XPERIA T and 4.3 Update emails not visible

Similar Questions

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• My e-mail address contains an underscore, when I send it in an e-mail message emphasizes computer it and the underscore character is not visible. How can I stop this from happening?

  My e-mail address contains an underscore, when I send it in an e-mail message emphasizes computer it and the underscore character is not visible. How can I stop this from happening?

  original title: underscore from e-mail

  Hello

  As it is a configuration issue with all versions of Windows, there will be nothing we can do from our end.

  If you want to suggest changes in the design here is the link you can make reference to: Microsoft Connect - back products and bug reports. Microsoft...

  https://connect.Microsoft.com/dashboard/Info/

  Hope this information helps you.

• KB978601 and KB979309 - Windows Update would not download

  Hello

  I'm trying to install all of the updates for my Windows 7 (x 64, PL), but both of the subject do not want to download. Windows Update all the time to see the "0 KB 0%. On my second PC, I also have Windows 7 (x 64, EN), but here all the updates (inside these two topic) were downloaded and installed successfully.

  Do you have some advice on this?

  eckko,

  The 'Ko 0% 0' indicates usually that updates were downloaded already in the system or that they are regulated, and the system is in a Quebec awaiting their download. Because updates are from April of this year, then it must be assumed that it is a new installation or reinstallation of Windows 7.
  Updates are intended to solve the problem shown here-
  Microsoft MS10-019 - critical vulnerabilities in Windows security bulletin could enable Code execution (981210) remotely

  Suggest you manually download the updates and Save them.
  Update security for Windows 7 for x 64-based systems (KB978601)
  Update security for Windows 7 for x 64-based systems (KB979309)

  When the download is complete, close all open programs and browsers. Try to install now.
  If they still won't install, and configure the system to boot from a clean state and see if they install.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  
  NOTE: in start-up mode minimum state all the 3 third party programs will be disabled. Unplug the network connection system it is or open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  If updates are not always install after doing above, then contact Microsoft for assistance to get installed.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Expert MowGreen Windows IT Pro - consumer safety

• Diagnostic report (1.9.0027.0) and my windows update does not work.

  Separated from this thread.

  I have almost the same problem, + my windows update does not work.

  Everything really slows down my PC

  Here are my results with MGAD

  Help please..!

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - YG69F - 9M66D-PMJBM
  The Windows Product Key hash: /kehptF9HHVxM5d8dUnqgcfndXw =
  Windows product ID: 00426-OEM-8992662-00497
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {A4E726A5-77E8-42E6-AE5F-6F881531F528} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.110408 - 1631
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: E:\Users\Andersons family Inc\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {A4E726A5-77E8-42E6-AE5F-6F881531F528}1.9.0027.06.1.7601.2.00010100.1.0.001x 32*-*-*-*-PMJBM00426-OEM-8992662-004972S-1-5-21-2881089878-228829905-3463415677MSIMS-7369American Megatrends Inc.. V2.0 20070612000000.000000 + 0000F5E3007018400F804260409FLE Standard Time(GMT+02:00)03103103Microsoft Office Enterprise 200712fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-6517814 ACD7202654E586

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00178-926-600497-02-1062-7601.0000-0032016
  Installation ID: 013476459360581333553453351230301256370565945071587434
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: PMJBM
  License status: initial grace period
  Time remaining: 11640 minute (s) on (8 day (s))
  Remaining Windows rearm count: 4
  Time to trust: 2016.01.03. 14:38:33

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: not registered - 0x80070005
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: NAAAAAIABAABAAEAAQABAAAAAQABAAEAJJQI2ASjydWksfYW8iziSz7piA6N7xiXME7I9A ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1118 APIC 061207
  FACP 061207 FACP1118
  MCFG 061207 OEMMCFG
  061207 OEMB1118 LASRYVITRAGE

  A copy of Lenovo OEM of Windows 7 Ultimate has been installed on a computer with a card mother MSI previous to the introduction of Windows 7... Copies of Lenovo OEM windows are approved by Microsoft for use only with a new Lenovo computer.

