idea on PRM and how to disable or secure it would be appreciated.

  Thank you.

  I have to add the following in the Console I have launch MS Word and encounter the error:

  09/04/16 12:32:08.760 PM taskgated [155]: no identification of the expected demand, cannot use provisioning profiles [pid = 503]

  09/04/16 12:32:11.257 PM taskgated [155]: no identification of the expected demand, cannot use provisioning profiles [pid = 505]

  09/04/16 12:32:20.609 PM Microsoft Word [503]: NSAllowAppKitWeakReferences = YES

  09/04/16 12:32:20.715 PM Microsoft Word [503]: ApplePersistenceIgnoreState: existing State is not affected. New State will be written in /var/folders/3v/gobblygookhere/T/com.microsoft.Word/com.microsoft.Word.savedSta you

  09/04/16 12:32:20.953 PM taskgated [155]: no identification of the expected demand, cannot use provisioning profiles [pid = 513]

  09/04/16 com.apple.xpc.launchd [1 12:32:22.641 PM]: (com.microsoft.errorreporting.122272 [513]) Service was released due to the signal: Segfault: 11

  09/04/16 12:32:22.636 PM diagnosticd [104]: error assessment process info - pid: 513, puniqueid: 513

  09/04/16 com.apple.xpc.launchd [1 12:32:22.808 PM]: (com.apple.ReportCrash [515]) endpoint has been activated through legacy launch (3) API. Please go to XPC or bootstrap_check_in(): com.apple.ReportCrash

  09/04/16 12:32:26.739 PM ReportCrash [515]: report of incidents recorded for Microsoft Error Reporting [513] version 15.20 (15.20.16031500) users/XnamehereX/Library/Logs/DiagnosticReports/Microsoft error Reporting_2016 - 04 - 09 - 123226_iMac.crash

• El Capitan - error connecting to server Apple ID

  In recent weeks, I get this message from system preferences-> iCloud, iTunes-> account-> bought iBooks.

  All these bring to the top of the page 'connection '.

  I get the following error:

  

  I turned on the Console - deleted newspaper - hit the signature key and get the following error messages.

  05/04/16 7:41:10.424 AM akd [398]: NSURLSession/NSURLConnection HTTP load failed (kCFStreamErrorDomainSSL,-9802)

  05/04/16 7:41:10.648 AM akd [398]: NSURLSession/NSURLConnection HTTP load failed (kCFStreamErrorDomainSSL,-9802)

  05/04/16 7:41:10.862 AM akd [398]: NSURLSession/NSURLConnection HTTP load failed (kCFStreamErrorDomainSSL,-9802)

  I looked on the discussion lists - and found nothing to help.

  I uninstalled Little Snitch, I have ESET Antivirus (start-up and shutdown has no effect), I have iStat (no impact)

  I have admin authority.

  I checked my certificate in Keychain Access-> system - some Apple certificates had expired, but do not know how to renew. Set it to accept anyway.  I can turn that back.

  Messages, Contacts, Mail, calendar, Facetime, iCloud.com - all work fine.

  There are other users of this system - they have no problem to accede to these requests with the same AppleID.

  Running OS X El Capitan 10.11.4

  I'm running out of options.

  Any ideas before paying and call Apple Support for hours on the phone?

  Try keyring - preferences - certificates

  the value ocsp and CRL 'best attempt.

• a stupid question about the string conversion error

  I learn generic

  well generic allows setting the data type that you add to the fields of the object, right?

  I made a simple example

  class generic < String >

  {

  The name of the string;

  void set (String name)

  {myIdName = name ;}

  String get() {return myIdName ;}

  }

  class using {}

  Public Shared Sub main (String [] args)

  {

  generic < String > gn = new

  (generics) < String >;

  GN. Set (90);

  System.out.println ("name entered is:" + gn.get ());

  }

  }

  now the line

  GN. Set (90);

  I know that I send a string to the value method, but I wanted to see the error that comes when I send the argument of type other than a string and sent 90 to set method (without quotes)

  the error that slammed me is

  method defined in the class generic < String > cannot be applied to the given types

  required: java.lang.String

  found: int

  reason: int real argument cannot be converted to a java.lang.String by method invocation conversion

  corresponding to a variable of type String: String extends the object declared in the class generic

  OK here is my stupid question

  I know that int cannot be converted to a string and put 90 quotes will correct the error

  What intrigued me is the last line

  "Chain extends object declared in the class generic.

  
  

  I know that everything is under the object class

  that means that means line... ??

  thnq

  What intrigued me is the last line

  "Chain extends object declared in the class generic.

  
  

  I know that everything is under the object class

  that means that means line... ??