  The copy installed Windows 7 is a counterfeit. You must purchase a new copy of Windows or to revert to the original copy installed on the computer when it was bought new.

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Enterprise 2007 - 103 blocked VLK

  You have Microsoft Office Enterprise 2007 is approved for use by large companies, which is not normally found on a computer at home. The permit holder must validate the license. Until it is validated, you will not be able to update to Microsoft Office. If the holder of the license is your employer, you should seek their help, otherwise the software must be removed from your computer.

• Illustrator and Photoshop start Workspace is not visible.

  Since the recent update, my early work space is not visible in Photoshop and Illustrator. I turned it on in the preferences > General > Show 'Start' to work...

  After disconnection and connection, it works! (B)

• Accordion of scenarios and Plans to charge is not visible in the browser of the operator

  Hi Experts,
  Plans scenarios accordion and load toolbar is not visible in my navigator tab.it watch operator a few accordion only scenarios. Cannot create workload in the browsers of designer and operators Navigator.Im im not getting not why she does not appear.
  
  Please help me...
  
  Thanxs
  Siri

  Hey, it's on your version of ODI.

  with 11.1.1.5 version support Plans are available

• Xperia with Facebook app after update does not

  Xperia for Facebook does not work for me after the update. First of all, it was installed is no longer. After Installation it syncs, but other birthdays usually appear in the calendar or is visible in the mask of contacts in the account. Profile of high-quality pictures don't work because of this, too. Any idea?

  I received information that Xperia with Facebook is in the process of gradually and some features have already been removed. This is why the exact functionality depends on what device and software you have.

• Portege R700 and Win 7 Update detects not SP1

  Hello

  I have a Portege R700-1E8 with Win7 Pro.
  WinUpdate detects no SP1, but it has detected the other updates and installed their (the SO is enabled).

  If I install SP1 manually (downloaded as iso from Microsoft Download site file) it seems to be installed without problems.
  Yet, I picked up the phone to the original state and tried to detect the windows updates again.

  There are many upgrades available, but without SP1 AND IE9.

  Any ideea?
  Thank you

  Costin

  Hello

  > If I install SP1 manually (downloaded as iso from Microsoft Download site file) it seems to be installed without problems.

  So where is the problem if you were able to install SP1 manually?
  I had also some problems to install the patches in the past, that I could not install patches after system reboot and disable a 3rd party firewall, I could install necessary updates who received automatically by Windows 7.

  However, SP1 can be installed manually and it should be possible to install other patches automatically, so in this case, I wouldn't be worried

• Device driver USB Apple Mobile and iPhone download updates does not work

  I just got a new phone and I am trying to restore from a backup of my old. The problem is that my iPhone is not showing in iTunes. It appears in the 'My Computer' section as a device. There is a problem with the 'Mobile USB Device Driver' that I couldn't solve. Whenever I plug my iPhone, the said driver installed in vain. I tried to restart my computer, download iTunes more and try the solution where I change the driver to a section of the common media-files-Apple-Mobile device drivers, and when I do that, it says "Windows has determined the software driver for your device is up to date", although the small box yellow exclamation beside it. The choice of 'Roll Back' for the driver already installed is there, so I chose to see what happened. This allows the driver to "Mobile Device" appears, where my iPhone now charge when I plug it into the computer. I go to this device and try to install, and it refers me to a screen that says "Windows found driver software for your device but encountered an error when you try to install it" and then lists the mobile device as the problem driver. I think I can be "go back" to a bad driver, but I can't find out how to download a driver that is correct and working.

  I updated my phone to the new operating system, as well as some downloaded the latest version of iTunes available.

• Windows 7 Windows Update doesn't load after installation of Windows 7 Service Pack Beta, then Outlook 2010 (Outlook 2010 has attempted to change Microsoft Update, after 24 hours, I rebooted the computer) and now, Windows Update does not work.