  Which refers to the class definition you provided:

  generic class

  You "stated" in your 'generic' class a 'collar' stretching ' the object '. It reads as if it said "String declared in the class generic.

  See "Generic Types" in the Java Tutotial

  http://docs.Oracle.com/javase/tutorial/Java/generics/types.html

  Search for the word 'object' and you'll see that word highlighted in the world. Although it appears highlighted read this line:

  As you can see, all instances of the object are replaced by T. A variable of type can be any non-primitive type you specify: any type of class, any interface, any type of table or even another variable of type.

  On this page, you will see this:

  A generic class is defined with the following format:

  class name { /* ... */ }
  

  Where each one is read as: T1 extends object ', "T2 extends object", etc.

  When you said this:

  generic class

  You replaced "T1 extends object" with "String extends object".

• A question about the number of error indicated by SQL line * more

  Hello everyone,
  
  OS: Fedora Core 17 x86_64
  Oracle version: Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  
  I have a question for the line number specified by SQL * more whenever he is in error (syntax error, for example) in your script file. Consider the following script file (myscript.sql) which includes exactly 12 lines. Before the instruction to START I just put 4 blank lines by using - just to make the code clearer to read.
  

  HOST clear;
  SET SERVEROUTPUT ON;
  SET PAGESIZE 0;
  SET LINESIZE 1000;
  --
  --
  --
  --
  BEGIN
    DBMS_OUTPUT.PUTLINE('Hello');
  END;
  /

  DBMS_OUTPUT. PUTLINE at line 10 is obviously a mistake and it should be DBMS_OUTPUT. Put_line. However, if you run the script here is the output:
  

  SQL> @myscript.sql;
  
    DBMS_OUTPUT.PUTLINE('Hello');
                *
  ERROR at line 2:
  ORA-06550: line 2, column 15:
  PLS-00302: component 'PUTLINE' must be declared
  ORA-06550: line 2, column 3:
  PL/SQL: Statement ignored
  
  
  SQL>

  for SQL * the error is in the line 2 and not 10.
  
  Any idea?
  
  Thanks in advance,

  >
  for SQL * the error is in the line 2 and not 10.
  >
  No - for Oracle, the error is in the line 2 and not 10.

  This is the code that sees the parser. What is the 2 line?

  BEGIN
    DBMS_OUTPUT.PUTLINE('Hello');
  END
  

• Build dataguard two other questions. password prompt and certificate error

  Instances of guard fiirt two data are built. It carries out the second I get this error in the log of all alerts. It seems that it is a certificate error, but I'm having a hard time nailing down.
  
  BTW: Instance is 11.2.0.1
  
  Thread 1 Advanced to record the sequence 318 (switch LGWR)
  Currently Journal # 6 seq # 318 mem # 0: +DATA/sfs01/onlinelog/group_6.4762.769266689
  Client SSL: Server DN does not contain name of SID WHEREAS
  Archived journal 706 extra for each thread 1 317 0x799622d4 dest ID sequence entry 1:
  Thu Mar 22 12:46:48 2012
  Client SSL: Server DN does not contain name of SID WHEREAS
  
  The third and final instance of data hold I build is 3 t and holding still to be restored. Two questions:
  (1) can I suspend rman and restart it.
  (2) when I restart rman how I stop it all asking me to specify the password. I'd rather put a nohup on a shell script.
  
  Here's the script. Right now I am running it manually but would relly to run with nohup so I can go to lunch.
  
  RMAN target auxiliary SYS@sor01_primary / < < EOF
  Run {}
  allocate channel C1 device type disk;
  allocate auxiliary channel C2 device type disk;
  allocate auxiliary channel C3 device type disk;
  allocate channel auxiliary type C4 drive peripheral;
  allocate auxiliary channel C5 device type disk;
  target database double standby nofilenamecheck;
  C1 output channel;
  channel C2.
  output channel C3.
  output channel C4.
  output channel C5;
  }
  EXPRESSIONS OF FOLKLORE

  Ok

  Therefore, this

  RMAN target auxiliary SYS@sor01_primary

  Would be more like this

  RMAN target sys/password@PRIMARY auxiliary.

  You should be able to pre-test to the command prompt.

  Then hard-code in a shell script.

  Best regards

  mseberg

• Question of TrueSuite of fingerprint - error: could not open impression fingerprint sensor

  Hello

  A few days ago my TrueSuite reinstalled himself and then asked to restart the computer, which I did. But things, when I turned on the computer laptop back to reboot, TrueSuite will have to reboot again. This happened a few times, so I reset the laptop to a system restore point, I had created a few days ago.

  This deleted all my fingerprints, which I don't mind, but when I go to re-register my fingerprints, it says: "error: could not open impression fingerprint sensor.»