  Windows 7 Professional 64 bit

  Windows 7 Service Pack (so that I don't get a bunch of file wrong mistakes of corruption when using svn)

  Outlook 2010 (it works but I had to restart Windows forcefully during the first round as she tried to change the update settings)

  Now I can not install XPMode and cannot run Windows Update.  There is no error, no errors in the log of events, loading just perpetually for initial load of XP Mode or Windows Update.

  How can I fix Windows Update?

  In this forum, you will find support for Win7 SP1 RC: http://social.technet.microsoft.com/Forums/en/w7itproSP/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB2817361 and KB2817421 security updates are not installed

  PC family operating system XP Edition SP3 with all essential MS updates installed (with the exception of KB982381 19/12/2011 which will not reinstall and I understand has been successful). Office 2003 Pro. installed.

  Problem
  Security update (may 2013) for Word Viewer 2003 KB2817361 also be updated for Office 2003 KB2817421 will not be installed. The ball won't go away. It makes no mention of the update for Word Viewer, but the fact of Advisor Barlac.
  I tried MS Response Desk for no result also from other sites.
  Someone suggested to install the updates in "Safe Mode", but MS do advise not just for a good reason.

  desbroom

  June 29, 2013

  Manually download and try to install. If this isn't the case, I had something to install.

  Update for Office 2003 (KB2817421) security

  EDIT: I found a Word Viewer, which replaces the 2003 one. It is probably not need to patch.

  http://www.Microsoft.com/download/details.aspx?ID=4

  Uninstall your Word Viewer and install this one.

• Error code: 641 installation of Windows and Microsoft Silverlight updates does not

  Original title: problem downloading Windows updates

  Windows Update keeps a failure.  Says he has met the code 641. Also Microsoft Silverlight does not. Impossible to uninstall or reinstall.
  At some point, I think that it says cannot find windows install

  Larry

  Hi Larry,

  You can try the following steps and check if it helps.

  Method 1:

  You can view the history of update to discover the update has failed as a result of the article:

  See the Windows updates are installed

  Method 2:

  You can also read the following article to reset the Windows Update components and check.

  How to reset the Windows Update components?

  About Silverlight, you can try the steps in the following article.

  What is the complete error message you get?

  You can read the following article and try the troubleshooting steps to solve the problem of Windows Installer.

  Problems installing and uninstalling programs on Windows computers

  Hope this information is useful.

• My Dell computer has been disconnected for more than a year, and now Vista updates will not be installed.

  I have a Dell Inspiron 1501 which has been offline for over a year and now will not update Vista install. The security updates, 90% will be installed, but all others fail. Contact Dell or Microsoft?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• 8.1 and boot up update is not completed

  I have a hp Pavilion G6 and I've used it since August.

  I am trying to update to 8.1 and it downloads the update before shutdown to restart.

  But when it starts again, it remains on the development phase on boot HP.

  I've left to himself for the last two hours with absolutely no change.

  It is the second time it happens, the last time, after an hour I turned it off manually.

  Any help here?

  Hello

  I understand how frustrating it can be when things do not work as expected.

  I suggest you follow these methods and check if it helps.

  Method 1:

  If you have connected an external equipment to the laptop, please log out and then try to start.

  
  Method 2:
  If the problem persists, I recommend you to do an auto repair.

  Auto repair is a Windows 8 system recovery tool that can fix certain problems, such as missing or damaged system files.

  To run auto repair on follow computer Windows 8 as follows:

  a. Insert the installation of Windows 8 for example (USB or DVD) media and restart your computer.

  b. press on the key F12 (usually it's F12, but it may differ between computer manufacturers) and choose the drive in which you inserted into the installation media.

  c. once the Windows Setup window appears, follow these steps:

  d. click Next and select repair your computer.

  e. you will see an option to choose and then a blue screen. Choose the Troubleshooting option and select Advanced Options.

  f. choose automatic repair and follow the instructions on the screen.

  If you are still not able to start, so please click on this link and follow the advice given by Madeni K N.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/IM-installing-Windows-81-and-after-a-reboot-it-has/1825e56d-02f0-4D50-8f38-fb4a7998560d

  Let us know if it helps. If the problem persists, we would be happy to help you.