  PLEASE HELP ME WITH THIS!

  Thank you.

  See European driver of Toshiba for the most recent software TrueSuite to fingerprints.
  Remove your old software of fingerprint of the computer and reinstall the new software downloaded from the site driver of Toshiba.

  Then set it up again, create fingerprints and take advantage of the laptop.

• Questions to THE El Capitan fixed yet 2016?

  Is anyone know if validation in Logic Pro X is resolved for all the current versions of * contact * play 4 East West * sampltank in El Capitan 11.3 yet?

  IMac 13.1 2.9 16 GB 1

  Yosemite 10.5

  No problems with Kontakt in LPX 10.2.1 and 10.11.3 or 10.11.4b

  Do not use the other two... but in the reports that I have read... almost all, if not all of these issues have been fixed in point 10.2 with El Cap 10.11.3

• Portege R100: question of recovery - disk partitioning error

  My old portege r100 doesn't quite work.
  I tried using the recovery CD product, but during the resumption of the process the following message apears:
  Drive partitioning error!

  What it means?
  What can I do to overcome?

  Thanks in advance

  Yannis

  Hello

  It seems that HDD might not be partitioned correctly.
  Perhaps the HARD drive is not ok?

  Check if the HARD drive is recognized and listed in the BIOS.
  If the HARD drive is not listed, then the HARD drive is dead and must be replaced.

  If the HARD disk is listed, then there might be a problem with the HARD drive partition table
  You could test the HARD drive by using a tool called Drive Fitness Test.

  You can also try to format the HARD drive first. You could fix this HARD drive on another computer by using a USB HDD controller. This allows you to access the HARD disk and format this drive

• Pavilion dv6: gel questions - Long and short DST errors

  Hello.

  Im having freezing randomly and stopping the laptop to answer. "" Do you have the test equipment fast twicw and expand and these errors appeared, 'short DST failed: 0GC49F-64983J-QFPK1G - 60 X 603'and'LONG DST FAILED: 0GC49F-64983J-QFPK1G-61FW03 '. Also the webcam stoped to work, but I don't think it's related. Do these errors mean?

  Failure of the [disk Self Test] DST indicates that your hard drive will probably fail in the near future.

  You should backup all important files, to create a system recovery media and replace the hard drive with the same size or larger than the original.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• Receive error messages when trying to install McAfee and it said their support that the question is related to the error in Device Manager.

  How can you diagnose errors in Device Manager

  Tried installing McAffee, but error message. Contacted McAfee... says the problem is in the Device Manager. How can I determine the error in Device Manager?

  Are you sure you don't have another Antivirus always installed; even an expired subscription?

  A lot of AVs will not install if they find one already installed (and you must have an AV installed in any case).

  Another problem may be how you try to install it:

  You need to download and save on the desktop > then right click on the saved files > select run as administrator.

  FYI: Here's how to look in the Device Manager:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  See you soon.

• Question Maplestory Private Server installation error

  Question, I love maplestory private servers, but whenever I try to open the installation program me repeat it cannot load the dll, I got the maleware, deleted registry and virus put all of my accidentally deleted dll files and he says still cannot load the dll... So I decided to just do a restart of the entire system with Acer eRecovery Management or recovery. However before I do I want to know if anyone of you could tell me otherwise

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Question of OpenCL El Capitan with MacBook Pro

  Hello. I gave my MacBook Pro (2014 15 "retina, 7200LE GForce 750) a new installation of El Capitan 10.11. The hard drive has been wiped and I reinstalled OS x from scratch. I tried to use the first with the Open CL GPU acceleration, but all my pause the video snippets like this. It didn't happen with previous OS Yosemite. Changing software of mercury reading only solves the problem, but I would use the Open CL. Any thoughts on how this can be corrected? My MacPro with AMD cards does not exhibit this behavior.

  It is a problem with El Captiain: now turn off hardware MPE.

• Questions HFR - "5200: query execution error: invalid item ID".

  Hi all

  We use the Hyperion HFM 11.1.1.3 application. We have recently upgraded to the Oralce Database 11.2.0.2 and reconfigured the HFM application with this new version of the database. When I tried to run the Financial reporting via the HFR studio, I get the error message - ' 5200: query execution error: invalid item ID ". Please could you help me solve this problem.

  Thank you

  Michel K

  It was because of the default angle that is invalid for the user which was inconsistent with the special report.

  Change the preferences to the preview from the user Point of view and rerun the report.

  File > preference > Financial Reporting > preview select 'ON' box under the Point of view.

  Re-run the report, then select the desired POV.

  This will prompt the user to change their POV every time that he or she opens a report. They can select the correct POV and the report runs successfully.

  You can turn off later. Let me know if it solved that problem.